Pull irq fixes from Thomas Gleixner:
 "Two reverts addressing regressions of the Xilinx interrupt controller
  driver which affected the PPC users"

* tag 'irq-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "irqchip/xilinx: Enable generic irq multi handler"
  Revert "irqchip/xilinx: Do not call irq_set_default_host()"

Commit 9255782f ("sysfs: Wrap __compat_only_sysfs_link_entry_to_kobj
function to change the symlink name") made this function a wrapper
around a new non-underscored function, which is a bit odd.  The normal
naming convention is the other way around: the underscored function is
the wrappee, and the non-underscored function is the wrapper.

There's only one single user (well, two call-sites in that user) of the
more limited double underscore version of this function, so just remove
the oddly named wrapper entirely and just add the extra NULL argument to
the user.

I considered just doing that in the merge, but that tends to make
history really hard to read.

Link: https://lore.kernel.org/lkml/CAHk-=wgkkmNV5tMzQDmPAQuNJBuMcry--Jb+h8H1o4RA3kF7QQ@mail.gmail.com/
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull powerpc updates from Michael Ellerman:
 "Slightly late as I had to rebase mid-week to insert a bug fix:

   - A large series from Nick for 64-bit to further rework our exception
     vectors, and rewrite portions of the syscall entry/exit and
     interrupt return in C. The result is much easier to follow code
     that is also faster in general.

   - Cleanup of our ptrace code to split various parts out that had
     become badly intertwined with #ifdefs over the years.

   - Changes to our NUMA setup under the PowerVM hypervisor which should
     hopefully avoid non-sensical topologies which can lead to warnings
     from the workqueue code and other problems.

   - MAINTAINERS updates to remove some of our old orphan entries and
     update the status of others.

   - Quite a few other small changes and fixes all over the map.

  Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
  Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
  Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
  Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
  Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
  Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
  Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
  Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
  Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
  Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
  Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
  Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
  Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
  Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
  Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
  Datwyler, Vaibhav Jain, YueHaibing"

* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
  powerpc: Make setjmp/longjmp signature standard
  powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
  powerpc: Suppress .eh_frame generation
  powerpc: Drop -fno-dwarf2-cfi-asm
  powerpc/32: drop unused ISA_DMA_THRESHOLD
  powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
  selftests/powerpc: Fix try-run when source tree is not writable
  powerpc/vmlinux.lds: Explicitly retain .gnu.hash
  powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
  powerpc/ptrace: create ppc_gethwdinfo()
  powerpc/ptrace: create ptrace_get_debugreg()
  powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
  powerpc/ptrace: move register viewing functions out of ptrace.c
  powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
  powerpc/ptrace: split out SPE related functions.
  powerpc/ptrace: split out ALTIVEC related functions.
  powerpc/ptrace: split out VSX related functions.
  powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
  powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
  powerpc/ptrace: remove unused header includes
  ...

Pull /dev/random updates from Ted Ts'o:

 - Improve getrandom and /dev/random's support for those arm64
   architecture variants that have RNG instructions.

 - Use batched output from CRNG instead of CPU's RNG instructions for
   better performance.

 - Miscellaneous bug fixes.

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: avoid warnings for !CONFIG_NUMA builds
  random: fix data races at timer_rand_state
  random: always use batched entropy for get_random_u{32,64}
  random: Make RANDOM_TRUST_CPU depend on ARCH_RANDOM
  arm64: add credited/trusted RNG support
  random: add arch_get_random_*long_early()
  random: split primary/secondary crng init paths

Pull ext4 updates from Ted Ts'o:

 - Replace ext4's bmap and iopoll implementations to use iomap.

 - Clean up extent tree handling.

 - Other cleanups and miscellaneous bug fixes

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (31 commits)
  ext4: save all error info in save_error_info() and drop ext4_set_errno()
  ext4: fix incorrect group count in ext4_fill_super error message
  ext4: fix incorrect inodes per group in error message
  ext4: don't set dioread_nolock by default for blocksize < pagesize
  ext4: disable dioread_nolock whenever delayed allocation is disabled
  ext4: do not commit super on read-only bdev
  ext4: avoid ENOSPC when avoiding to reuse recently deleted inodes
  ext4: unregister sysfs path before destroying jbd2 journal
  ext4: check for non-zero journal inum in ext4_calculate_overhead
  ext4: remove map_from_cluster from ext4_ext_map_blocks
  ext4: clean up ext4_ext_insert_extent() call in ext4_ext_map_blocks()
  ext4: mark block bitmap corrupted when found instead of BUGON
  ext4: use flexible-array member for xattr structs
  ext4: use flexible-array member in struct fname
  Documentation: correct the description of FIEMAP_EXTENT_LAST
  ext4: move ext4_fiemap to use iomap framework
  ext4: make ext4_ind_map_blocks work with fiemap
  ext4: move ext4 bmap to use iomap infrastructure
  ext4: optimize ext4_ext_precache for 0 depth
  ext4: add IOMAP_F_MERGED for non-extent based mapping
  ...

Pull clk updates from Stephen Boyd:
 "There's not much to see in the core framework this time around.
  Instead the majority of the diff is the normal collection of driver
  additions for new SoCs and non-critical clk data fixes and updates.
  The framework must be middle aged.

  The two biggest directories in the diffstat show that the Qualcomm and
  Unisoc support added a handful of big drivers for new SoCs but that's
  not really the whole story because those new drivers tend to add large
  numbers of lines of clk data. There's a handful of AT91 clk drivers
  added this time around too and a bunch of improvements to drivers like
  the i.MX driver. All around lots of updates and fixes in various clk
  drivers which is good to see.

  The core framework has only one real major change which has been
  baking in next for the past couple months. It fixes the framework so
  that it stops caching a clk's phase when the phase clk_op returns an
  error. Before this change we would consider some negative errno as a
  phase and that just doesn't make sense.

  Core:
   - Don't show clk phase when it is invalid

  New Drivers:
   - Add support for Unisoc SC9863A clks
   - Qualcomm SM8250 RPMh and MSM8976 RPM clks
   - Qualcomm SM8250 Global Clock Controller (GCC) support
   - Qualcomm SC7180 Modem Clock Controller (MSS CC) support
   - EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs
   - Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and
     at91sam9g45 SoCs

  Updates:
   - GPU GX GDSC support on Qualcomm sc7180
   - Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers
   - A series from Anson to convert i.MX8 clock bindings to json-schema
   - Update i.MX pll14xx driver to include new frequency entries for
     pll1443x table, and return error for invalid PLL type
   - Add missing of_node_put() call for a number of i.MX clock drivers
   - Drop flag CLK_IS_CRITICAL from 'A53_CORE' mux clock, as we already
     have the flag on its child cpu clock
   - Fix a53 cpu clock for i.MX8 drivers to get it source from ARM PLL
     via CORE_SEL slice, and source from A53 CCM clk root when we need
     to change ARM PLL frequency. Thus, we can support core running
     above 1GHz safely
   - Update i.MX pfdv2 driver to check zero rate and use determine_rate
     for getting the best rate
   - Add CLKO2 for imx8mm, SNVS clock for imx8mn, and PXP clock for
     imx7d
   - Remove PMC clks from Tegra clk driver
   - Improved clock/reset handling for the Renesas R-Car USB2 Clock
     Selector
   - Conversion to json-schema of the Renesas CPG/MSSR DT bindings
   - Add Crypto clocks on Renesas R-Car M3-W/W+, M3-N, E3, and D3
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car H3, M3-W/W+, and
     M3-N
   - Update Amlogic audio clock gate hierarchy for meson8 and gxbb
   - Update Amlogic g12a spicc clock sources
   - Support for Ingenic X1000 TCU clks"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (146 commits)
  clk: sprd: fix to get a correct ibias of pll
  dt-bindings: imx8mm-clock: Fix the file path
  dt-bindings: imx8mq-clock: Fix the file path
  clk: qcom: rpmh: Drop unnecessary semicolons
  clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd()
  clk: tegra: Use NULL for pointer initialization
  clk: sprd: add clocks support for SC9863A
  clk: sprd: support to get regmap from parent node
  clk: sprd: Add macros for referencing parents without strings
  clk: sprd: Add dt-bindings include file for SC9863A
  dt-bindings: clk: sprd: add bindings for sc9863a clock controller
  dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific
  clk: sprd: add gate for pll clocks
  MAINTAINERS: dt: update reference for arm-integrator.txt
  clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks
  clk: mmp2: Add clock for fifth SD HCI on MMP3
  dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3
  clk: mmp2: Add clocks for the thermal sensors
  dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors
  clk: mmp2: add the GPU clocks
  ...

Pull tracing updates from Steven Rostedt:
 "New tracing features:

   - The ring buffer is no longer disabled when reading the trace file.

     The trace_pipe file was made to be used for live tracing and
     reading as it acted like the normal producer/consumer. As the trace
     file would not consume the data, the easy way of handling it was to
     just disable writes to the ring buffer.

     This came to a surprise to the BPF folks who complained about lost
     events due to reading. This is no longer an issue. If someone wants
     to keep the old disabling there's a new option "pause-on-trace"
     that can be set.

   - New set_ftrace_notrace_pid file. PIDs in this file will not be
     traced by the function tracer.

     Similar to set_ftrace_pid, which makes the function tracer only
     trace those tasks with PIDs in the file, the set_ftrace_notrace_pid
     does the reverse.

   - New set_event_notrace_pid file. PIDs in this file will cause events
     not to be traced if triggered by a task with a matching PID.

     Similar to the set_event_pid file but will not be traced. Note,
     sched_waking and sched_switch events may still be traced if one of
     the tasks referenced by those events contains a PID that is allowed
     to be traced.

  Tracing related features:

   - New bootconfig option, that is attached to the initrd file.

     If bootconfig is on the command line, then the initrd file is
     searched looking for a bootconfig appended at the end.

   - New GPU tracepoint infrastructure to help the gfx drivers to get
     off debugfs (acked by Greg Kroah-Hartman)

  And other minor updates and fixes"

* tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
  tracing: Do not allocate buffer in trace_find_next_entry() in atomic
  tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid
  selftests/ftrace: Add test to test new set_event_notrace_pid file
  selftests/ftrace: Add test to test new set_ftrace_notrace_pid file
  tracing: Create set_event_notrace_pid to not trace tasks
  ftrace: Create set_ftrace_notrace_pid to not trace tasks
  ftrace: Make function trace pid filtering a bit more exact
  ftrace/kprobe: Show the maxactive number on kprobe_events
  tracing: Have the document reflect that the trace file keeps tracing enabled
  ring-buffer/tracing: Have iterator acknowledge dropped events
  tracing: Do not disable tracing when reading the trace file
  ring-buffer: Do not disable recording when there is an iterator
  ring-buffer: Make resize disable per cpu buffer instead of total buffer
  ring-buffer: Optimize rb_iter_head_event()
  ring-buffer: Do not die if rb_iter_peek() fails more than thrice
  ring-buffer: Have rb_iter_head_event() handle concurrent writer
  ring-buffer: Add page_stamp to iterator for synchronization
  ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance()
  ring-buffer: Have ring_buffer_empty() not depend on tracing stopped
  tracing: Save off entry when peeking at next entry
  ...

Pull keyrings fixes from David Howells:
 "Here's a couple of patches that fix a circular dependency between
  holding key->sem and mm->mmap_sem when reading data from a key.

  One potential issue is that a filesystem looking to use a key inside,
  say, ->readpages() could deadlock if the key being read is the key
  that's required and the buffer the key is being read into is on a page
  that needs to be fetched.

  The case actually detected is a bit more involved - with a filesystem
  calling request_key() and locking the target keyring for write - which
  could be being read"

* tag 'keys-fixes-20200329' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  KEYS: Avoid false positive ENOMEM error on key read
  KEYS: Don't write out to userspace while holding key semaphore

Pull drm hugepage support from Dave Airlie:
 "This adds support for hugepages to TTM and has been tested with the
  vmwgfx drivers, though I expect other drivers to start using it"

* tag 'drm-next-2020-04-03-1' of git://anongit.freedesktop.org/drm/drm:
  drm/vmwgfx: Hook up the helpers to align buffer objects
  drm/vmwgfx: Introduce a huge page aligning TTM range manager
  drm: Add a drm_get_unmapped_area() helper
  drm/vmwgfx: Support huge page faults
  drm/ttm, drm/vmwgfx: Support huge TTM pagefaults
  mm: Add vmf_insert_pfn_xxx_prot() for huge page-table entries
  mm: Split huge pages on write-notify or COW
  mm: Introduce vma_is_special_huge
  fs: Constify vma argument to vma_is_dax

Pull exfat filesystem from Al Viro:
 "Shiny new fs/exfat replacement for drivers/staging/exfat"

* 'work.exfat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  exfat: update file system parameter handling
  staging: exfat: make staging/exfat and fs/exfat mutually exclusive
  MAINTAINERS: add exfat filesystem
  exfat: add Kconfig and Makefile
  exfat: add nls operations
  exfat: add misc operations
  exfat: add exfat cache
  exfat: add bitmap operations
  exfat: add fat entry operations
  exfat: add file operations
  exfat: add directory operations
  exfat: add inode operations
  exfat: add super block operations
  exfat: add in-memory and on-disk structures and headers

Pull nfsd updates from Chuck Lever:

 - Fix EXCHANGE_ID response when NFSD runs in a container

 - A battery of new static trace points

 - Socket transports now use bio_vec to send Replies

 - NFS/RDMA now supports filesystems with no .splice_read method

 - Favor memcpy() over DMA mapping for small RPC/RDMA Replies

 - Add pre-requisites for supporting multiple Write chunks

 - Numerous minor fixes and clean-ups

[ Chuck is filling in for Bruce this time while he and his family settle
  into a new house ]

* tag 'nfsd-5.7' of git://git.linux-nfs.org/projects/cel/cel-2.6: (39 commits)
  svcrdma: Fix leak of transport addresses
  SUNRPC: Fix a potential buffer overflow in 'svc_print_xprts()'
  SUNRPC/cache: don't allow invalid entries to be flushed
  nfsd: fsnotify on rmdir under nfsd/clients/
  nfsd4: kill warnings on testing stateids with mismatched clientids
  nfsd: remove read permission bit for ctl sysctl
  NFSD: Fix NFS server build errors
  sunrpc: Add tracing for cache events
  SUNRPC/cache: Allow garbage collection of invalid cache entries
  nfsd: export upcalls must not return ESTALE when mountd is down
  nfsd: Add tracepoints for update of the expkey and export cache entries
  nfsd: Add tracepoints for exp_find_key() and exp_get_by_name()
  nfsd: Add tracing to nfsd_set_fh_dentry()
  nfsd: Don't add locks to closed or closing open stateids
  SUNRPC: Teach server to use xprt_sock_sendmsg for socket sends
  SUNRPC: Refactor xs_sendpages()
  svcrdma: Avoid DMA mapping small RPC Replies
  svcrdma: Fix double sync of transport header buffer
  svcrdma: Refactor chunk list encoders
  SUNRPC: Add encoders for list item discriminators
  ...

Pull RTC updates from Alexandre Belloni:
 "More cleanup this cycle, with the final goal of removing the
  rtc_time_to_tm and rtc_tm_to_time wrappers. All the drivers that have
  been modified for this now are ready for the end of times (whether it
  happens in 2033, 2038, 2106, 2127 or even 4052). There is also a
  single new driver and the usual fixes and features.

  Summary:

  Subsystem:

   - The rtc_time_to_tm and rtc_tm_to_time wrappers have finally been
     removed and only the 64bit version remain.

   - hctosys now works with drivers compiled as modules

  New driver:

   - MediaTek MT2712 SoC based RTC

  Drivers:

   - set range for 88pm860x, au1xxx, cpcap, da9052, davinci, ds1305,
     ds1374, mcp5121, pl030, pl031, pm8xxx, puv3, sa1100, sirfsoc,
     starfire, sun6i

   - ds1307: DS1388 oscillator failure detection and watchdog support

   - jz4740: JZ4760 support

   - pcf85063: clock out pin support

   - sun6i: external 32k oscillator is now optional, the range is now
     handled by the core, providing a solution for 2034"

* tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (87 commits)
  rtc: ds1307: check for failed memory allocation on wdt
  rtc: class: remove redundant assignment to variable err
  rtc: remove rtc_time_to_tm and rtc_tm_to_time
  rtc: sun6i: let the core handle rtc range
  rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64
  rtc: ds1307: add support for watchdog timer on ds1388
  rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64
  rtc: da9052: set range
  rtc: da9052: convert to devm_rtc_allocate_device
  rtc: imx-sc: Align imx sc msg structs to 4
  rtc: fsl-ftm-alarm: report alarm to core
  rtc: pcf85063: Add pcf85063 clkout control to common clock framework
  rtc: make definitions in include/uapi/linux/rtc.h actually useful for user space
  rtc: class: avoid unnecessary lookup in hctosys
  dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML
  rtc: jz4740: Rename vendor-specific DT properties
  rtc: jz4740: Add support for JZ4760 SoC
  rtc: class: support hctosys from modular RTC drivers
  rtc: pm8xxx: clear alarm register when alarm is not enabled
  rtc: omap: drop unused dt-bindings header
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO development for the v5.7 kernel cycle.

  Core and userspace API:

   - The userspace API KFIFOs have been imoproved with locks that do not
     block interrupts. This makes us better at getting events to
     userspace without blocking or disturbing new events arriving in the
     same time. This was reviewed by the KFIFO maintainer Stefani. This
     is a generic improvement which paves the road for similar
     improvements in other subsystems.

   - We provide a new ioctl() for monitoring changes in the line
     information, such as when multiple clients are taking lines and
     giving them back, possibly reconfiguring them in the process: we
     can now monitor that and not get stuck with stale static
     information.

   - An example tool 'gpio-watch' is provided to showcase this
     functionality.

   - Timestamps for events are switched to ktime_get_ns() which is
     monotonic. We previously had a 'realtime' stamp which could move
     forward and *backward* in time, which probably would just cause
     silent bugs and weird behaviour. In the long run we see two
     relevant timestamps: ktime_get_ns() or the timestamp sometimes
     provided by the GPIO hardware itself, if that exists.

   - Device Tree overlay support for GPIO hogs. On systems that load
     overlays, these overlays can now contain hogs, and will then be
     respected.

   - Handle pin control interaction with nonexisting pin ranges in the
     GPIO library core instead of in the individual drivers.

  New drivers:

   - New driver for the Mellanox BlueField 2 GPIO controller.

  Driver improvements:

   - Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO
     library and use this flag in the MT7621 driver.

   - Texas Instruments OMAP CPU power management improvements, such as
     blocking of idle on pending GPIO interrupts"

* tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits)
  Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()"
  pinctrl: Unconditionally assign .request()/.free()
  gpio: Unconditionally assign .request()/.free()
  gpio: export of_pinctrl_get to modules
  pinctrl: Define of_pinctrl_get() dummy for !PINCTRL
  gpio: Rename variable in core APIs
  gpio: Avoid using pin ranges with !PINCTRL
  gpiolib: Remove unused gpio_chip parameter from gpio_set_bias()
  gpiolib: Pass gpio_desc to gpio_set_config()
  gpiolib: Introduce gpiod_set_config()
  tools: gpio: Fix out-of-tree build regression
  gpio: gpiolib: fix a doc warning
  gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1
  gpio: tegra186: Add support for pin ranges
  gpio: Support GPIO controllers without pin-ranges
  ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro
  gpio: brcmstb: support gpio-line-names property
  tools: gpio: Fix typo in gpio-utils
  tools: gpio-hammer: Apply scripts/Lindent and retain good changes
  gpiolib: gpio_name_to_desc: factor out !name check
  ...

Pull dma-mapping updates from Christoph Hellwig:

 - fix an integer overflow in the coherent pool (Kevin Grandemange)

 - provide support for in-place uncached remapping and use that for
   openrisc

 - fix the arm coherent allocator to take the bus limit into account

* tag 'dma-mapping-5.7' of git://git.infradead.org/users/hch/dma-mapping:
  ARM/dma-mapping: merge __dma_supported into arm_dma_supported
  ARM/dma-mapping: take the bus limit into account in __dma_alloc
  ARM/dma-mapping: remove get_coherent_dma_mask
  openrisc: use the generic in-place uncached DMA allocator
  dma-direct: provide a arch_dma_clear_uncached hook
  dma-direct: make uncached_kernel_address more general
  dma-direct: consolidate the error handling in dma_direct_alloc_pages
  dma-direct: remove the cached_kernel_address hook
  dma-coherent: fix integer overflow in the reserved-memory dma allocation

Pull thread updates from Christian Brauner:
 "The main change for this cycle was the extension for clone3() to
  support spawning processes directly into cgroups via CLONE_INTO_CGROUP
  (commit ef2c41cf: "clone3: allow spawning processes
  into cgroups").

  But since I had to touch kernel/cgroup/ quite a bit I had Tejun route
  that through his tree this time around to make it easier for him to
  handle other changes.

  So here is just the unexciting leftovers: a regression test for the
  ENOMEM regression we fixed in commit b26ebfe1 ("pid: Fix error
  return value in some cases") verifying that we report ENOMEM when
  trying to create a new process in a pid namespace whose init
  process/subreaper has already exited"

* tag 'threads-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  selftests: add pid namespace ENOMEM regression test

Pull VFIO updates from Alex Williamson:

 - vfio-pci SR-IOV support (Alex Williamson)

 - vfio DMA read/write interface (Yan Zhao)

 - Fix vfio-platform erroneous IRQ error log (Eric Auger)

 - Fix shared ATSD support for NVLink on POWER (Sam Bobroff)

 - Fix init error without CONFIG_IOMMU_DMA (Andre Przywara)

* tag 'vfio-v5.7-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: Ignore -ENODEV when getting MSI cookie
  vfio-pci/nvlink2: Allow fallback to ibm,mmio-atsd[0]
  vfio/pci: Cleanup .probe() exit paths
  vfio/pci: Remove dev_fmt definition
  vfio/pci: Add sriov_configure support
  vfio: Introduce VFIO_DEVICE_FEATURE ioctl and first user
  vfio/pci: Introduce VF token
  vfio/pci: Implement match ops
  vfio: Include optional device match in vfio_device_ops callbacks
  vfio: avoid inefficient operations on VFIO group in vfio_pin/unpin_pages
  vfio: introduce vfio_dma_rw to read/write a range of IOVAs
  vfio: allow external user to get vfio group from device
  vfio: platform: Switch to platform_get_irq_optional()

Pull s390 updates from Vasily Gorbik:

 - Update maintainers. Niklas Schnelle takes over zpci and Vineeth
   Vijayan common io code.

 - Extend cpuinfo to include topology information.

 - Add new extended counters for IBM z15 and sampling buffer allocation
   rework in perf code.

 - Add control over zeroing out memory during system restart.

 - CCA protected key block version 2 support and other
   fixes/improvements in crypto code.

 - Convert to new fallthrough; annotations.

 - Replace zero-length arrays with flexible-arrays.

 - QDIO debugfs and other small improvements.

 - Drop 2-level paging support optimization for compat tasks. Varios mm
   cleanups.

 - Remove broken and unused hibernate / power management support.

 - Remove fake numa support which does not bring any benefits.

 - Exclude offline CPUs from CPU topology masks to be more consistent
   with other architectures.

 - Prevent last branching instruction address leaking to userspace.

 - Other small various fixes and improvements all over the code.

* tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits)
  s390/mm: cleanup init_new_context() callback
  s390/mm: cleanup virtual memory constants usage
  s390/mm: remove page table downgrade support
  s390/qdio: set qdio_irq->cdev at allocation time
  s390/qdio: remove unused function declarations
  s390/ccwgroup: remove pm support
  s390/ap: remove power management code from ap bus and drivers
  s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc
  s390/mm: cleanup arch_get_unmapped_area() and friends
  s390/ism: remove pm support
  s390/cio: use fallthrough;
  s390/vfio: use fallthrough;
  s390/zcrypt: use fallthrough;
  s390: use fallthrough;
  s390/cpum_sf: Fix wrong page count in error message
  s390/diag: fix display of diagnose call statistics
  s390/ap: Remove ap device suspend and resume callbacks
  s390/pci: Improve handling of unset UID
  s390/pci: Fix zpci_alloc_domain() over allocation
  s390/qdio: pass ISC as parameter to chsc_sadc()
  ...

Pull ARC updates from Vineet Gupta:

 - Support for DSP enabled userspace (save/restore regs)

 - Misc other platform fixes

* tag 'arc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: allow userspace DSP applications to use AGU extensions
  ARC: add support for DSP-enabled userspace applications
  ARC: handle DSP presence in HW
  ARC: add helpers to sanitize config options
  ARC: [plat-axs10x]: PGU: remove unused encoder-slave property

Pull ARM devicetree updates from Arnd Bergmann:
 "Most of the commits are for additional hardware support and minor
  fixes for existing machines for all the usual platforms: qcom,
  amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
  uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
  sunxi, broadcom, omap, and versatile.

  The conversion of binding files to machine-readable yaml format
  continues, along with fixes found during the validation. Andre
  Przywara takes over maintainership for the old Calxeda Highbank
  platform and provides a number of updates.

  The OMAP2+ platforms see a continued move from platform data into dts
  files, for many devices that relied on a mix of auxiliary data in
  addition to the DT description

  A moderate number of new SoCs and machines are added, here is a full
  list:

   - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
     (SM8250) is the current high-end phone chip, and IPQ6018 is a new
     WiFi-6 router chip.

   - Mediatek MT8516 application processor SoC for voice assistants,
     along with the "pumpkin" development board

   - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
     evaluation board.

   - Kontron "sl28" board family based on NXP LS1028A

   - Eleven variations of the new i.MX6 TechNexion Pico board, combining
     the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
     SoM carriers

   - Three additional variants of the Toradex Colibri board family, all
     based on versions of the NXP i.MX7.

   - The Pinebook Pro laptop based on Rockchip RK3399

   - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
     on the ST-Ericsson u8500 platform

   - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
     STMicroelectronics stm32mp157

   - Renesas M3ULCB starter kit for R-Car M3-W+

   - Hoperun HiHope development board with Renesas RZ/G2M

   - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
     A64

   - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
     A20

   - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"

* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
  ARM: dts: ux500: Fix missing node renames
  arm64: dts: Revert "specify console via command line"
  MAINTAINERS: Update Calxeda Highbank maintainership
  arm: dts: calxeda: Group port-phys and sgpio-gpio items
  arm: dts: calxeda: Fix interrupt grouping
  arm: dts: calxeda: Provide UART clock
  arm: dts: calxeda: Basic DT file fixes
  arm64: dts: specify console via command line
  ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
  ARM: dts: gemini: Add thermal zone to DIR-685
  ARM: dts: gemini: Rename IDE nodes
  ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
  arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
  arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
  arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
  arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
  arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
  arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
  arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
  arm64: dts: khadas-vim3: add SPIFC controller node
  ...

Pull ARM defconfig updates from Arnd Bergmann:
 "As usual, tons of new drivers and other options got merged and are now
  enabled in the defconfig files, usually as loadable modules"

* tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
  ARM: omap2plus_defconfig: Update for moved and dropped options
  ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module
  ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules
  ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
  ARM: omap2plus_defconfig: Enable zram as loadable modules
  ARM: omap2plus_defconfig: Enable simple-pm-bus
  arm64: defconfig: Enable Qualcomm SDM845 audio configs
  arm64: defconfig: Enable e1000 device
  arm64: defconfig: Enable PHY devices used on QorIQ boards
  arm64: defconfig: Enable RTC devices for QorIQ boards
  arm64: defconfig: Enable flash device drivers for QorIQ boards
  arm64: defconfig: Enable ARM Mali display driver
  arm64: defconfig: Enable QorIQ GPIO driver
  arm64: defconfig: Enable QorIQ IFC NAND controller driver
  arm64: defconfig: Enable ARM SBSA watchdog driver
  arm64: defconfig: Enable QorIQ cpufreq driver
  arm64: defconfig: Enable NXP/FSL SPI controller drivers
  arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
  arm64: defconfig: Enable QorIQ DPAA2 drivers
  arm64: defconfig: Enable QorIQ DPAA1 drivers
  ...

 - Add support for Unisoc SC9863A clks
 - GPU GX GDSC support on Qualcomm sc7180
 - Qualcomm SM8250 RPMh and MSM8976 RPM clks
 - Qualcomm SM8250 Global Clock Controller (GCC) support
 - Qualcomm SC7180 Modem Clock Controller (MSS CC) support

* clk-unisoc:
  clk: sprd: fix to get a correct ibias of pll
  clk: sprd: add clocks support for SC9863A
  clk: sprd: support to get regmap from parent node
  clk: sprd: Add macros for referencing parents without strings
  clk: sprd: Add dt-bindings include file for SC9863A
  dt-bindings: clk: sprd: add bindings for sc9863a clock controller
  dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific
  clk: sprd: add gate for pll clocks

* clk-tegra:
  clk: tegra: Use NULL for pointer initialization
  clk: tegra: Remove audio clocks configuration from clock driver
  clk: tegra: Remove tegra_pmc_clk_init along with clk ids
  clk: tegra: Remove CLK_M_DIV fixed clocks
  clk: tegra: Fix Tegra PMC clock out parents
  clk: tegra: Add Tegra OSC to clock lookup
  clk: tegra: Add support for OSC_DIV fixed clocks
  dt-bindings: soc: tegra-pmc: Add ID for Tegra PMC 32 kHz blink clock
  dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings
  dt-bindings: tegra: Convert Tegra PMC bindings to YAML
  dt-bindings: clock: tegra: Add IDs for OSC clocks

* clk-qcom: (21 commits)
  clk: qcom: rpmh: Drop unnecessary semicolons
  clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd()
  clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150
  ipq806x: gcc: Added the enable regs and mask for PRNG
  clk: qcom: Add modem clock controller driver for SC7180
  clk: qcom: gcc: Add support for modem clocks in GCC
  dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings
  clk: qcom: clk-rpm: add missing rpm clk for ipq806x
  clk: qcom: gcc: Add global clock controller driver for SM8250
  dt-bindings: clock: Add SM8250 GCC clock bindings
  clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs
  clk: qcom: clk-alpha-pll: Refactor trion PLL
  clk: qcom: clk-alpha-pll: Use common names for defines
  dt-bindings: clock: rpmcc: Document msm8976 compatible
  clk: qcom: smd: Add support for MSM8976 rpm clocks
  clk: qcom: clk-rpmh: Wait for completion when enabling clocks
  clk: qcom: rpmh: Add support for RPMH clocks on SM8250
  dt-bindings: clock: Add RPMHCC bindings for SM8250
  clk: qcom: alpha-pll: Make error prints more informative
  clk: qcom: gpucc: Add support for GX GDSC for SC7180
  ...

* clk-imx: (43 commits)
  dt-bindings: imx8mm-clock: Fix the file path
  dt-bindings: imx8mq-clock: Fix the file path
  clk: imx: clk-gate2: Pass the device to the register function
  clk: imx7d: Add PXP clock
  clk: imx8mq: A53 core clock no need to be critical
  clk: imx8mp: A53 core clock no need to be critical
  clk: imx8mm: A53 core clock no need to be critical
  clk: imx8mn: A53 core clock no need to be critical
  clk: imx: pllv4: use prepare/unprepare
  clk: imx: pfdv2: determine best parent rate
  clk: imx: pfdv2: switch to use determine_rate
  clk: imx: Fix division by zero warning on pfdv2
  clk: imx: clk-sscg-pll: Drop unnecessary initialization
  clk: imx: pll14xx: Return error if pll type is invalid
  clk: imx: imx8mp: fix a53 cpu clock
  clk: imx: imx8mn: fix a53 cpu clock
  clk: imx: imx8mm: fix a53 cpu clock
  clk: imx: imx8mq: fix a53 cpu clock
  clk: imx8mp: Rename the IMX8MP_CLK_HDMI_27M clock
  clk: imx8mn: Remove unused includes
  ...

Merge branches 'clk-ti', 'clk-ingenic', 'clk-typo', 'clk-at91', 'clk-mmp2' and 'clk-arm-icst' into clk-next

 - EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs
 - Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and at91sam9g45 SoCs
 - Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers

* clk-ti:
  clk: keystone: Add new driver to handle syscon based clocks
  dt-bindings: clock: Add binding documentation for TI EHRPWM TBCLK

* clk-ingenic:
  clk: ingenic/TCU: Fix round_rate returning error
  clk: ingenic/jz4770: Exit with error if CGU init failed
  clk: JZ4780: Add function for enable the second core.
  clk: Ingenic: Add support for TCU of X1000.

* clk-typo:
  clk: Fix trivia typo in comment exlusive => exclusive

* clk-at91:
  clk: at91: add at91rm9200 pmc driver
  clk: at91: add at91sam9n12 pmc driver
  clk: at91: add sama5d3 pmc driver
  clk: at91: add at91sam9g45 pmc driver
  clk: at91: usb: introduce num_parents in driver's structure
  clk: at91: usb: use proper usbs_mask
  clk: at91: sam9x60: fix usb clock parents
  clk: at91: usb: continue if clk_hw_round_rate() return zero
  clk: at91: sam9x60: Don't use audio PLL

* clk-mmp2:
  clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks
  clk: mmp2: Add clock for fifth SD HCI on MMP3
  dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3
  clk: mmp2: Add clocks for the thermal sensors
  dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors
  clk: mmp2: add the GPU clocks
  dt-bindings: marvell,mmp2: Add clock ids for the GPU clocks
  clk: mmp2: Add PLLs that are available on MMP3
  dt-bindings: marvell,mmp2: Add clock ids for MMP3 PLLs
  clk: mmp2: Check for MMP3
  dt-bindings: clock: Add MMP3 compatible string
  clk: mmp2: Stop pretending PLL outputs are constant
  clk: mmp2: Add support for PLL clock sources
  dt-bindings: clock: Convert marvell,mmp2-clock to json-schema
  clk: mmp2: Constify some strings
  clk: mmp2: Remove a unused prototype

* clk-arm-icst:
  MAINTAINERS: dt: update reference for arm-integrator.txt
  clk: versatile: Add device tree probing for IM-PD1 clocks
  clk: versatile: Export icst_clk_setup()
  dt-bindings: clock: Create YAML schema for ICST clocks

 - Don't show clk phase when it is invalid

* clk-phase-errors:
  clk: rockchip: fix mmc get phase
  clk: Fix phase init check
  clk: Bail out when calculating phase fails during clk registration
  clk: Move rate and accuracy recalc to mostly consumer APIs
  clk: Use 'parent' to shorten lines in __clk_core_init()
  clk: Don't cache errors from clk_ops::get_phase()

* clk-amlogic:
  clk: meson: meson8b: set audio output clock hierarchy
  clk: meson: g12a: add support for the SPICC SCLK Source clocks
  dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs
  clk: meson: gxbb: set audio output clock hierarchy
  clk: meson: gxbb: add the gxl internal dac gate
  dt-bindings: clk: meson: add the gxl internal dac gate

* clk-renesas:
  dt-bindings: clock: renesas: cpg-mssr: Convert to json-schema
  clk: renesas: rcar-usb2-clock-sel: Add reset_control
  clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management
  dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add power-domains and resets properties
  dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties
  clk: renesas: Remove use of ARCH_R8A7795
  clk: renesas: r8a77965: Add RPC clocks
  clk: renesas: r8a7796: Add RPC clocks
  clk: renesas: r8a7795: Add RPC clocks
  clk: renesas: rcar-gen3: Add CCREE clocks

* clk-allwinner:
  clk: sunxi-ng: sun8i-de2: Sort structures
  clk: sunxi-ng: sun8i-de2: Add R40 specific quirks
  clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A83T
  clk: sunxi-ng: sun8i-de2: Don't reuse A83T resets
  clk: sunxi-ng: sun8i-de2: H6 doesn't have rotate core
  clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A64
  clk: sunxi-ng: sun8i-de2: Split out H5 definitions
  clk: sunxi-ng: a64: Export MBUS clock

* clk-samsung:
  clk: samsung: Remove redundant check in samsung_cmu_register_one

* clk-formatting:
  clk: Fix continuation of of_clk_detect_critical()

* clk-si5341:
  clk, clk-si5341: Support multiple input ports

* clk-socfpga:
  clk: socfpga: stratix10: simplify parameter passing
  clk: stratix10: use do_div() for 64-bit calculation

Pull ARM driver updates from Arnd Bergmann:
 "These are the usual updates for SoC specific device drivers and
  related subsystems that don't have their own top-level maintainers:

   - ARM SCMI/SCPI updates to allow pluggable transport layers

   - TEE subsystem cleanups

   - A new driver for the Amlogic secure power domain controller

   - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
     and TI OMAP2+ sysc drivers.

   - Qualcomm SoC driver updates, including a new library module for
     "protection domain" notifications

   - Lots of smaller bugfixes and cleanups in other drivers"

* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
  soc: fsl: qe: fix sparse warnings for ucc_slow.c
  soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
  soc: fsl: qe: fix sparse warnings for ucc_fast.c
  soc: fsl: qe: fix sparse warnings for qe_ic.c
  soc: fsl: qe: fix sparse warnings for ucc.c
  soc: fsl: qe: fix sparse warning for qe_common.c
  soc: fsl: qe: fix sparse warnings for qe.c
  soc: qcom: Fix QCOM_APR dependencies
  soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
  soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
  firmware: imx: add COMPILE_TEST for IMX_SCU driver
  soc: imx: gpc: fix power up sequencing
  soc: imx: increase build coverage for imx8m soc driver
  soc: qcom: apr: Add avs/audio tracking functionality
  dt-bindings: soc: qcom: apr: Add protection domain bindings
  soc: qcom: Introduce Protection Domain Restart helpers
  devicetree: bindings: firmware: add ipq806x to qcom_scm
  memory: tegra: Correct debugfs clk rate-range on Tegra124
  memory: tegra: Correct debugfs clk rate-range on Tegra30
  memory: tegra: Correct debugfs clk rate-range on Tegra20
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "The code changes are mostly for 32-bit platforms and include:

   - Lots of updates for the Nvidia Tegra platform, including cpuidle,
     pmc, and dt-binding changes

   - Microchip at91 power management updates for the recently added
     sam9x60 SoC

   - Treewide setup_irq deprecation by afzal mohammed

   - STMicroelectronics stm32 gains earlycon support

   - Renesas platforms with Cortex-A9 can now use the global timer

   - Some TI OMAP2+ platforms gain cpuidle support

   - Various cleanups for the i.MX6 and Orion platforms, as well as
     Kconfig files across all platforms"

* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
  ARM: qcom: Add support for IPQ40xx
  ARM: mmp: replace setup_irq() by request_irq()
  ARM: cns3xxx: replace setup_irq() by request_irq()
  ARM: spear: replace setup_irq() by request_irq()
  ARM: ep93xx: Replace setup_irq() by request_irq()
  ARM: iop32x: replace setup_irq() by request_irq()
  arm: mach-dove: Mark dove_io_desc as __maybe_unused
  ARM: orion: replace setup_irq() by request_irq()
  ARM: debug: stm32: add UART early console support for STM32MP1
  ARM: debug: stm32: add UART early console support for STM32H7
  ARM: debug: stm32: add UART early console configuration for STM32F7
  ARM: debug: stm32: add UART early console configuration for STM32F4
  cpuidle: tegra: Disable CC6 state if LP2 unavailable
  cpuidle: tegra: Squash Tegra114 driver into the common driver
  cpuidle: tegra: Squash Tegra30 driver into the common driver
  cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
  ARM: tegra: cpuidle: Remove unnecessary memory barrier
  ARM: tegra: cpuidle: Make abort_flag atomic
  ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
  ARM: tegra: Make outer_disable() open-coded
  ...

Merge tag 'for-5.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix excessive bio splitting that caused performance regressions

 - Fix logic bug in DM integrity discard support's integrity tag testing

 - Fix DM integrity warning on ppc64le due to missing cast

* tag 'for-5.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm integrity: fix logic bug in integrity tag testing
  Revert "dm: always call blk_queue_split() in dm_process_bio()"
  dm integrity: fix ppc64le warning

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)

   - Add more 32 GT/s link speed decoding and improve the implementation
     (Yicong Yang)

  Resource management:

   - Add support for sizing programmable host bridge apertures and fix a
     related alpha Nautilus regression (Ivan Kokshaysky)

  Interrupts:

   - Add boot interrupt quirk mechanism for Xeon chipsets and document
     boot interrupts (Sean V Kelley)

  PCIe native device hotplug:

   - When possible, disable in-band presence detect and use PDS
     (Alexandru Gagniuc)

   - Add DMI table for devices that don't use in-band presence detection
     but don't advertise that correctly (Stuart Hayes)

   - Fix hang when powering slots up/down via sysfs (Lukas Wunner)

   - Fix an MSI interrupt race (Stuart Hayes)

  Virtualization:

   - Add ACS quirks for Zhaoxin devices (Raymond Pang)

  Error handling:

   - Add Error Disconnect Recover (EDR) support so firmware can report
     devices disconnected via DPC and we can try to recover (Kuppuswamy
     Sathyanarayanan)

  Peer-to-peer DMA:

   - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
     Maier)

  ASPM:

   - Reduce severity of common clock config message (Chris Packham)

   - Clear the correct bits when enabling L1 substates, so we don't go
     to the wrong state (Yicong Yang)

  Endpoint framework:

   - Replace EPF linkup ops with notifier call chain and improve locking
     (Kishon Vijay Abraham I)

   - Fix concurrent memory allocation in OB address region (Kishon Vijay
     Abraham I)

   - Move PF function number assignment to EPC core to support multiple
     function creation methods (Kishon Vijay Abraham I)

   - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)

   - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
     Offset (Kishon Vijay Abraham I)

   - Add support for testing DMA transfers (Kishon Vijay Abraham I)

   - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)

   - Add support for tests to clear IRQ (Kishon Vijay Abraham I)

   - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)

  Amlogic Meson PCIe controller driver:

   - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
     Pommarel)

   - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
     Pommarel)

  Cadence PCIe controller driver:

   - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
     Abraham I)

  Intel VMD host bridge driver:

   - Add two VMD Device IDs that require bus restriction mode (Sushma
     Kalakota)

  Mobiveil PCIe controller driver:

   - Refactor and modularize mobiveil driver (Hou Zhiqiang)

   - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)

  Microsoft Hyper-V host bridge driver:

   - Add support for Hyper-V PCI protocol version 1.3 and
     PCI_BUS_RELATIONS2 (Long Li)

   - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
     Feng)

   - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:

   - Use pci_parse_request_of_pci_ranges() (Rob Herring)

   - Add support for endpoint mode and related DT updates (Vidya Sagar)

   - Reduce -EPROBE_DEFER error message log level (Thierry Reding)

  Qualcomm PCIe controller driver:

   - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)

  Synopsys DesignWare PCIe controller driver:

   - Refactor core initialization code for endpoint mode (Vidya Sagar)

   - Fix endpoint MSI-X to use correct table address (Kishon Vijay
     Abraham I)

  TI DRA7xx PCIe controller driver:

   - Fix MSI IRQ handling (Vignesh Raghavendra)

  TI Keystone PCIe controller driver:

   - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)

  Miscellaneous:

   - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
     Feng)

   - Use ioremap(), not phys_to_virt(), for platform ROM to fix video
     ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"

* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
  misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
  PCI: tegra: Print -EPROBE_DEFER error message at debug level
  misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
  misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
  tools: PCI: Add 'e' to clear IRQ
  misc: pci_endpoint_test: Add ioctl to clear IRQ
  misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
  PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
  PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
  PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
  misc: pci_endpoint_test: Add support to get DMA option from userspace
  tools: PCI: Add 'd' command line option to support DMA
  misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
  PCI: endpoint: functions/pci-epf-test: Print throughput information
  PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
  PCI: pciehp: Fix MSI interrupt race
  PCI: pciehp: Fix indefinite wait on sysfs requests
  PCI: endpoint: Fix clearing start entry in configfs
  PCI: tegra: Add support for PCIe endpoint mode in Tegra194
  PCI: sysfs: Revert "rescan" file renames
  ...

Include originally "late" updates for OMAP and Qualcomm,
now that it's not late any more.

* arm/late: (122 commits)
  ARM: OMAP2+: Drop legacy platform data for ti81xx edma
  ARM: dts: Configure interconnect target module for ti816x edma
  ARM: dts: Configure interconnect target module for dm814x tptc3
  ARM: dts: Configure interconnect target module for dm814x tptc2
  ARM: dts: Configure interconnect target module for dm814x tptc1
  ARM: dts: Configure interconnect target module for dm814x tptc0
  ARM: dts: Configure interconnect target module for dm814x tpcc
  ARM: OMAP2+: Drop legacy platform data for dm814x cpsw
  ARM: dts: Configure interconnect target module for dm814x cpsw
  clk: ti: Fix dm814x clkctrl for ethernet
  arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware
  arm64: dts: sdm845: add IPA information
  arm64: dts: qcom: db845c: add analog audio support
  arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s
  arm64: dts: qcom: c630: Enable audio support
  arm64: dts: qcom: sdm845: add apr nodes
  arm64: dts: qcom: sdm845: add slimbus nodes
  arm64: dts: qcom: sc7180: Update reg names for SDHC
  arm64: dts: qcom: qcs404: Enable CQE support for eMMC
  arm64: dts: msm8916: Add fastrpc node
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc/other driver patches for 5.7-rc1.

  Lots of things in here, and it's later than expected due to some
  reverts to resolve some reported issues. All is now clean with no
  reported problems in linux-next.

  Included in here is:
   - interconnect updates
   - mei driver updates
   - uio updates
   - nvmem driver updates
   - soundwire updates
   - binderfs updates
   - coresight updates
   - habanalabs updates
   - mhi new bus type and core
   - extcon driver updates
   - some Kconfig cleanups
   - other small misc driver cleanups and updates

  As mentioned, all have been in linux-next for a while, and with the
  last two reverts, all is calm and good"

* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
  Revert "driver core: platform: Initialize dma_parms for platform devices"
  Revert "amba: Initialize dma_parms for amba devices"
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices
  bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
  bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
  bus: mhi: core: Add support for reading MHI info from device
  misc: rtsx: set correct pcr_ops for rts522A
  speakup: misc: Use dynamic minor numbers for speakup devices
  mei: me: add cedar fork device ids
  coresight: do not use the BIT() macro in the UAPI header
  Documentation: provide IBM contacts for embargoed hardware
  nvmem: core: remove nvmem_sysfs_get_groups()
  nvmem: core: use is_bin_visible for permissions
  nvmem: core: use device_register and device_unregister
  nvmem: core: add root_only member to nvmem device struct
  extcon: axp288: Add wakeup support
  extcon: Mark extcon_get_edev_name() function as exported symbol
  extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
  dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
  ...

Pull SPDX updates from Greg KH:
 "Here are three SPDX patches for 5.7-rc1.

  One fixes up the SPDX tag for a single driver, while the other two go
  through the tree and add SPDX tags for all of the .gitignore files as
  needed.

  Nothing too complex, but you will get a merge conflict with your
  current tree, that should be trivial to handle (one file modified by
  two things, one file deleted.)

  All three of these have been in linux-next for a while, with no
  reported issues other than the merge conflict"

* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  ASoC: MT6660: make spdxcheck.py happy
  .gitignore: add SPDX License Identifier
  .gitignore: remove too obvious comments

Pull xen updates from Juergen Gross:

 - a cleanup patch removing an unused function

 - a small fix for the xen pciback driver

 - a series for making the unwinder hyppay with the Xen PV guest idle
   task stacks

* tag 'for-linus-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: Make the secondary CPU idle tasks reliable
  x86/xen: Make the boot CPU idle task reliable
  xen-pciback: fix INTERRUPT_TYPE_* defines
  xen/xenbus: remove unused xenbus_map_ring()

Pull workqueue updates from Tejun Heo:
 "Nothing too interesting. Just two trivial patches"

* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Mark up unlocked access to wq->first_flusher
  workqueue: Make workqueue_init*() return void

Pull cgroup updates from Tejun Heo:

 - Christian extended clone3 so that processes can be spawned into
   cgroups directly.

   This is not only neat in terms of semantics but also avoids grabbing
   the global cgroup_threadgroup_rwsem for migration.

 - Daniel added !root xattr support to cgroupfs.

   Userland already uses xattrs on cgroupfs for bookkeeping. This will
   allow delegated cgroups to support such usages.

 - Prateek tried to make cpuset hotplug handling synchronous but that
   led to possible deadlock scenarios. Reverted.

 - Other minor changes including release_agent_path handling cleanup.

* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  docs: cgroup-v1: Document the cpuset_v2_mode mount option
  Revert "cpuset: Make cpuset hotplug synchronous"
  cgroupfs: Support user xattrs
  kernfs: Add option to enable user xattrs
  kernfs: Add removed_size out param for simple_xattr_set
  kernfs: kvmalloc xattr value instead of kmalloc
  cgroup: Restructure release_agent_path handling
  selftests/cgroup: add tests for cloning into cgroups
  clone3: allow spawning processes into cgroups
  cgroup: add cgroup_may_write() helper
  cgroup: refactor fork helpers
  cgroup: add cgroup_get_from_file() helper
  cgroup: unify attach permission checking
  cpuset: Make cpuset hotplug synchronous
  cgroup.c: Use built-in RCU list checking
  kselftest/cgroup: add cgroup destruction test
  cgroup: Clean up css_set task traversal

Pull kgdb updates from Daniel Thompson:
 "Pretty quiet this cycle. Just a couple of small fixes from myself both
  of which were reviewed by Doug Anderson to keep me honest (thanks)"

* tag 'kgdb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Censor attempts to set PROMPT without ENABLE_MEM_READ
  kdb: Eliminate strncpy() warnings by replacing with strscpy()

Pull ARM updates from Russell King:

 - replace setup_irq() with request_irq() for ebsa110, footbridge, rpc

 - fix clang assembly error in kexec code

 - remove .fixup section in boot stub

 - decompressor / EFI cache flushing updates

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8966/1: rpc: replace setup_irq() by request_irq()
  ARM: 8965/2: footbridge: replace setup_irq() by request_irq()
  ARM: 8964/1: ebsa110: replace setup_irq() by request_irq()
  ARM: 8962/1: kexec: drop invalid assembly argument
  ARM: decompressor: switch to by-VA cache maintenance for v7 cores
  ARM: decompressor: prepare cache_clean_flush for doing by-VA maintenance
  ARM: decompressor: factor out routine to obtain the inflated image size
  ARM: 8959/1: Remove unused .fixup section in boot stub
  ARM: allow unwinder to unwind recursive functions

When building arm allyesconfig:

drivers/remoteproc/omap_remoteproc.c:174:44: error: too many arguments
to function call, expected 2, have 3
        timer->timer_ops->set_load(timer->odt, 0, 0);
        ~~~~~~~~~~~~~~~~~~~~~~~~~~                ^
1 error generated.

This is due to commit 02e6d546 ("clocksource/drivers/timer-ti-dm:
Enable autoreload in set_pwm") in the clockevents tree interacting with
commit e28edc57 ("remoteproc/omap: Request a timer(s) for remoteproc
usage") from the rpmsg tree.

This should have been fixed during the merge of the remoteproc tree
since it happened after the clockevents tree merge; however, it does not
look like my email was noticed by either maintainer and I did not pay
attention when the pull was sent since I was on CC.

Fixes: c6570114 ("Merge tag 'rproc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc")
Link: https://lore.kernel.org/lkml/20200327185055.GA22438@ubuntu-m2-xlarge-x86/Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If all the bytes are equal to DISCARD_FILLER, we want to accept the
buffer. If any of the bytes are different, we must do thorough
tag-by-tag checking.

The condition was inverted.

Fixes: 84597a44 ("dm integrity: add optional discard support")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The cpuset in cgroup v1 accepts a special "cpuset_v2_mode" mount
option that make cpuset.cpus and cpuset.mems behave more like those in
cgroup v2.  Document it to make other people more aware of this feature
that can be useful in some circumstances.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

This reverts commit effd58c9.

blk_queue_split() is causing excessive IO splitting -- because
blk_max_size_offset() depends on 'chunk_sectors' limit being set and
if it isn't (as is the case for DM targets!) it falls back to
splitting on a 'max_sectors' boundary regardless of offset.

"Fix" this by reverting back to _not_ using blk_queue_split() in
dm_process_bio() for normal IO (reads and writes).  Long-term fix is
still TBD but it should focus on training blk_max_size_offset() to
call into a DM provided hook (to call DM's max_io_len()).

Test results from simple misaligned IO test on 4-way dm-striped device
with chunksize of 128K and stripesize of 512K:

xfs_io -d -c 'pread -b 2m 224s 4072s' /dev/mapper/stripe_dev

before this revert:

253,0   21        1     0.000000000  2206  Q   R 224 + 4072 [xfs_io]
253,0   21        2     0.000008267  2206  X   R 224 / 480 [xfs_io]
253,0   21        3     0.000010530  2206  X   R 224 / 256 [xfs_io]
253,0   21        4     0.000027022  2206  X   R 480 / 736 [xfs_io]
253,0   21        5     0.000028751  2206  X   R 480 / 512 [xfs_io]
253,0   21        6     0.000033323  2206  X   R 736 / 992 [xfs_io]
253,0   21        7     0.000035130  2206  X   R 736 / 768 [xfs_io]
253,0   21        8     0.000039146  2206  X   R 992 / 1248 [xfs_io]
253,0   21        9     0.000040734  2206  X   R 992 / 1024 [xfs_io]
253,0   21       10     0.000044694  2206  X   R 1248 / 1504 [xfs_io]
253,0   21       11     0.000046422  2206  X   R 1248 / 1280 [xfs_io]
253,0   21       12     0.000050376  2206  X   R 1504 / 1760 [xfs_io]
253,0   21       13     0.000051974  2206  X   R 1504 / 1536 [xfs_io]
253,0   21       14     0.000055881  2206  X   R 1760 / 2016 [xfs_io]
253,0   21       15     0.000057462  2206  X   R 1760 / 1792 [xfs_io]
253,0   21       16     0.000060999  2206  X   R 2016 / 2272 [xfs_io]
253,0   21       17     0.000062489  2206  X   R 2016 / 2048 [xfs_io]
253,0   21       18     0.000066133  2206  X   R 2272 / 2528 [xfs_io]
253,0   21       19     0.000067507  2206  X   R 2272 / 2304 [xfs_io]
253,0   21       20     0.000071136  2206  X   R 2528 / 2784 [xfs_io]
253,0   21       21     0.000072764  2206  X   R 2528 / 2560 [xfs_io]
253,0   21       22     0.000076185  2206  X   R 2784 / 3040 [xfs_io]
253,0   21       23     0.000077486  2206  X   R 2784 / 2816 [xfs_io]
253,0   21       24     0.000080885  2206  X   R 3040 / 3296 [xfs_io]
253,0   21       25     0.000082316  2206  X   R 3040 / 3072 [xfs_io]
253,0   21       26     0.000085788  2206  X   R 3296 / 3552 [xfs_io]
253,0   21       27     0.000087096  2206  X   R 3296 / 3328 [xfs_io]
253,0   21       28     0.000093469  2206  X   R 3552 / 3808 [xfs_io]
253,0   21       29     0.000095186  2206  X   R 3552 / 3584 [xfs_io]
253,0   21       30     0.000099228  2206  X   R 3808 / 4064 [xfs_io]
253,0   21       31     0.000101062  2206  X   R 3808 / 3840 [xfs_io]
253,0   21       32     0.000104956  2206  X   R 4064 / 4096 [xfs_io]
253,0   21       33     0.001138823     0  C   R 4096 + 200 [0]

after this revert:

253,0   18        1     0.000000000  4430  Q   R 224 + 3896 [xfs_io]
253,0   18        2     0.000018359  4430  X   R 224 / 256 [xfs_io]
253,0   18        3     0.000028898  4430  X   R 256 / 512 [xfs_io]
253,0   18        4     0.000033535  4430  X   R 512 / 768 [xfs_io]
253,0   18        5     0.000065684  4430  X   R 768 / 1024 [xfs_io]
253,0   18        6     0.000091695  4430  X   R 1024 / 1280 [xfs_io]
253,0   18        7     0.000098494  4430  X   R 1280 / 1536 [xfs_io]
253,0   18        8     0.000114069  4430  X   R 1536 / 1792 [xfs_io]
253,0   18        9     0.000129483  4430  X   R 1792 / 2048 [xfs_io]
253,0   18       10     0.000136759  4430  X   R 2048 / 2304 [xfs_io]
253,0   18       11     0.000152412  4430  X   R 2304 / 2560 [xfs_io]
253,0   18       12     0.000160758  4430  X   R 2560 / 2816 [xfs_io]
253,0   18       13     0.000183385  4430  X   R 2816 / 3072 [xfs_io]
253,0   18       14     0.000190797  4430  X   R 3072 / 3328 [xfs_io]
253,0   18       15     0.000197667  4430  X   R 3328 / 3584 [xfs_io]
253,0   18       16     0.000218751  4430  X   R 3584 / 3840 [xfs_io]
253,0   18       17     0.000226005  4430  X   R 3840 / 4096 [xfs_io]
253,0   18       18     0.000250404  4430  Q   R 4120 + 176 [xfs_io]
253,0   18       19     0.000847708     0  C   R 4096 + 24 [0]
253,0   18       20     0.000855783     0  C   R 4120 + 176 [0]

Fixes: effd58c9 ("dm: always call blk_queue_split() in dm_process_bio()")
Cc: stable@vger.kernel.org
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Tested-by: Barry Marson <bmarson@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>