- 01 Jun, 2020 2 commits
-
-
Anson Huang authored
Convert the i.MX GPCv2 binding to DT schema format using json-schema Example is updated based on latest DT file and consumer's example is removed since it is NOT that useful. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
Rob Herring <robh@kernel.org>
-
Anson Huang authored
Convert the i.MX GPC binding to DT schema format using json-schema >From latest reference manual, there is actually ONLY 1 interrupt for GPC, so the additional GPC interrupt is removed. Consumer's example is also removed since it is NOT that useful. Signed-off-by:
-
- 29 May, 2020 23 commits
-
-
Thierry Reding authored
The binding for usb-connector is a superset of gpio-usb-b-connector. One major difference is that gpio-usb-b-connector requires at least one of the vbus-gpios and id-gpios properties to be specified. Merge the two bindings by adding the compatible string combination for the GPIO USB-B variant and an extra conditional for the required properties list to the usb-connector.yaml file. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Geert Uytterhoeven authored
Convert the Renesas Compare Match Timer (CMT) Device Tree binding documentation to json-schema. Document missing properties. Update the example to match reality. Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Anson Huang authored
Convert the i.MX8QXP LPCG binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX GPT binding to DT schema format using json-schema. Signed-off-by:
-
Lad Prabhakar authored
Add thermal sensor support for r8a7742 SoC. The Renesas RZ/G1H (r8a7742) thermal sensor module is identical to the R-Car Gen2 family. No driver change is needed due to the fallback compatible value "renesas,rcar-gen2-thermal". Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by:
-
Akash Asthana authored
Add documentation to support RX-TX & CTS-RTS GPIO pin swap in HW. Signed-off-by:
Akash Asthana <akashast@codeaurora.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Akash Asthana authored
Add documentation for the interconnect and interconnect-names properties for the GENI QUP. Signed-off-by:
-
Akash Asthana authored
Convert QUP geni-se bindings to DT schema format using json-schema. Signed-off-by:
-
Olivier Sobrie authored
Silex Insight is a microelectronic company whose headquarter is located in Belgium. Web site of the company: https://www.silexinsight.com/Signed-off-by:
Olivier Sobrie <olivier.sobrie@silexinsight.com> Signed-off-by:
-
Johan Jonker authored
A test with the command below gives this error: arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: touchscreen@3e: reg:0:0: 56 was expected The touchscreen chip on 'rk3188-bqedison2qc' and other BQ models was shipped with different addresses then the binding currently allows. Change the reg property that any address will pass. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/touchscreen/ edt-ft5x06.yaml Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Sandeep Maheswaram authored
Add documentation for the interconnects and interconnect-names properties for USB. Reviewed-by:
Sandeep Maheswaram <sanm@codeaurora.org> Signed-off-by:
-
Geert Uytterhoeven authored
Convert the Renesas Multi-Function Timer Pulse Unit 2 (MTU2) Device Tree binding documentation to json-schema. Add missing properties. Update the example to match reality. Signed-off-by:
-
Qi Zheng authored
For version 1 to 3 of the device tree, this is the node full path as a zero terminated string, starting with "/". The following equation will not hold, since the node name has been processed in the fdt_get_name(). *pathp == '/' For version 16 and later, this is the node unit name only (or an empty string for the root node). So the above equation will still not hold. So the kbasename() is redundant, just remove it. Signed-off-by:
Qi Zheng <arch0.zheng@gmail.com> Signed-off-by:
-
Anson Huang authored
Convert the i.MX1 clock binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX21 clock binding to DT schema format using json-schema, can NOT find any CCM interrupt info from reference manual and DT file, so interrupts property is removed from original binding doc. Signed-off-by:
-
Anson Huang authored
Convert the i.MX25 clock binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX27 clock binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX23 clock binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX28 clock binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX31 clock binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX35 clock binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX5 clock binding to DT schema format using json-schema. Signed-off-by:
-
Jonathan Albrieux authored
Converts documentation from txt format to yaml. Signed-off-by:
Jonathan Albrieux <jonathan.albrieux@gmail.com> Signed-off-by:
-
- 28 May, 2020 15 commits
-
-
Lad Prabhakar authored
Document r8a7742 xhci support. The driver will use the fallback compatible string "renesas,rcar-gen2-xhci", therefore no driver change is needed. Signed-off-by:
-
Lad Prabhakar authored
Document support for RZ/G1H (R8A7742) SoC. Signed-off-by:
-
Lad Prabhakar authored
Add internal PCI bridge support for r8a7742 SoC. The Renesas RZ/G1H (R8A7742) internal PCI bridge is identical to the R-Car Gen2 family. Signed-off-by:
-
Lad Prabhakar authored
Add USB PHY support for r8a7742 SoC. Renesas RZ/G1H (R8A7742) USB PHY is identical to the R-Car Gen2 family. Signed-off-by:
-
Matthias Brugger authored
The binding example is missing the fallback compatible. This is needed as the driver only matches against mt6577. Signed-off-by:
Matthias Brugger <mbrugger@suse.com> Signed-off-by:
-
Lubomir Rintel authored
A straightforward conversion of the ehci-mv binding to DT schema format using json-schema. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> [robh: add unevaluatedProperties] Signed-off-by:
-
Lubomir Rintel authored
A straightforward conversion of the the spi-pxa2xx binding to DT schema format using json-schema. Signed-off-by:
-
Lubomir Rintel authored
Convert the marvell,mmp2-ccic binding to DT schema format using json-schema. While at that this drops the "func" and "phy" clocks. The driver consumes clocks with those names, but it's not clear what are they for and they are not used in DT systems. "phy" is probably a clock for the sensor and it would belong in the sensor node. Signed-off-by:
-
Anson Huang authored
Convert the i.MX thermal binding to DT schema format using json-schema Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
-
Paul Cercueil authored
Convert the ingenic,jz4780-nand.txt doc file to ingenic,nand.yaml. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
-
Paul Cercueil authored
Convert the ingenic,jz4780-nemc.txt doc file to ingenic,nemc.yaml. The ingenic,jz4725b-nemc compatible string was added in the process, with a fallback to ingenic,jz4740-nemc. Signed-off-by:
-
Anson Huang authored
Convert the MXS GPIO binding to DT schema format using json-schema. Signed-off-by:
-
Geert Uytterhoeven authored
Document Device Tree bindings for the Renesas EMMA Mobile UART Interface. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Geert Uytterhoeven authored
Convert the Renesas DDR Bus Controller Device Tree binding documentation to json-schema. Drop referrals to driver behavior. Make power-domains required, as it is present for all current users. Update the example to match reality. Signed-off-by:
-
Geert Uytterhoeven authored
A generic GIC block embedded in an SoC may be connected to an on-SoC reset controller. Hence allow the DTS writer to describe this relation, by documenting the optional presence of a "reset" property. This gets rid of "make dtbs_check" warnings like: arch/arm/boot/dts/r8a7791-porter.dt.yaml: interrupt-controller@f1001000: 'resets' does not match any of the regexes: '^v2m@[0-9a-f]+$', 'pinctrl-[0-9]+' Signed-off-by:
-
