- 17 Jul, 2016 16 commits
-
-
Marcelo Ricardo Leitner authored
Commit d46e416c missed to update some other places which checked for the socket being TCP-style AND Established state, as Closing state has some overlapping with the previous understanding of Established. Without this fix, one of the effects is that some already queued rx messages may not be readable anymore depending on how the association teared down, and sending may also not be possible if peer initiated the shutdown. Also merge two if() blocks into one condition on sctp_sendmsg(). Cc: Xin Long <lucien.xin@gmail.com> Fixes: d46e416c ("sctp: sctp should change socket state when shutdown is received") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
David S. Miller authored
Dongpo Li says: ==================== Add Hisilicon MDIO bus driver and FEMAC driver This patch set adds a Hisilicon MDIO bus driver and a Fast Ethernet MAC(FEMAC) driver. We also abstract a general interface "of_phy_get_and_connect" for PHY connect. User will have no bother with getting "phy-mode" and "phy-handle" any more. Changes in v1: - Pass private data structure instead of struct mii_bus in MDIO read and write operation. - Return the error which devm_clk_get() gives when MDIO probe. - Leave the clock unprepared and disabled on error when MDIO probe. - Abstract a general interface "of_phy_get_and_connect" for PHY connect. - Remove the "_reset" suffixes in "reset-names" property. - Enable tx per-packet interrupt when tx fifo full. - Remove pointless compatible and add SoC specific compatible. - Declare only one clock in MAC dts documentation. - Add standard unit suffixes for "phy-reset-delays". - Use a smaller NAPI poll weight 16 for our Fast Ethernet MAC. - Use phy_ethtool_{get|set}_link_ksettings for ethtool ops. - Use phydev from struct net_device in MAC driver. ==================== Signed-off-by: -
Dongpo Li authored
This patch adds the Hisilicon Fast Ethernet MAC(FEMAC) driver. The FEMAC supports max speed 100Mbps and has been used in many Hisilicon SoC. Signed-off-by:
Dongpo Li <lidongpo@hisilicon.com> Reviewed-by:
Jiancheng Xue <xuejiancheng@hisilicon.com> Signed-off-by:
-
Dongpo Li authored
Abstract a general interface "of_phy_get_and_connect" for PHY connect. User will have no bother with getting "phy-mode" and "phy-handle" any more. Suggested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Dongpo Li authored
This patch adds a separate driver for the MDIO interface of the Hisilicon Fast Ethernet MAC. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Uwe Kleine-König authored
TI_CPSW_PHY_SEL depended on TI_CPSW and was selected by the latter. So there is no reason to have this symbol visible. A further optimisation would be to put the code for both symbols into a single module which would allow to not export at least cpsw_phy_sel() and simplify the module load process. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Zhao Qiang authored
It was used err_xxx for labeled statement, it is not easy to understand, now use free_xxx for labeled statement. Signed-off-by:
Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by:
-
Zhao Qiang authored
'uhdlc_priv' has freed twice, drop the first one. Signed-off-by:
-
Nikolay Aleksandrov authored
In preparation for hardware offloading of ipmr/ip6mr we need an interface that allows to check (and later update) the age of entries. Relying on stats alone can show activity but not actual age of the entry, furthermore when there're tens of thousands of entries a lot of the hardware implementations only support "hit" bits which are cleared on read to denote that the entry was active and shouldn't be aged out, these can then be naturally translated into age timestamp and will be compatible with the software forwarding age. Using a lastuse entry doesn't affect performance because the members in that cache line are written to along with the age. Since all new users are encouraged to use ipmr via netlink, this is exported via the RTA_EXPIRES attribute. Also do a minor local variable declaration style adjustment - arrange them longest to shortest. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Shrijeet Mukherjee <shm@cumulusnetworks.com> CC: Satish Ashok <sashok@cumulusnetworks.com> CC: Donald Sharp <sharpd@cumulusnetworks.com> CC: David S. Miller <davem@davemloft.net> CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> CC: James Morris <jmorris@namei.org> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Kristian Evensen authored
Some devices of the same type all export the same, random MAC address. This behavior has been seen on the ZTE MF910, MF823 and MF831, and there are probably more devices out there. Fix this by generating a valid random MAC address if we read a random MAC from device. Also, changed the memcpy() to ether_addr_copy(), as pointed out by checkpatch. Suggested-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: simplify receive path and consolidate forwarding paths This set tries to simplify the receive and forwarding paths. Patch 01 is a trivial style adjustment, patch 02 removes one conditional from the unicast fast path, patch 03 removes another conditional and more imporantly removes the skb0/skb2 ambiguity about locally receiving the skb and switches to a boolean called "local_rcv". Patch 04 is the most important change which consolidates the forwarding paths for locally originated and forwarded packets into __br_forward. This allows us to remove the function pointers giving a minor performance boost, more importantly it makes it much easier to reason about the forwarding path and reduces the code duplication that was needed when making changes. Also it allows the receive path to fully setup the environment prior to calling any forwarding functions (i.e. to properly set unicast, local_rcv and search for unicast/mcast dst). Functionally everything should stay the same after this set. I've done basic tests with unicast/multicast/broadcast Tx/Rx. Please review carefully. ==================== Signed-off-by: -
Nikolay Aleksandrov authored
Before this patch we had two flavors of most forwarding functions - _forward and _deliver, the difference being that the latter are used when the packets are locally originated. Instead of all this function pointer passing and code duplication, we can just pass a boolean noting that the packet was locally originated and use that to perform the necessary checks in __br_forward. This gives a minor performance improvement but more importantly consolidates the forwarding paths. Also add a kernel doc comment to explain the exported br_forward()'s arguments. Signed-off-by:
-
Nikolay Aleksandrov authored
Currently if the packet is going to be received locally we set skb0 or sometimes called skb2 variables to the original skb. This can get confusing and also we can avoid one conditional on the fast path by simply using a boolean and passing it around. Thanks to Roopa for the name suggestion. Signed-off-by:
-
Nikolay Aleksandrov authored
This patch removes one conditional from the unicast path by using the fact that skb is NULL only when the packet is multicast or is local. Signed-off-by:
-
Nikolay Aleksandrov authored
Trivial style changes in br_handle_frame_finish. Signed-off-by:
-
- 16 Jul, 2016 1 commit
-
-
Richard Sailer authored
This adds kernel-doc style descriptions for 6 functions and fixes 1 typo. Signed-off-by:
Richard Sailer <richard@weltraumpflege.org> Signed-off-by:
-
- 15 Jul, 2016 23 commits
-
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. There was a check on CAP_NET_ADMIN in cpmac_set_settings, but this check is already done in dev_ethtool, so no need to repeat it before calling the generic function. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. There was a check on CAP_NET_ADMIN in au1000_set_settings, but this check is already done in dev_ethtool, so no need to repeat it before calling the generic function. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by:Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Jesper Dangaard Brouer authored
The recent change to tracepoint napi:napi_poll changed the order of the parameters that perf scripts sees, the printk was correct. The problem was that the new parameters (work and budget) were pushed in front of dev_name. The new parameters obviously need to be appended to keep backward compatible. Fixes: 1db19db7 ("net: tracepoint napi:napi_poll add work and budget") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Jason Wang authored
This patch switch to use skb array instead of sk_receive_queue to avoid spinlock contentions. Tests shows about 21% improvements for guest rx pps: Before: 1472731 pkts/s After: 1786289 pkts/s Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Jason Wang authored
We decide the rxq through calculating its hash which is not necessary if we only have one rx queue. So this patch skip this and just return queue 0. Test shows 22% improving on guest rx pps. Before: 1201504 pkts/s After: 1472731 pkts/s Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF event output helper improvements This set adds improvements to the BPF event output helper to support non-linear data sampling, here specifically, for skb context. For details please see individual patches. The set is based against net-next tree. v1 -> v2: - Integrated and adapted Peter's diff into patch 1, updated the remaining ones accordingly. Thanks Peter! ==================== Signed-off-by: -
Daniel Borkmann authored
This work addresses a couple of issues bpf_skb_event_output() helper currently has: i) We need two copies instead of just a single one for the skb data when it should be part of a sample. The data can be non-linear and thus needs to be extracted via bpf_skb_load_bytes() helper first, and then copied once again into the ring buffer slot. ii) Since bpf_skb_load_bytes() currently needs to be used first, the helper needs to see a constant size on the passed stack buffer to make sure BPF verifier can do sanity checks on it during verification time. Thus, just passing skb->len (or any other non-constant value) wouldn't work, but changing bpf_skb_load_bytes() is also not the proper solution, since the two copies are generally still needed. iii) bpf_skb_load_bytes() is just for rather small buffers like headers, since they need to sit on the limited BPF stack anyway. Instead of working around in bpf_skb_load_bytes(), this work improves the bpf_skb_event_output() helper to address all 3 at once. We can make use of the passed in skb context that we have in the helper anyway, and use some of the reserved flag bits as a length argument. The helper will use the new __output_custom() facility from perf side with bpf_skb_copy() as callback helper to walk and extract the data. It will pass the data for setup to bpf_event_output(), which generates and pushes the raw record with an additional frag part. The linear data used in the first frag of the record serves as programmatically defined meta data passed along with the appended sample. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
Split the bpf_perf_event_output() helper as a preparation into two parts. The new bpf_perf_event_output() will prepare the raw record itself and test for unknown flags from BPF trace context, where the __bpf_perf_event_output() does the core work. The latter will be reused later on from bpf_event_output() directly. Signed-off-by:
-
Daniel Borkmann authored
This patch adds support for non-linear data on raw records. It extends raw records to have one or multiple fragments that will be written linearly into the ring slot, where each fragment can optionally have a custom callback handler to walk and extract complex, possibly non-linear data. If a callback handler is provided for a fragment, then the new __output_custom() will be used instead of __output_copy() for the perf_output_sample() part. perf_prepare_sample() does all the size calculation only once, so perf_output_sample() doesn't need to redo the same work anymore, meaning real_size and padding will be cached in the raw record. The raw record becomes 32 bytes in size without holes; to not increase it further and to avoid doing unnecessary recalculations in fast-path, we can reuse next pointer of the last fragment, idea here is borrowed from ZERO_OR_NULL_PTR(), which should keep the perf_output_sample() path for PERF_SAMPLE_RAW minimal. This facility is needed for BPF's event output helper as a first user that will, in a follow-up, add an additional perf_raw_frag to its perf_raw_record in order to be able to more efficiently dump skb context after a linear head meta data related to it. skbs can be non-linear and thus need a custom output function to dump buffers. Currently, the skb data needs to be copied twice; with the help of __output_custom() this work only needs to be done once. Future users could be things like XDP/BPF programs that work on different context though and would thus also have a different callback function. The few users of raw records are adapted to initialize their frag data from the raw record itself, no change in behavior for them. The code is based upon a PoC diff provided by Peter Zijlstra [1]. [1] http://thread.gmane.org/gmane.linux.network/421294Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Dan Carpenter authored
The rxrpc_lookup_peer() function returns NULL on error, it never returns error pointers. Fixes: 8496af50 ('rxrpc: Use RCU to access a peer's service connection tree') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Philipp Zabel authored
We can't detect the FXEN (fiber mode) bootstrap pin, so configure it via a boolean device tree property "micrel,fiber-mode". If it is enabled, auto-negotiation is not supported. The only available modes are 100base-fx (full duplex and half duplex). Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
