Seems like disable can race with complete_flip() in process of disabling
a crtc, leading to:

[   49.065364] Call trace:
[   49.071441] [<ffffffc00041d5a0>] mdp5_ctl_blend+0x20/0x1c0
[   49.073788] [<ffffffc00041ebcc>] mdp5_crtc_disable+0x3c/0xa8
[   49.079348] [<ffffffc0003e7854>] disable_outputs.isra.4+0x11c/0x220
[   49.085164] [<ffffffc0003e7afc>] drm_atomic_helper_commit_modeset_disables+0x14/0x38
[   49.091155] [<ffffffc000425c80>] complete_commit+0x40/0xb8
[   49.099136] [<ffffffc0004260ac>] msm_atomic_commit+0x364/0x398
[   49.104430] [<ffffffc00040a614>] drm_atomic_commit+0x3c/0x70
[   49.110249] [<ffffffc0003e67b8>] drm_atomic_helper_set_config+0x1b0/0x3e0
[   49.116065] [<ffffffc0003f99bc>] drm_mode_set_config_internal+0x64/0xf8
[   49.122746] [<ffffffc0003fa624>] drm_framebuffer_remove+0xe4/0x128
[   49.129171] [<ffffffc0003feaf8>] drm_mode_rmfb+0xc0/0x100
[   49.135420] [<ffffffc0003efba8>] drm_ioctl+0x258/0x4d0
[   49.140889] [<ffffffc0001b0388>] do_vfs_ioctl+0x338/0x5d0
[   49.145921] [<ffffffc0001b06a8>] SyS_ioctl+0x88/0xa0

It makes no sense to free the ctl without disabling all stages, so lets
just move them together to avoid the crash.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

As found in apq8016 (used in DragonBoard 410c) and msm8916.

Note that numerically a306 is actually 307 (since a305c already claimed
306).  Nice and confusing.
Signed-off-by: Rob Clark <robdclark@gmail.com>

A few spots in the driver have support for downstream android
CONFIG_MSM_BUS_SCALING.  This is mainly to simplify backporting the
driver for various devices which do not have sufficient upstream
kernel support.  But the intentionally dead code seems to cause
some confusion.  Rename the #define to make this more clear.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Using fb modifier flag, support NV12MT format in MDP4.

v2:
- rework the modifier's description [Daniel Vetter's comment]
- drop .set_mode_config() callback [Rob Clark's comment]
v3:
- change VENDOR's name and restrict usage to NV12 [pointed by Daniel]
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Somehow this got lost when msm atomic support was first merged.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Dump a bit more info when the GPU hangs, without having hang_debug
enabled (which dumps a *lot* of registers).  Also dump the scratch
registers, as they are useful for determining where in the cmdstream
the GPU hung (and they seem always safe to read when GPU has hung).

Note that the freedreno gallium driver emits increasing counter values
to SCRATCH6 (to identify tile #) and SCRATCH7 (to identify draw #), so
these two in particular can be used to "triangulate" where in the
cmdstream the GPU hung.
Signed-off-by: Rob Clark <robdclark@gmail.com>

The goto is correct, and we never reach the return statement so just
delete the dead code.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

virtio_gpu_alloc_object() returns an error pointer, it never returns
NULL.

Fixes: dc5698e8 ('Add virtio gpu driver.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

More fixes for amdgpu for 4.2.  We've integrated Jerome's comments
about the interface among other things.  I'll be on vacation next week
so Christian will be handling any updates next week.

* 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux: (23 commits)
  drm/amdgpu: fix a amdgpu_dpm=0 bug
  drm/amdgpu: don't enable/disable display twice on suspend/resume
  drm/amdgpu: fix UVD/VCE VM emulation
  drm/amdgpu: enable vce powergating
  drm/amdgpu/iceland: don't call smu_init on resume
  drm/amdgpu/tonga: don't call smu_init on resume
  drm/amdgpu/cz: don't call smu_init on resume
  drm/amdgpu: update to latest gfx8 golden register settings
  drm/amdgpu: whitespace cleanup in gmc8 golden regs
  drm/admgpu: move XDMA golden registers to dce code
  drm/amdgpu: fix the build on big endian
  drm/amdgpu: cleanup UAPI comments
  drm/amdgpu: remove AMDGPU_CTX_OP_STATE_RUNNING
  drm/amdgpu: remove the VI hardware semaphore in ring sync
  drm/amdgpu: set the gfx config properly for all CZ variants (v2)
  drm/amdgpu: also print the pci revision when printing the pci ids
  drm/amdgpu: cleanup VA IOCTL
  drm/amdgpu: fix saddr handling in amdgpu_vm_bo_unmap
  drm/amdgpu: fix amdgpu_vm_bo_map
  drm/amdgpu: remove unused AMDGPU_IB_FLAG_GDS
  ...

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

We were doing it in the common code and in the IP specific code.
Remove the IP specific code.  The common code handles the
ordering properly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Enable VCE dpm and powergating. VCE dpm dynamically scales the VCE clocks on
demand.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.
Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.
Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.
Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Already moved other display registers.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some leftover copy and pastes from radeon that never
got updated.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Not used.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: David Zhang <david1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

Need to adjust the number of CUs and RBs.

v2: get proper values
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The driver makes use of this information so print if to aid in
debugging.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove the unnecessary returned status and make the IOCTL write only.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

We need to reset the bo_va address, otherwise new mappings
wouldn't be updated in the page table.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu submits both kernel and user fences, but just need one interrupt,
disable user fence interrupt and don't effect user fence.

v2: fix merge error
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: monk liu <monk.liu@amd.com>

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>

This is the big pull request for amdgpu, the new driver for VI+ AMD
asics.  I currently supports Tonga, Iceland, and Carrizo and also
contains a Kconfig option to build support for CI parts for testing.

All major functionality is supported (displays, gfx, compute, dma,
video decode/encode, etc.).  Power management is working on Carrizo,
but is still being worked on for Tonga and Iceland.

* 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux: (106 commits)
  drm/amdgpu: only support IBs in the buffer list (v2)
  drm/amdgpu: add vram_type and vram_bit_width for interface query (v2)
  drm/amdgpu: add ib_size/start_alignment interface query
  drm/amdgpu: add me/ce/pfp_feature_version interface query
  drm/amdgpu add ce_ram_size for interface query
  drm/amdgpu add max_memory_clock for interface query (v2)
  drm/amdgpu: add hdp flush for gfx8 compute ring
  drm/amdgpu: fix no hdp flush for compute ring
  drm/amdgpu: add HEVC/H.265 UVD support
  drm/amdgpu: stop loading firmware with pm.mutex locked
  drm/amdgpu: remove mclk_lock
  drm/amdgpu: fix description of vm_size module parameter (v2)
  drm/amdgpu: remove all sh mem register modification in vm flush
  drm/amdgpu: rename GEM_OP_SET_INITIAL_DOMAIN -> GEM_OP_SET_PLACEMENT
  drm/amdgpu: fence should be added to shared slot
  drm/amdgpu: sync fence of clear_invalids (v2)
  drm/amdgpu: max_pde_used usage should be under protect
  drm/amdgpu: fix bug of vm_bo_map (v2)
  drm/amdgpu: implement the allocation range (v3)
  drm/amdgpu: rename amdgpu_ip_funcs to amd_ip_funcs (v2)
  ...

This function could return a NULL pointer in case of handle not
present and in case of out of memory conditions however caller
function always returned EINVAL error hiding a possible ENOMEM.
This patch change the function to return the error instead to
be able to propagate the error instead of assuming EINVAL.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

In qxlhw_handle_to_bo we incremented counters twice, one time for release object
and one for reloc_info.
In the main function however reloc_info references was drop much earlier than
release so keeping the pointer only on release is safe and make cleaning
process easier.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

qxl_bo structure has two reference counters, one in the GEM object and
another in the TTM object. The GEM object keep a counter to the TTM object
so when GEM counter reached zero the TTM counter (using qxl_bo_unref) was
decremented. The qxl object is fully freed (both GEM and TTM part are cleaned)
when the TTM counter reach zero.
One issue was that surface idr structure has no owning on qxl_bo objects however
it contains a pointer to qxl_bo object. This caused some nasty race condition
for instance qxl_bo object was reaped even after counter was already zero.
This patch fix these races moving main counter (the one used by qxl_bo_(un)ref)
to GEM object which cleanup routine (qxl_gem_object_free) remove the idr pointer
(using qxl_surface_evict) when the counters are still valid.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Enable format string checks for qxl_io_log and remove resulting warnings
which could lead to memory errors on different platform or just printing
wrong information.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>