The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the printf of an error message and optimized the handling
process of ret.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Deleted a dbg function because this function has the risk of
address leakage. In addition, this function is only used for
debugging in the early stage and is not required in the future.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Disallow registration of two algorithms with identical driver names.

Cc: <stable@vger.kernel.org>
Reported-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a load_device_defaults() function pointer to struct
idxd_driver_data, which if defined, will be called when an idxd device
is probed and will allow the idxd device to be configured with default
values.

The load_device_defaults() function is passed an idxd device to work
with to set specific device attributes.

Also add a load_device_defaults() implementation IAA devices; future
patches would add default functions for other device types such as
DSA.

The way idxd device probing works, if the device configuration is
valid at that point e.g. at least one workqueue and engine is properly
configured then the device will be enabled and ready to go.

The IAA implementation, idxd_load_iaa_device_defaults(), configures a
single workqueue (wq0) for each device with the following default
values:

      mode     	        "dedicated"
      threshold		0
      size		Total WQ Size from WQCAP
      priority		10
      type		IDXD_WQT_KERNEL
      group		0
      name              "iaa_crypto"
      driver_name       "crypto"

Note that this now adds another configuration step for any users that
want to configure their own devices/workqueus with something different
in that they'll first need to disable (in the case of IAA) wq0 and the
device itself before they can set their own attributes and re-enable,
since they've been already been auto-enabled.  Note also that in order
for the new configuration to be applied to the deflate-iaa crypto
algorithm the iaa_crypto module needs to unregister the old version,
which is accomplished by removing the iaa_crypto module, and
re-registering it with the new configuration by reinserting the
iaa_crypto module.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for optional debugfs statistics support for the IAA
Compression Accelerator.  This is enabled by the kernel config item:

  CRYPTO_DEV_IAA_CRYPTO_STATS

When enabled, the IAA crypto driver will generate statistics which can
be accessed at /sys/kernel/debug/iaa-crypto/.

See Documentation/driver-api/crypto/iax/iax-crypto.rst for details.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The existing iaa crypto async support provides an implementation that
satisfies the interface but does so in a synchronous manner - it fills
and submits the IDXD descriptor and then waits for it to complete
before returning.  This isn't a problem at the moment, since all
existing callers (e.g. zswap) wrap any asynchronous callees in a
synchronous wrapper anyway.

This change makes the iaa crypto async implementation truly
asynchronous: it fills and submits the IDXD descriptor, then returns
immediately with -EINPROGRESS.  It also sets the descriptor's 'request
completion irq' bit and sets up a callback with the IDXD driver which
is called when the operation completes and the irq fires.  The
existing callers such as zswap use synchronous wrappers to deal with
-EINPROGRESS and so work as expected without any changes.

This mode can be enabled by writing 'async_irq' to the sync_mode
iaa_crypto driver attribute:

  echo async_irq > /sys/bus/dsa/drivers/crypto/sync_mode

Async mode without interrupts (caller must poll) can be enabled by
writing 'async' to it:

  echo async > /sys/bus/dsa/drivers/crypto/sync_mode

The default sync mode can be enabled by writing 'sync' to it:

  echo sync > /sys/bus/dsa/drivers/crypto/sync_mode

The sync_mode value setting at the time the IAA algorithms are
registered is captured in each algorithm's crypto_ctx and used for all
compresses and decompresses when using a given algorithm.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch registers the deflate-iaa deflate compression algorithm and
hooks it up to the IAA hardware using the 'fixed' compression mode
introduced in the previous patch.

Because the IAA hardware has a 4k history-window limitation, only
buffers <= 4k, or that have been compressed using a <= 4k history
window, are technically compliant with the deflate spec, which allows
for a window of up to 32k.  Because of this limitation, the IAA fixed
mode deflate algorithm is given its own algorithm name, 'deflate-iaa'.

With this change, the deflate-iaa crypto algorithm is registered and
operational, and compression and decompression operations are fully
enabled following the successful binding of the first IAA workqueue
to the iaa_crypto sub-driver.

when there are no IAA workqueues bound to the driver, the IAA crypto
algorithm can be unregistered by removing the module.

A new iaa_crypto 'verify_compress' driver attribute is also added,
allowing the user to toggle compression verification.  If set, each
compress will be internally decompressed and the contents verified,
returning error codes if unsuccessful.  This can be toggled with 0/1:

  echo 0 > /sys/bus/dsa/drivers/crypto/verify_compress

The default setting is '1' - verify all compresses.

The verify_compress value setting at the time the algorithm is
registered is captured in the algorithm's crypto_ctx and used for all
compresses when using the algorithm.

[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Define an in-kernel API for adding and removing compression modes,
which can be used by kernel modules or other kernel code that
implements IAA compression modes.

Also add a separate file, iaa_crypto_comp_fixed.c, containing huffman
tables generated for the IAA 'fixed' compression mode.  Future
compression modes can be added in a similar fashion.

One or more crypto compression algorithms will be created for each
compression mode, each of which can be selected as the compression
algorithm to be used by a particular facility.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The iaa compression/decompression algorithms in later patches need a
way to retrieve an appropriate IAA workqueue depending on how close
the associated IAA device is to the current cpu.

For this purpose, add a per-cpu array of workqueues such that an
appropriate workqueue can be retrieved by simply accessing the per-cpu
array.

Whenever a new workqueue is bound to or unbound from the iaa_crypto
driver, the available workqueues are 'rebalanced' such that work
submitted from a particular CPU is given to the most appropriate
workqueue available.  There currently isn't any way for the user to
tweak the way this is done internally - if necessary, knobs can be
added later for that purpose.  Current best practice is to configure
and bind at least one workqueue for each IAA device, but as long as
there is at least one workqueue configured and bound to any IAA device
in the system, the iaa_crypto driver will work, albeit most likely not
as efficiently.

[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The Intel Analytics Accelerator (IAA) is a hardware accelerator that
provides very high thoughput compression/decompression compatible with
the DEFLATE compression standard described in RFC 1951, which is the
compression/decompression algorithm exported by this module.

Users can select IAA compress/decompress acceleration by specifying
one of the deflate-iaa* algorithms as the compression algorithm to use
by whatever facility allows asynchronous compression algorithms to be
selected.

For example, zswap can select the IAA fixed deflate algorithm
'deflate-iaa' via:

  # echo deflate-iaa > /sys/module/zswap/parameters/compressor

This patch adds iaa_crypto as an idxd sub-driver and tracks iaa
devices and workqueues as they are probed or removed.

[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Because the IAA Compression Accelerator requires significant user
setup in order to be used properly, this adds documentation on the
iaa_crypto driver including setup, usage, and examples.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Create a lightweight callback interface to allow idxd sub-drivers to
be notified when work sent to idxd wqs has completed.

For a sub-driver to be notified of work completion, it needs to:

  - Set the descriptor's 'Request Completion Interrupt'
    (IDXD_OP_FLAG_RCI)

  - Set the sub-driver desc_complete() callback when registering the
    sub-driver e.g.:

      struct idxd_device_driver my_drv = {
            .probe = my_probe,
            .desc_complete = my_complete,
      }

  - Set the sub-driver-specific context in the sub-driver's descriptor
    e.g:

      idxd_desc->crypto.req = req;
      idxd_desc->crypto.tfm = tfm;
      idxd_desc->crypto.src_addr = src_addr;
      idxd_desc->crypto.dst_addr = dst_addr;

When the work completes and the completion irq fires, idxd will invoke
the desc_complete() callback with pointers to the descriptor, context,
and completion_type.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the accessors idxd_wq_set_private() and idxd_wq_get_private()
allowing users to set and retrieve a private void * associated with an
idxd_wq.

The private data is stored in the idxd_dev.conf_dev associated with
each idxd_wq.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

To allow idxd sub-drivers to access the wq resource management
functions, export them.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

To allow idxd sub-drivers to access the descriptor management
functions, export them.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rename drv_enable_wq and drv_disable_wq to idxd_drv_enable_wq and
idxd_drv_disable_wq respectively, so that they're no longer too
generic to be exported.  This also matches existing naming within the
idxd driver.

And to allow idxd sub-drivers to enable and disable wqs, export them.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support to allow an external driver to be registered to the
dsa_bus_type and also auto-loaded.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Current dev_err_probe will return 0 instead of proper error code if
driver failed to get irq number. Fix the return code.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

NULL check before kfree_sensitive function is not needed.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311301702.LxswfETY-lkp@intel.com/Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Unlike algif_aead which is always issued in one go (thus limiting
the maximum size of the request), algif_skcipher has always allowed
unlimited input data by cutting them up as necessary and feeding
the fragments to the underlying algorithm one at a time.

However, because of deficiencies in the API, this has been broken
for most stream ciphers such as arc4 or chacha.  This is because
they have an internal state in addition to the IV that must be
preserved in order to continue processing.

Fix this by using the new skcipher state API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The arc4 algorithm has always had internal state.  It's been buggy
from day one in that the state has been stored in the shared tfm
object.  That means two users sharing the same tfm will end up
affecting each other's output, or worse, they may end up with the
same output.

Fix this by declaring an internal state and storing the state there
instead of within the tfm context.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds code to the skcipher/lskcipher API to make use
of the internal state if present.  In particular, the skcipher
lskcipher wrapper will allocate a buffer for the IV/state and
feed that to the underlying lskcipher algorithm.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Unlike chaining modes such as CBC, stream ciphers other than CTR
usually hold an internal state that must be preserved if the
operation is to be done piecemeal.  This has not been represented
in the API, resulting in the inability to split up stream cipher
operations.

This patch adds the basic representation of an internal state to
skcipher and lskcipher.  In the interest of backwards compatibility,
the default has been set such that existing users are assumed to
be operating in one go as opposed to piecemeal.

With the new API, each lskcipher/skcipher algorithm has a new
attribute called statesize.  For skcipher, this is the size of
the buffer that can be exported or imported similar to ahash.
For lskcipher, instead of providing a buffer of ivsize, the user
now has to provide a buffer of ivsize + statesize.

Each skcipher operation is assumed to be final as they are now,
but this may be overridden with a request flag.  When the override
occurs, the user may then export the partial state and reimport
it later.

For lskcipher operations this is reversed.  All operations are
not final and the state will be exported unless the FINAL bit is
set.  However, the CONT bit still has to be set for the state
to be used.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

    
Remove the unused algorithms CFB/OFB.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

    
Remove test vectors for CFB/OFB.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

    
Remove tests for CFB/OFB.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

    
Remove the unused OFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

    
Remove the unused OFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the unused CFB/OFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

    
Remove the unused CFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

    
Remove the unused CFB implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>