- 26 Jan, 2019 38 commits
-
-
Adrian Hunter authored
[ Upstream commit 1c6f709b ] Users should never use 'pt=0', but if they do it may give a meaningless error: $ perf record -e intel_pt/pt=0/u uname Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u). Fix that by forcing 'pt=1'. Committer testing: # perf record -e intel_pt/pt=0/u uname Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u). /bin/dmesg | grep -i perf may provide additional information. # perf record -e intel_pt/pt=0/u uname pt=0 doesn't make sense, forcing pt=1 Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data ] # Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/b7c5b4e5-9497-10e5-fd43-5f3e4a0fe51d@intel.comSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Sergey Senozhatsky authored
[ Upstream commit d7240214 ] LKP has hit yet another circular locking dependency between uart console drivers and debugobjects [1]: CPU0 CPU1 rhltable_init() __init_work() debug_object_init uart_shutdown() /* db->lock */ /* uart_port->lock */ debug_print_object() free_page() printk() call_console_drivers() debug_check_no_obj_freed() /* uart_port->lock */ /* db->lock */ debug_print_object() So there are two dependency chains: uart_port->lock -> db->lock And db->lock -> uart_port->lock This particular circular locking dependency can be addressed in several ways: a) One way would be to move debug_print_object() out of db->lock scope and, thus, break the db->lock -> uart_port->lock chain. b) Another one would be to free() transmit buffer page out of db->lock in UART code; which is what this patch does. It makes sense to apply a) and b) independently: there are too many things going on behind free(), none of which depend on uart_port->lock. The patch fixes transmit buffer page free() in uart_shutdown() and, additionally, in uart_port_startup() (as was suggested by Dmitry Safonov). [1] https://lore.kernel.org/lkml/20181211091154.GL23332@shao2-debian/T/#uSigned-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Waiman Long <longman@redhat.com> Cc: Dmitry Safonov <dima@arista.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Johannes Thumshirn authored
[ Upstream commit 1690dd41 ] In the error handling block, err holds the return value of either btrfs_del_root_ref() or btrfs_del_inode_ref() but it hasn't been checked since it's introduction with commit fe66a05a (Btrfs: improve error handling for btrfs_insert_dir_item callers) in 2012. If the error handling in the error handling fails, there's not much left to do and the abort either happened earlier in the callees or is necessary here. So if one of btrfs_del_root_ref() or btrfs_del_inode_ref() failed, abort the transaction, but still return the original code of the failure stored in 'ret' as this will be reported to the user. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Jonas Danielsson authored
[ Upstream commit ae460c11 ] On our AT91SAM9260 board we use the same sdio bus for wifi and for the sd card slot. This caused the atmel-mci to give the following splat on the serial console: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 538 at drivers/mmc/host/atmel-mci.c:859 atmci_send_command+0x24/0x44 Modules linked in: CPU: 0 PID: 538 Comm: mmcqd/0 Not tainted 4.14.76 #14 Hardware name: Atmel AT91SAM9 [<c000fccc>] (unwind_backtrace) from [<c000d3dc>] (show_stack+0x10/0x14) [<c000d3dc>] (show_stack) from [<c0017644>] (__warn+0xd8/0xf4) [<c0017644>] (__warn) from [<c0017704>] (warn_slowpath_null+0x1c/0x24) [<c0017704>] (warn_slowpath_null) from [<c033bb9c>] (atmci_send_command+0x24/0x44) [<c033bb9c>] (atmci_send_command) from [<c033e984>] (atmci_start_request+0x1f4/0x2dc) [<c033e984>] (atmci_start_request) from [<c033f3b4>] (atmci_request+0xf0/0x164) [<c033f3b4>] (atmci_request) from [<c0327108>] (mmc_start_request+0x280/0x2d0) [<c0327108>] (mmc_start_request) from [<c032800c>] (mmc_start_areq+0x230/0x330) [<c032800c>] (mmc_start_areq) from [<c03366f8>] (mmc_blk_issue_rw_rq+0xc4/0x310) [<c03366f8>] (mmc_blk_issue_rw_rq) from [<c03372c4>] (mmc_blk_issue_rq+0x118/0x5ac) [<c03372c4>] (mmc_blk_issue_rq) from [<c033781c>] (mmc_queue_thread+0xc4/0x118) [<c033781c>] (mmc_queue_thread) from [<c002daf8>] (kthread+0x100/0x118) [<c002daf8>] (kthread) from [<c000a580>] (ret_from_fork+0x14/0x34) ---[ end trace 594371ddfa284bd6 ]--- This is: WARN_ON(host->cmd); This was fixed on our board by letting atmci_request_end determine what state we are in. Instead of unconditionally setting it to STATE_IDLE on STATE_END_REQUEST. Signed-off-by:
Jonas Danielsson <jonas@orbital-systems.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit fbac5977 ] An unterminated string literal followed by new line is passed to the parser (with "multi-line strings not supported" warning shown), then handled properly there. On the other hand, an unterminated string literal at end of file is never passed to the parser, then results in memory leak. [Test Code] ----------(Kconfig begin)---------- source "Kconfig.inc" config A bool "a" -----------(Kconfig end)----------- --------(Kconfig.inc begin)-------- config B bool "b\No new line at end of file ---------(Kconfig.inc end)--------- [Summary from Valgrind] Before the fix: LEAK SUMMARY: definitely lost: 16 bytes in 1 blocks ... After the fix: LEAK SUMMARY: definitely lost: 0 bytes in 0 blocks ... Eliminate the memory leak path by handling this case. Of course, such a Kconfig file is wrong already, so I will add an error message later. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 77c1c0fa ] Currently, warn_ignore_character() displays invalid file name and line number. The lexer should use current_file->name and yylineno, while the parser should use zconf_curname() and zconf_lineno(). This difference comes from that the lexer is always going ahead of the parser. The parser needs to look ahead one token to make a shift/reduce decision, so the lexer is requested to scan more text from the input file. This commit fixes the warning message from warn_ignored_character(). [Test Code] ----(Kconfig begin)---- / -----(Kconfig end)----- [Output] Before the fix: <none>:0:warning: ignoring unsupported character '/' After the fix: Kconfig:1:warning: ignoring unsupported character '/' Signed-off-by:
-
Will Deacon authored
[ Upstream commit 33309ecd ] The dcache_by_line_op macro suffers from a couple of small problems: First, the GAS directives that are currently being used rely on assembler behavior that is not documented, and probably not guaranteed to produce the correct behavior going forward. As a result, we end up with some undefined symbols in cache.o: $ nm arch/arm64/mm/cache.o ... U civac ... U cvac U cvap U cvau This is due to the fact that the comparisons used to select the operation type in the dcache_by_line_op macro are comparing symbols not strings, and even though it seems that GAS is doing the right thing here (undefined symbols by the same name are equal to each other), it seems unwise to rely on this. Second, when patching in a DC CVAP instruction on CPUs that support it, the fallback path consists of a DC CVAU instruction which may be affected by CPU errata that require ARM64_WORKAROUND_CLEAN_CACHE. Solve these issues by unrolling the various maintenance routines and using the conditional directives that are documented as operating on strings. To avoid the complexity of nested alternatives, we move the DC CVAP patching to __clean_dcache_area_pop, falling back to a branch to __clean_dcache_area_poc if DCPOP is not supported by the CPU. Reported-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Suggested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Lucas Stach authored
[ Upstream commit f7542d81 ] The exclusive gates may be set up in the wrong way by software running before the clock driver comes up. In that case the exclusive setup is locked in its initial state, as the complementary function can't be activated without disabling the initial setup first. To avoid this lock situation, reset the exclusive gates to the off state and allow the kernel to provide the proper setup. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Dong Aisheng <Aisheng.dong@nxp.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit b708a3cc ] I've stumbled over the current macro-expand behaviour of the test harness: $ gcc -Wall -xc - <<'__EOF__' TEST(macro) { int status = 0; ASSERT_TRUE(WIFSIGNALED(status)); } TEST_HARNESS_MAIN __EOF__ $ ./a.out [==========] Running 1 tests from 1 test cases. [ RUN ] global.macro <stdin>:4:global.macro:Expected 0 (0) != (((signed char) (((status) & 0x7f) + 1) >> 1) > 0) (0) global.macro: Test terminated by assertion [ FAIL ] global.macro [==========] 0 / 1 tests passed. [ FAILED ] With this change the output of the same test looks much more comprehensible: [==========] Running 1 tests from 1 test cases. [ RUN ] global.macro <stdin>:4:global.macro:Expected 0 (0) != WIFSIGNALED(status) (0) global.macro: Test terminated by assertion [ FAIL ] global.macro [==========] 0 / 1 tests passed. [ FAILED ] The issue is very similar to the bug fixed in glibc assert(3) three years ago: https://sourceware.org/bugzilla/show_bug.cgi?id=18604 Cc: Shuah Khan <shuah@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Shuah Khan <shuah@kernel.org> Signed-off-by:
-
David Disseldorp authored
[ Upstream commit 0de26357 ] spc5r17.pdf specifies: 4.3.1 ASCII data field requirements ASCII data fields shall contain only ASCII printable characters (i.e., code values 20h to 7Eh) and may be terminated with one or more ASCII null (00h) characters. ASCII data fields described as being left-aligned shall have any unused bytes at the end of the field (i.e., highest offset) and the unused bytes shall be filled with ASCII space characters (20h). LIO currently space-pads the T10 VENDOR IDENTIFICATION and PRODUCT IDENTIFICATION fields in the standard INQUIRY data. However, the PRODUCT REVISION LEVEL field in the standard INQUIRY data as well as the T10 VENDOR IDENTIFICATION field in the INQUIRY Device Identification VPD Page are zero-terminated/zero-padded. Fix this inconsistency by using space-padding for all of the above fields. Signed-off-by:
David Disseldorp <ddiss@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Bryant G. Ly <bly@catalogicsoftware.com> Reviewed-by:
Lee Duncan <lduncan@suse.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
yupeng authored
[ Upstream commit 0fbe82e6 ] after set SO_DONTROUTE to 1, the IP layer should not route packets if the dest IP address is not in link scope. But if the socket has cached the dst_entry, such packets would be routed until the sk_dst_cache expires. So we should clean the sk_dst_cache when a user set SO_DONTROUTE option. Below are server/client python scripts which could reprodue this issue: server side code: ========================================================================== import socket import struct import time s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.bind(('0.0.0.0', 9000)) s.listen(1) sock, addr = s.accept() sock.setsockopt(socket.SOL_SOCKET, socket.SO_DONTROUTE, struct.pack('i', 1)) while True: sock.send(b'foo') time.sleep(1) ========================================================================== client side code: ========================================================================== import socket import time s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.connect(('server_address', 9000)) while True: data = s.recv(1024) print(data) ========================================================================== Signed-off-by:
yupeng <yupeng0921@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vivek Gautam authored
[ Upstream commit de2563bc ] Turning on CONFIG_DMA_API_DEBUG_SG results in the following error: [ 460.308650] ------------[ cut here ]------------ [ 460.313490] qcom-venus aa00000.video-codec: DMA-API: mapping sg segment longer than device claims to support [len=4194304] [max=65536] [ 460.326017] WARNING: CPU: 3 PID: 3555 at src/kernel/dma/debug.c:1301 debug_dma_map_sg+0x174/0x254 [ 460.338888] Modules linked in: venus_dec venus_enc videobuf2_dma_sg videobuf2_memops hci_uart btqca bluetooth venus_core v4l2_mem2mem videobuf2_v4l2 videobuf2_common ath10k_snoc ath10k_core ath lzo lzo_compress zramjoydev [ 460.375811] CPU: 3 PID: 3555 Comm: V4L2DecoderThre Tainted: G W 4.19.1 #82 [ 460.384223] Hardware name: Google Cheza (rev1) (DT) [ 460.389251] pstate: 60400009 (nZCv daif +PAN -UAO) [ 460.394191] pc : debug_dma_map_sg+0x174/0x254 [ 460.398680] lr : debug_dma_map_sg+0x174/0x254 [ 460.403162] sp : ffffff80200c37d0 [ 460.406583] x29: ffffff80200c3830 x28: 0000000000010000 [ 460.412056] x27: 00000000ffffffff x26: ffffffc0f785ea80 [ 460.417532] x25: 0000000000000000 x24: ffffffc0f4ea1290 [ 460.423001] x23: ffffffc09e700300 x22: ffffffc0f4ea1290 [ 460.428470] x21: ffffff8009037000 x20: 0000000000000001 [ 460.433936] x19: ffffff80091b0000 x18: 0000000000000000 [ 460.439411] x17: 0000000000000000 x16: 000000000000f251 [ 460.444885] x15: 0000000000000006 x14: 0720072007200720 [ 460.450354] x13: ffffff800af536e0 x12: 0000000000000000 [ 460.455822] x11: 0000000000000000 x10: 0000000000000000 [ 460.461288] x9 : 537944d9c6c48d00 x8 : 537944d9c6c48d00 [ 460.466758] x7 : 0000000000000000 x6 : ffffffc0f8d98f80 [ 460.472230] x5 : 0000000000000000 x4 : 0000000000000000 [ 460.477703] x3 : 000000000000008a x2 : ffffffc0fdb13948 [ 460.483170] x1 : ffffffc0fdb0b0b0 x0 : 000000000000007a [ 460.488640] Call trace: [ 460.491165] debug_dma_map_sg+0x174/0x254 [ 460.495307] vb2_dma_sg_alloc+0x260/0x2dc [videobuf2_dma_sg] [ 460.501150] __vb2_queue_alloc+0x164/0x374 [videobuf2_common] [ 460.507076] vb2_core_reqbufs+0xfc/0x23c [videobuf2_common] [ 460.512815] vb2_reqbufs+0x44/0x5c [videobuf2_v4l2] [ 460.517853] v4l2_m2m_reqbufs+0x44/0x78 [v4l2_mem2mem] [ 460.523144] v4l2_m2m_ioctl_reqbufs+0x1c/0x28 [v4l2_mem2mem] [ 460.528976] v4l_reqbufs+0x30/0x40 [ 460.532480] __video_do_ioctl+0x36c/0x454 [ 460.536610] video_usercopy+0x25c/0x51c [ 460.540572] video_ioctl2+0x38/0x48 [ 460.544176] v4l2_ioctl+0x60/0x74 [ 460.547602] do_video_ioctl+0x948/0x3520 [ 460.551648] v4l2_compat_ioctl32+0x60/0x98 [ 460.555872] __arm64_compat_sys_ioctl+0x134/0x20c [ 460.560718] el0_svc_common+0x9c/0xe4 [ 460.564498] el0_svc_compat_handler+0x2c/0x38 [ 460.568982] el0_svc_compat+0x8/0x18 [ 460.572672] ---[ end trace ce209b87b2f3af88 ]--- >From above warning one would deduce that the sg segment will overflow the device's capacity. In reality, the hardware can accommodate larger sg segments. So, initialize the max segment size properly to weed out this warning. Based on a similar patch sent by Sean Paul for mdss: https://patchwork.kernel.org/patch/10671457/Signed-off-by:
Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit b2e9a4ed ] Clang warns: drivers/media/firewire/firedtv-avc.c:999:45: warning: implicit conversion from 'int' to 'char' changes value from 159 to -97 [-Wconstant-conversion] app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ drivers/media/firewire/firedtv-avc.c:1000:45: warning: implicit conversion from 'int' to 'char' changes value from 128 to -128 [-Wconstant-conversion] app_info[1] = (EN50221_TAG_APP_INFO >> 8) & 0xff; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ drivers/media/firewire/firedtv-avc.c:1040:44: warning: implicit conversion from 'int' to 'char' changes value from 159 to -97 [-Wconstant-conversion] app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ drivers/media/firewire/firedtv-avc.c:1041:44: warning: implicit conversion from 'int' to 'char' changes value from 128 to -128 [-Wconstant-conversion] app_info[1] = (EN50221_TAG_CA_INFO >> 8) & 0xff; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ 4 warnings generated. Change app_info's type to unsigned char to match the type of the member msg in struct ca_msg, which is the only thing passed into the app_info parameter in this function. Link: https://github.com/ClangBuiltLinux/linux/issues/105Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Breno Leitao authored
[ Upstream commit 2b038cbc ] When booting a pseries kernel with PREEMPT enabled, it dumps the following warning: BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is pseries_processor_idle_init+0x5c/0x22c CPU: 13 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc3-00090-g12201a0128bc-dirty #828 Call Trace: [c000000429437ab0] [c0000000009c8878] dump_stack+0xec/0x164 (unreliable) [c000000429437b00] [c0000000005f2f24] check_preemption_disabled+0x154/0x160 [c000000429437b90] [c000000000cab8e8] pseries_processor_idle_init+0x5c/0x22c [c000000429437c10] [c000000000010ed4] do_one_initcall+0x64/0x300 [c000000429437ce0] [c000000000c54500] kernel_init_freeable+0x3f0/0x500 [c000000429437db0] [c0000000000112dc] kernel_init+0x2c/0x160 [c000000429437e20] [c00000000000c1d0] ret_from_kernel_thread+0x5c/0x6c This happens because the code calls get_lppaca() which calls get_paca() and it checks if preemption is disabled through check_preemption_disabled(). Preemption should be disabled because the per CPU variable may make no sense if there is a preemption (and a CPU switch) after it reads the per CPU data and when it is used. In this device driver specifically, it is not a problem, because this code just needs to have access to one lppaca struct, and it does not matter if it is the current per CPU lppaca struct or not (i.e. when there is a preemption and a CPU migration). That said, the most appropriate fix seems to be related to avoiding the debug_smp_processor_id() call at get_paca(), instead of calling preempt_disable() before get_paca(). Signed-off-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Breno Leitao authored
[ Upstream commit 8d4a8622 ] Currently xmon needs to get devtree_lock (through rtas_token()) during its invocation (at crash time). If there is a crash while devtree_lock is being held, then xmon tries to get the lock but spins forever and never get into the interactive debugger, as in the following case: int *ptr = NULL; raw_spin_lock_irqsave(&devtree_lock, flags); *ptr = 0xdeadbeef; This patch avoids calling rtas_token(), thus trying to get the same lock, at crash time. This new mechanism proposes getting the token at initialization time (xmon_init()) and just consuming it at crash time. This would allow xmon to be possible invoked independent of devtree_lock being held or not. Signed-off-by:
Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by:
-
Joel Fernandes (Google) authored
[ Upstream commit 30696378 ] The ramoops backend currently calls persistent_ram_save_old() even if a buffer is empty. While this appears to work, it is does not seem like the right thing to do and could lead to future bugs so lets avoid that. It also prevents misleading prints in the logs which claim the buffer is valid. I got something like: found existing buffer, size 0, start 0 When I was expecting: no valid data in buffer (sig = ...) This bails out early (and reports with pr_debug()), since it's an acceptable state. Signed-off-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Co-developed-by:
-
A.s. Dong authored
[ Upstream commit 9e5ef7a5 ] As the commit 2893c379 ("clk: make strings in parent name arrays const"), let's make the parent strings const, otherwise we may meet the following warning when compiling: drivers/clk/imx/clk-imx7ulp.c: In function 'imx7ulp_clocks_init': drivers/clk/imx/clk-imx7ulp.c:73:35: warning: passing argument 5 of 'imx_clk_mux_flags' discards 'const' qualifier from pointer target type clks[IMX7ULP_CLK_APLL_PRE_SEL] = imx_clk_mux_flags("apll_pre_sel", base + 0x508, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE); ^ In file included from drivers/clk/imx/clk-imx7ulp.c:23:0: drivers/clk/imx/clk.h:200:27: note: expected 'const char **' but argument is of type 'const char * const*' ... Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Daniel Santos authored
[ Upstream commit a788c527 ] jffs2_sync_fs makes the assumption that if CONFIG_JFFS2_FS_WRITEBUFFER is defined then a write buffer is available and has been initialized. However, this does is not the case when the mtd device has no out-of-band buffer: int jffs2_nand_flash_setup(struct jffs2_sb_info *c) { if (!c->mtd->oobsize) return 0; ... The resulting call to cancel_delayed_work_sync passing a uninitialized (but zeroed) delayed_work struct forces lockdep to become disabled. [ 90.050639] overlayfs: upper fs does not support tmpfile. [ 90.652264] INFO: trying to register non-static key. [ 90.662171] the code is fine but needs lockdep annotation. [ 90.673090] turning off the locking correctness validator. [ 90.684021] CPU: 0 PID: 1762 Comm: mount_root Not tainted 4.14.63 #0 [ 90.696672] Stack : 00000000 00000000 80d8f6a2 00000038 805f0000 80444600 8fe364f4 805dfbe7 [ 90.713349] 80563a30 000006e2 8068370c 00000001 00000000 00000001 8e2fdc48 ffffffff [ 90.730020] 00000000 00000000 80d90000 00000000 00000106 00000000 6465746e 312e3420 [ 90.746690] 6b636f6c 03bf0000 f8000000 20676e69 00000000 80000000 00000000 8e2c2a90 [ 90.763362] 80d90000 00000001 00000000 8e2c2a90 00000003 80260dc0 08052098 80680000 [ 90.780033] ... [ 90.784902] Call Trace: [ 90.789793] [<8000f0d8>] show_stack+0xb8/0x148 [ 90.798659] [<8005a000>] register_lock_class+0x270/0x55c [ 90.809247] [<8005cb64>] __lock_acquire+0x13c/0xf7c [ 90.818964] [<8005e314>] lock_acquire+0x194/0x1dc [ 90.828345] [<8003f27c>] flush_work+0x200/0x24c [ 90.837374] [<80041dfc>] __cancel_work_timer+0x158/0x210 [ 90.847958] [<801a8770>] jffs2_sync_fs+0x20/0x54 [ 90.857173] [<80125cf4>] iterate_supers+0xf4/0x120 [ 90.866729] [<80158fc4>] sys_sync+0x44/0x9c [ 90.875067] [<80014424>] syscall_common+0x34/0x58 Signed-off-by:
Daniel Santos <daniel.santos@pobox.com> Reviewed-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Chuck Lever authored
[ Upstream commit b024dd0e ] FRWR memory registration is done with a series of calls and WRs. 1. ULP invokes ib_dma_map_sg() 2. ULP invokes ib_map_mr_sg() 3. ULP posts an IB_WR_REG_MR on the Send queue Step 2 generates an iova. It is permissible for ULPs to change this iova (with certain restrictions) between steps 2 and 3. rxe_map_mr_sg captures the MR's iova but later when rxe processes the REG_MR WR, it ignores the MR's iova field. If a ULP alters the MR's iova after step 2 but before step 3, rxe never captures that change. When the remote sends an RDMA Read targeting that MR, rxe looks up the R_key, but the altered iova does not match the iova stored in the MR, causing the RDMA Read request to fail. Reported-by:
Anna Schumaker <schumaker.anna@gmail.com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Ondrej Mosnacek authored
[ Upstream commit 2cbdcb88 ] If a superblock has the MS_SUBMOUNT flag set, we should always allow mounting it. These mounts are done automatically by the kernel either as part of mounting some parent mount (e.g. debugfs always mounts tracefs under "tracing" for compatibility) or they are mounted automatically as needed on subdirectory accesses (e.g. NFS crossmnt mounts). Since such automounts are either an implicit consequence of the parent mount (which is already checked) or they can happen during regular accesses (where it doesn't make sense to check against the current task's context), the mount permission check should be skipped for them. Without this patch, attempts to access contents of an automounted directory can cause unexpected SELinux denials. In the current kernel tree, the MS_SUBMOUNT flag is set only via vfs_submount(), which is called only from the following places: - AFS, when automounting special "symlinks" referencing other cells - CIFS, when automounting "referrals" - NFS, when automounting subtrees - debugfs, when automounting tracefs In all cases the submounts are meant to be transparent to the user and it makes sense that if mounting the master is allowed, then so should be the automounts. Note that CAP_SYS_ADMIN capability checking is already skipped for (SB_KERNMOUNT|SB_SUBMOUNT) in: - sget_userns() in fs/super.c: if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) && !(type->fs_flags & FS_USERNS_MOUNT) && !capable(CAP_SYS_ADMIN)) return ERR_PTR(-EPERM); - sget() in fs/super.c: /* Ensure the requestor has permissions over the target filesystem */ if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) && !ns_capable(user_ns, CAP_SYS_ADMIN)) return ERR_PTR(-EPERM); Verified internally on patched RHEL 7.6 with a reproducer using NFS+httpd and selinux-tesuite. Fixes: 93faccbb ("fs: Better permission checking for submounts") Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit ceb94bc5 ] This patch adds a safety connection way for "forced_b_device" with "workaround_for_vbus" like below: < Example for R-Car E3 Ebisu > # modprobe <any usb gadget driver> # echo 1 > /sys/kernel/debug/ee020000.usb/b_device (connect a usb cable to host side.) # echo 2 > /sys/kernel/debug/ee020000.usb/b_device Previous code should have connected a usb cable before the "b_device" is set to 1 on the Ebisu board. However, if xHCI driver on the board is probed, it causes some troubles: - Conflicts USB VBUS/signals between the board and another host. - "Cannot enable. Maybe the USB cable is bad?" might happen on both the board and another host with a usb hub. - Cannot enumerate a usb gadget correctly because an interruption of VBUS change happens unexpectedly. Reported-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Anders Roxell authored
[ Upstream commit 81e9fa8b ] The armv8_pmuv3 driver doesn't have a remove function, and when the test 'CONFIG_DEBUG_TEST_DRIVER_REMOVE=y' is enabled, the following Call trace can be seen. [ 1.424287] Failed to register pmu: armv8_pmuv3, reason -17 [ 1.424870] WARNING: CPU: 0 PID: 1 at ../kernel/events/core.c:11771 perf_event_sysfs_init+0x98/0xdc [ 1.425220] Modules linked in: [ 1.425531] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.19.0-rc7-next-20181012-00003-ge7a97b1ad77b-dirty #35 [ 1.425951] Hardware name: linux,dummy-virt (DT) [ 1.426212] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 1.426458] pc : perf_event_sysfs_init+0x98/0xdc [ 1.426720] lr : perf_event_sysfs_init+0x98/0xdc [ 1.426908] sp : ffff00000804bd50 [ 1.427077] x29: ffff00000804bd50 x28: ffff00000934e078 [ 1.427429] x27: ffff000009546000 x26: 0000000000000007 [ 1.427757] x25: ffff000009280710 x24: 00000000ffffffef [ 1.428086] x23: ffff000009408000 x22: 0000000000000000 [ 1.428415] x21: ffff000009136008 x20: ffff000009408730 [ 1.428744] x19: ffff80007b20b400 x18: 000000000000000a [ 1.429075] x17: 0000000000000000 x16: 0000000000000000 [ 1.429418] x15: 0000000000000400 x14: 2e79726f74636572 [ 1.429748] x13: 696420656d617320 x12: 656874206e692065 [ 1.430060] x11: 6d616e20656d6173 x10: 2065687420687469 [ 1.430335] x9 : ffff00000804bd50 x8 : 206e6f7361657220 [ 1.430610] x7 : 2c3376756d705f38 x6 : ffff00000954d7ce [ 1.430880] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.431226] x3 : 0000000000000000 x2 : ffffffffffffffff [ 1.431554] x1 : 4d151327adc50b00 x0 : 0000000000000000 [ 1.431868] Call trace: [ 1.432102] perf_event_sysfs_init+0x98/0xdc [ 1.432382] do_one_initcall+0x6c/0x1a8 [ 1.432637] kernel_init_freeable+0x1bc/0x280 [ 1.432905] kernel_init+0x18/0x160 [ 1.433115] ret_from_fork+0x10/0x18 [ 1.433297] ---[ end trace 27fd415390eb9883 ]--- Rework to set suppress_bind_attrs flag to avoid removing the device when CONFIG_DEBUG_TEST_DRIVER_REMOVE=y, since there's no real reason to remove the armv8_pmuv3 driver. Cc: Arnd Bergmann <arnd@arndb.de> Co-developed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
Maciej W. Rozycki authored
[ Upstream commit e4849aff ] The Broadcom SiByte BCM1250, BCM1125, and BCM1125H SOCs have an onchip DRAM controller that supports memory amounts of up to 16GiB, and due to how the address decoder has been wired in the SOC any memory beyond 1GiB is actually mapped starting from 4GiB physical up, that is beyond the 32-bit addressable limit[1]. Consequently if the maximum amount of memory has been installed, then it will span up to 19GiB. Many of the evaluation boards we support that are based on one of these SOCs have their memory soldered and the amount present fits in the 32-bit address range. The BCM91250A SWARM board however has actual DIMM slots and accepts, depending on the peripherals revision of the SOC, up to 4GiB or 8GiB of memory in commercially available JEDEC modules[2]. I believe this is also the case with the BCM91250C2 LittleSur board. This means that up to either 3GiB or 7GiB of memory requires 64-bit addressing to access. I believe the BCM91480B BigSur board, which has the BCM1480 SOC instead, accepts at least as much memory, although I have no documentation or actual hardware available to verify that. Both systems have PCI slots installed for use by any PCI option boards, including ones that only support 32-bit addressing (additionally the 32-bit PCI host bridge of the BCM1250, BCM1125, and BCM1125H SOCs limits addressing to 32-bits), and there is no IOMMU available. Therefore for PCI DMA to work in the presence of memory beyond enable swiotlb for the affected systems. All the other SOC onchip DMA devices use 40-bit addressing and therefore can address the whole memory, so only enable swiotlb if PCI support and support for DMA beyond 4GiB have been both enabled in the configuration of the kernel. This shows up as follows: Broadcom SiByte BCM1250 B2 @ 800 MHz (SB1 rev 2) Board type: SiByte BCM91250A (SWARM) Determined physical RAM map: memory: 000000000fe7fe00 @ 0000000000000000 (usable) memory: 000000001ffffe00 @ 0000000080000000 (usable) memory: 000000000ffffe00 @ 00000000c0000000 (usable) memory: 0000000087fffe00 @ 0000000100000000 (usable) software IO TLB: mapped [mem 0xcbffc000-0xcfffc000] (64MB) in the bootstrap log and removes failures like these: defxx 0000:02:00.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0 fddi0: Receive buffer allocation failed fddi0: Adapter open failed! IP-Config: Failed to open fddi0 defxx 0000:09:08.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0 fddi1: Receive buffer allocation failed fddi1: Adapter open failed! IP-Config: Failed to open fddi1 when memory beyond 4GiB is handed out to devices that can only do 32-bit addressing. This updates commit cce335ae ("[MIPS] 64-bit Sibyte kernels need DMA32."). References: [1] "BCM1250/BCM1125/BCM1125H User Manual", Revision 1250_1125-UM100-R, Broadcom Corporation, 21 Oct 2002, Section 3: "System Overview", "Memory Map", pp. 34-38 [2] "BCM91250A User Manual", Revision 91250A-UM100-R, Broadcom Corporation, 18 May 2004, Section 3: "Physical Description", "Supported DRAM", p. 23 Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> [paul.burton@mips.com: Remove GPL text from dma.c; SPDX tag covers it] Signed-off-by:
Paul Burton <paul.burton@mips.com> Reviewed-by:
-
Borislav Petkov authored
[ Upstream commit 68b5e432 ] Add the proper includes and make smca_get_name() static. Fix an actual bug too which the warning triggered: arch/x86/kernel/cpu/mcheck/therm_throt.c:395:39: error: conflicting \ types for ‘smp_thermal_interrupt’ asmlinkage __visible void __irq_entry smp_thermal_interrupt(struct pt_regs *r) ^~~~~~~~~~~~~~~~~~~~~ In file included from arch/x86/kernel/cpu/mcheck/therm_throt.c:29: ./arch/x86/include/asm/traps.h:107:17: note: previous declaration of \ ‘smp_thermal_interrupt’ was here asmlinkage void smp_thermal_interrupt(void); Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Yi Wang <wang.yi59@zte.com.cn> Cc: Michael Matz <matz@suse.de> Cc: x86@kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1811081633160.1549@nanos.tec.linutronix.deSigned-off-by:
-
Takashi Sakamoto authored
[ Upstream commit fba43f45 ] This commit adds support for APOGEE duet FireWire, launched 2007, already discontinued. This model uses Oxford Semiconductor FW971 as its communication engine. Below is information on Configuration ROM of this unit. The unit supports some AV/C commands defined by Audio subunit specification and vendor dependent commands. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': False, 'chip_ID': 42949742248, 'cmc': False, 'cyc_clk_acc': 255, 'generation': 0, 'imc': False, 'isc': True, 'link_spd': 3, 'max_ROM': 0, 'max_rec': 64, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 122333], ['DESCRIPTOR', 'Duet'], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 122333], ['DESCRIPTOR', 'Duet']]]]} Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Anders Roxell authored
[ Upstream commit 64609794 ] When the test 'CONFIG_DEBUG_TEST_DRIVER_REMOVE=y' is enabled, arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init). devtmpfs gets killed because we try to remove a file and decrement the wb reference count before the noop_backing_device_info gets initialized. [ 0.332075] Serial: AMBA PL011 UART driver [ 0.485276] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 39, base_baud = 0) is a PL011 rev1 [ 0.502382] console [ttyAMA0] enabled [ 0.515710] Unable to handle kernel paging request at virtual address 0000800074c12000 [ 0.516053] Mem abort info: [ 0.516222] ESR = 0x96000004 [ 0.516417] Exception class = DABT (current EL), IL = 32 bits [ 0.516641] SET = 0, FnV = 0 [ 0.516826] EA = 0, S1PTW = 0 [ 0.516984] Data abort info: [ 0.517149] ISV = 0, ISS = 0x00000004 [ 0.517339] CM = 0, WnR = 0 [ 0.517553] [0000800074c12000] user address but active_mm is swapper [ 0.517928] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 0.518305] Modules linked in: [ 0.518839] CPU: 0 PID: 13 Comm: kdevtmpfs Not tainted 4.19.0-rc5-next-20180928-00002-g2ba39ab0cd01-dirty #82 [ 0.519307] Hardware name: linux,dummy-virt (DT) [ 0.519681] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.519959] pc : __destroy_inode+0x94/0x2a8 [ 0.520212] lr : __destroy_inode+0x78/0x2a8 [ 0.520401] sp : ffff0000098c3b20 [ 0.520590] x29: ffff0000098c3b20 x28: 00000000087a3714 [ 0.520904] x27: 0000000000002000 x26: 0000000000002000 [ 0.521179] x25: ffff000009583000 x24: 0000000000000000 [ 0.521467] x23: ffff80007bb52000 x22: ffff80007bbaa7c0 [ 0.521737] x21: ffff0000093f9338 x20: 0000000000000000 [ 0.522033] x19: ffff80007bbb05d8 x18: 0000000000000400 [ 0.522376] x17: 0000000000000000 x16: 0000000000000000 [ 0.522727] x15: 0000000000000400 x14: 0000000000000400 [ 0.523068] x13: 0000000000000001 x12: 0000000000000001 [ 0.523421] x11: 0000000000000000 x10: 0000000000000970 [ 0.523749] x9 : ffff0000098c3a60 x8 : ffff80007bbab190 [ 0.524017] x7 : ffff80007bbaa880 x6 : 0000000000000c88 [ 0.524305] x5 : ffff0000093d96c8 x4 : 61c8864680b583eb [ 0.524567] x3 : ffff0000093d6180 x2 : ffffffffffffffff [ 0.524872] x1 : 0000800074c12000 x0 : 0000800074c12000 [ 0.525207] Process kdevtmpfs (pid: 13, stack limit = 0x(____ptrval____)) [ 0.525529] Call trace: [ 0.525806] __destroy_inode+0x94/0x2a8 [ 0.526108] destroy_inode+0x34/0x88 [ 0.526370] evict+0x144/0x1c8 [ 0.526636] iput+0x184/0x230 [ 0.526871] dentry_unlink_inode+0x118/0x130 [ 0.527152] d_delete+0xd8/0xe0 [ 0.527420] vfs_unlink+0x240/0x270 [ 0.527665] handle_remove+0x1d8/0x330 [ 0.527875] devtmpfsd+0x138/0x1c8 [ 0.528085] kthread+0x14c/0x158 [ 0.528291] ret_from_fork+0x10/0x18 [ 0.528720] Code: 92800002 aa1403e0 d538d081 8b010000 (c85f7c04) [ 0.529367] ---[ end trace 5a3dee47727f877c ]--- Rework to set suppress_bind_attrs flag to avoid removing the device when CONFIG_DEBUG_TEST_DRIVER_REMOVE=y. This applies for pic32_uart and xilinx_uartps as well. Co-developed-by:
-
Anders Roxell authored
[ Upstream commit 347a28b5 ] This happened while running in qemu-system-aarch64, the AMBA PL011 UART driver when enabling CONFIG_DEBUG_TEST_DRIVER_REMOVE. arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init), devtmpfs' handle_remove() crashes because the reference count is a NULL pointer only because wb->bdi hasn't been initialized yet. Rework so that wb_put have an extra check if wb->bdi before decrement wb->refcnt and also add a WARN_ON_ONCE to get a warning if it happens again in other drivers. Fixes: 52ebea74 ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks") Co-developed-by:
-
Miroslav Lichvar authored
[ Upstream commit e1f65b0d ] It seems with some NICs supported by the e1000e driver a SYSTIM reading may occasionally be few microseconds before the previous reading and if enabled also pass e1000e_sanitize_systim() without reaching the maximum number of rereads, even if the function is modified to check three consecutive readings (i.e. it doesn't look like a double read error). This causes an underflow in the timecounter and the PHC time jumps hours ahead. This was observed on 82574, I217 and I219. The fastest way to reproduce it is to run a program that continuously calls the PTP_SYS_OFFSET ioctl on the PHC. Modify e1000e_phc_gettime() to use timecounter_cyc2time() instead of timecounter_read() in order to allow non-monotonic SYSTIM readings and prevent the PHC from jumping. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Acked-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
João Paulo Rechi Vita authored
[ Upstream commit 78f3ac76 ] In the past, Asus firmwares would change the panel backlight directly through the EC when the display off hotkey (Fn+F7) was pressed, and only notify the OS of such change, with 0x33 when the LCD was ON and 0x34 when the LCD was OFF. These are currently mapped to KEY_DISPLAYTOGGLE and KEY_DISPLAY_OFF, respectively. Most recently the EC on Asus most machines lost ability to toggle the LCD backlight directly, but unless the OS informs the firmware it is going to handle the display toggle hotkey events, the firmware still tries change the brightness through the EC, to no effect. The end result is a long list (at Endless we counted 11) of Asus laptop models where the display toggle hotkey does not perform any action. Our firmware engineers contacts at Asus were surprised that there were still machines out there with the old behavior. Calling WMNB(ASUS_WMI_DEVID_BACKLIGHT==0x00050011, 2) on the _WDG device tells the firmware that it should let the OS handle the display toggle event, in which case it will simply notify the OS of a key press with 0x35, as shown by the DSDT excerpts bellow. Scope (_SB) { (...) Device (ATKD) { (...) Name (_WDG, Buffer (0x28) { /* 0000 */ 0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11, /* 0008 */ 0x8A, 0x39, 0x08, 0x00, 0x20, 0x0C, 0x9A, 0x66, /* 0010 */ 0x4E, 0x42, 0x01, 0x02, 0x35, 0xBB, 0x3C, 0x0B, /* 0018 */ 0xC2, 0xE3, 0xED, 0x45, 0x91, 0xC2, 0x4C, 0x5A, /* 0020 */ 0x6D, 0x19, 0x5D, 0x1C, 0xFF, 0x00, 0x01, 0x08 }) Method (WMNB, 3, Serialized) { CreateDWordField (Arg2, Zero, IIA0) CreateDWordField (Arg2, 0x04, IIA1) Local0 = (Arg1 & 0xFFFFFFFF) (...) If ((Local0 == 0x53564544)) { (...) If ((IIA0 == 0x00050011)) { If ((IIA1 == 0x02)) { ^^PCI0.SBRG.EC0.SPIN (0x72, One) ^^PCI0.SBRG.EC0.BLCT = One } Return (One) } } (...) } (...) } (...) } (...) Scope (_SB.PCI0.SBRG.EC0) { (...) Name (BLCT, Zero) (...) Method (_Q10, 0, NotSerialized) // _Qxx: EC Query { If ((BLCT == Zero)) { Local0 = One Local0 = RPIN (0x72) Local0 ^= One SPIN (0x72, Local0) If (ATKP) { Local0 = (0x34 - Local0) ^^^^ATKD.IANE (Local0) } } ElseIf ((BLCT == One)) { If (ATKP) { ^^^^ATKD.IANE (0x35) } } } (...) } Signed-off-by:
João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Manivannan Sadhasivam authored
[ Upstream commit ed8dce4c ] Keeping the irq_chip definition static will make it shared with multiple giochips in the system. This practice is considered to be bad and now we will get the below warning from gpiolib core: "detected irqchip that is shared with multiple gpiochips: please fix the driver." Hence, move the irq_chip definition from static to `struct pl061` for using a unique irq_chip for each gpiochip. Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Andrew Lunn authored
[ Upstream commit ea89098e ] The 6390 copper ports have an errata which require poking magic values into undocumented magic registers and then performing a software reset. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David Ahern authored
[ Upstream commit d4a7e9bb ] I realized the last patch calls dev_get_by_index_rcu in a branch not holding the rcu lock. Add the calls to rcu_read_lock and rcu_read_unlock. Fixes: ec90ad33 ("ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 36352991 ] There are two new Realtek Ethernet devices which are re-branded r8168h. Add the IDs to to support them. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Daniele Palmas authored
[ Upstream commit f87118d5 ] This patch adds MTU default value to qmap network interface in order to avoid "RTNETLINK answers: No buffer space available" error when setting an ipv6 address. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
David Rientjes authored
[ Upstream commit f8c468e8 ] Commit dcda9b04 ("mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic") replaced __GFP_REPEAT in alloc_skb_with_frags() with __GFP_RETRY_MAYFAIL when the allocation may directly reclaim. The previous behavior would require reclaim up to 1 << order pages for skb aligned header_len of order > PAGE_ALLOC_COSTLY_ORDER before failing, otherwise the allocations in alloc_skb() would loop in the page allocator looking for memory. __GFP_RETRY_MAYFAIL makes both allocations failable under memory pressure, including for the HEAD allocation. This can cause, among many other things, write() to fail with ENOTCONN during RPC when under memory pressure. These allocations should succeed as they did previous to dcda9b04 even if it requires calling the oom killer and additional looping in the page allocator to find memory. There is no way to specify the previous behavior of __GFP_REPEAT, but it's unlikely to be necessary since the previous behavior only guaranteed that 1 << order pages would be reclaimed before failing for order > PAGE_ALLOC_COSTLY_ORDER. That reclaim is not guaranteed to be contiguous memory, so repeating for such large orders is usually not beneficial. Removing the setting of __GFP_RETRY_MAYFAIL to restore the previous behavior, specifically not allowing alloc_skb() to fail for small orders and oom kill if necessary rather than allowing RPCs to fail. Fixes: dcda9b04 ("mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic") Signed-off-by:
David Rientjes <rientjes@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 674bed5d ] When a VLAN is deleted from a bridge port we should not change the PVID unless the deleted VLAN is the PVID. Fixes: fe9ccc78 ("mlxsw: spectrum_switchdev: Don't batch VLAN operations") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit 8adbe212 ] Make sure that lag port TX is disabled before mlxsw_sp_port_lag_leave() is called and prevent from possible EMAD error. Fixes: 0d65fc13 ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by:
-
David Ahern authored
[ Upstream commit ec90ad33 ] Similar to c5ee0663 ("ipv6: Consider sk_bound_dev_if when binding a socket to an address"), binding a socket to v4 mapped addresses needs to consider if the socket is bound to a device. This problem also exists from the beginning of git history. Signed-off-by:
-
- 23 Jan, 2019 2 commits
-
-
Greg Kroah-Hartman authored
-
Jan Kara authored
commit c8a83a6b upstream. NBD can update block device block size implicitely through bd_set_size(). Make it explicitely set blocksize with set_blocksize() as this behavior of bd_set_size() is going away. CC: Josef Bacik <jbacik@fb.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
