- 31 Jan, 2018 7 commits
-
-
Dan Carpenter authored
We wanted to exit the loop with "div" set to zero, but instead, if we don't hit the break then "div" is -1 when we finish the loop. It leads to an array underflow a few lines later. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Chad Dupuis authored
When a request times out we set the io_req flag BNX2FC_FLAG_IO_COMPL so that if a subsequent completion comes in on that task ID we will ignore it. The issue is that in the check for this flag there is a missing return so we will continue to process a request which may have already been returned to the ownership of the SCSI layer. This can cause unpredictable results. Solution is to add in the missing return. [mkp: typo plus title shortening] Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Tested-by:
-
Colin Ian King authored
The pointer ln is assigned a value that is never read, it is re-assigned a new value in the list_for_each loop hence the initialization is redundant and can be removed. Cleans up clang warning: drivers/scsi/csiostor/csio_lnode.c:117:21: warning: Value stored to 'ln' during its initialization is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Sujit Reddy Thumma authored
WRITE_SAME command is not supported by UFS. Enable a quirk for the upper level drivers to not send WRITE SAME command. [mkp: botched patch, applied by hand] Signed-off-by:
Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Asutosh Das <asutoshd@codeaurora.org> Signed-off-by:
-
Tyrel Datwyler authored
The fcp_rsp_info structure as defined in the FC spec has an initial 3 bytes reserved field. The ibmvfc driver mistakenly defined this field as 4 bytes resulting in the rsp_code field being defined in what should be the start of the second reserved field and thus always being reported as zero by the driver. Ideally, we should wire ibmvfc up with libfc for the sake of code deduplication, and ease of maintaining standardized structures in a single place. However, for now simply fixup the definition in ibmvfc for backporting to distros on older kernels. Wiring up with libfc will be done in a followup patch. Cc: <stable@vger.kernel.org> Reported-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Quinn Tran authored
This patch fixes memory corrpution while performing HBA Reset test. Following stack trace is seen: [ 466.397219] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 466.433669] IP: [<ffffffffc06f5dd0>] qlt_free_session_done+0x260/0x5f0 [qla2xxx] [ 466.467731] PGD 0 [ 466.476718] Oops: 0000 [#1] SMP Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by:
-
Tomas Henzl authored
cpu_msix_table is allocated to store online cpus, but pci_irq_get_affinity may return cpu_possible_mask which is then used to access cpu_msix_table. That causes bad user experience. Fix limits access to only online cpus, I've also added an additional test to protect from an unlikely change in cpu_online_mask. [mkp: checkpatch] Fixes: 1d55abc0 ("scsi: mpt3sas: switch to pci_alloc_irq_vectors") Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Acked-by:
Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
- 23 Jan, 2018 17 commits
-
-
Himanshu Madhani authored
Commit 3515832c ("scsi: qla2xxx: Reset the logo flag, after target re-login.")fixed the target re-login after session relogin is complete, but missed out the qlt_free_session_done() path. This patch clears send_els_logo flag in qlt_free_session_done() callback. [mkp: checkpatch] Fixes: 3515832c ("scsi: qla2xxx: Reset the logo flag, after target re-login.") Signed-off-by:
Himanshu Madhani <hmadhani@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
The arcmsr uses its own implementation of time_to_tm(), along with do_gettimeofday() to read the current time. While the algorithm used here is fine in principle, it suffers from two problems: - it assigns the seconds portion of the timeval to a 32-bit unsigned integer that overflows in 2106 even on 64-bit architectures. - do_gettimeofday() returns a time_t that overflows in 2038 on all 32-bit systems. This changes the time retrieval function to ktime_get_real_seconds(), which returns a proper 64-bit value, and replaces the open-coded time_to_tm() algorithm with a call to the safe time64_to_tm(). I checked way all numbers are indexed and found that months are given in range 0..11 while the days are in range 1..31, same as 'struct tm', but the year value that the firmware expects starts in 2000 while 'struct tm' is based on year 1900, so it needs a small adjustment. [mkp: checkpatch tweaks] Fixes: b416c099 ("scsi: arcmsr: Add a function to set date and time to firmware") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Ching Huang <ching2048@areca.com.tw> Signed-off-by:
-
Hannes Reinecke authored
Some older devices will return vendor specific sense codes, so we should be adding a definition for it. Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
Manish Rangankar authored
We get stuck in the loop when firmware sends a cqe response during connection recovery. Signed-off-by:
Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by:
-
Arnd Bergmann authored
While testing with the ARM specific memset() macro removed, I ran into a compiler warning that shows an old bug: drivers/scsi/arm/fas216.c: In function 'fas216_rq_sns_done': drivers/scsi/arm/fas216.c:2014:40: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess] It turns out that the definition of the scsi_cmd structure changed back in linux-2.6.25, so now we clear only four bytes (sizeof(pointer)) instead of 96 (SCSI_SENSE_BUFFERSIZE). I did not check whether we actually need to initialize the buffer here, but it's clear that if we do it, we should use the correct size. Fixes: de25deb1 ("[SCSI] use dynamically allocated sense buffer") Signed-off-by:
-
Christopher Díaz Riveros authored
Trivial fix removes unneeded semicolons after switch blocks. This issue was detected by using the Coccinelle software. Signed-off-by:
Christopher Díaz Riveros <chrisadr@gentoo.org> Acked-by:
-
Xiang Chen authored
When device gone, NULL pointer can be accessed in free_device callback if during SAS controller reset as we clear structure sas_dev prior. Actually we can only set dev_type as SAS_PHY_UNUSED and not clear structure sas_dev as all the members of structure sas_dev will be re-initialized after device found. Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Xiaofei Tan authored
This patch implements LED feature of directly attached disk for v2 hw. As libsas has provided an interface lldd_write_gpio() for this feature, we just need realise the interface following SPGIO API. We use an CPLD to finish the hardware part of this feature, and the base address of CPLD should be configured through ACPI or DT tables. Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
-
Xiaofei Tan authored
Add directly attached disk LED feature for v2 hw. Signed-off-by:
-
Shivasharan S authored
NVMe passthrough via MFI interface. Current MegaRAID product supports different types of encapsulation via the MFI framework. NVMe native command should be framed by application and it should be embedded in MFI as payload. The driver will provide interface to send the MFI frame along with the payload (in this case, payload is NVMe native command) to the firmware. Driver already has an existing, similar interface for SATA and SMP passthrough. 1. Driver will pass MFI command to the firmware if the latter supports NVMe encapsulated processing (not all SAS3.5 firmware supports this feature). 2. Driver exposes sysfs entry support_nvme_encapsulation. This is required for backward compatibility for applications using earlier driver versions that did not process IOCTL frames and could result in host hang. This is already fixed as part of commit 82add4e1 ("scsi: megaraid_sas: Incorrect processing of IOCTL frames for SMP/STP commands") [mkp: clarified commit message] Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by:
-
Arnd Bergmann authored
do_gettimeofday() overflows in 2038 on 32-bit architectures and is deprecated, so convert this driver to call ktime_get_real() directly. This also simplifies the calculation. Signed-off-by:
-
Arnd Bergmann authored
struct timespec is deprecated since it overflows in 2038 on 32-bit architectures, so we should use timespec64 consistently. I'm slightly adapting the format strings here, to make sure we print the nanoseconds with the correct number of leading zeroes. Signed-off-by:
Satish Kharat <satishkh@cisco.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
-
Xose Vazquez Perez authored
Replace "" with NULL for product revision level, and merge TEXEL duplicate entries. Cc: Hannes Reinecke <hare@suse.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
-
himanshu.madhani@cavium.com authored
Signed-off-by:
-
Anil Gurumurthy authored
Signed-off-by:
Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by:
-
Darren Trapp authored
[mkp: sparse warning] Signed-off-by:
Darren Trapp <darren.trapp@cavium.com> Signed-off-by:
-
- 17 Jan, 2018 12 commits
-
-
himanshu.madhani@cavium.com authored
This patch fixes following smatch warning: drivers/scsi/qla2xxx/qla_init.c:1054 __qla24xx_handle_gpdb_event() warn: inconsistent indenting Signed-off-by:
-
himanshu.madhani@cavium.com authored
This patch fixes following smatch warning: drivers/scsi/qla2xxx/qla_iocb.c:2622 qla2x00_els_dcmd2_sp_done() error: '%pC' expects argument of type 'struct clk*', argument 8 has type 'uchar[]' Signed-off-by:
-
himanshu.madhani@cavium.com authored
This patch fixes following Smatch warning: drivers/scsi/qla2xxx/qla_init.c:130 qla2x00_async_iocb_timeout() error: we previously assumed 'fcport' could be null (see line 107) Fixes: 5c25d451 ("scsi: qla2xxx: Fix NULL pointer access for fcport structure") Reported by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
himanshu.madhani@cavium.com authored
During error test case where switch port status is toggled from enable to disable, following stack trace is seen which indicates recursion trying to send terminate exchange. This regression was introduced by commit 82de802a ("scsi: qla2xxx: Preparation for Target MQ.") BUG: stack guard page was hit at ffffb96488383ff8 (stack is ffffb96488384000..ffffb96488387fff) BUG: stack guard page was hit at ffffb964886c3ff8 (stack is ffffb964886c4000..ffffb964886c7fff) kernel stack overflow (double-fault): 0000 [#1] SMP qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] Fixes: 82de802a ("scsi: qla2xxx: Preparation for Target MQ.") Cc: <stable@vger.kernel.org> #4.10 Signed-off-by:
-
himanshu.madhani@cavium.com authored
This patch fixes regression added by commit d7459527 ("scsi: qla2xxx: Add multiple queue pair functionality."). When driver is not able to get reqeusted IRQs from the system, driver will attempt tp clean up memory before failing hardware probe. During this cleanup, driver assigns NULL value to the pointer which has not been allocated by driver yet. This results in a NULL pointer access. Log file will show following message and stack trace qla2xxx [0000:a3:00.1]-00c7:21: MSI-X: Failed to enable support, giving up -- 32/-1. qla2xxx [0000:a3:00.1]-0037:21: Falling back-to MSI mode --1. qla2xxx [0000:a3:00.1]-003a:21: Failed to reserve interrupt 821 already in use. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffc010c4b6>] qla2x00_probe_one+0x18b6/0x2730 [qla2xxx] PGD 0 Oops: 0002 [#1] SMP Fixes: d7459527 ("scsi: qla2xxx: Add multiple queue pair functionality."). Cc: <stable@vger.kernel.org> # 4.10 Signed-off-by:
-
Colin Ian King authored
The pointer head is re-assigned the same value twice, so remove the second redundant assignment. Cleans up clang warning: drivers/message/fusion/mptsas.c:1161:20: warning: Value stored to 'head' during its initialization is never read Signed-off-by:
-
Dan Carpenter authored
We should set the error code if fc_remote_port_add() fails. Cc: <stable@vger.kernel.org> #v4.12+ Fixes: daf0cd44 ("scsi: storvsc: Add support for FC rport.") Signed-off-by:
Cathy Avery <cavery@redhat.com> Acked-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Andy Shevchenko authored
Numbers up to 100 snprintf() prints without using a division. Besides that the code looks more readable. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Colin Ian King authored
The function _get_st_from_smid is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol '_get_st_from_smid' was not declared. Should it be static? Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/scsi/hisi_sas/hisi_sas_main.c:1691:25: warning: symbol 'host_attrs' was not declared. Should it be static? Signed-off-by:
-
Douglas Gilbert authored
Introduce a state enum into sdebug_defer objects to indicate which, if any, defer method has been used with the associated command. Also add 2 bools to indicate which of the defer methods has been initialized. Those objects are re-used but the initialization only needs to be done once. This simplifies command cancellation handling. Now the delay associated with a deferred response of a command cannot be changed (once started) by changing the delay (and ndelay) parameters in sysfs. Command aborts and driver shutdown are still honoured immediately when received. [mkp: applied by hand] Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
-
Rasmus Villemoes authored
This saves a little .text and gets rid of the unmotivated line break and the sizeof(...) style inconsistency. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
- 11 Jan, 2018 4 commits
-
-
Shivasharan S authored
Signed-off-by:
-
Shivasharan S authored
No functional changes. This patch is a re-work of DCMD refire code to better manage all the different cases to decide whether to REFIRE or SKIP or COMPLETE certain DCMD. Signed-off-by:
-
Shivasharan S authored
Expose FW outstanding commands (fw_outstanding) through sysfs interface. This helps in debugging certain performance issues in the field. Signed-off-by:
Sasikumar Chandrasekaran <sasikumar.pc@broadcom.com> Signed-off-by:
-
Shivasharan S authored
Performance improvement: Current driver calls stream detection unconditionally for all IOs. Stream Detection logic is not required for most of the fast path IO. To improve performance, avoid stream detection logic and do it only if required. Below are the cases where stream detection is required in driver: 1. All non-FastPath IOs (IOs going to FW) 2. Fast Path reads sent to ReadAhead capable VDs. Signed-off-by:
-
