- 31 Jan, 2008 40 commits
-
-
Dmitry Torokhov authored
Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Dmitry Torokhov authored
- link input device with its parent so that it placed in proper spot in sysfs hierarchy - drivers that allow changing their keymaps should use private copy of the keymap so that one instance of a device does not affect another instance - it is preferred for drivers to properly set up input_dev->phys to help userspace locate devices - drivers should use usb_to_input_id(), or perform endianess conversion, themselves, otherwise ID is not correct on big-endian boxes - whitespace and formatting cleanup Acked-by:
Daniel Mack <daniel@caiaq.de> Signed-off-by:
-
Takashi Iwai authored
Fix indent of caiaq in Kconfig to the same level as others. Just a tidy up. Signed-off-by:
-
Takashi Iwai authored
The last patch for value range checks included a broken merge result. Now fixed properly. Signed-off-by:
-
Kamalesh Babulal authored
The kernel build fails, with following error CC sound/ppc/tumbler.o sound/ppc/tumbler.c: In function ‘snapper_get_capture_source’: sound/ppc/tumbler.c:812: error: ‘union <anonymous>’ has no member named ‘value’ sound/ppc/tumbler.c: In function ‘snapper_put_capture_source’: sound/ppc/tumbler.c:824: error: ‘union <anonymous>’ has no member named ‘enuemerated’ make[2]: *** [sound/ppc/tumbler.o] Error 1 make[1]: *** [sound/ppc] Error 2 make: *** [sound] Error 2 Signed-off-by:
Kamalesh Babulal <kamalesh@linx.vnet.ibm.com> Signed-off-by:
-
Takashi Iwai authored
Volume knob controls with STAC codecs seem to cause problems with some devices. Volumes change very slowly or silent suddenly. It's likely due to conflict between the software and the hardware volume knob setup. Since we'll have a virtual master control in future, it's safer to remove this control completely right now. Signed-off-by:
-
Takashi Iwai authored
Show more attributs of volume-knob widgets. Also don't put empty lines when no connection list is found. Signed-off-by:
-
Ingo Molnar authored
not sleeping for every codec read/write but doing a short udelay and a conditional reschedule has cut suspend+resume latency by about 1 second on my T60. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Wolke Liu authored
This patch is to add R6xx HDMI audio support. Meanwhile, the device ID in the previous patch is changed. I have checked the patch from Herton Ronaldo Krzesinski, it's right as our spec said. :) Signed-off-by:
Wolke Liu <Wolke.Liu@amd.com> Signed-off-by:
Andrea Zhang <Andrea.Zhang@amd.com> Signed-off-by:
-
Takashi Iwai authored
Use snd_ctl_boolean_mono_info callback to simplify. Signed-off-by:
-
Takashi Iwai authored
Check the value ranges in ctl put callbacks properly (in the rest drivers). Signed-off-by:
-
Takashi Iwai authored
Check the value ranges in ctl put callbacks properly in aoa drivers. Signed-off-by:
-
Takashi Iwai authored
Check the value ranges in ctl put callbacks properly in ak4xxx-adda driver. Signed-off-by:
-
Takashi Iwai authored
Check the value ranges in ctl put callbacks properly in snd-powermac driver. Signed-off-by:
-
Takashi Iwai authored
Check the value ranges in ctl put callbacks in vxpocket driver. Signed-off-by:
-
Takashi Iwai authored
Clean up ctl callbacks of SE-200PCI driver. Also make sure to check the value ranges. Signed-off-by:
-
Takashi Iwai authored
Check the value ranges in ctl put callbacks properly in the rest of PCI drivers. Signed-off-by:
-
Takashi Iwai authored
Check the value ranges in ctl put callbacks properly. Also fixed some coding style issues around that. Signed-off-by:
-
Takashi Iwai authored
Check the value ranges in ctl put callbacks properly. Also fixed the wrong access type to enum elements in aureon.c. Signed-off-by:
-
Takashi Iwai authored
Check the value ranges in ctl put callbacks properly so that invalid values won't be stored or written to registers. Signed-off-by:
-
Takashi Iwai authored
Check value ranges in ctl callbacks properly. This fixes the unexpected crash due to wrong value assignment. Also, remove invalid comments in the last patch. Signed-off-by:
-
Vladimir Barinov authored
This patch adds ALSA SoC support for TI TLV320AIC3X audio codecs. The features that are supported: o Capture/Playback/Bypass. o 16/20/24/32 bit audio. o 8k - 96k sample rates. o codec master only mode o DAPM. Signed-off-by:Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by:
-
Julia Lawall authored
Continue is not needed at the bottom of a loop. The semantic patch implementing this change is as follows: @@ @@ for (...;...;...) { ... if (...) { ... - continue; } } Signed-off-by:Julia Lawall <julia@diku.dk> Signed-off-by:
-
Takashi Iwai authored
Added the missing model string for the new support of HP TC T5735. Signed-off-by:
-
Kailang Yang authored
Added the support of HP Thin Client T5735 [0x103c 0x302f] with ALC262 codec. Signed-off-by:
Kailang Yang <kailang@realtek.com.tw> Signed-off-by:
-
James Courtier-Dutton authored
Signed-off-by:
James Courtier-Dutton <James@superbug.co.uk> Signed-off-by:
-
Jiang Zhe authored
When a mic jack is set up as the multiple I/O, it may issue the automute function wrongly. This patch fixes the wrong automute detection. Signed-off-by:
Jiang Zhe <zhe.jiang@intel.com> Signed-off-by:
-
Jiang Zhe authored
Dell laptops have multiple HP jacks that can be used for multi-channel outputs. The current auto pincfg handles the speaker as the primary output and thus cannot handle the multi-channel configuration for such cases. This patch adds a workaround to fix this issue by swapping the HP and speaker during multi-channel setup routines. Signed-off-by:
-
Jiang Zhe authored
Updated dell-m82 model pin config table. The old config doesn't work with Dell 1210 and co. Signed-off-by:
-
Nicolas Kaiser authored
Remove duplicated defines. (From their use it looks like 'midiDataOutx are written to rather than read from.) Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
-
Jiri Olsa authored
remove dead config symbols from sound code Signed-off-by:
Jiri Olsa <olsajiri@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Stanislav Brabec authored
On Zaurus SL-C3200 (terrier/spitz) based on WM8750, treble scale is inconveniently reverted (increase level = decrease treble), in opposite to bass scale, which uses convenient scale. Fix ALSA WM8750 mixer treble to use convenient treble scale (increase = increase treble level) From: Stanislav Brabec <utx@penguin.cz> Signed-off-by:
-
Takashi Iwai authored
Updated the forgotten SNDRV_HWDEP_IFACE_LAST to point the really last member. Signed-off-by:
-
Nicolas Kaiser authored
Remove line duplications in defines. Acked-by:
Thomas Sailer <sailer@ife.ee.ethz.ch> Signed-off-by:
-
Matthew Ranostay authored
Added more laptops subsystem id's that have STAC9228 DMIC support. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Timofei Bondarenko authored
Enable capturing of raw 32bit IEC958_SUBFRAME. The 24-bits PCM data can be obtained using iec958 plugin. Known problem: captured stream may begin with either left or right subframe. Since the iec958 plugin doesn't decode preamble it may swap the channels sometime. Signed-off-by:
Timofei Bondarenko <tim@ipi.ac.ru> Signed-off-by:
-
Timofei Bondarenko authored
Setting the ADC48K44K greatly improves capture quality at 48k sampling rate. With this bit clear ADC does ZOH interpolation of every 22th sample at 48k. At frequencies higher than 48k there ADC performs a little better with ADC48K44K bit set. At 44.1k ADC performs a little better with this bit clear. At frequencies below 44.1k there is no difference. Signed-off-by:
-
Takashi Iwai authored
Added new PCI SSIDs for HP machines with ALC262 codec. Signed-off-by:
-
Matthew Ranostay authored
Added analog loopback support and missing ADC capture mixer for the STAC92HD71 codec family. Signed-off-by:
-
Manuel Lauss authored
Change loops in ac97_read/write functions to count down to zero rather than up. Gcc will then use the 'dt' (decrement-and-test) op instead of an increment/compare op-pair. Signed-off-by:
Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by:
-
