- 06 Aug, 2015 8 commits
-
-
Alex Deucher authored
commit fd99a094 upstream. Use the correct flags for atom. v2: handle DRM_MODE_FLAG_DBLCLK Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Baruch Siach authored
commit 838d030b upstream. The callback function signature has changed in commit a5818a8b (pinctrl: get_group_pins() const fixes) Fixes: a5818a8b ('pinctrl: get_group_pins() const fixes') Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 1915a718 upstream. The return value of power_supply_register() call was not checked and even on error probe() function returned 0. If registering failed then during unbind the driver tried to unregister power supply which was not actually registered. This could lead to memory corruption because power_supply_unregister() unconditionally cleans up given power supply. Fix this by checking return status of power_supply_register() call. In case of failure, clean up sysfs entries and fail the probe. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 9be0fcb5 ("compal-laptop: add JHL90, battery & hwmon interface") Signed-off-by:
Sebastian Reichel <sre@kernel.org> [bwh: Backported to 3.2: insert the appropriate cleanup code as there is no common 'remove' label] Signed-off-by:
-
Felipe Balbi authored
commit e3c93e1a upstream. As per Mentor Graphics' documentation, we should always handle TX endpoints before RX endpoints. This patch fixes that error while also updating some hard-to-read comments which were scattered around musb_interrupt(). This patch should be backported as far back as possible since this error has been in the driver since it's conception. Signed-off-by:
Felipe Balbi <balbi@ti.com> [bwh: Backported to 3.2: adjust context, indentation] Signed-off-by:
-
Ekaterina Tumanova authored
commit b75f4c9a upstream. s390 documentation requires words 0 and 10-15 to be reserved and stored as zeros. As we fill out all other fields, we can memset the full structure. Signed-off-by:
Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Sabrina Dubroca authored
commit 08e83316 upstream. There is a race condition between e1000_change_mtu's cleanups and netpoll, when we change the MTU across jumbo size: Changing MTU frees all the rx buffers: e1000_change_mtu -> e1000_down -> e1000_clean_all_rx_rings -> e1000_clean_rx_ring Then, close to the end of e1000_change_mtu: pr_info -> ... -> netpoll_poll_dev -> e1000_clean -> e1000_clean_rx_irq -> e1000_alloc_rx_buffers -> e1000_alloc_frag And when we come back to do the rest of the MTU change: e1000_up -> e1000_configure -> e1000_configure_rx -> e1000_alloc_jumbo_rx_buffers alloc_jumbo finds the buffers already != NULL, since data (shared with page in e1000_rx_buffer->rxbuf) has been re-alloc'd, but it's garbage, or at least not what is expected when in jumbo state. This results in an unusable adapter (packets don't get through), and a NULL pointer dereference on the next call to e1000_clean_rx_ring (other mtu change, link down, shutdown): BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81194d6e>] put_compound_page+0x7e/0x330 [...] Call Trace: [<ffffffff81195445>] put_page+0x55/0x60 [<ffffffff815d9f44>] e1000_clean_rx_ring+0x134/0x200 [<ffffffff815da055>] e1000_clean_all_rx_rings+0x45/0x60 [<ffffffff815df5e0>] e1000_down+0x1c0/0x1d0 [<ffffffff811e2260>] ? deactivate_slab+0x7f0/0x840 [<ffffffff815e21bc>] e1000_change_mtu+0xdc/0x170 [<ffffffff81647050>] dev_set_mtu+0xa0/0x140 [<ffffffff81664218>] do_setlink+0x218/0xac0 [<ffffffff814459e9>] ? nla_parse+0xb9/0x120 [<ffffffff816652d0>] rtnl_newlink+0x6d0/0x890 [<ffffffff8104f000>] ? kvm_clock_read+0x20/0x40 [<ffffffff810a2068>] ? sched_clock_cpu+0xa8/0x100 [<ffffffff81663802>] rtnetlink_rcv_msg+0x92/0x260 By setting the allocator to a dummy version, netpoll can't mess up our rx buffers. The allocator is set back to a sane value in e1000_configure_rx. Fixes: edbbb3ca ("e1000: implement jumbo receive with partial descriptors") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 40384e4b upstream. Correctly rollback state if the failure occurs after we have handed over the ownership of the buffer to the host. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Alexander Ploumistos authored
commit 2eeff0b4 upstream. Add 04f2:aff1 to ath3k.c supported devices list and btusb.c blacklist, so that the device can load the ath3k firmware and re-enumerate itself as an AR3011 device. T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04f2 ProdID=aff1 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Alexander Ploumistos <alexpl@fedoraproject.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
- 09 May, 2015 32 commits
-
-
Ben Hutchings authored
-
Ben Hutchings authored
This reverts commit 823f1402, which was commit 2dca485f upstream. It depends on functionality that is not present in 3.2.y. Signed-off-by:
-
Dan Carpenter authored
commit 3b05ac38 upstream. The app_tcp_pkt_out() function expects "*diff" to be set and ends up using uninitialized data if CONFIG_IP_VS_IPV6 is turned on. The same issue is there in app_tcp_pkt_in(). Thanks to Julian Anastasov for noticing that. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Julian Anastasov authored
commit 579eb62a upstream. commit f5a41847 ("ipvs: move ip_route_me_harder for ICMP") from 2.6.37 introduced ip_route_me_harder() call for responses to local clients, so that we can provide valid rt_src after SNAT. It was used by TCP to provide valid daddr for ip_send_reply(). After commit 0a5ebb80 ("ipv4: Pass explicit daddr arg to ip_send_reply()." from 3.0 this rerouting is not needed anymore and should be avoided, especially in LOCAL_IN. Fixes 3.12.33 crash in xfrm reported by Florian Wiessner: "3.12.33 - BUG xfrm_selector_match+0x25/0x2f6" Reported-by:
Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de> Tested-by:
-
Eli Cohen authored
commit 377b5134 upstream. Clear the reserved field of struct ib_uverbs_async_event_desc which is copied to user space. Signed-off-by:
Eli Cohen <eli@mellanox.com> Reviewed-by:
Yann Droneaud <ydroneaud@opteya.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Ian Abbott authored
commit f20fbaad upstream. `spidev_message()` sums the lengths of the individual SPI transfers to determine the overall SPI message length. It restricts the total length, returning an error if too long, but it does not check for arithmetic overflow. For example, if the SPI message consisted of two transfers and the first has a length of 10 and the second has a length of (__u32)(-1), the total length would be seen as 9, even though the second transfer is actually very long. If the second transfer specifies a null `rx_buf` and a non-null `tx_buf`, the `copy_from_user()` could overrun the spidev's pre-allocated tx buffer before it reaches an invalid user memory address. Fix it by checking that neither the total nor the individual transfer lengths exceed the maximum allowed value. Thanks to Dan Carpenter for reporting the potential integer overflow. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Mark Brown <broonie@kernel.org> [Ian Abbott: Note: original commit compares the lengths to INT_MAX instead of bufsiz due to changes in earlier commits.] Signed-off-by:
-
Florian Westphal authored
commit 330966e5 upstream. skb_gso_segment has three possible return values: 1. a pointer to the first segmented skb 2. an errno value (IS_ERR()) 3. NULL. This can happen when GSO is used for header verification. However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL and would oops when NULL is returned. Note that these call sites should never actually see such a NULL return value; all callers mask out the GSO bits in the feature argument. However, there have been issues with some protocol handlers erronously not respecting the specified feature mask in some cases. It is preferable to get 'have to turn off hw offloading, else slow' reports rather than 'kernel crashes'. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net> [Brad Spengler: backported to 3.2] Signed-off-by:
Brad Spengler <spender@grsecurity.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 845704a5 ] Presence of an unbound loop in tcp_send_fin() had always been hard to explain when analyzing crash dumps involving gigantic dying processes with millions of sockets. Lets try a different strategy : In case of memory pressure, try to add the FIN flag to last packet in write queue, even if packet was already sent. TCP stack will be able to deliver this FIN after a timeout event. Note that this FIN being delivered by a retransmit, it also carries a Push flag given our current implementation. By checking sk_under_memory_pressure(), we anticipate that cooking many FIN packets might deplete tcp memory. In the case we could not allocate a packet, even with __GFP_WAIT allocation, then not sending a FIN seems quite reasonable if it allows to get rid of this socket, free memory, and not block the process from eventually doing other useful work. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Sebastian Pöhn authored
[ Upstream commit 2ab95749 ] Initial discussion was: [FYI] xfrm: Don't lookup sk_policy for timewait sockets Forwarded frames should not have a socket attached. Especially tw sockets will lead to panics later-on in the stack. This was observed with TPROXY assigning a tw socket and broken policy routing (misconfigured). As a result frame enters forwarding path instead of input. We cannot solve this in TPROXY as it cannot know that policy routing is broken. v2: Remove useless comment Signed-off-by:
Sebastian Poehn <sebastian.poehn@gmail.com> Signed-off-by:
-
Eric W. Biederman authored
commit c9974ad4 upstream. netpoll can call functions in hard irq context that are ordinarily called in lesser contexts. For those functions use dev_kfree_skb_any and dev_consume_skb_any so skbs are freed safely from hard irq context. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit d8ec2c02 upstream. Replace free_skb with dev_kfree_skb_any in be_tx_compl_process as which can be called in hard irq by netpoll, softirq context by normal napi polling, and in normal sleepable context by the network device close method. Signed-off-by:
-
Eric W. Biederman authored
commit f7e79913 upstream. Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by:
-
Eric W. Biederman authored
commit 497a27b9 upstream. Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by:
-
Eric W. Biederman authored
commit 989c9ba1 upstream. Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by:
-
Eric W. Biederman authored
commit a2ccd2e4 upstream. Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by:
-
Eric W. Biederman authored
commit 508f81d5 upstream. Replace kfree_skb with dev_kfree_skb_any in cp_start_xmit as it can be called in both hard irq and other contexts. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 355a901e ] While working on sk_forward_alloc problems reported by Denys Fedoryshchenko, we found that tcp connect() (and fastopen) do not call sk_wmem_schedule() for SYN packet (and/or SYN/DATA packet), so sk_forward_alloc is negative while connect is in progress. We can fix this by calling regular sk_stream_alloc_skb() both for the SYN packet (in tcp_connect()) and the syn_data packet in tcp_send_syn_data() Then, tcp_send_syn_data() can avoid copying syn_data as we simply can manipulate syn_data->cb[] to remove SYN flag (and increment seq) Instead of open coding memcpy_fromiovecend(), simply use this helper. This leaves in socket write queue clean fast clone skbs. This was tested against our fastopen packetdrill tests. Reported-by:
Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit 7d985ed1 ] [I would really like an ACK on that one from dhowells; it appears to be quite straightforward, but...] MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit in there. It gets passed via flags; in fact, another such check in the same function is done correctly - as flags & MSG_PEEK. It had been that way (effectively disabled) for 8 years, though, so the patch needs beating up - that case had never been tested. If it is correct, it's -stable fodder. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
[ Upstream commit 3eeff778 ] It should be checking flags, not msg->msg_flags. It's ->sendmsg() instances that need to look for that in ->msg_flags, ->recvmsg() ones (including the other ->recvmsg() instance in that file, as well as unix_dgram_recvmsg() this one claims to be imitating) check in flags. Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC in receive") back in 2010, so it goes quite a while back. Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit f862e07c ] The rds_iw_update_cm_id function stores a large 'struct rds_sock' object on the stack in order to pass a pair of addresses. This happens to just fit withint the 1024 byte stack size warning limit on x86, but just exceed that limit on ARM, which gives us this warning: net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] As the use of this large variable is basically bogus, we can rearrange the code to not do that. Instead of passing an rds socket into rds_iw_get_device, we now just pass the two addresses that we have available in rds_iw_update_cm_id, and we change rds_iw_get_mr accordingly, to create two address structures on the stack there. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Alexey Kodanev authored
[ Upstream commit b1cb59cf ] sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be set to incorrect values. Given that 'struct sk_buff' allocates from rcvbuf, incorrectly set buffer length could result to memory allocation failures. For example, set them as follows: # sysctl net.core.rmem_default=64 net.core.wmem_default = 64 # sysctl net.core.wmem_default=64 net.core.wmem_default = 64 # ping localhost -s 1024 -i 0 > /dev/null This could result to the following failure: skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32 head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:<NULL> kernel BUG at net/core/skbuff.c:102! invalid opcode: 0000 [#1] SMP ... task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000 RIP: 0010:[<ffffffff8155fbd1>] [<ffffffff8155fbd1>] skb_put+0xa1/0xb0 RSP: 0018:ffff88003ae8bc68 EFLAGS: 00010296 RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000 RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8 RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900 FS: 00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0 Stack: ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00 Call Trace: [<ffffffff81628db4>] unix_stream_sendmsg+0x2c4/0x470 [<ffffffff81556f56>] sock_write_iter+0x146/0x160 [<ffffffff811d9612>] new_sync_write+0x92/0xd0 [<ffffffff811d9cd6>] vfs_write+0xd6/0x180 [<ffffffff811da499>] SyS_write+0x59/0xd0 [<ffffffff81651532>] system_call_fastpath+0x12/0x17 Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00 00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 RIP [<ffffffff8155fbd1>] skb_put+0xa1/0xb0 RSP <ffff88003ae8bc68> Kernel panic - not syncing: Fatal exception Moreover, the possible minimum is 1, so we can get another kernel panic: ... BUG: unable to handle kernel paging request at ffff88013caee5c0 IP: [<ffffffff815604cf>] __alloc_skb+0x12f/0x1f0 ... Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
-
bingtian.ly@taobao.com authored
commit cdda8891 upstream. I found if we write a larger than 4GB value to some sysctl variables, the sending syscall will hang up forever, because these variables are 32 bits, such large values make them overflow to 0 or negative. This patch try to fix overflow or prevent from zero value setup of below sysctl variables: net.core.wmem_default net.core.rmem_default net.core.rmem_max net.core.wmem_max net.ipv4.udp_rmem_min net.ipv4.udp_wmem_min net.ipv4.tcp_wmem net.ipv4.tcp_rmem Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Li Yu <raise.sail@gmail.com> Signed-off-by:
-
Lorenzo Colitti authored
[ Upstream commit 9145736d ] 1. For an IPv4 ping socket, ping_check_bind_addr does not check the family of the socket address that's passed in. Instead, make it behave like inet_bind, which enforces either that the address family is AF_INET, or that the family is AF_UNSPEC and the address is 0.0.0.0. 2. For an IPv6 ping socket, ping_check_bind_addr returns EINVAL if the socket family is not AF_INET6. Return EAFNOSUPPORT instead, for consistency with inet6_bind. 3. Make ping_v4_sendmsg and ping_v6_sendmsg return EAFNOSUPPORT instead of EINVAL if an incorrect socket address structure is passed in. 4. Make IPv6 ping sockets be IPv6-only. The code does not support IPv4, and it cannot easily be made to support IPv4 because the protocol numbers for ICMP and ICMPv6 are different. This makes connect(::ffff:192.0.2.1) fail with EAFNOSUPPORT instead of making the socket unusable. Among other things, this fixes an oops that can be triggered by: int s = socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP); struct sockaddr_in6 sin6 = { .sin6_family = AF_INET6, .sin6_addr = in6addr_any, }; bind(s, (struct sockaddr *) &sin6, sizeof(sin6)); Change-Id: If06ca86d9f1e4593c0d6df174caca3487c57a241 Signed-off-by:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
Michal Kubeček authored
[ Upstream commit acf8dd0a ] If an over-MTU UDP datagram is sent through a SOCK_RAW socket to a UFO-capable device, ip_ufo_append_data() sets skb->ip_summed to CHECKSUM_PARTIAL unconditionally as all GSO code assumes transport layer checksum is to be computed on segmentation. However, in this case, skb->csum_start and skb->csum_offset are never set as raw socket transmit path bypasses udp_send_skb() where they are usually set. As a result, driver may access invalid memory when trying to calculate the checksum and store the result (as observed in virtio_net driver). Moreover, the very idea of modifying the userspace provided UDP header is IMHO against raw socket semantics (I wasn't able to find a document clearly stating this or the opposite, though). And while allowing CHECKSUM_NONE in the UFO case would be more efficient, it would be a bit too intrusive change just to handle a corner case like this. Therefore disallowing UFO for packets from SOCK_DGRAM seems to be the best option. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Ben Shelton authored
[ Upstream commit 42c972a1 ] The National Instruments USB Host-to-Host Cable is based on the Prolific PL-25A1 chipset. Add its VID/PID so the plusb driver will recognize it. Signed-off-by:
Ben Shelton <ben.shelton@ni.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2f1d8b9e ] Brian reported crashes using IPv6 traffic with macvtap/veth combo. I tracked the crashes in neigh_hh_output() -> memcpy(skb->data - HH_DATA_MOD, hh->hh_data, HH_DATA_MOD); Neighbour code assumes headroom to push Ethernet header is at least 16 bytes. It appears macvtap has only 14 bytes available on arches where NET_IP_ALIGN is 0 (like x86) Effect is a corruption of 2 bytes right before skb->head, and possible crashes if accessing non existing memory. This fix should also increase IPv4 performance, as paranoid code in ip_finish_output2() wont have to call skb_realloc_headroom() Reported-by:
Brian Rak <brak@vultr.com> Tested-by:
-
Jason Wang authored
commit 16a3fa28 upstream. We currently use hdr_len as a hint of head length which is advertised by guest. But when guest advertise a very big value, it can lead to an 64K+ allocating of kmalloc() which has a very high possibility of failure when host memory is fragmented or under heavy stress. The huge hdr_len also reduce the effect of zerocopy or even disable if a gso skb is linearized in guest. To solves those issues, this patch introduces an upper limit (PAGE_SIZE) of the head, which guarantees an order 0 allocation each time. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Matthew Thode authored
[ Upstream commit a4176a93 ] colons are used as a separator in netdev device lookup in dev_ioctl.c Specific functions are SIOCGIFTXQLEN SIOCETHTOOL SIOCSIFNAME Signed-off-by:
Matthew Thode <mthode@mthode.org> Signed-off-by:
-
Ignacy Gawędzki authored
[ Upstream commit 34eea79e ] In tcf_em_validate(), after calling request_module() to load the kind-specific module, set em->ops to NULL before returning -EAGAIN, so that module_put() is not called again by tcf_em_tree_destroy(). Signed-off-by:
Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr> Acked-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
Alexander Drozdov authored
[ Upstream commit 3e32e733 ] ip_check_defrag() may be used by af_packet to defragment outgoing packets. skb_network_offset() of af_packet's outgoing packets is not zero. Signed-off-by:
Alexander Drozdov <al.drozdov@gmail.com> Signed-off-by:
-
Ignacy Gawędzki authored
[ Upstream commit 1c4cff0c ] The gnet_stats_copy_app() function gets called, more often than not, with its second argument a pointer to an automatic variable in the caller's stack. Therefore, to avoid copying garbage afterwards when calling gnet_stats_finish_copy(), this data is better copied to a dynamically allocated memory that gets freed after use. [xiyou.wangcong@gmail.com: remove a useless kfree()] Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 7afb8886 ] Ignacy reported that when eth0 is down and add a vlan device on top of it like: ip link add link eth0 name eth0.1 up type vlan id 1 We will get a refcount leak: unregister_netdevice: waiting for eth0.1 to become free. Usage count = 2 The problem is when rtnl_configure_link() fails in rtnl_newlink(), we simply call unregister_device(), but for stacked device like vlan, we almost do nothing when we unregister the upper device, more work is done when we unregister the lower device, so call its ->dellink(). Reported-by:
-
