Transactions to send data for a network device can be allocated at
any time up until the point the TX queue is stopped.  It is possible
for ipa_start_xmit() to be called in one context just before a
the transmit queue is stopped in another.

Update gsi_channel_trans_last() so that for TX channels the
allocated and pending transaction lists are checked--in addition
to the completed and polled lists--to determine the "last"
transaction.  This means any transaction that has been allocated
before the TX queue is stopped will be allowed to complete before
we conclude the channel is quiesced.

Rework the function a bit to use a list pointer and gotos.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

No completion interrupts will occur while an endpoint is suspended,
nor when a channel has been stopped for suspend.  So there's no need
to disable the interrupt during suspend and re-enable it when
resuming.  Without any interrupts occurring, there is no need to
disable/re-enable NAPI for channel suspend/resume either.

We'll only enable NAPI and the interrupt when we first start the
channel, and disable it again only when it's "really" stopped.

To accomplish this, move the enable/disable calls out of
__gsi_channel_start() and __gsi_channel_stop(), and into
gsi_channel_start() and gsi_channel_stop() instead.

Add a call to napi_synchronize() to gsi_channel_suspend(), to ensure
NAPI polling is done before moving on.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Disable both the I/O completion interrupt and NAPI polling on a
channel *after* we successfully stop it rather than before.  This
ensures a completion occurring just before the channel is stopped
gets processed.

Enable NAPI polling and the interrupt *before* starting a channel
rather than after, to be symmetric.  A stopped channel won't
generate any completion interrupts anyway.

Enable NAPI before the interrupt and disable it afterward.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Open-code gsi_channel_freeze() and gsi_channel_thaw() in all callers
and get rid of these two functions.  This is part of reworking the
sequence of things done during channel suspend/resume and start/stop.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Create a new function that does most of the work of starting a
channel.  What's different is that it takes a flag indicating
whether the channel should really be started or not.  Create
another new function __gsi_channel_stop() that behaves similarly.

IPA v3.5.1 implements suspend using a special SUSPEND endpoint
setting.  If the endpoint is suspended when an I/O completes on the
underlying GSI channel, a SUSPEND interrupt is generated.

Newer versions of IPA do not implement the SUSPEND endpoint mode.
Instead, endpoint suspend is implemented by simply stopping the
underlying GSI channel.  In this case, a completing I/O on a
*stopped* channel causes the SUSPEND interrupt condition.

These new functions put all activity related to starting or stopping
a channel (including "thawing/freezing" the channel) in one place,
whether or not the channel is actually started or stopped.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Create a new helper function that encapsulates issuing a set of
channel stop commands, retrying if appropriate, with a short delay
between attempts.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If an error occurs starting a channel, don't "thaw" it.
We should assume the channel remains in a non-started state.

Update the comment in gsi_channel_stop(); calls to this function
are no longer retried.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Avoid the assumption that ksize(kmalloc(S)) == ksize(kmalloc(S)): when
cloning an skb, save and restore truesize after pskb_expand_head(). This
can occur if the allocator decides to service an allocation of the same
size differently (e.g. use a different size class, or pass the
allocation on to KFENCE).

Because truesize is used for bookkeeping (such as sk_wmem_queued), a
modified truesize of a cloned skb may result in corrupt bookkeeping and
relevant warnings (such as in sk_stream_kill_queues()).

Link: https://lkml.kernel.org/r/X9JR/J6dMMOy1obu@elver.google.com
Reported-by: syzbot+7b99aafdcc2eedea6178@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210201160420.2826895-1-elver@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With version 0 of the protocol it was legal to encode the 'Subflow Id' in
the MP_PRIO suboption, to specify which subflow would change its 'Backup'
flag. This has been removed from v1 specification: thus, according to RFC
8684 §3.3.8, the resulting 'Length' for MP_PRIO changed from 4 to 3 byte.

Current Linux generates / parses MP_PRIO according to the old spec, using
'Length' equal to 4, and hardcoding 1 as 'Subflow Id'; RFC compliance can
improve if we change 'Length' in other to become 3, leaving a 'Nop' after
the MP_PRIO suboption. In this way the kernel will emit and accept *only*
MP_PRIO suboptions that are compliant to version 1 of the MPTCP protocol.

 unpatched 5.11-rc kernel:
 [root@bottarga ~]# tcpdump -tnnr unpatched.pcap | grep prio
 reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1)
 dropped privs to tcpdump
 IP 10.0.3.2.48433 > 10.0.1.1.10006: Flags [.], ack 1, win 502, options [nop,nop,TS val 4032325513 ecr 1876514270,mptcp prio non-backup id 1,mptcp dss ack 14084896651682217737], length 0

 patched 5.11-rc kernel:
 [root@bottarga ~]# tcpdump -tnnr patched.pcap | grep prio
 reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1)
 dropped privs to tcpdump
 IP 10.0.3.2.49735 > 10.0.1.1.10006: Flags [.], ack 1, win 502, options [nop,nop,TS val 1276737699 ecr 2686399734,mptcp prio non-backup,nop,mptcp dss ack 18433038869082491686], length 0

Changes since v2:
 - when accounting for option space, don't increment 'TCPOLEN_MPTCP_PRIO'
   and use 'TCPOLEN_MPTCP_PRIO_ALIGN' instead, thanks to Matthieu Baerts.
Changes since v1:
 - refactor patch to avoid using 'TCPOLEN_MPTCP_PRIO' with its old value,
   thanks to Geliang Tang.

Fixes: 06706542 ("mptcp: add the outgoing MP_PRIO support")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Matteo Croce <mcroce@linux.microsoft.com>
Link: https://lore.kernel.org/r/846cdd41e6ad6ec88ef23fee1552ab39c2f5a3d1.1612184361.git.dcaratti@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Emil Renner Berthing says:

====================
drivers: net: update tasklet_init callers

This updates the remaining callers of tasklet_init() in drivers/net
to the new API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")

All changes are done by coccinelle using the following semantic patch.
Coccinelle needs a little help parsing drivers/net/arcnet/arcnet.c

@ match @
type T;
T *container;
identifier tasklet;
identifier callback;
@@
	tasklet_init(&container->tasklet, callback, (unsigned long)container);

@ patch1 depends on match @
type match.T;
identifier match.tasklet;
identifier match.callback;
identifier data;
identifier container;
@@
-void callback(unsigned long data)
+void callback(struct tasklet_struct *t)
{
	...
-	T *container = (T *)data;
+	T *container = from_tasklet(container, t, tasklet);
	...
}

@ patch2 depends on match @
type match.T;
identifier match.tasklet;
identifier match.callback;
identifier data;
identifier container;
@@
-void callback(unsigned long data)
+void callback(struct tasklet_struct *t)
{
	...
-	T *container;
+	T *container = from_tasklet(container, t, tasklet);
	...
-	container = (T *)data;
	...
}

@ depends on (patch1 || patch2) @
match.T *container;
identifier match.tasklet;
identifier match.callback;
@@
-	tasklet_init(&container->tasklet, callback, (unsigned long)container);
+	tasklet_setup(&container->tasklet, callback);
====================

Link: https://lore.kernel.org/r/20210130234730.26565-1-kernel@esmil.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the async and synctty drivers to use the new tasklet API n
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull clang-format update from Miguel Ojeda:
 "Update with the latest for_each macro list"

* tag 'clang-format-for-linux-v5.11-rc7' of git://github.com/ojeda/linux:
  clang-format: Update with the latest for_each macro list

Pull dma-mapping fix from Christoph Hellwig:
 "Fix a kernel crash in the new dma-mapping benchmark test (Barry Song)"

* tag 'dma-mapping-5.11-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: benchmark: fix kernel crash when dma_map_single fails

Pull vdpa fix from Michael Tsirkin:
 "A single mlx bugfix"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/mlx5: Fix memory key MTT population

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.11-rc7, including fixes from bpf and mac80211
  trees.

  Current release - regressions:

   - ip_tunnel: fix mtu calculation

   - mlx5: fix function calculation for page trees

  Previous releases - regressions:

   - vsock: fix the race conditions in multi-transport support

   - neighbour: prevent a dead entry from updating gc_list

   - dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add

  Previous releases - always broken:

   - bpf, cgroup: two copy_{from,to}_user() warn_on_once splats for BPF
     cgroup getsockopt infra when user space is trying to race against
     optlen, from Loris Reiff.

   - bpf: add missing fput() in BPF inode storage map update helper

   - udp: ipv4: manipulate network header of NATed UDP GRO fraglist

   - mac80211: fix station rate table updates on assoc

   - r8169: work around RTL8125 UDP HW bug

   - igc: report speed and duplex as unknown when device is runtime
     suspended

   - rxrpc: fix deadlock around release of dst cached on udp tunnel"

* tag 'net-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
  net: hsr: align sup_multicast_addr in struct hsr_priv to u16 boundary
  net: ipa: fix two format specifier errors
  net: ipa: use the right accessor in ipa_endpoint_status_skip()
  net: ipa: be explicit about endianness
  net: ipa: add a missing __iomem attribute
  net: ipa: pass correct dma_handle to dma_free_coherent()
  r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is set
  net/rds: restrict iovecs length for RDS_CMSG_RDMA_ARGS
  net: mvpp2: TCAM entry enable should be written after SRAM data
  net: lapb: Copy the skb before sending a packet
  net/mlx5e: Release skb in case of failure in tc update skb
  net/mlx5e: Update max_opened_tc also when channels are closed
  net/mlx5: Fix leak upon failure of rule creation
  net/mlx5: Fix function calculation for page trees
  docs: networking: swap words in icmp_errors_use_inbound_ifaddr doc
  udp: ipv4: manipulate network header of NATed UDP GRO fraglist
  net: ip_tunnel: fix mtu calculation
  vsock: fix the race conditions in multi-transport support
  net: sched: replaced invalid qdisc tree flush helper in qdisc_replace
  ibmvnic: device remove has higher precedence over reset
  ...

sup_multicast_addr is passed to ether_addr_equal for address comparison
which casts the address inputs to u16 leading to an unaligned access.
Aligning the sup_multicast_addr to u16 boundary fixes the issue.
Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com>
Link: https://lore.kernel.org/r/20210202090304.2740471-1-ennoerlangen@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 fixes 2021-02-01

Please note the first patch in this series
("Fix function calculation for page trees") is fixing a regression
due to previous fix in net which you didn't include in your previous
rc pr. So I hope this series will make it into your next rc pr,
so mlx5 won't be broken in the next rc.

* tag 'mlx5-fixes-2021-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Release skb in case of failure in tc update skb
  net/mlx5e: Update max_opened_tc also when channels are closed
  net/mlx5: Fix leak upon failure of rule creation
  net/mlx5: Fix function calculation for page trees
====================

Link: https://lore.kernel.org/r/20210202070703.617251-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: a few bug fixes

This series fixes four minor bugs.  The first two are things that
sparse points out.  All four are very simple and each patch should
explain itself pretty well.
====================

Link: https://lore.kernel.org/r/20210201232609.3524451-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix two format specifiers that used %lu for a size_t in "ipa_mem.c".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When extracting the destination endpoint ID from the status in
ipa_endpoint_status_skip(), u32_get_bits() is used.  This happens to
work, but it's wrong: the structure field is only 8 bits wide
instead of 32.

Fix this by using u8_get_bits() to get the destination endpoint ID.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Sparse warns that the assignment of the metadata mask for a QMAP
endpoint in ipa_endpoint_init_hdr_metadata_mask() is a bad
assignment.  We know we want the mask value to be big endian, even
though the value we write is in host byte order.  Use a __force
tag to indicate we really mean it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The virt local variable in gsi_channel_state() does not have an
__iomem attribute but should.  Fix this.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Amy Parker <enbyamy@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The "ring->addr = addr;" assignment is done a few lines later so we
can't use "ring->addr" yet.  The correct dma_handle is "addr".

Fixes: 650d1603 ("soc: qcom: ipa: the generic software interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/YBjpTU2oejkNIULT@mwandaSigned-off-by: Jakub Kicinski <kuba@kernel.org>

So far phy_disconnect() is called before free_irq(). If CONFIG_DEBUG_SHIRQ
is set and interrupt is shared, then free_irq() creates an "artificial"
interrupt by calling the interrupt handler. The "link change" flag is set
in the interrupt status register, causing phylib to eventually call
phy_suspend(). Because the net_device is detached from the PHY already,
the PHY driver can't recognize that WoL is configured and powers down the
PHY.

Fixes: f1e911d5 ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/fe732c2c-a473-9088-3974-df83cfbd6efd@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot found WARNING in rds_rdma_extra_size [1] when RDS_CMSG_RDMA_ARGS
control message is passed with user-controlled
0x40001 bytes of args->nr_local, causing order >= MAX_ORDER condition.

The exact value 0x40001 can be checked with UIO_MAXIOV which is 0x400.
So for kcalloc() 0x400 iovecs with sizeof(struct rds_iovec) = 0x10
is the closest limit, with 0x10 leftover.

Same condition is currently done in rds_cmsg_rdma_args().

[1] WARNING: mm/page_alloc.c:5011
[..]
Call Trace:
 alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267
 alloc_pages include/linux/gfp.h:547 [inline]
 kmalloc_order+0x2e/0xb0 mm/slab_common.c:837
 kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853
 kmalloc_array include/linux/slab.h:592 [inline]
 kcalloc include/linux/slab.h:621 [inline]
 rds_rdma_extra_size+0xb2/0x3b0 net/rds/rdma.c:568
 rds_rm_size net/rds/send.c:928 [inline]

Reported-by: syzbot+1bd2b07f93745fa38425@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/20210201203233.1324704-1-snovitoll@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Last TCAM data contains TCAM enable bit.
It should be written after SRAM data before entry enabled.

Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1612172139-28343-1-git-send-email-stefanc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When sending a packet, we will prepend it with an LAPB header.
This modifies the shared parts of a cloned skb, so we should copy the
skb rather than just clone it, before we prepend the header.

In "Documentation/networking/driver.rst" (the 2nd point), it states
that drivers shouldn't modify the shared parts of a cloned skb when
transmitting.

The "dev_queue_xmit_nit" function in "net/core/dev.c", which is called
when an skb is being sent, clones the skb and sents the clone to
AF_PACKET sockets. Because the LAPB drivers first remove a 1-byte
pseudo-header before handing over the skb to us, if we don't copy the
skb before prepending the LAPB header, the first byte of the packets
received on AF_PACKET sockets can be corrupted.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20210201055706.415842-1-xie.he.0141@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mac80211-for-net-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Two fixes:
 - station rate tables were not updated correctly
   after association, leading to bad configuration
 - rtl8723bs (staging) was initializing data incorrectly
   after the previous fix and needed to move the init
   later

* tag 'mac80211-for-net-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
  staging: rtl8723bs: Move wiphy setup to after reading the regulatory settings from the chip
  mac80211: fix station rate table updates on assoc
====================

Link: https://lore.kernel.org/r/20210202143505.37610-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In case of failure in tc update skb the packet is dropped
without freeing the skb.

Fixed by freeing the skb in case failure in tc update skb.

Fixes: d6d27782 ("net/mlx5: E-Switch, Restore chain id on miss")
Fixes: c7569097 ("net/mlx5e: Add tc chains offload support for nic flows")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

max_opened_tc is used for stats, so that potentially non-zero stats
won't disappear when num_tc decreases. However, mlx5e_setup_tc_mqprio
fails to update it in the flow where channels are closed.

This commit fixes it. The new value of priv->channels.params.num_tc is
always checked on exit. In case of errors it will just be the old value,
and in case of success it will be the updated value.

Fixes: 05909bab ("net/mlx5e: Avoid reset netdev stats on configuration changes")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When creation of a new rule that requires allocation of an FTE fails,
need to call to tree_put_node on the FTE in order to release its'
resource.

Fixes: cefc2355 ("net/mlx5: Fix FTE cleanup")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>