STM32F4 and STM32F7 can't switch to spi device mode.
Forbid this property with compatible "st,stm32f4-spi".
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230615075815.310261-4-valentin.caron@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for stm32h7 to use SPI controller in device role.
In such case, the spi instance should have the spi-slave property
defined.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230615075815.310261-5-valentin.caron@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

Avoid usage of deprecated dmaengine_terminate_all and use
dmaengine_terminate_sync and dmaengine_terminate_async instead.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230615075815.310261-3-valentin.caron@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

Preparing introduction of SPI device, rename the spi_master structure
into spi_controller. This doesn't have any functional impact since
spi_master was already a macro for spi_controller.
Referring now to ctrl instead of master since the spi_controller
structure might not be used as a master controller only.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230615075815.310261-2-valentin.caron@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Andi Shyti <andi.shyti@kernel.org>:

Two small cleanups in the probe function. The first puts in use
the managed spi master allocation while the second implements the
dev_err_probe() function.

Remove a misleading comment about the DMA operations of the Intel Mount
Evans SoC's SPI Controller as requested by Serge.
Signed-off-by: Abe Kohandel <abe.kohandel@intel.com>
Link: https://lore.kernel.org/linux-spi/20230606191333.247ucbf7h3tlooxf@mobilestation/
Fixes: 0760d5d0 ("spi: dw: Add compatible for Intel Mount Evans SoC")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230606231844.726272-1-abe.kohandel@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Document the DesignWare SSI controller compatible for Intel Mount Evans
Integrated Management Complex SoC.
Signed-off-by: Abe Kohandel <abe.kohandel@intel.com>
Link: https://lore.kernel.org/r/20230606145402.474866-3-abe.kohandel@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Intel Mount Evans SoC's Integrated Management Complex uses the SPI
controller for access to a NOR SPI FLASH. However, the SoC doesn't
provide a mechanism to override the native chip select signal.

This driver doesn't use DMA for memory operations when a chip select
override is not provided due to the native chip select timing behavior.
As a result no DMA configuration is done for the controller and this
configuration is not tested.

The controller also has an errata where a full TX FIFO can result in
data corruption. The suggested workaround is to never completely fill
the FIFO. The TX FIFO has a size of 32 so the fifo_len is set to 31.
Signed-off-by: Abe Kohandel <abe.kohandel@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230606145402.474866-2-abe.kohandel@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Simplify the code by using dev_err_probe() instead of dev_err()
and 'return'.
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20230606012051.2139333-3-andi.shyti@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Use devm_spi_alloc_master() and get rid of one goto error path
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20230606012051.2139333-2-andi.shyti@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When the spi controller is registered and the cs_gpiods cannot be
assigned, causing a defer of the probe, there is an error print saying:
"probe - problem registering spi master"

This should not be announced as an error. Print this message for all
errors except for the probe defer.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20230602-pl022-defer-fix-v2-1-383f6bc2293a@axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

Commit 87c61417 (spi: spi-imx: fix MX51_ECSPI_* macros when cs >
3) ensured that the argument passed to the macros was masked with &3,
so that we no longer write outside the intended fields in the various
control registers. When all chip selects are gpios, this works just
fine.

However, when a mix of native and gpio chip selects are in use, that
masking is too naive. Say, for example, that SS0 is muxed as native
chip select, and there is also a chip at 4 (obviously with a gpio
cs). In that case, when accessing the latter chip, both the SS0 pin
and the gpio pin will be asserted low.

The fix for this is to use the ->unused_native_cs value as channel
number for any spi device which uses a gpio as chip select.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20230602115731.708883-1-linux@rasmusvillemoes.dkSigned-off-by: Mark Brown <broonie@kernel.org>

Replace the tuple devm_clk_get()/clk_prepare_enable() with the
single function devm_clk_get_enabled().
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20230531205550.568340-1-andi.shyti@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Remove address/size-cells because they are already mentioned by common
spi-controller.yaml.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230601095908.563865-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Remove cs-gpios because it is already mentioned by common
spi-controller.yaml.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230601095908.563865-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Remove properties already mentioned by common spi-controller.yaml and
switch to unevaluatedProperties:false to achieve same functional effect.
This makes the binding a bit smaller.  Similarly there is no need to
allow additionalProperties for children, because spi-controller.yaml
already does it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230601095908.563865-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Just drop a redundant empty line from the dw_spi_debugfs_init() function
left in the framework of the commit 0178f1e5 ("spi-dw-core.c: Fix
error checking for debugfs_create_dir") after removing the last return
statement.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20230530221725.26319-1-Sergey.Semin@baikalelectronics.ruSigned-off-by: Mark Brown <broonie@kernel.org>

Having no DMA is not an error. The simplest reason is not having it
configured. SPI will still be usable, so raise a warning instead to
get still some attention.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230531072850.739021-1-alexander.stein@ew.tq-group.comSigned-off-by: Mark Brown <broonie@kernel.org>

A warning added in commit b5762d95 ("spi: spi-qcom-qspi: Add DMA
mode support") was missing a newline. Add it.
Reported-by: Stephen Boyd <swboyd@chromium.org>
Closes: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/4573857/comment/44331d65_79128099/
Fixes: b5762d95 ("spi: spi-qcom-qspi: Add DMA mode support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230530111348.1.Ibd1f4827e18a26dc802cd6e5ac300d83dc1bc41c@changeidSigned-off-by: Mark Brown <broonie@kernel.org>

Make the pattern matching node names a bit stricter to improve DTS
consistency.  The pattern is restricted to:
1. Only one unit address or one -N suffix,
2. -N suffixes to decimal numbers.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230530144851.92059-6-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Get the fixes into CI for development.

Merge series from Boerge Struempfel <boerge.struempfel@gmail.com>:

Some spi controller switch the mosi line to high, whenever they are
idle. This may not be desired in all use cases. For example neopixel
leds can get confused and flicker due to misinterpreting the idle state.
Therefore, we introduce a new spi-mode bit, with which the idle behaviour
can be overwritten on a per device basis.

Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:

Hello,

compared to (implicit) v1 sent in March with Message-Id:
<20230309094704.2568531-1-u.kleine-koenig@pengutronix.de>, I reworked
patch 1 on feedback by AngeloGioacchino Del Regno. Patches 2 and 3 got
his Reviewed-by.

Best regards
Uwe

Uwe Kleine-König (3):
  spi: mt65xx: Properly handle failures in .remove()
  spi: mt65xx: Convert to platform remove callback returning void
  spi: mt65xx: Don't disguise a "return 0" as "return ret"

 drivers/spi/spi-mt65xx.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

base-commit: ac9a7868
--
2.39.2

Added the three missing spi mode bits SPI_3WIRE_HIZ, SPI_RX_CPHA_FLIP,
and SPI_MOSI_IDLE_LOW.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-6-boerge.struempfel@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

In order to increase usability, the command line options are sorted into
logical groups. In addition, the usage string was sorted alphabetically,
and the missing parameters '8','i' and 'o' were added. Furthermore, the
option descriptions were moved further to the right, in order to allow
for longer option names.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-5-boerge.struempfel@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Allow userspace to set SPI_MOSI_IDLE_LOW and the SPI_3WIRE_HIZ mode bit
using the SPI_IOC_WR_MODE32 ioctl.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-4-boerge.struempfel@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

By default, the spi-imx controller pulls the mosi line high, whenever it
is idle. This behaviour can be inverted per CS by setting the
corresponding DATA_CTL bit in the config register of the controller.

Also, since the controller mode-bits have to be touched anyways, the
SPI_CPOL and SPI_CPHA are replaced by the combined SPI_MODE_X_MASK flag.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-3-boerge.struempfel@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some spi controller switch the mosi line to high, whenever they are
idle. This may not be desired in all use cases. For example neopixel
leds can get confused and flicker due to misinterpreting the idle state.
Therefore, we introduce a new spi-mode bit, with which the idle behaviour
can be overwritten on a per device basis.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-2-boerge.struempfel@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch fixes the error checking in spi-dw-core.c in
debugfs_create_dir. The DebugFS kernel API is developed in
a way that the caller can safely ignore the errors that
occur during the creation of DebugFS nodes.
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Link: https://lore.kernel.org/r/20230520224025.14928-1-osmtendev@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The `width_available` array is currently placed on the
`f_ospi_supports_op_width()` function's stack.

But the array is never modified. Make it `static const`. This makes the
code slightly smaller and more efficient.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230528195830.164669-3-lars@metafoo.deSigned-off-by: Mark Brown <broonie@kernel.org>

Use `min_t` instead of `min` with casting the individual arguments.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230528195830.164669-2-lars@metafoo.deSigned-off-by: Mark Brown <broonie@kernel.org>

Replace the combination of devm_clk_get_enable() plus clk_prepare_enable()
with devm_clk_get_enabled(). Slightly reduces the amount of boilerplate
code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230528195830.164669-1-lars@metafoo.deSigned-off-by: Mark Brown <broonie@kernel.org>

Because of the earlier

	 if (ret)
		return ret;

ret is always zero at the end of mtk_spi_suspend(). Write it as explicit
return 0 for slightly improved clearness.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230530081648.2199419-4-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230530081648.2199419-3-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

Returning an error code in a platform driver's remove function is wrong
most of the time and there is an effort to make the callback return
void. To prepare this rework the function not to exit early.

There wasn't a real problem because if pm runtime resume failed the only
step missing was pm_runtime_disable() which isn't an issue.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230530081648.2199419-2-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

It is usually better to request all necessary resources (clocks,
regulators, ...) before starting to make use of them. That way they do
not change state in case one of the resources is not available yet and
probe deferral (-EPROBE_DEFER) is necessary. This is particularly
important for DMA channels and IOMMUs which are not enforced by
fw_devlink yet (unless you use fw_devlink.strict=1).

spi-qup does this in the wrong order, the clocks are enabled and
disabled again when the DMA channels are not available yet.

This causes issues in some cases: On most SoCs one of the SPI QUP
clocks is shared with the UART controller. When using earlycon UART is
actively used during boot but might not have probed yet, usually for
the same reason (waiting for the DMA controller). In this case, the
brief enable/disable cycle ends up gating the clock and further UART
console output will halt the system completely.

Avoid this by requesting the DMA channels before changing the clock
state.

Fixes: 612762e8 ("spi: qup: Add DMA capabilities")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230518-spi-qup-clk-defer-v1-1-f49fc9ca4e02@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

After commit b8a1a4cd ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f4 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230525211047.735789-1-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

this patch advertise the availability of Dual and Quad SPI mode
for ipm design.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Tim.Kuo <Tim.kuo@mediatek.com>
Link: https://lore.kernel.org/r/20230523112608.10298-1-qii.wang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge up v6.4-rc3 in order to get fixes to improve the stability of my
CI.

When unloading the spi-mt65xx kernel module during an ongoing spi-mem
operation the kernel will Oops shortly after unloading the module.
This is because wait_for_completion_timeout was still running and
returning into the no longer loaded module:

Internal error: Oops: 0000000096000005 [#1] SMP
Modules linked in: [many, but spi-mt65xx is no longer there]
CPU: 0 PID: 2578 Comm: block Tainted: G        W  O       6.3.0-next-20230428+ #0
Hardware name: Bananapi BPI-R3 (DT)
pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __lock_acquire+0x18c/0x20e8
lr : __lock_acquire+0x9b8/0x20e8
sp : ffffffc009ec3400
x29: ffffffc009ec3400 x28: 0000000000000001 x27: 0000000000000004
x26: ffffff80082888c8 x25: 0000000000000000 x24: 0000000000000000
x23: ffffffc009609da8 x22: ffffff8008288000 x21: ffffff8008288968
x20: 00000000000003c2 x19: ffffff8008be7990 x18: 00000000000002af
x17: 0000000000000000 x16: 0000000000000000 x15: ffffffc008d78970
x14: 000000000000080d x13: 00000000000002af x12: 00000000ffffffea
x11: 00000000ffffefff x10: ffffffc008dd0970 x9 : ffffffc008d78918
x8 : 0000000000017fe8 x7 : 0000000000000001 x6 : 0000000000000000
x5 : ffffff807fb53910 x4 : 0000000000000000 x3 : 0000000000000027
x2 : 0000000000000027 x1 : 0000000000000000 x0 : 00000000000c03c2
Call trace:
 __lock_acquire+0x18c/0x20e8
 lock_acquire+0x100/0x2a4
 _raw_spin_lock_irq+0x58/0x74
 __wait_for_common+0xe0/0x1b4
 wait_for_completion_timeout+0x1c/0x24
 0xffffffc000acc8a4 <--- used to be mtk_spi_transfer_wait
 spi_mem_exec_op+0x390/0x3ec
 spi_mem_no_dirmap_read+0x6c/0x88
 spi_mem_dirmap_read+0xcc/0x12c
 spinand_read_page+0xf8/0x1dc
 spinand_mtd_read+0x1b4/0x2fc
 mtd_read_oob_std+0x58/0x7c
 mtd_read_oob+0x8c/0x148
 mtd_read+0x50/0x6c
 ...

Prevent this by completing in mtk_spi_remove if needed.

Fixes: 9f763fd2 ("spi: mediatek: add spi memory support for ipm design")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/ZFAF6pJxMu1z6k4w@makrotopia.orgSigned-off-by: Mark Brown <broonie@kernel.org>