- 25 Jan, 2022 8 commits
-
-
Shannon Nelson authored
Pull the watchdog init code out to a separate bite-sized function. Code cleaning for now, will be a useful change in the near future. Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
The watchdog expects the lif to fully exist when it goes off, so lets not start the watchdog until all is ready in case there is some quirky time dialation that makes probe take multiple seconds. Fixes: 089406bc ("ionic: add a watchdog timer to monitor heartbeat") Signed-off-by:
-
Shannon Nelson authored
Sparse seems to have gotten a little more picky lately and we need to revisit this bit of code to make sparse happy. warning: incorrect type in initializer (different address spaces) expected union ionic_dev_cmd_regs *regs got union ionic_dev_cmd_regs [noderef] __iomem *dev_cmd_regs warning: incorrect type in argument 2 (different address spaces) expected void [noderef] __iomem * got unsigned int * warning: incorrect type in argument 1 (different address spaces) expected void volatile [noderef] __iomem * got union ionic_dev_cmd * Fixes: d701ec32 ("ionic: clean up sparse complaints") Signed-off-by:
-
Eric Dumazet authored
Use kvzalloc()/kvfree() instead of hand coded functions. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Qing Deng authored
Since IPv4 routes support IPv6 gateways now, we can route IPv4 traffic in NBMA tunnels. Signed-off-by:
Qing Deng <i@moy.cat> Signed-off-by:
-
Jisheng Zhang authored
The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use true or false instead of 1/0. Signed-off-by:
Jisheng Zhang <jszhang@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220123152241.1480-1-jszhang@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Colin Ian King authored
Variable val is being initialized with a value that is never read, it is being re-assigned later. The assignment is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20220123184936.113486-1-colin.i.king@gmail.comSigned-off-by:
-
Colin Ian King authored
Variable reg is being masked however the variable is never read after this. The assignment is redundant and can be removed. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220123184035.112785-1-colin.i.king@gmail.comSigned-off-by:
-
- 24 Jan, 2022 22 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-01-24 We've added 80 non-merge commits during the last 14 day(s) which contain a total of 128 files changed, 4990 insertions(+), 895 deletions(-). The main changes are: 1) Add XDP multi-buffer support and implement it for the mvneta driver, from Lorenzo Bianconi, Eelco Chaudron and Toke Høiland-Jørgensen. 2) Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra, from Kumar Kartikeya Dwivedi. 3) Extend BPF cgroup programs to export custom ret value to userspace via two helpers bpf_get_retval() and bpf_set_retval(), from YiFei Zhu. 4) Add support for AF_UNIX iterator batching, from Kuniyuki Iwashima. 5) Complete missing UAPI BPF helper description and change bpf_doc.py script to enforce consistent & complete helper documentation, from Usama Arif. 6) Deprecate libbpf's legacy BPF map definitions and streamline XDP APIs to follow tc-based APIs, from Andrii Nakryiko. 7) Support BPF_PROG_QUERY for BPF programs attached to sockmap, from Di Zhu. 8) Deprecate libbpf's bpf_map__def() API and replace users with proper getters and setters, from Christy Lee. 9) Extend libbpf's btf__add_btf() with an additional hashmap for strings to reduce overhead, from Kui-Feng Lee. 10) Fix bpftool and libbpf error handling related to libbpf's hashmap__new() utility function, from Mauricio Vásquez. 11) Add support to BTF program names in bpftool's program dump, from Raman Shukhau. 12) Fix resolve_btfids build to pick up host flags, from Connor O'Brien. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (80 commits) selftests, bpf: Do not yet switch to new libbpf XDP APIs selftests, xsk: Fix rx_full stats test bpf: Fix flexible_array.cocci warnings xdp: disable XDP_REDIRECT for xdp frags bpf: selftests: add CPUMAP/DEVMAP selftests for xdp frags bpf: selftests: introduce bpf_xdp_{load,store}_bytes selftest net: xdp: introduce bpf_xdp_pointer utility routine bpf: generalise tail call map compatibility check libbpf: Add SEC name for xdp frags programs bpf: selftests: update xdp_adjust_tail selftest to include xdp frags bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature bpf: introduce frags support to bpf_prog_test_run_xdp() bpf: move user_size out of bpf_test_init bpf: add frags support to xdp copy helpers bpf: add frags support to the bpf_xdp_adjust_tail() API bpf: introduce bpf_xdp_get_buff_len helper net: mvneta: enable jumbo frames if the loaded XDP program support frags bpf: introduce BPF_F_XDP_HAS_FRAGS flag in prog_flags loading the ebpf program net: mvneta: add frags support to XDP_TX xdp: add frags support to xdp_return_{buff/frame} ... ==================== Link: https://lore.kernel.org/r/20220124221235.18993-1-daniel@iogearbox.netSigned-off-by: -
Daniel Borkmann authored
Revert commit 54435652 ("selftests/bpf: switch to new libbpf XDP APIs") for now given this will heavily conflict with 4b27480d ("bpf/selftests: convert xdp_link test to ASSERT_* macros") upon merge. Andrii agreed to redo the conversion cleanly after trees merged. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Andrii Nakryiko <andrii@kernel.org>
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.17-20220124' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-01-24 The first patch updates the email address of Brian Silverman from his former employer to his private address. The next patch fixes DT bindings information for the tcan4x5x SPI CAN driver. The following patch targets the m_can driver and fixes the introduction of FIFO bulk read support. Another patch for the tcan4x5x driver, which fixes the max register value for the regmap config. The last patch for the flexcan driver marks the RX mailbox support for the MCF5441X as support. * tag 'linux-can-fixes-for-5.17-20220124' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: flexcan: mark RX via mailboxes as supported on MCF5441X can: tcan4x5x: regmap: fix max register value can: m_can: m_can_fifo_{read,write}: don't read or write from/to FIFO if length is 0 dt-bindings: can: tcan4x5x: fix mram-cfg RX FIFO config mailmap: update email address of Brian Silverman ==================== Link: https://lore.kernel.org/r/20220124175955.3464134-1-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
Most flexcan IP cores support 2 RX modes: - FIFO - mailbox The flexcan IP core on the MCF5441X cannot receive CAN RTR messages via mailboxes. However the mailbox mode is more performant. The commit | 1c45f577 ("can: flexcan: add ethtool support to change rx-rtr setting during runtime") added support to switch from FIFO to mailbox mode on these cores. After testing the mailbox mode on the MCF5441X by Angelo Dureghello, this patch marks it (without RTR capability) as supported. Further the IP core overview table is updated, that RTR reception via mailboxes is not supported. Link: https://lore.kernel.org/all/20220121084425.3141218-1-mkl@pengutronix.deTested-by:
Angelo Dureghello <angelo@kernel-space.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
The MRAM of the tcan4x5x has a size of 2K and starts at 0x8000. There are no further registers in the tcan4x5x making 0x87fc the biggest addressable register. This patch fixes the max register value of the regmap config from 0x8ffc to 0x87fc. Fixes: 6e1caaf8 ("can: tcan4x5x: fix max register value") Link: https://lore.kernel.org/all/20220119064011.2943292-1-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
In order to optimize FIFO access, especially on m_can cores attached to slow busses like SPI, in patch | e3938177 ("can: m_can: Disable IRQs on FIFO bus errors") bulk read/write support has been added to the m_can_fifo_{read,write} functions. That change leads to the tcan driver to call regmap_bulk_{read,write}() with a length of 0 (for CAN frames with 0 data length). regmap treats this as an error: | tcan4x5x spi1.0 tcan4x5x0: FIFO write returned -22 This patch fixes the problem by not calling the cdev->ops->{read,write)_fifo() in case of a 0 length read/write. Fixes: e3938177 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/20220114155751.2651888-1-mkl@pengutronix.de Cc: stable@vger.kernel.org Cc: Matt Kline <matt@bitbashing.io> Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Reported-by:
Michael Anochin <anochin@photo-meter.com> Signed-off-by:
-
Marc Kleine-Budde authored
This tcan4x5x only comes with 2K of MRAM, a RX FIFO with a dept of 32 doesn't fit into the MRAM. Use a depth of 16 instead. Fixes: 4edd396a ("dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver") Link: https://lore.kernel.org/all/20220119062951.2939851-1-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
Brian Silverman's address at bluerivertech.com is not valid anymore, use Brian's private email address instead. Link: https://lore.kernel.org/all/20220110082359.2019735-1-mkl@pengutronix.de Cc: Brian Silverman <bsilver16384@gmail.com> Signed-off-by:
-
Magnus Karlsson authored
Fix the rx_full stats test so that it correctly reports pass even when the fill ring is not full of buffers. Fixes: 872a1184 ("selftests: xsk: Put the same buffer only once in the fill ring") Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by:
-
kernel test robot authored
Zero-length and one-element arrays are deprecated, see: Documentation/process/deprecated.rst Flexible-array members should be used instead. Generated by: scripts/coccinelle/misc/flexible_array.cocci Fixes: c1ff181f ("selftests/bpf: Extend kfunc selftests") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Julia Lawall <julia.lawall@inria.fr> Signed-off-by:
-
Jisheng Zhang authored
The tx_coalesce and mii_irq are not used at all now, so remove them. Signed-off-by:
-
Christophe JAILLET authored
Simplify code by using bitmap_weight() and bitmap_zero() instead of hand-writing these functions. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
Xin Long authored
When 'ping' changes to use PING socket instead of RAW socket by: # sysctl -w net.ipv4.ping_group_range="0 100" the selftests 'router_broadcast.sh' will fail, as such command # ip vrf exec vrf-h1 ping -I veth0 198.51.100.255 -b can't receive the response skb by the PING socket. It's caused by mismatch of sk_bound_dev_if and dif in ping_rcv() when looking up the PING socket, as dif is vrf-h1 if dif's master was set to vrf-h1. This patch is to fix this regression by also checking the sk_bound_dev_if against sdif so that the packets can stil be received even if the socket is not bound to the vrf device but to the real iif. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Wen Gu authored
We encountered a crash in smc_setsockopt() and it is caused by accessing smc->clcsock after clcsock was released. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 50309 Comm: nginx Kdump: loaded Tainted: G E 5.16.0-rc4+ #53 RIP: 0010:smc_setsockopt+0x59/0x280 [smc] Call Trace: <TASK> __sys_setsockopt+0xfc/0x190 __x64_sys_setsockopt+0x20/0x30 do_syscall_64+0x34/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f16ba83918e </TASK> This patch tries to fix it by holding clcsock_release_lock and checking whether clcsock has already been released before access. In case that a crash of the same reason happens in smc_getsockopt() or smc_switch_to_fallback(), this patch also checkes smc->clcsock in them too. And the caller of smc_switch_to_fallback() will identify whether fallback succeeds according to the return value. Fixes: fd57770d ("net/smc: wait for pending work before clcsock release_sock") Link: https://lore.kernel.org/lkml/5dd7ffd1-28e2-24cc-9442-1defec27375e@linux.ibm.com/T/Signed-off-by:
Wen Gu <guwen@linux.alibaba.com> Acked-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
With previous bug fix, ->wait_capability flag is no longer needed and can be removed. Fixes: 249168ad ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by:
Dany Madden <drt@linux.ibm.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
ibmvnic_tasklet() continuously spins waiting for responses to all capability requests. It does this to avoid encountering an error during initialization of the vnic. However if there is a bug in the VIOS and we do not receive a response to one or more queries the tasklet ends up spinning continuously leading to hard lock ups. If we fail to receive a message from the VIOS it is reasonable to timeout the login attempt rather than spin indefinitely in the tasklet. Fixes: 249168ad ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by:
-
Sukadev Bhattiprolu authored
We use ->running_cap_crqs to determine when the ibmvnic_tasklet() should send out the next protocol message type. i.e when we get back responses to all our QUERY_CAPABILITY CRQs we send out REQUEST_CAPABILITY crqs. Similiary, when we get responses to all the REQUEST_CAPABILITY crqs, we send out the QUERY_IP_OFFLOAD CRQ. We currently increment ->running_cap_crqs as we send out each CRQ and have the ibmvnic_tasklet() send out the next message type, when this running_cap_crqs count drops to 0. This assumes that all the CRQs of the current type were sent out before the count drops to 0. However it is possible that we send out say 6 CRQs, get preempted and receive all the 6 responses before we send out the remaining CRQs. This can result in ->running_cap_crqs count dropping to zero before all messages of the current type were sent and we end up sending the next protocol message too early. Instead initialize the ->running_cap_crqs upfront so the tasklet will only send the next protocol message after all responses are received. Use the cap_reqs local variable to also detect any discrepancy (either now or in future) in the number of capability requests we actually send. Currently only send_query_cap() is affected by this behavior (of sending next message early) since it is called from the worker thread (during reset) and from application thread (during ->ndo_open()) and they can be preempted. send_request_cap() is only called from the tasklet which processes CRQ responses sequentially, is not be affected. But to maintain the existing symmtery with send_query_capability() we update send_request_capability() also. Fixes: 249168ad ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by:
-
Sukadev Bhattiprolu authored
If auto-priority-failover (APF) is enabled and there are at least two backing devices of different priorities, some resets like fail-over, change-param etc can cause at least two back to back failovers. (Failover from high priority backing device to lower priority one and then back to the higher priority one if that is still functional). Depending on the timimg of the two failovers it is possible to trigger a "hard" reset and for the hard reset to fail due to failovers. When this occurs, the driver assumes that the network is unstable and disables the VNIC for a 60-second "settling time". This in turn can cause the ethtool command to fail with "No such device" while the vnic automatically recovers a little while later. Given that it's possible to have two back to back failures, allow for extra failures before disabling the vnic for the settling time. Fixes: f15fde9d ("ibmvnic: delay next reset if hard reset fails") Signed-off-by:
-
Jakub Kicinski authored
During IP fragmentation we sanitize IP options. This means overwriting options which should not be copied with NOPs. Only the first fragment has the original, full options. ip_fraglist_prepare() copies the IP header and options from previous fragment to the next one. Commit 19c3401a ("net: ipv4: place control buffer handling away from fragmentation iterators") moved sanitizing options before ip_fraglist_prepare() which means options are sanitized and then overwritten again with the old values. Fixing this is not enough, however, nor did the sanitization work prior to aforementioned commit. ip_options_fragment() (which does the sanitization) uses ipcb->opt.optlen for the length of the options. ipcb->opt of fragments is not populated (it's 0), only the head skb has the state properly built. So even when called at the right time ip_options_fragment() does nothing. This seems to date back all the way to v2.5.44 when the fast path for pre-fragmented skbs had been introduced. Prior to that ip_options_build() would have been called for every fragment (in fact ever since v2.5.44 the fragmentation handing in ip_options_build() has been dead code, I'll clean it up in -next). In the original patch (see Link) caixf mentions fixing the handling for fragments other than the second one, but I'm not sure how _any_ fragment could have had their options sanitized with the code as it stood. Tested with python (MTU on lo lowered to 1000 to force fragmentation): import socket s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) s.setsockopt(socket.IPPROTO_IP, socket.IP_OPTIONS, bytearray([7,4,5,192, 20|0x80,4,1,0])) s.sendto(b'1'*2000, ('127.0.0.1', 1234)) Before: IP (tos 0x0, ttl 64, id 1053, offset 0, flags [+], proto UDP (17), length 996, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256)) localhost.36500 > localhost.search-agent: UDP, length 2000 IP (tos 0x0, ttl 64, id 1053, offset 968, flags [+], proto UDP (17), length 996, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256)) localhost > localhost: udp IP (tos 0x0, ttl 64, id 1053, offset 1936, flags [none], proto UDP (17), length 100, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256)) localhost > localhost: udp After: IP (tos 0x0, ttl 96, id 42549, offset 0, flags [+], proto UDP (17), length 996, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256)) localhost.51607 > localhost.search-agent: UDP, bad length 2000 > 960 IP (tos 0x0, ttl 96, id 42549, offset 968, flags [+], proto UDP (17), length 996, options (NOP,NOP,NOP,NOP,RA value 256)) localhost > localhost: udp IP (tos 0x0, ttl 96, id 42549, offset 1936, flags [none], proto UDP (17), length 100, options (NOP,NOP,NOP,NOP,RA value 256)) localhost > localhost: udp RA (20 | 0x80) is now copied as expected, RR (7) is "NOPed out". Link: https://lore.kernel.org/netdev/20220107080559.122713-1-ooppublic@163.com/ Fixes: 19c3401a ("net: ipv4: place control buffer handling away from fragmentation iterators") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
caixf <ooppublic@163.com> Signed-off-by:
-
Jianguo Wu authored
After commit:7866a621 ("dev: add per net_device packet type chains"), we can not get packet types that are bound to a specified net device by /proc/net/ptype, this patch fix the regression. Run "tcpdump -i ens192 udp -nns0" Before and after apply this patch: Before: [root@localhost ~]# cat /proc/net/ptype Type Device Function 0800 ip_rcv 0806 arp_rcv 86dd ipv6_rcv After: [root@localhost ~]# cat /proc/net/ptype Type Device Function ALL ens192 tpacket_rcv 0800 ip_rcv 0806 arp_rcv 86dd ipv6_rcv v1 -> v2: - fix the regression rather than adding new /proc API as suggested by Stephen Hemminger. Fixes: 7866a621 ("dev: add per net_device packet type chains") Signed-off-by:
Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by:
-
Hangbin Liu authored
bond_option_active_slave_get_rcu() should not be used in rtnl_mutex as it use rcu_dereference(). Replace to rcu_dereference_rtnl() so we also can use this function in rtnl protected context. With this update, we can rmeove the rcu_read_lock/unlock in bonding .ndo_eth_ioctl and .get_ts_info. Reported-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Fixes: 94dd016a ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") Signed-off-by:
-
Marek Behún authored
Commit ce0aa27f ("sfp: add sfp-bus to bridge between network devices and sfp cages") added code which finds SFP bus DT node even if the node is disabled with status = "disabled". Because of this, when phylink is created, it ends with non-null .sfp_bus member, even though the SFP module is not probed (because the node is disabled). We need to ignore disabled SFP bus node. Fixes: ce0aa27f ("sfp: add sfp-bus to bridge between network devices and sfp cages") Signed-off-by:
Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 2203cbf2 ("net: sfp: move fwnode parsing into sfp-bus layer") Signed-off-by:
-
- 22 Jan, 2022 3 commits
-
-
Justin Iurman authored
The IOAM queue-depth data field was added a few weeks ago, but the test unit was not updated accordingly. Reported-by:
kernel test robot <oliver.sang@intel.com> Fixes: b63c5478 ("ipv6: ioam: Support for Queue depth data field") Signed-off-by:
Justin Iurman <justin.iurman@uliege.be> Link: https://lore.kernel.org/r/20220121173449.26918-1-justin.iurman@uliege.beSigned-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() to capture the fields to be reset, so that memset() can be appropriately bounds-checked by the compiler. Cc: Matthieu Baerts <matthieu.baerts@tessares.net> Cc: mptcp@lists.linux.dev Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20220121073935.1154263-1-keescook@chromium.orgSigned-off-by:
-
David Howells authored
Improve retransmission backoff by only backing off when we retransmit data packets rather than when we set the lost ack timer. To this end: (1) In rxrpc_resend(), use rxrpc_get_rto_backoff() when setting the retransmission timer and only tell it that we are retransmitting if we actually have things to retransmit. Note that it's possible for the retransmission algorithm to race with the processing of a received ACK, so we may see no packets needing retransmission. (2) In rxrpc_send_data_packet(), don't bump the backoff when setting the ack_lost_at timer, as it may then get bumped twice. With this, when looking at one particular packet, the retransmission intervals were seen to be 1.5ms, 2ms, 3ms, 5ms, 9ms, 17ms, 33ms, 71ms, 136ms, 264ms, 544ms, 1.088s, 2.1s, 4.2s and 8.3s. Fixes: c410bf01 ("rxrpc: Fix the excessive initial retransmission timeout") Suggested-by:Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
-
- 21 Jan, 2022 7 commits
-
-
Alexei Starovoitov authored
Lorenzo Bianconi says: ==================== This series introduces XDP frags support. The mvneta driver is the first to support these new "non-linear" xdp_{buff,frame}. Reviewers please focus on how these new types of xdp_{buff,frame} packets traverse the different layers and the layout design. It is on purpose that BPF-helpers are kept simple, as we don't want to expose the internal layout to allow later changes. The main idea for the new XDP frags layout is to reuse the same structure used for non-linear SKB. This rely on the "skb_shared_info" struct at the end of the first buffer to link together subsequent buffers. Keeping the layout compatible with SKBs is also done to ease and speedup creating a SKB from an xdp_{buff,frame}. Converting xdp_frame to SKB and deliver it to the network stack is shown in patch 05/18 (e.g. cpumaps). A frags bit (XDP_FLAGS_HAS_FRAGS) has been introduced in the flags field of xdp_{buff,frame} structure to notify the bpf/network layer if this is a non-linear xdp frame (XDP_FLAGS_HAS_FRAGS set) or not (XDP_FLAGS_HAS_FRAGS not set). The frags bit will be set by a xdp frags capable driver only for non-linear frames maintaining the capability to receive linear frames without any extra cost since the skb_shared_info structure at the end of the first buffer will be initialized only if XDP_FLAGS_HAS_FRAGS bit is set. Moreover the flags field in xdp_{buff,frame} will be reused even for xdp rx csum offloading in future series. Typical use cases for this series are: - Jumbo-frames - Packet header split (please see Google’s use-case @ NetDevConf 0x14, [0]) - TSO/GRO for XDP_REDIRECT The three following ebpf helpers (and related selftests) has been introduced: - bpf_xdp_load_bytes: This helper is provided as an easy way to load data from a xdp buffer. It can be used to load len bytes from offset from the frame associated to xdp_md, into the buffer pointed by buf. - bpf_xdp_store_bytes: Store len bytes from buffer buf into the frame associated to xdp_md, at offset. - bpf_xdp_get_buff_len: Return the total frame size (linear + paged parts) bpf_xdp_adjust_tail and bpf_xdp_copy helpers have been modified to take into account non-linear xdp frames. Moreover, similar to skb_header_pointer, we introduced bpf_xdp_pointer utility routine to return a pointer to a given position in the xdp_buff if the requested area (offset + len) is contained in a contiguous memory area otherwise it must be copied in a bounce buffer provided by the caller running bpf_xdp_copy_buf(). BPF_F_XDP_HAS_FRAGS flag has been introduced to notify the kernel the eBPF program fully support xdp frags. SEC("xdp.frags"), SEC_DEF("xdp.frags/devmap") and SEC_DEF("xdp.frags/cpumap") have been introduced to declare xdp frags support. The NIC driver is expected to reject an eBPF program if it is running in XDP frags mode and the program does not support XDP frags. In the same way it is not possible to mix XDP frags and XDP legacy programs in a CPUMAP/DEVMAP or tailcall a XDP frags/legacy program from a legacy/frags one. More info about the main idea behind this approach can be found here [1][2]. Changes since v22: - remove leftover CHECK macro usage - reintroduce SEC_XDP_FRAGS flag in sec_def_flags - rename xdp multi_frags in xdp frags - do not report xdp_frags support in fdinfo Changes since v21: - rename *_mb in *_frags: e.g: s/xdp_buff_is_mb/xdp_buff_has_frags - rely on ASSERT_* and not on CHECK in bpf_xdp_load_bytes/bpf_xdp_store_bytes self-tests - change new multi.frags SEC definitions to use the following schema: prog_type.prog_flags/attach_place - get rid of unnecessary properties in new multi.frags SEC definitions - rebase on top of bpf-next Changes since v20: - rebase to current bpf-next Changes since v19: - do not run deprecated bpf_prog_load() - rely on skb_frag_size_add/skb_frag_size_sub in bpf_xdp_mb_increase_tail/bpf_xdp_mb_shrink_tail - rely on sinfo->nr_frags in bpf_xdp_mb_shrink_tail to check if the frame has been shrunk to a single-buffer one - allow XDP_REDIRECT of a xdp-mb frame into a CPUMAP Changes since v18: - fix bpf_xdp_copy_buf utility routine when we want to load/store data contained in frag<n> - add a selftest for bpf_xdp_load_bytes/bpf_xdp_store_bytes when the caller accesses data contained in frag<n> and frag<n+1> Changes since v17: - rework bpf_xdp_copy to squash base and frag management - remove unused variable in bpf_xdp_mb_shrink_tail() - move bpf_xdp_copy_buf() out of bpf_xdp_pointer() - add sanity check for len in bpf_xdp_pointer() - remove EXPORT_SYMBOL for __xdp_return() - introduce frag_size field in xdp_rxq_info to let the driver specify max value for xdp fragments. frag_size set to 0 means the tail increase of last the fragment is not supported. Changes since v16: - do not allow tailcalling a xdp multi-buffer/legacy program from a legacy/multi-buff one. - do not allow mixing xdp multi-buffer and xdp legacy programs in a CPUMAP/DEVMAP - add selftests for CPUMAP/DEVMAP xdp mb compatibility - disable XDP_REDIRECT for xdp multi-buff for the moment - set max offset value to 0xffff in bpf_xdp_pointer - use ARG_PTR_TO_UNINIT_MEM and ARG_CONST_SIZE for arg3_type and arg4_type of bpf_xdp_store_bytes/bpf_xdp_load_bytes Changes since v15: - let the verifier check buf is not NULL in bpf_xdp_load_bytes/bpf_xdp_store_bytes helpers - return an error if offset + length is over frame boundaries in bpf_xdp_pointer routine - introduce BPF_F_XDP_MB flag for bpf_attr to notify the kernel the eBPF program fully supports xdp multi-buffer. - reject a non XDP multi-buffer program if the driver is running in XDP multi-buffer mode. Changes since v14: - intrudce bpf_xdp_pointer utility routine and bpf_xdp_load_bytes/bpf_xdp_store_bytes helpers - drop bpf_xdp_adjust_data helper - drop xdp_frags_truesize in skb_shared_info - explode bpf_xdp_mb_adjust_tail in bpf_xdp_mb_increase_tail and bpf_xdp_mb_shrink_tail Changes since v13: - use u32 for xdp_buff/xdp_frame flags field - rename xdp_frags_tsize in xdp_frags_truesize - fixed comments Changes since v12: - fix bpf_xdp_adjust_data helper for single-buffer use case - return -EFAULT in bpf_xdp_adjust_{head,tail} in case the data pointers are not properly reset - collect ACKs from John Changes since v11: - add missing static to bpf_xdp_get_buff_len_proto structure - fix bpf_xdp_adjust_data helper when offset is smaller than linear area length. Changes since v10: - move xdp->data to the requested payload offset instead of to the beginning of the fragment in bpf_xdp_adjust_data() Changes since v9: - introduce bpf_xdp_adjust_data helper and related selftest - add xdp_frags_size and xdp_frags_tsize fields in skb_shared_info - introduce xdp_update_skb_shared_info utility routine in ordere to not reset frags array in skb_shared_info converting from a xdp_buff/xdp_frame to a skb - simplify bpf_xdp_copy routine Changes since v8: - add proper dma unmapping if XDP_TX fails on mvneta for a xdp multi-buff - switch back to skb_shared_info implementation from previous xdp_shared_info one - avoid using a bietfield in xdp_buff/xdp_frame since it introduces performance regressions. Tested now on 10G NIC (ixgbe) to verify there are no performance penalties for regular codebase - add bpf_xdp_get_buff_len helper and remove frame_length field in xdp ctx - add data_len field in skb_shared_info struct - introduce XDP_FLAGS_FRAGS_PF_MEMALLOC flag Changes since v7: - rebase on top of bpf-next - fix sparse warnings - improve comments for frame_length in include/net/xdp.h Changes since v6: - the main difference respect to previous versions is the new approach proposed by Eelco to pass full length of the packet to eBPF layer in XDP context - reintroduce multi-buff support to eBPF kself-tests - reintroduce multi-buff support to bpf_xdp_adjust_tail helper - introduce multi-buffer support to bpf_xdp_copy helper - rebase on top of bpf-next Changes since v5: - rebase on top of bpf-next - initialize mb bit in xdp_init_buff() and drop per-driver initialization - drop xdp->mb initialization in xdp_convert_zc_to_xdp_frame() - postpone introduction of frame_length field in XDP ctx to another series - minor changes Changes since v4: - rebase ontop of bpf-next - introduce xdp_shared_info to build xdp multi-buff instead of using the skb_shared_info struct - introduce frame_length in xdp ctx - drop previous bpf helpers - fix bpf_xdp_adjust_tail for xdp multi-buff - introduce xdp multi-buff self-tests for bpf_xdp_adjust_tail - fix xdp_return_frame_bulk for xdp multi-buff Changes since v3: - rebase ontop of bpf-next - add patch 10/13 to copy back paged data from a xdp multi-buff frame to userspace buffer for xdp multi-buff selftests Changes since v2: - add throughput measurements - drop bpf_xdp_adjust_mb_header bpf helper - introduce selftest for xdp multibuffer - addressed comments on bpf_xdp_get_frags_count - introduce xdp multi-buff support to cpumaps Changes since v1: - Fix use-after-free in xdp_return_{buff/frame} - Introduce bpf helpers - Introduce xdp_mb sample program - access skb_shared_info->nr_frags only on the last fragment Changes since RFC: - squash multi-buffer bit initialization in a single patch - add mvneta non-linear XDP buff support for tx side [0] https://netdevconf.info/0x14/session.html?talk-the-path-to-tcp-4k-mtu-and-rx-zerocopy [1] https://github.com/xdp-project/xdp-project/blob/master/areas/core/xdp-multi-buffer01-design.org [2] https://netdevconf.info/0x14/session.html?tutorial-add-XDP-support-to-a-NIC-driver (XDPmulti-buffers section) Eelco Chaudron (3): bpf: add frags support to the bpf_xdp_adjust_tail() API bpf: add frags support to xdp copy helpers bpf: selftests: update xdp_adjust_tail selftest to include xdp frags Lorenzo Bianconi (19): net: skbuff: add size metadata to skb_shared_info for xdp xdp: introduce flags field in xdp_buff/xdp_frame net: mvneta: update frags bit before passing the xdp buffer to eBPF layer net: mvneta: simplify mvneta_swbm_add_rx_fragment management net: xdp: add xdp_update_skb_shared_info utility routine net: marvell: rely on xdp_update_skb_shared_info utility routine xdp: add frags support to xdp_return_{buff/frame} net: mvneta: add frags support to XDP_TX bpf: introduce BPF_F_XDP_HAS_FRAGS flag in prog_flags loading the ebpf program net: mvneta: enable jumbo frames if the loaded XDP program support frags bpf: introduce bpf_xdp_get_buff_len helper bpf: move user_size out of bpf_test_init bpf: introduce frags support to bpf_prog_test_run_xdp() bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature libbpf: Add SEC name for xdp frags programs net: xdp: introduce bpf_xdp_pointer utility routine bpf: selftests: introduce bpf_xdp_{load,store}_bytes selftest bpf: selftests: add CPUMAP/DEVMAP selftests for xdp frags xdp: disable XDP_REDIRECT for xdp frags ==================== Signed-off-by: -
Lorenzo Bianconi authored
XDP_REDIRECT is not fully supported yet for xdp frags since not all XDP capable drivers can map non-linear xdp_frame in ndo_xdp_xmit so disable it for the moment. Acked-by:
Toke Hoiland-Jorgensen <toke@redhat.com> Acked-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/0da25e117d0e2673f5d0ce6503393c55c6fb1be9.1642758637.git.lorenzo@kernel.orgSigned-off-by:
-
Lorenzo Bianconi authored
Verify compatibility checks attaching a XDP frags program to a CPUMAP/DEVMAP Acked-by:
-
Lorenzo Bianconi authored
Introduce kernel selftest for new bpf_xdp_{load,store}_bytes helpers. and bpf_xdp_pointer/bpf_xdp_copy_buf utility routines. Acked-by: -
Lorenzo Bianconi authored
Similar to skb_header_pointer, introduce bpf_xdp_pointer utility routine to return a pointer to a given position in the xdp_buff if the requested area (offset + len) is contained in a contiguous memory area otherwise it will be copied in a bounce buffer provided by the caller. Similar to the tc counterpart, introduce the two following xdp helpers: - bpf_xdp_load_bytes - bpf_xdp_store_bytes Reviewed-by:
Eelco Chaudron <echaudro@redhat.com> Acked-by:
-
Toke Hoiland-Jorgensen authored
The check for tail call map compatibility ensures that tail calls only happen between maps of the same type. To ensure backwards compatibility for XDP frags we need a similar type of check for cpumap and devmap programs, so move the state from bpf_array_aux into bpf_map, add xdp_has_frags to the check, and apply the same check to cpumap and devmap. Acked-by:
-
Lorenzo Bianconi authored
Introduce support for the following SEC entries for XDP frags property: - SEC("xdp.frags") - SEC("xdp.frags/devmap") - SEC("xdp.frags/cpumap") Acked-by:
-
