The RFBI driver uses dispc_mgr_set_lcd_size() to set the width and height of
the LCD manager. Replace this to use dispc_mgr_set_lcd_timings(), pass dummy
blanking parameters like done in the DSI driver.

This prevents the need to export dispc_mgr_set_lcd_size(), and use a common
function to set lcd timings.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

code depending on FB_OMAP_BOOTLOADER_INIT has been removed long before
(e.g. Tomi Valkeinen, 03 Mar 2011: OMAP: DSS2: Remove FB_OMAP_BOOTLOADER_INIT
support), but the option still exists Kconfig and has no use
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

The EDT ET0500G0DH6 is a 5 inch display. It is
tested on an OMAP3 board.
Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

This patch adds support for the Mitsubishi display
AA084SB01. This is a 7 inch LVDS display. It is tested with
an OMAP3 board.
Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

On pandora we use .set_timings to alter refresh rate,
so add .check_timings/.set_timings functions.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

With this we can eliminate some duplicate code in panel drivers.
Also lgphilips-lb035q02, nec-nl8048hl11-01b, picodlp and
tpo-td043mtea1 gain support of reading timings over sysfs.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

If the size of memory region that is being set up is the same as before,
we don't have to do memory and layer busy checks.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Since any power on stabilisation delay for the supply itself should be
taken care of transparently by the regulator API when the regulator is
enabled the additional delay that the TPO-TD03MTEA1 driver adds after
that returned should be due to the requirements of the device itself
rather than the supply (the delay is also suspicously long for one for
a regulator to ramp). Correct the comment to avoid misleading people
taking this code as a reference.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

It is possible for regulator_enable() to fail and if it does fail that's
generally a bad sign for anything we try to do with the hardware afterwards
so check for and immediately return an error if regulator_enable() fails.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

It is possible for regulator_enable() to fail and if it does fail that's
generally a bad sign for anything we try to do with the hardware afterwards
so check for and immediately return an error if regulator_enable() fails.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

The TAAL driver contains some regulator support which is currently unused
(the code is there but the one panel supported by the driver doesn't have
any regulators provided). This code mostly looks like an open coded
version of the regulator core bulk API.

The only additional feature is that a voltage range can be set once when
the device is opened, though this is never varied at runtime. The general
expectation is that if the device is not actively managing the voltage of
the device (eg, doing DVFS) then any configuration will be done using the
constraints rather than by drivers, saving them code and ensuring that
they work well with systems where the voltage is not configurable.

If systems are added needing regulator support this can be added back in,
though it should be based on core features rather than open coding things.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

For some OMAP versions the TRM says that the pixel clock from DISPC can
be used as an input clock for DSI PLL, instead of the default, which is
sysclk.  For some OMAP versions the bits affecting this are marked as
reserved.  This feature has never been tested, so it's unknown if the HW
even works, and has never been used.

To clean things up, this patch removes the functionality. This should
not affect any board.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Most of the DSS clocks have restrictions on their frequency based on the
OPP in use. For example, maximum frequency for a clock may be 180MHz in
OPP100, but 90MHz in OPP50. This means that when a high enough pixel
clock or function clock is required, we need to use OPP100.

However, there's currently no way in the PM framework to make that kind
of request. The closest we get is to ask for very high bus throughput
from the PM framework, which should effectively force OPP100.

This patch is a simple version for handling the problem. Instead of
asking for OPP100 only when needed, this patch asks for OPP100 whenever
DSS is active. This obviously is not an optimal solution for cases with
small displays where OPP50 would work just fine. However, a proper
solution is a complex one, and this patch is a short term solution for
the problem.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: Kevin Hilman <khilman@ti.com>

omapdss driver needs to use the omap_pm_set_min_bus_tput(), so add a new
entry for that in omapdss's platform data, and set it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: Kevin Hilman <khilman@ti.com>

Otherwise cpu_active_mask will not set, which lead to other issue.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull "ARM: SoC fixes" from Olof Johansson:
 * at91, ux500, imx, omap and bcmring:
  - at91 fixes for =m driver build issues, irqdomain fixes and config
    dependency fixes
  - ux500 kconfig dependency fixes and a  smp wakeup bugfix
  - imx idle bugfix and build fix due to irq domain changes
  - omap uart pinmux fixes, softreset regression revert and misc fixes
  - bcmring build error regression fix

 * ux500 and imx had some small defconfig updates in this branch

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: bcmring: fix UART declarations
  ARM: imx: Fix imx5 idle logic bug
  ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple()
  ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE
  ARM: OMAP1: DMTIMER: fix broken timer clock source selection
  ARM: OMAP: serial: Fix the ocp smart idlemode handling bug
  ARM: OMAP2+: UART: Fix incorrect population of default uart pads
  ARM: OMAP: sram: fix BUG in dpll code for !PM case
  dmaengine: Kconfig: fix Atmel at_hdmac entry
  USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt
  USB: ohci-at91: change annotations for probe/remove functions
  leds-atmel-pwm.c: Make pwmled_probe() __devinit
  ARM: at91: fix at91sam9261ek Ethernet dm9000 irq
  ARM: at91: fix rm9200ek flash size
  ARM: at91: remove empty at91_init_serial function
  ARM: at91: fix typo in at91_pmc_base assembly declaration
  ARM: at91: Export at91_matrix_base
  ARM: at91: Export at91_pmc_base
  ARM: at91: Export at91_ramc_base
  ARM: at91: Export at91_st_base
  ...

Pull MMC fixes from Chris Ball:
 - Build fix for omap_hsmmc with OF against 3.4-rc1.
 - Fix CONFIG_MMC_UNSAFE_RESUME semantics regression against 3.3, which
   broke hotplug card detection when UNSAFE_RESUME is set.
 - Fix a race condition in omap_hsmmc with runtime PM.
 - Fix two libertas SDIO-powered-resume regressions.
 - Small fixes for discard/sanitize, dw_mmc, cd-gpio and esdhc-imx.

* tag 'mmc-fixes-for-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: core: Do not pre-claim host in suspend
  mmc: dw_mmc: prevent NULL dereference for dma_ops
  mmc: unbreak sdhci-esdhc-imx on i.MX25
  mmc: cd-gpio: Include header to pickup exported symbol prototypes
  mmc: sdhci: refine non-removable card checking for card detection
  mmc: dw_mmc: Fix switch from DMA to PIO
  mmc: remove MMC bus legacy suspend/resume method
  mmc: omap_hsmmc: Get rid of of_have_populated_dt() usage
  mmc: omap_hsmmc: build fix for CONFIG_OF=y and CONFIG_MMC_OMAP_HS=m
  mmc: fixes for eMMC v4.5 sanitize operation
  mmc: fixes for eMMC v4.5 discard operation

Pull media fixes from Mauro Carvalho Chehab:
 - Fixes a regression at DVB core when switching from DVB-S2 to DVB-S on
   Kaffeine (Fedora 16 Bugzilla #812895);
 - Fixes a mutex unlock at an error condition at drx-k;
 - Fix winbond-cir set mode;
 - mt9m032: Fix a compilation breakage with some random Kconfig;
 - mt9m032: fix two dead locks;
 - xc5000: don't require an special firmware (that won't be provided by
   the vendor) just because the xtal frequency is different;
 - V4L DocBook: fix some typos at multi-plane formats description.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware
  [media] V4L: mt9m032: fix compilation breakage
  [media] V4L: DocBook: Fix typos in the multi-plane formats description
  [media] V4L: mt9m032: fix two dead-locks
  [media] rc-core: set mode for winbond-cir
  [media] drxk: Does not unlock mutex if sanity check failed in scu_command()
  [media] dvb_frontend: Fix a regression when switching back to DVB-S

Pull MFD fixes from Samuel Ortiz:
 "We have 3 build fixes, a OMAP USB host PHY reset fix and the twl6040
  conversion to an i2c driver.  The latter may not sound like a fix but
  the twl6040 MFD driver won't probe without it, triggering an OMAP4
  audio regression."

* tag 'mfd-for-linus-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Fix modular builds of rc5t583 regulator support
  mfd: Fix asic3_gpio_to_irq
  ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue
  mfd: Convert twl6040 to i2c driver, and separate it from twl core
  mfd : Fix dbx500 compilation error

it's always current->mm
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

pfm_vm_munmap() is simply vm_munmap() and pfm_remove_smpl_mapping()
always get current as the first argument.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... since exit_mmap() is coming and it will munmap() everything anyway.
In all other cases aio_free_ring() has ctx->mm == current->mm; moreover,
all other callers of vm_munmap() have mm == current->mm, so this will
allow us to get rid of mm argument of vm_munmap().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Since SDIO drivers may want to do some SDIO operations in their suspend
callback functions, we must not keep the host claimed when calling them.

Daniel Drake reported that libertas_sdio encountered a deadlock in its
suspend function.
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Tested-by: Daniel Drake <dsd@laptop.org>
[stable@: please apply to 3.2-stable and 3.3-stable]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

Now, dma_ops is assumed that use the IDMAC.  But if dma_ops is assigned
the pdata->dma_ops, we didn't ensure that callback function is defined.

If the callback isn't defined, then we should run in PIO mode.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

This was broken by me in 37865fe9
("mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci") where more
extensive tests would have shown that read or write of data to the
card were failing (even if the partition table was correctly read).
Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

Include the linux/mmc/cd-gpio.h header to pickup the prototypes
for the two exported symbols.

This quiets the sparse warnings:

warning: symbol 'mmc_cd_gpio_request' was not declared. Should it be static?
warning: symbol 'mmc_cd_gpio_free' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

Commit c79396c1 ("mmc: sdhci: prevent card detection activity
for non-removable cards") disables card detection where the cards
are marked as non-removable.

This makes sense, but the implementation detail of calling
mmc_card_is_removable() causes some problems, because
mmc_card_is_removable() is overloaded with CONFIG_MMC_UNSAFE_RESUME
semantics.

In the OLPC XO case, we need CONFIG_MMC_UNSAFE_RESUME because our root
filesystem is stored on SD, but we also have external SD card slots
where we want automatic card detection.

Refine the check to only apply to hosts marked as MMC_CAP_NONREMOVABLE,
which is defined to mean that the card is *really* nonremovable. This
could be revisited in future if we find a way to improve
CONFIG_MMC_UNSAFE_RESUME semantics.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
[stable@: please apply to 3.3-stable]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

When dw_mci_pre_dma_transfer returns failure in some reasons,
dw_mci_submit_data will prepare to switch the PIO mode from DMA.
After switching to PIO mode, DMA(IDMAC in particular) is still
enabled. This makes the corruption in handling interrupt and
the driver lock-up.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

MMC bus is using legacy suspend/resume method, which is not compatible if
runtime pm callbacks are used. In this scenario, MMC bus suspend/resume
callbacks cannot be called when system entering S3. So change to use the
new defined dev_pm_ops for system sleeping mode.

Tested on AM335x Platform. Solves major issue/crash reported at
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg65425.htmlSigned-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Tested-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

This continues the theme started with vm_brk() and vm_munmap():
vm_mmap() does the same thing as do_mmap(), but additionally does the
required VM locking.

This uninlines (and rewrites it to be clearer) do_mmap(), which sadly
duplicates it in mm/mmap.c and mm/nommu.c.  But that way we don't have
to export our internal do_mmap_pgoff() function.

Some day we hopefully don't have to export do_mmap() either, if all
modular users can become the simpler vm_mmap() instead.  We're actually
very close to that already, with the notable exception of the (broken)
use in i810, and a couple of stragglers in binfmt_elf.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Like the vm_brk() function, this is the same as "do_munmap()", except it
does the VM locking for the caller.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

of_have_populated_dt() is not expected to be used in drivers but
instead only in early platform init code.
Drivers on the other hand should rely on dev->of_node or of_match_device().
Besides usage of of_have_populated_dt() also throws up build error as below
which was reported by Balaji TK, when omap_hsmmc is built as a module.

ERROR: "allnodes" [drivers/mmc/host/omap_hsmmc.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

So get rid of all of_have_populated_dt() usage in omap_hsmmc driver and
instead use dev->of_node to make the same dicisions as earlier.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Reported-by: Benoit Cousson <b-cousson@ti.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Reviewed-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

Commit 46856a68 ("mmc: omap_hsmmc: Convert hsmmc driver to use device tree")
introduced in 3.4-rc1 has a missing semi-colon, causing:

drivers/mmc/host/omap_hsmmc.c:1745: error: expected ',' or ';' before 'extern'
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Chris Ball <cjb@laptop.org>

eMMC v4.5 sanitize operation erases all copies of unmapped
data.  However trim or erase operations must be used first
to unmap the required sectors.  That was not being done.

Fixes apply to linux 3.2 on.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: <stable@vger.kernel.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

eMMC v4.5 discard operation is significantly different from the
existing trim operation because it is not guaranteed to work with
the new sanitize operation.  Consequently mmc_can_trim() is
separated from mmc_can_discard().

Also the new discard operation does not result in the sectors being
set to all-zeros, so discard_zeroes_data must not be set.

In addition, the new discard has the same timeout as trim, but from
v4.5 trim is defined to use the hc timeout.  The timeout calculation
is adjusted accordingly.

Fixes apply to linux 3.2 on.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: <stable@vger.kernel.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

It does the same thing as "do_brk()", except it handles the VM locking
too.

It turns out that all external callers want that anyway, so we can make
do_brk() static to just mm/mmap.c while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-torvalds-20120418' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fixes from Linus Walleij:
 - Fixed compilation errors and warnings
 - Stricter checks on the ops vtable

* tag 'for-torvalds-20120418' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: implement pinctrl_check_ops
  pinctrl: include <linux/bug.h> to prevent compile errors
  pinctrl: fix compile error if not select PINMUX support

Pull 3 tiny tty bugfixes from Greg Kroah-Hartman.

* tag 'tty-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  drivers/tty/amiserial.c: add missing tty_unlock
  pch_uart: Fix dma channel unallocated issue
  ARM: clps711x: serial driver hungs are a result of call disable_irq within ISR

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of tiny USB fixes for 3.4-rc4.

  Most of them are in the USB gadget area, but a few other minor USB
  driver and core fixes are here as well.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (36 commits)
  USB: serial: cp210x: Fixed usb_control_msg timeout values
  USB: ehci-tegra: don't call set_irq_flags(IRQF_VALID)
  USB: yurex: Fix missing URB_NO_TRANSFER_DMA_MAP flag in urb
  USB: yurex: Remove allocation of coherent buffer for setup-packet buffer
  drivers/usb/misc/usbtest.c: add kfrees
  USB: ehci-fsl: Fix kernel crash on mpc5121e
  uwb: fix error handling
  uwb: fix use of del_timer_sync() in interrupt
  EHCI: always clear the STS_FLR status bit
  EHCI: fix criterion for resuming the root hub
  USB: sierra: avoid QMI/wwan interface on MC77xx
  usb: usbtest: avoid integer overflow in alloc_sglist()
  usb: usbtest: avoid integer overflow in test_ctrl_queue()
  USB: fix deadlock in bConfigurationValue attribute method
  usb: gadget: eliminate NULL pointer dereference (bugfix)
  usb: gadget: uvc: Remove non-required locking from 'uvc_queue_next_buffer' routine
  usb: gadget: rndis: fix Missing req->context assignment
  usb: musb: omap: fix the error check for pm_runtime_get_sync
  usb: gadget: udc-core: fix asymmetric calls in remove_driver
  usb: musb: omap: fix crash when musb glue (omap) gets initialized
  ...