- 19 Jun, 2023 40 commits
-
-
Catalin Marinas authored
The sh architecture defines ARCH_DMA_MINALIGN in asm/page.h. Move it to asm/cache.h to allow a generic ARCH_DMA_MINALIGN definition in linux/cache.h without redefine errors/warnings. Link: https://lkml.kernel.org/r/20230613155245.1228274-4-catalin.marinas@arm.comSigned-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: kernel test robot <lkp@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Catalin Marinas authored
The microblaze architecture defines ARCH_DMA_MINALIGN in asm/page.h. Move it to asm/cache.h to allow a generic ARCH_DMA_MINALIGN definition in linux/cache.h without redefine errors/warnings. While at it, also move ARCH_SLAB_MINALIGN to asm/cache.h for consistency. Link: https://lkml.kernel.org/r/20230613155245.1228274-3-catalin.marinas@arm.comSigned-off-by:
-
Catalin Marinas authored
Patch series "Move the ARCH_DMA_MINALIGN definition to asm/cache.h". The ARCH_KMALLOC_MINALIGN reduction series defines a generic ARCH_DMA_MINALIGN in linux/cache.h: https://lore.kernel.org/r/20230612153201.554742-2-catalin.marinas@arm.com/ Unfortunately, this causes a duplicate definition warning for microblaze, powerpc (32-bit only) and sh as these architectures define ARCH_DMA_MINALIGN in a different file than asm/cache.h. Move the macro to asm/cache.h to avoid this issue and also bring them in line with the other architectures. This patch (of 3): The powerpc architecture defines ARCH_DMA_MINALIGN in asm/page_32.h and only if CONFIG_NOT_COHERENT_CACHE is enabled (32-bit platforms only). Move this macro to asm/cache.h to allow a generic ARCH_DMA_MINALIGN definition in linux/cache.h without redefine errors/warnings. Link: https://lkml.kernel.org/r/20230613155245.1228274-1-catalin.marinas@arm.com Link: https://lkml.kernel.org/r/20230613155245.1228274-2-catalin.marinas@arm.comSigned-off-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306131053.1ybvRRhO-lkp@intel.com/ Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Rich Felker <dalias@libc.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Catalin Marinas authored
With the DMA bouncing of unaligned kmalloc() buffers now in place, enable it for arm64 to allow the kmalloc-{8,16,32,48,96} caches. In addition, always create the swiotlb buffer even when the end of RAM is within the 32-bit physical address range (the swiotlb buffer can still be disabled on the kernel command line). Link: https://lkml.kernel.org/r/20230612153201.554742-18-catalin.marinas@arm.comSigned-off-by:Isaac J. Manjarres <isaacmanjarres@google.com> Cc: Will Deacon <will@kernel.org> Cc: Alasdair Kergon <agk@redhat.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Mike Snitzer <snitzer@kernel.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Saravana Kannan <saravanak@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Catalin Marinas authored
If an architecture opted in to DMA bouncing of unaligned kmalloc() buffers (ARCH_WANT_KMALLOC_DMA_BOUNCE), reduce the minimum kmalloc() cache alignment below cache-line size to ARCH_KMALLOC_MINALIGN. Link: https://lkml.kernel.org/r/20230612153201.554742-17-catalin.marinas@arm.comSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Tested-by:
-
Catalin Marinas authored
Similarly to the direct DMA, bounce small allocations as they may have originated from a kmalloc() cache not safe for DMA. Unlike the direct DMA, iommu_dma_map_sg() cannot call iommu_dma_map_sg_swiotlb() for all non-coherent devices as this would break some cases where the iova is expected to be contiguous (dmabuf). Instead, scan the scatterlist for any small sizes and only go the swiotlb path if any element of the list needs bouncing (note that iommu_dma_map_page() would still only bounce those buffers which are not DMA-aligned). To avoid scanning the scatterlist on the 'sync' operations, introduce an SG_DMA_SWIOTLB flag set by iommu_dma_map_sg_swiotlb(). The dev_use_swiotlb() function together with the newly added dev_use_sg_swiotlb() now check for both untrusted devices and unaligned kmalloc() buffers (suggested by Robin Murphy). Link: https://lkml.kernel.org/r/20230612153201.554742-16-catalin.marinas@arm.comSigned-off-by:
Robin Murphy <robin.murphy@arm.com> Tested-by:
-
Catalin Marinas authored
For direct DMA, if the size is small enough to have originated from a kmalloc() cache below ARCH_DMA_MINALIGN, check its alignment against dma_get_cache_alignment() and bounce if necessary. For larger sizes, it is the responsibility of the DMA API caller to ensure proper alignment. At this point, the kmalloc() caches are properly aligned but this will change in a subsequent patch. Architectures can opt in by selecting DMA_BOUNCE_UNALIGNED_KMALLOC. Link: https://lkml.kernel.org/r/20230612153201.554742-15-catalin.marinas@arm.comSigned-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Robin Murphy authored
sg_is_dma_bus_address() is inconsistent with the naming pattern of its corresponding setters and its own kerneldoc, so take the majority vote and rename it sg_dma_is_bus_address() (and fix up the missing underscores in the kerneldoc too). This gives us a nice clear pattern where SG DMA flags are SG_DMA_<NAME>, and the helpers for acting on them are sg_dma_<action>_<name>(). Link: https://lkml.kernel.org/r/20230612153201.554742-14-catalin.marinas@arm.comSigned-off-by:
Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by:
Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/fa2eca2862c7ffc41b50337abffb2dfd2864d3ea.1685036694.git.robin.murphy@arm.comTested-by:
-
Robin Murphy authored
The DMA flags field will be useful for users beyond PCI P2P, so upgrade to its own dedicated config option. [catalin.marinas@arm.com: use #ifdef CONFIG_NEED_SG_DMA_FLAGS in scatterlist.h] [catalin.marinas@arm.com: update PCI_P2PDMA dma_flags comment in scatterlist.h] Link: https://lkml.kernel.org/r/20230612153201.554742-13-catalin.marinas@arm.comSigned-off-by:
-
Catalin Marinas authored
On arm64, ARCH_DMA_MINALIGN is 128, larger than the cache line size on most of the current platforms (typically 64). Define ARCH_KMALLOC_MINALIGN to 8 (the default for architectures without their own ARCH_DMA_MINALIGN) and override dma_get_cache_alignment() to return cache_line_size(), probed at run-time. The kmalloc() caches will be limited to the cache line size. This will allow the additional kmalloc-{64,192} caches on most arm64 platforms. Link: https://lkml.kernel.org/r/20230612153201.554742-12-catalin.marinas@arm.comSigned-off-by: -
Catalin Marinas authored
ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations while ARCH_KMALLOC_MINALIGN is the minimum kmalloc() objects alignment. Link: https://lkml.kernel.org/r/20230612153201.554742-11-catalin.marinas@arm.comSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by:
-
Catalin Marinas authored
ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations while ARCH_KMALLOC_MINALIGN is the minimum kmalloc() objects alignment. Link: https://lkml.kernel.org/r/20230612153201.554742-10-catalin.marinas@arm.comSigned-off-by:
-
Catalin Marinas authored
ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations while ARCH_KMALLOC_MINALIGN is the minimum kmalloc() objects alignment. Link: https://lkml.kernel.org/r/20230612153201.554742-9-catalin.marinas@arm.comSigned-off-by:
Mark Brown <broonie@kernel.org> Tested-by:
-
Catalin Marinas authored
ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations while ARCH_KMALLOC_MINALIGN is the minimum kmalloc() objects alignment. Link: https://lkml.kernel.org/r/20230612153201.554742-8-catalin.marinas@arm.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by:
-
Catalin Marinas authored
ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations while ARCH_KMALLOC_MINALIGN is the minimum kmalloc() objects alignment. Link: https://lkml.kernel.org/r/20230612153201.554742-7-catalin.marinas@arm.comSigned-off-by:
-
Catalin Marinas authored
ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations while ARCH_KMALLOC_MINALIGN is the minimum kmalloc() objects alignment. Link: https://lkml.kernel.org/r/20230612153201.554742-6-catalin.marinas@arm.comSigned-off-by:
-
Catalin Marinas authored
Do not create kmalloc() caches which are not aligned to dma_get_cache_alignment(). There is no functional change since for current architectures defining ARCH_DMA_MINALIGN, ARCH_KMALLOC_MINALIGN equals ARCH_DMA_MINALIGN (and dma_get_cache_alignment()). On architectures without a specific ARCH_DMA_MINALIGN, dma_get_cache_alignment() is 1, so no change to the kmalloc() caches. Link: https://lkml.kernel.org/r/20230612153201.554742-5-catalin.marinas@arm.comSigned-off-by:
-
Catalin Marinas authored
In the slab variant of kmem_cache_init(), call new_kmalloc_cache() instead of initialising the kmalloc_caches array directly. With this, create_kmalloc_cache() is now only called from new_kmalloc_cache() in the same file, so make it static. In addition, the useroffset argument is always 0 while usersize is the same as size. Remove them. Link: https://lkml.kernel.org/r/20230612153201.554742-4-catalin.marinas@arm.comSigned-off-by:
-
Catalin Marinas authored
On arm64, ARCH_DMA_MINALIGN is larger than most cache line size configurations deployed. Allow an architecture to override dma_get_cache_alignment() in order to return a run-time probed value (e.g. cache_line_size()). Link: https://lkml.kernel.org/r/20230612153201.554742-3-catalin.marinas@arm.comSigned-off-by:
-
Catalin Marinas authored
Patch series "mm, dma, arm64: Reduce ARCH_KMALLOC_MINALIGN to 8", v7. A series reducing the kmalloc() minimum alignment on arm64 to 8 (from 128). This patch (of 17): In preparation for supporting a kmalloc() minimum alignment smaller than the arch DMA alignment, decouple the two definitions. This requires that either the kmalloc() caches are aligned to a (run-time) cache-line size or the DMA API bounces unaligned kmalloc() allocations. Subsequent patches will implement both options. After this patch, ARCH_DMA_MINALIGN is expected to be used in static alignment annotations and defined by an architecture to be the maximum alignment for all supported configurations/SoCs in a single Image. Architectures opting in to a smaller ARCH_KMALLOC_MINALIGN will need to define its value in the arch headers. Since ARCH_DMA_MINALIGN is now always defined, adjust the #ifdef in dma_get_cache_alignment() so that there is no change for architectures not requiring a minimum DMA alignment. Link: https://lkml.kernel.org/r/20230612153201.554742-1-catalin.marinas@arm.com Link: https://lkml.kernel.org/r/20230612153201.554742-2-catalin.marinas@arm.comSigned-off-by:
-
Peter Xu authored
Huge pmd sharing operates on PUD not PMD, huge_pte_lock() is not suitable in this case because it should only work for last level pte changes, while pmd sharing is always one level higher. Meanwhile, here we're locking over the spte pgtable lock which is even not a lock for current mm but someone else's. It seems even racy on operating on the lock, as after put_page() of the spte pgtable page logically the page can be released, so at least the spin_unlock() needs to be done after the put_page(). No report I am aware, I'm not even sure whether it'll just work on taking the spte pmd lock, because while we're holding i_mmap read lock it probably means the vma interval tree is frozen, all pte allocators over this pud entry could always find the specific svma and spte page, so maybe they'll serialize on this spte page lock? Even so, doesn't seem to be expected. It just seems to be an accident of cb900f41. Fix it with the proper pud lock (which is the mm's page_table_lock). Link: https://lkml.kernel.org/r/20230612160420.809818-1-peterx@redhat.com Fixes: cb900f41 ("mm, hugetlb: convert hugetlbfs to use split pmd lock") Signed-off-by:
Peter Xu <peterx@redhat.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by:
-
Sidhartha Kumar authored
All users can use the folio equivalent so this function can be safely removed. Link: https://lkml.kernel.org/r/20230612163405.99345-1-sidhartha.kumar@oracle.comSigned-off-by:
Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tarun Sahu <tsahu@linux.ibm.com> Signed-off-by:
-
Hugh Dickins authored
In rare transient cases, not yet made possible, pte_offset_map() and pte_offet_map_lock() may not find a page table: handle appropriately. [hughd@google.com: __wp_page_copy_user(): don't call update_mmu_tlb() with NULL] Link: https://lkml.kernel.org/r/1a4db221-7872-3594-57ce-42369945ec8d@google.com Link: https://lkml.kernel.org/r/a194441b-63f3-adb6-5964-7ca3171ae7c2@google.comSigned-off-by:
Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by:
-
Hugh Dickins authored
swap_vma_readahead() has been proceeding in an unconventional way, its preliminary swap_ra_info() doing the pte_offset_map() and pte_unmap(), then relying on that pte pointer even after the pte_unmap() - in its CONFIG_64BIT case (I think !CONFIG_HIGHPTE was intended; whereas 32-bit copied ptes to stack while they were mapped, but had to limit how many). Though it would be difficult to construct a failing testcase, accessing page table after pte_unmap() will become bad practice, even on 64-bit: an rcu_read_unlock() in pte_unmap() will allow page table to be freed. Move relevant definitions from include/linux/swap.h to mm/swap_state.c, nothing else used them. Delete the CONFIG_64BIT distinction and buffer, delete all reference to ptes from swap_ra_info(), use pte_offset_map() repeatedly in swap_vma_readahead(), breaking from the loop if it fails. (Will the repeated "map" and "unmap" show up as a slowdown anywhere? If so, maybe modify __read_swap_cache_async() to do the pte_unmap() only when it does not find the page already in the swapcache.) Use ptep_get_lockless(), mainly for its READ_ONCE(). Correctly advance the address passed down to each call of __read__swap_cache_async(). Link: https://lkml.kernel.org/r/b7c64ab3-9e44-aac0-d2b-c57de578af1c@google.comSigned-off-by:
"Huang, Ying" <ying.huang@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by:
-
Hugh Dickins authored
Delete pmd_trans_unstable, pmd_none_or_trans_huge_or_clear_bad() and pmd_devmap_trans_unstable(), all now unused. With mixed feelings, delete all the comments on pmd_trans_unstable(). That was very good documentation of a subtle state, and this series does not even eliminate that state: but rather, normalizes and extends it, asking pte_offset_map[_lock]() callers to anticipate failure, without regard for whether mmap_read_lock() or mmap_write_lock() is held. Retain pud_trans_unstable(), which has one use in __handle_mm_fault(), but delete its equivalent pud_none_or_trans_huge_or_dev_or_clear_bad(). While there, move the default arch_needs_pgtable_deposit() definition up near where pgtable_trans_huge_deposit() and withdraw() are declared. Link: https://lkml.kernel.org/r/5abdab3-3136-b42e-274d-9c6281bfb79@google.comSigned-off-by:
-
Hugh Dickins authored
handle_pte_fault() use pte_offset_map_nolock() to get the vmf.ptl which corresponds to vmf.pte, instead of pte_lockptr() being used later, when there's a chance that the pmd entry might have changed, perhaps to none, or to a huge pmd, with no split ptlock in its struct page. Remove its pmd_devmap_trans_unstable() call: pte_offset_map_nolock() will handle that case by failing. Update the "morph" comment above, looking forward to when shmem or file collapse to THP may not take mmap_lock for write (or not at all). do_numa_page() use the vmf->ptl from handle_pte_fault() at first, but refresh it when refreshing vmf->pte. do_swap_page()'s pte_unmap_same() (the thing that takes ptl to verify a two-part PAE orig_pte) use the vmf->ptl from handle_pte_fault() too; but do_swap_page() is also used by anon THP's __collapse_huge_page_swapin(), so adjust that to set vmf->ptl by pte_offset_map_nolock(). Link: https://lkml.kernel.org/r/c1107654-3929-60ac-223e-6877cbb86065@google.comSigned-off-by:
-
Hugh Dickins authored
copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.comSigned-off-by:
-
Hugh Dickins authored
__collapse_huge_page_swapin(): don't drop the map after every pte, it only has to be dropped by do_swap_page(); give up if pte_offset_map() fails; trace_mm_collapse_huge_page_swapin() at the end, with result; fix comment on returned result; fix vmf.pgoff, though it's not used. collapse_huge_page(): use pte_offset_map_lock() on the _pmd returned from clearing; allow failure, but it should be impossible there. hpage_collapse_scan_pmd() and collapse_pte_mapped_thp() allow for pte_offset_map_lock() failure. Link: https://lkml.kernel.org/r/6513e85-d798-34ec-3762-7c24ffb9329@google.comSigned-off-by:
Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by:
-
Hugh Dickins authored
__split_huge_zero_page_pmd() use a single pte_offset_map() to sweep the extent: it's already under pmd_lock(), so this is no worse for latency; and since it's supposed to have full control of the just-withdrawn page table, here choose to VM_BUG_ON if it were to fail. And please don't increment haddr by PAGE_SIZE, that should remain huge aligned: declare a separate addr (not a bugfix, but it was deceptive). __split_huge_pmd_locked() likewise (but it had declared a separate addr); and change its BUG_ON(!pte_none) to VM_BUG_ON, for consistency with zero (those deposited page tables are sometimes victims of random corruption). Link: https://lkml.kernel.org/r/90cbed7f-90d9-b779-4a46-d2485baf9595@google.comSigned-off-by:
-
Hugh Dickins authored
There is now no reason for follow_pmd_mask()'s FOLL_SPLIT_PMD block to distinguish huge_zero_page from a normal THP: follow_page_pte() handles any instability, and here it's a good idea to replace any pmd_none(*pmd) by a page table a.s.a.p, in the huge_zero_page case as for a normal THP; and this removes an unnecessary possibility of -EBUSY failure. (Hmm, couldn't the normal THP case have hit an unstably refaulted THP before? But there are only two, exceptional, users of FOLL_SPLIT_PMD.) Link: https://lkml.kernel.org/r/59fd15dd-4d39-5ec-2043-1d5117f7f85@google.comSigned-off-by:
-
Hugh Dickins authored
migrate_vma_collect_pmd(): remove the pmd_trans_unstable() handling after splitting huge zero pmd, and the pmd_none() handling after successfully splitting huge page: those are now managed inside pte_offset_map_lock(), and by "goto again" when it fails. But the skip after unsuccessful split_huge_page() must stay: it avoids an endless loop. The skip when pmd_bad()? Remove that: it will be treated as a hole rather than a skip once cleared by pte_offset_map_lock(), but with different timing that would be so anyway; and it's arguably best to leave the pmd_bad() handling centralized there. migrate_vma_insert_page(): remove comment on the old pte_offset_map() and old locking limitations; remove the pmd_trans_unstable() check and just proceed to pte_offset_map_lock(), aborting when it fails (page has been charged to memcg, but as in other cases, it's uncharged when freed). Link: https://lkml.kernel.org/r/1131be62-2e84-da2f-8f45-807b2cbeeec5@google.comSigned-off-by:
Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by:
-
Hugh Dickins authored
MGLRU's walk_pte_range() use the safer pte_offset_map_nolock(), rather than pte_lockptr(), to get the ptl for its trylock. Just return false and move on to next extent if it fails, like when the trylock fails. Remove the VM_WARN_ON_ONCE(pmd_leaf) since that will happen, rarely. Link: https://lkml.kernel.org/r/51ece73e-7398-2e4a-2384-56708c87844f@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by:
-
Hugh Dickins authored
Adjust unuse_pte() and unuse_pte_range() to allow pte_offset_map_lock() and pte_offset_map() failure; remove pmd_none_or_trans_huge_or_clear_bad() from unuse_pmd_range() now that pte_offset_map() does all that itself. Link: https://lkml.kernel.org/r/c4d831-13c3-9dfd-70c2-64514ad951fd@google.comSigned-off-by:
-
Hugh Dickins authored
Some nearby MADV_WILLNEED cleanup unrelated to pte_offset_map_lock(). shmem_swapin_range() is a better name than force_shm_swapin_readahead(). Fix unimportant off-by-one on end_index. Call the swp_entry_t "entry" rather than "swap": either is okay, but entry is the name used elsewhere in mm/madvise.c. Do not assume GFP_HIGHUSER_MOVABLE: that's right for anon swap, but shmem should take gfp from mapping. Pass the actual vma and address to read_swap_cache_async(), in case a NUMA mempolicy applies. lru_add_drain() at outer level, like madvise_willneed()'s other branch. Link: https://lkml.kernel.org/r/67e18875-ffb3-ec27-346-f350e07bed87@google.comSigned-off-by:
-
Hugh Dickins authored
Came here to make madvise's several pte_offset_map_lock() scans advance to next extent on failure, and remove superfluous pmd_trans_unstable() and pmd_none_or_trans_huge_or_clear_bad() calls. But also did some nearby cleanup. swapin_walk_pmd_entry(): don't name an address "index"; don't drop the lock after every pte, only when calling out to read_swap_cache_async(). madvise_cold_or_pageout_pte_range() and madvise_free_pte_range(): prefer "start_pte" for pointer, orig_pte usually denotes a saved pte value; leave lazy MMU mode before unlocking; merge the success and failure paths after split_folio(). Link: https://lkml.kernel.org/r/cc4d9a88-9da6-362-50d9-6735c2b125c6@google.comSigned-off-by:
-
Hugh Dickins authored
move_ptes() return -EAGAIN if pte_offset_map_lock() of old fails, or if pte_offset_map_nolock() of new fails: move_page_tables() retry if so. But that does need a pmd_none() check inside, to stop endless loop when huge shmem is truncated (thank you to syzbot); and move_huge_pmd() must tolerate that a page table might have been allocated there just before (of course it would be more satisfying to remove the empty page table, but this is not a path worth optimizing). Link: https://lkml.kernel.org/r/65e5e84a-f04-947-23f2-b97d3462e1e@google.comSigned-off-by:
-
Hugh Dickins authored
change_pmd_range() had special pmd_none_or_clear_bad_unless_trans_huge(), required to avoid "bad" choices when setting automatic NUMA hinting under mmap_read_lock(); but most of that is already covered in pte_offset_map() now. change_pmd_range() just wants a pmd_none() check before wasting time on MMU notifiers, then checks on the read-once _pmd value to work out what's needed for huge cases. If change_pte_range() returns -EAGAIN to retry if pte_offset_map_lock() fails, nothing more special is needed. Link: https://lkml.kernel.org/r/725a42a9-91e9-c868-925-e3a5fd40bb4f@google.comSigned-off-by:
-
Hugh Dickins authored
Following the examples of nearby code, various functions can just give up if pte_offset_map() or pte_offset_map_lock() fails. And there's no need for a preliminary pmd_trans_unstable() or other such check, since such cases are now safely handled inside. Link: https://lkml.kernel.org/r/7b9bd85d-1652-cbf2-159d-f503b45e5b@google.comSigned-off-by:
-
Hugh Dickins authored
Failures here would be surprising: pte_advanced_tests() and pte_clear_tests() and __page_table_check_pte_clear_range() each issue a warning if pte_offset_map() or pte_offset_map_lock() fails. Link: https://lkml.kernel.org/r/3ea9e4f-e5cf-d7d9-4c2-291b3c5a3636@google.comSigned-off-by:
-
Hugh Dickins authored
mfill_atomic_install_pte() and mfill_atomic_pte_zeropage() treat failed pte_offset_map_lock() as -EAGAIN, which mfill_atomic() already returns to user for a similar race. Link: https://lkml.kernel.org/r/50cf3930-1bfa-4de9-a079-3da47b7ce17b@google.comSigned-off-by:
-
