Skip to content

L
linux
Switch branch/tag
  1. 05 Dec, 2022 2 commits
  3. 01 Dec, 2022 7 commits
  5. 30 Nov, 2022 1 commit
    • Takashi Sakamoto's avatar
      ALSA: dice: add support for Focusrite Saffire Pro 40 with TCD3070 ASIC · 2133dc91
      Takashi Sakamoto authored 
      TC Applied Technologies (TCAT) produces TCD3070 as final DICE ASIC for
communication in IEEE 1394 bus for IEC 61883-1/6 protocol. As long as I
know, latter model of Focusrite Saffire Pro 40 is an application of the
ASIC and only in the market for consumers.

This patchset adds support for the device. The device has several
remarkable points.

1. No support for extended synchronization information section in TCAT
general protocol. The value of GLOBAL_EXTENDED_STATUS register is always
zero. Additionally, NOTIFY_EXT_STATUS message is never emitted.

2. No support for TCAT protocol extension. Hard coding is required for
format of CIP payload.

3. During several seconds after changing sampling rate, the block to
process PCM frames is under disfunction. When starting packet streaming
during the state, the block is never function till configuring different
sampling rate and several seconds.

This commit adds support for the device. The item 1 and 2 can be
adaptable, while item 3 is not. It's not preferable that user process
is forced to sleep during the disfunction in the call of ioctl(2) with
SNDRV_PCM_IOCTL_HW_PARAMS or SNDRV_PCM_IOCTL_PREPARE request. It's
inconvenient but let user configure preferable sampling rate in advance
of starting PCM substream.

The content of configuration ROM in the device I used is available at:
 * https://github.com/takaswie/am-config-roms/

I note that any mixer control operation is implemented by unique
transaction. The frame of request consists of 16 bytes header followed
by payload.

header (4 quadlets):
1st: the type of request, prefixed with 0x8000
2nd: counter at 2 bytes in MSB side, the length of data at 2 bytes in LSB
     side
3rd: parameter 0
4th: parameter 1

payload (variable length if need):
5th-: data according to parameters

The request frame is sent by block write request to 0x'ffff'e040'01c0.

The frame of response is similar to the frame of request, but it is
header only, thus fixed to 16 bytes. The response frame is sent to the
address which is registered by lock transaction to 0x'ffff'e040'0008.

If the operation results in batch of data, the 2nd quadlet of header
includes the length of data like request. The data is itself readable
by read block request to 0x'ffff'e040'0030, which includes both
header and payload for data, thus the length to read should be the
length of data plus 16 bytes for header

The actual value of request, parameter 0, parameter 1, and data is
unclear yet.
Signed-off-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20221130143313.43880-1-o-takashi@sakamocchi.jpSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      2133dc91
  7. 29 Nov, 2022 3 commits
  9. 28 Nov, 2022 2 commits
  11. 25 Nov, 2022 1 commit
  13. 23 Nov, 2022 2 commits
  15. 19 Nov, 2022 4 commits
  17. 16 Nov, 2022 4 commits
    • Jaroslav Kysela's avatar
      selftests: alsa - add PCM test · aba51cd0
      Jaroslav Kysela authored 
      This initial code does a simple sample transfer tests. By default,
all PCM devices are detected and tested with short and long
buffering parameters for 4 seconds. If the sample transfer timing
is not in a +-100ms boundary, the test fails. Only the interleaved
buffering scheme is supported in this version.

The configuration may be modified with the configuration files.
A specific hardware configuration is detected and activated
using the sysfs regex matching. This allows to use the DMI string
(/sys/class/dmi/id/* tree) or any other system parameters
exposed in sysfs for the matching for the CI automation.

The configuration file may also specify the PCM device list to detect
the missing PCM devices.

v1..v2:
  - added missing alsa-local.h header file

Cc: Mark Brown <broonie@kernel.org>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Cc: Liam Girdwood <liam.r.girdwood@intel.com>
Cc: Jesse Barnes <jsbarnes@google.com>
Cc: Jimmy Cheng-Yi Chiang <cychiang@google.com>
Cc: Curtis Malainey <cujomalainey@google.com>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: default avatarJaroslav Kysela <perex@perex.cz>
Reviewed-by: default avatarMark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221108115914.3751090-1-perex@perex.czSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      aba51cd0
    • Kuninori Morimoto's avatar
      ALSA: pcm: avoid nused-but-set-variable warning · 3827597a
      Kuninori Morimoto authored 
      It will indicate below warning if W=1 was added and CONFIG_SND_DEBUG
was not set. This patch adds __maybe_unused and avoid it.

	${LINUX}/sound/core/pcm_native.c: In function 'constrain_mask_params':
	${LINUX}/sound/core/pcm_native.c:291:25: error: variable 'old_mask' set but not used [-Werror=unused-but-set-variable]
	  291 |         struct snd_mask old_mask;
	      |                         ^~~~~~~~
	${LINUX}/sound/core/pcm_native.c: In function 'constrain_interval_params':
	${LINUX}/sound/core/pcm_native.c:327:29: error: variable 'old_interval' set but not used [-Werror=unused-but-set-variable]
	  327 |         struct snd_interval old_interval;
	      |                             ^~~~~~~~~~~~
	${LINUX}/sound/core/pcm_native.c: In function 'constrain_params_by_rules':
	${LINUX}/sound/core/pcm_native.c:368:29: error: variable 'old_interval' set but not used [-Werror=unused-but-set-variable]
	  368 |         struct snd_interval old_interval;
	      |                             ^~~~~~~~~~~~
	${LINUX}/sound/core/pcm_native.c:367:25: error: variable 'old_mask' set but not used [-Werror=unused-but-set-variable]
	  367 |         struct snd_mask old_mask;
	      |                         ^~~~~~~~
	${LINUX}/sound/core/pcm_native.c: In function 'snd_pcm_hw_params_choose':
	${LINUX}/sound/core/pcm_native.c:652:29: error: variable 'old_interval' set but not used [-Werror=unused-but-set-variable]
	  652 |         struct snd_interval old_interval;
	      |                             ^~~~~~~~~~~~
	${LINUX}/sound/core/pcm_native.c:651:25: error: variable 'old_mask' set but not used [-Werror=unused-but-set-variable]
	  651 |         struct snd_mask old_mask;
	      |                         ^~~~~~~~
	cc1: all warnings being treated as errors
	make[3]: *** [${LINUX}/scripts/Makefile.build:250: sound/core/pcm_native.o] error 1
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/874juzg3kd.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      3827597a
    • Takashi Iwai's avatar
      ALSA: memalloc: Allocate more contiguous pages for fallback case · cc265163
      Takashi Iwai authored 
      Currently the fallback SG allocation tries to allocate each single
page, and this tends to result in the reverse order of memory
addresses when large space is available at boot, as the kernel takes a
free page from the top to the bottom in the zone.  The end result
looks as if non-contiguous (although it actually is).  What's worse is
that it leads to an overflow of BDL entries for HD-audio.

For avoiding such a problem, this patch modifies the allocation code
slightly; now it tries to allocate the larger contiguous chunks as
much as possible, then reduces to the smaller chunks only if the
allocation failed -- a similar strategy as the existing
snd_dma_alloc_pages_fallback() function.

Along with the trick, drop the unused address array from
snd_dma_sg_fallback object.  It was needed in the past when
dma_alloc_coherent() was used, but with the standard page allocator,
it became superfluous and never referred.

Fixes: a8d302a0 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Reviewed-by: default avatarKai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221114141658.29620-1-tiwai@suse.deSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      cc265163
    • Takashi Iwai's avatar
      Merge branch 'for-linus' into for-next · d69d137e
      Takashi Iwai authored 
      Back-merge of devel branch for further fixes of memalloc helpers.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      d69d137e
  19. 15 Nov, 2022 2 commits
  21. 12 Nov, 2022 3 commits
  23. 10 Nov, 2022 4 commits
  25. 09 Nov, 2022 2 commits
  27. 08 Nov, 2022 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7