Pull media updates from Mauro Carvalho Chehab:

 - a new sensor driver for ov5675

 - a new platform driver for Allwinner A10 sensor interface

 - some new remote controller keymaps

 - some cosmetic changes at V4L2 core in order to avoid #ifdefs and to
   merge two core modules into one

 - removal of bcm2048 radio driver from staging

 - removal of davinci_vpfe video driver from staging

 - regression fix since Kernel 5.1 at the legacy VideoBuffer version 1
   core

 - added some documentation for remote controller protocols

 - pixel format documentation was split on two files

 - lots of other driver improvements and cleanups

* tag 'media/v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits)
  media: videobuf-core.c: poll_wait needs a non-NULL buf pointer
  media: sun4i: Make sun4i_csi_formats static
  media: imx: remove unused including <linux/version.h>
  media: stm32-dcmi: Delete an unnecessary of_node_put() call in dcmi_probe()
  media: pvrusb2: qctrl.flag will be uninitlaized if cx2341x_ctrl_query() returns error code
  media: em28xx: Fix exception handling in em28xx_alloc_urbs()
  media: don't do a 31 bit shift on a signed int
  media: use the BIT() macro
  media: ov9650: add a sanity check
  media: aspeed-video: address a protential usage of an unitialized var
  media: vicodec: make life easier for static analyzers
  media: remove include stdarg.h from some drivers
  v4l2-core: fix coding style for the two new c files
  media: v4l2-core: Remove BUG() from i2c and spi helpers
  media: v4l2-core: introduce a helper to unregister a i2c subdev
  media: v4l2-core: introduce a helper to unregister a spi subdev
  media: v4l2-core: move i2c helpers out of v4l2-common.c
  media: v4l2-core: move spi helpers out of v4l2-common.c
  media: v4l2-core: Module re-organization
  media: usbvision: Remove dead code
  ...

Pull sound updates from Takashi Iwai:
 "As shown in diffstat and logs, it was again a busy development cycle
  at this time, too. The most significant changes are still on-going
  refactoring / modernization works for ASoC core and drivers, but there
  are lots of other changes as well. Here we go, some highlights below:

  ASoC:

   - Quite a lot of cleanup / refactoring of ASoC core and APIs; most of
     them are systematic, but also including cleanups and modernization

   - A bulk of updates for some ASoC platforms, Freescale, sunxi and
     Intel SST/SOF

   - Initial support for Sound Open Firmware on i.MX8

   - Removal of deprecated w90x900 and nuc900 drivers

   - New support for Cirrus Logic CS47L15 and CS47L92, Freescale i.MX
     7ULP and 8MQ, Meson G12A and NXP UDA1334

  USB-audio:

   - More validations of descriptor units for hardening against bugs
     reported by fuzzers

   - PCM device assignment workaround for a past call-order change

   - Scarlett Gen2 mixer interface, a few more more quirks

  HD-audio:

   - Support for audio component with AMD/ATI and Nvidia HDMI codecs

   - Clean up HD-audio core and remove indirect access ops for Intel SOF

   - DMIC detection at probe; it would make systems automatically
     falling back to SST/SOF driver on devices that need DMIC handling.
     Needs a new Kconfig to set, and beware that it's still new and a
     bit experimental

  FireWire:

   - Lots of code refactoring and cleanups"

* tag 'sound-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (521 commits)
  ASoC: sdm845: remove unneeded semicolon
  ASoC: fsl_sai: Implement set_bclk_ratio
  ASoC: dmaengine: Replace strncpy() with strscpy_pad() for pcm->name
  ASoC: wcd9335: remove redundant use of ret variable
  ALSA: firewire-tascam: check intermediate state of clock status and retry
  ALSA: firewire-tascam: handle error code when getting current source of clock
  ASoC: hdmi-codec: Add an op to set callback function for plug event
  ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF
  ASoC: rt5677: Remove magic number register writes
  ASoC: soc-core: self contained soc_unbind_aux_dev()
  ASoC: soc-core: add soc_unbind_aux_dev()
  ASoC: soc-core: self contained soc_bind_aux_dev()
  ASoC: soc-core: move soc_probe_link_dais() next to soc_remove_link_dais()
  ASoC: soc-core: self contained soc_probe_link_dais()
  ASoC: soc-core: add new soc_link_init()
  ASoC: soc-core: move soc_probe_dai() next to soc_remove_dai()
  ASoC: soc-core: self contained soc_remove_link_dais()
  ASoC: soc-core: self contained soc_remove_link_components()
  ASoC: soc-core: self contained soc_probe_link_components()
  ASoC: rt1308: make array pd static const, makes object smaller
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fixup processing of SDIO IRQs during system suspend/resume
   - Add helper function to indicate if SDIO IRQs is enabled

  MMC host:
   - bcm2835: Take SWIOTLB memory size limitation into account
   - dw_mmc: Improve SDIO IRQs support
   - mtk-sd: Various improvements
   - mtk-sd: Improve SDIO IRQs support
   - sdhci-iproc: Add support for emmc2 of the BCM2711
   - sdhci-of-arasan: Add Support for Intel LGM eMMC
   - sdhci-of-aspeed: Add support for the ASPEED SD controller
   - sdhci-of-esdhc: Deal with erratum A011334 support in ls1028a 1.0 SoC
   - sdhci-pci: Prepare to add support of Genesys Logic GL975x
   - sdhci-pci: Add another Id for Intel CML
   - sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue
   - sunxi: Add support for H5 compatibles"

* tag 'mmc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
  ms_block: fix spelling mistake "randomally" -> "randomly"
  mmc: dw_mmc: hi3798cv200: make array degrees static const, makes object smaller
  mmc: sdhci: Convert to use sdio_irq_claimed()
  mmc: sdhci: Drop redundant code for SDIO IRQs
  mmc: sdhci: Drop redundant check in sdhci_ack_sdio_irq()
  mmc: core: Fixup processing of SDIO IRQs during system suspend/resume
  mmc: core: WARN if SDIO IRQs are enabled for non-powered card in suspend
  mmc: core: Clarify that the ->ack_sdio_irq() callback is mandatory
  mmc: core: Clarify sdio_irq_pending flag for MMC_CAP2_SDIO_IRQ_NOTHREAD
  mmc: core: Move code to get pending SDIO IRQs to a function
  mmc: mtk-sd: Re-store SDIO IRQs mask at system resume
  mmc: dw_mmc: Re-store SDIO IRQs mask at system resume
  mmc: core: Add helper function to indicate if SDIO IRQs is enabled
  mmc: sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue
  mmc: sdhci-pci-o2micro: Move functions in preparation to fix DLL lock phase shift issue
  mmc: sdhci-pci-o2micro: Change O2 Host PLL and DLL register name
  mmc: sdhci: Fix incorrect switch to HS mode
  mmc: sdhci-of-aspeed: Depend on CONFIG_OF_ADDRESS
  mmc: sdhci-of-aspeed: Allow max-frequency limitation of SDCLK
  mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock()
  ...

Pull block updates from Jens Axboe:

 - Two NVMe pull requests:
     - ana log parse fix from Anton
     - nvme quirks support for Apple devices from Ben
     - fix missing bio completion tracing for multipath stack devices
       from Hannes and Mikhail
     - IP TOS settings for nvme rdma and tcp transports from Israel
     - rq_dma_dir cleanups from Israel
     - tracing for Get LBA Status command from Minwoo
     - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
     - Some consolidation between the fabrics transports for handling
       the CAP register
     - reset race with ns scanning fix for fabrics (move fabrics
       commands to a dedicated request queue with a different lifetime
       from the admin request queue)."
     - controller reset and namespace scan races fixes
     - nvme discovery log change uevent support
     - naming improvements from Keith
     - multiple discovery controllers reject fix from James
     - some regular cleanups from various people

 - Series fixing (and re-fixing) null_blk debug printing and nr_devices
   checks (André)

 - A few pull requests from Song, with fixes from Andy, Guoqing,
   Guilherme, Neil, Nigel, and Yufen.

 - REQ_OP_ZONE_RESET_ALL support (Chaitanya)

 - Bio merge handling unification (Christoph)

 - Pick default elevator correctly for devices with special needs
   (Damien)

 - Block stats fixes (Hou)

 - Timeout and support devices nbd fixes (Mike)

 - Series fixing races around elevator switching and device add/remove
   (Ming)

 - sed-opal cleanups (Revanth)

 - Per device weight support for BFQ (Fam)

 - Support for blk-iocost, a new model that can properly account cost of
   IO workloads. (Tejun)

 - blk-cgroup writeback fixes (Tejun)

 - paride queue init fixes (zhengbin)

 - blk_set_runtime_active() cleanup (Stanley)

 - Block segment mapping optimizations (Bart)

 - lightnvm fixes (Hans/Minwoo/YueHaibing)

 - Various little fixes and cleanups

* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
  null_blk: format pr_* logs with pr_fmt
  null_blk: match the type of parameter nr_devices
  null_blk: do not fail the module load with zero devices
  block: also check RQF_STATS in blk_mq_need_time_stamp()
  block: make rq sector size accessible for block stats
  bfq: Fix bfq linkage error
  raid5: use bio_end_sector in r5_next_bio
  raid5: remove STRIPE_OPS_REQ_PENDING
  md: add feature flag MD_FEATURE_RAID0_LAYOUT
  md/raid0: avoid RAID0 data corruption due to layout confusion.
  raid5: don't set STRIPE_HANDLE to stripe which is in batch list
  raid5: don't increment read_errors on EILSEQ return
  nvmet: fix a wrong error status returned in error log page
  nvme: send discovery log page change events to userspace
  nvme: add uevent variables for controller devices
  nvme: enable aen regardless of the presence of I/O queues
  nvme-fabrics: allow discovery subsystems accept a kato
  nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
  nvme: Remove redundant assignment of cq vector
  nvme: Assign subsys instance from first ctrl
  ...

Pull libata updates from Jens Axboe:

 - Kill unused export (Andy)

 - Use dma_set_mask_and_coherent() throughout (Christoph)

 - Drop PCS quirk on Denverton, which has different register layout
   (Dan)

 - Support non-boot time detection for pata_buddha (Max)

* tag 'for-5.4/libata-2019-09-15' of git://git.kernel.dk/linux-block:
  libata/ahci: Drop PCS quirk for Denverton and beyond
  ahci: Do not export local variable ahci_em_messages
  libata: switch remaining drivers to use dma_set_mask_and_coherent
  sata_sil24: use dma_set_mask_and_coherent
  sata_qstor: use dma_set_mask_and_coherent
  sata_nv: use dma_set_mask_and_coherent
  sata_mv: use dma_set_mask_and_coherent
  pdc_adma: use dma_set_mask_and_coherent
  ahci: use dma_set_mask_and_coherent
  acard_ahci: use dma_set_mask_and_coherent
  ata/pata_buddha: Probe via modalias instead of initcall

Pull io_uring updates from Jens Axboe:

 - Allocate SQ/CQ ring together, more efficient. Expose this through a
   feature flag as well, so we can reduce the number of mmaps by 1
   (Hristo and me)

 - Fix for sequence logic with SQ thread (Jackie).

 - Add support for links with drain commands (Jackie).

 - Improved async merging (me)

 - Improved buffered async write performance (me)

 - Support SQ poll wakeup + event get in single io_uring_enter() (me)

 - Support larger SQ ring size. For epoll conversions, the 4k limit was
   too small for some prod workloads (Daniel).

 - put_user_page() usage (John)

* tag 'for-5.4/io_uring-2019-09-15' of git://git.kernel.dk/linux-block:
  io_uring: increase IORING_MAX_ENTRIES to 32K
  io_uring: make sqpoll wakeup possible with getevents
  io_uring: extend async work merging
  io_uring: limit parallelism of buffered writes
  io_uring: add io_queue_async_work() helper
  io_uring: optimize submit_and_wait API
  io_uring: add support for link with drain
  io_uring: fix wrong sequence setting logic
  io_uring: expose single mmap capability
  io_uring: allocate the two rings together
  fs/io_uring.c: convert put_page() to put_user_page*()

Pull documentation updates from Jonathan Corbet:
 "It's a somewhat calmer cycle for docs this time, as the churn of the
  mass RST conversion is happily mostly behind us.

   - A new document on reproducible builds.

   - We finally got around to zapping the documentation for hardware
     support that was removed in 2004; one doesn't want to rush these
     things.

   - The usual assortment of fixes, typo corrections, etc"

* tag 'docs-5.4' of git://git.lwn.net/linux: (67 commits)
  Documentation: kbuild: Add document about reproducible builds
  docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]
  Documentation: Add "earlycon=sbi" to the admin guide
  doc:lock: remove reference to clever use of read-write lock
  devices.txt: improve entry for comedi (char major 98)
  docs: mtd: Update spi nor reference driver
  doc: arm64: fix grammar dtb placed in no attributes region
  Documentation: sysrq: don't recommend 'S' 'U' before 'B'
  mailmap: Update email address for Quentin Perret
  docs: ftrace: clarify when tracing is disabled by the trace file
  docs: process: fix broken link
  Documentation/arm/samsung-s3c24xx: Remove stray U+FEFF character to fix title
  Documentation/arm/sa1100/assabet: Fix 'make assabet_defconfig' command
  Documentation/arm/sa1100: Remove some obsolete documentation
  docs/zh_CN: update Chinese howto.rst for latexdocs making
  Documentation: virt: Fix broken reference to virt tree's index
  docs: Fix typo on pull requests guide
  kernel-doc: Allow anonymous enum
  Documentation: sphinx: Don't parse socket() as identifier reference
  Documentation: sphinx: Add missing comma to list of strings
  ...

Pull percpu updates from Dennis Zhou:
 "A couple of updates to clean up the code with no change in behavior"

* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: Use struct_size() helper
  percpu: fix typo in pcpu_setup_first_chunk() comment
  percpu: Make pcpu_setup_first_chunk() void function

Pull cgroup updates from Tejun Heo:
 "Three minor cleanup patches"

* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  Use kvmalloc in cgroups-v1
  cgroup: minor tweak for logic to get cgroup css
  cgroup: Replace a seq_printf() call by seq_puts() in cgroup_print_ss_mask()

Pull asm-generic updates from Arnd Bergmann:
 "Here are three small cleanup patches for the include/asm-generic
  directory.

  Christoph removes the __ioremap as part of a cleanup, Nico improves
  the constant do_div() optimization, and Denis changes BUG_ON() to be
  consistent with other implementations"

* tag 'asm-generic-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: add unlikely to default BUG_ON(x)
  __div64_const32(): improve the generic C version
  asm-generic: don't provide __ioremap

Pull Xtensa updates from Max Filippov:

 - add support for xtensa call0 ABI in userspace

 - update xtensa virt board DTS for PCI root complex in KIO range

 - remove free_initrd_mem

* tag 'xtensa-20190917' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: virt: move PCI root complex to KIO range
  xtensa: add support for call0 ABI in userspace
  xtensa: clean up PS_WOE_BIT usage
  xtensa: remove free_initrd_mem

Pull s390 updates from Vasily Gorbik:

 - Add support for IBM z15 machines.

 - Add SHA3 and CCA AES cipher key support in zcrypt and pkey
   refactoring.

 - Move to arch_stack_walk infrastructure for the stack unwinder.

 - Various kasan fixes and improvements.

 - Various command line parsing fixes.

 - Improve decompressor phase debuggability.

 - Lift no bss usage restriction for the early code.

 - Use refcount_t for reference counters for couple of places in mm
   code.

 - Logging improvements and return code fix in vfio-ccw code.

 - Couple of zpci fixes and minor refactoring.

 - Remove some outdated documentation.

 - Fix secure boot detection.

 - Other various minor code clean ups.

* tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
  s390: remove pointless drivers-y in drivers/s390/Makefile
  s390/cpum_sf: Fix line length and format string
  s390/pci: fix MSI message data
  s390: add support for IBM z15 machines
  s390/crypto: Support for SHA3 via CPACF (MSA6)
  s390/startup: add pgm check info printing
  s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding
  vfio-ccw: fix error return code in vfio_ccw_sch_init()
  s390: vfio-ap: fix warning reset not completed
  s390/base: remove unused s390_base_mcck_handler
  s390/sclp: Fix bit checked for has_sipl
  s390/zcrypt: fix wrong handling of cca cipher keygenflags
  s390/kasan: add kdump support
  s390/setup: avoid using strncmp with hardcoded length
  s390/sclp: avoid using strncmp with hardcoded length
  s390/module: avoid using strncmp with hardcoded length
  s390/pci: avoid using strncmp with hardcoded length
  s390/kaslr: reserve memory for kasan usage
  s390/mem_detect: provide single get_mem_detect_end
  s390/cmma: reuse kstrtobool for option value parsing
  ...

Pull OpenRISC updates from Stafford Horne:
 "Few small things for 5.4:

   - Fixup ethoc ethernet device tree descriptors which were previously
     broken, now ethernet works on FPGAs running OpenRISC!

   - Switch ioremap to use uncached semantics - from Christoph Hellwig"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: map as uncached in ioremap
  or1k: dts: Add ethoc device to SMP devicetree
  or1k: dts: Fix ethoc network configuration in or1ksim devicetree

Pull m68knommu fix from Greg Ungerer:
 "Only a single change, fix up header include in ColdFire specific GPIO
  handling code"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: coldfire: Include the GPIO driver header

Pull core timer updates from Thomas Gleixner:
 "Timers and timekeeping updates:

   - A large overhaul of the posix CPU timer code which is a preparation
     for moving the CPU timer expiry out into task work so it can be
     properly accounted on the task/process.

     An update to the bogus permission checks will come later during the
     merge window as feedback was not complete before heading of for
     travel.

   - Switch the timerqueue code to use cached rbtrees and get rid of the
     homebrewn caching of the leftmost node.

   - Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
     single function

   - Implement the separation of hrtimers to be forced to expire in hard
     interrupt context even when PREEMPT_RT is enabled and mark the
     affected timers accordingly.

   - Implement a mechanism for hrtimers and the timer wheel to protect
     RT against priority inversion and live lock issues when a (hr)timer
     which should be canceled is currently executing the callback.
     Instead of infinitely spinning, the task which tries to cancel the
     timer blocks on a per cpu base expiry lock which is held and
     released by the (hr)timer expiry code.

   - Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
     resulting in faster access to timekeeping functions.

   - Updates to various clocksource/clockevent drivers and their device
     tree bindings.

   - The usual small improvements all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
  posix-cpu-timers: Fix permission check regression
  posix-cpu-timers: Always clear head pointer on dequeue
  hrtimer: Add a missing bracket and hide `migration_base' on !SMP
  posix-cpu-timers: Make expiry_active check actually work correctly
  posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
  tick: Mark sched_timer to expire in hard interrupt context
  hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
  x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
  posix-cpu-timers: Utilize timerqueue for storage
  posix-cpu-timers: Move state tracking to struct posix_cputimers
  posix-cpu-timers: Deduplicate rlimit handling
  posix-cpu-timers: Remove pointless comparisons
  posix-cpu-timers: Get rid of 64bit divisions
  posix-cpu-timers: Consolidate timer expiry further
  posix-cpu-timers: Get rid of zero checks
  rlimit: Rewrite non-sensical RLIMIT_CPU comment
  posix-cpu-timers: Respect INFINITY for hard RTTIME limit
  posix-cpu-timers: Switch thread group sampling to array
  posix-cpu-timers: Restructure expiry array
  posix-cpu-timers: Remove cputime_expires
  ...

Pull x86 apic updates from Thomas Gleixner:

 - Cleanup the apic IPI implementation by removing duplicated code and
   consolidating the functions into the APIC core.

 - Implement a safe variant of the IPI broadcast mode. Contrary to
   earlier attempts this uses the core tracking of which CPUs have been
   brought online at least once so that a broadcast does not end up in
   some dead end in BIOS/SMM code when the CPU is still waiting for
   init. Once all CPUs have been brought up once, IPI broadcasting is
   enabled. Before that regular one by one IPIs are issued.

 - Drop the paravirt CR8 related functions as they have no user anymore

 - Initialize the APIC TPR to block interrupt 16-31 as they are reserved
   for CPU exceptions and should never be raised by any well behaving
   device.

 - Emit a warning when vector space exhaustion breaks the admin set
   affinity of an interrupt.

 - Make sure to use the NMI fallback when shutdown via reboot vector IPI
   fails. The original code had conditions which prevent the code path
   to be reached.

 - Annotate various APIC config variables as RO after init.

[ The ipi broadcase change came in earlier through the cpu hotplug
  branch, but I left the explanation in the commit message since it was
  shared between the two different branches    - Linus ]

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  x86/apic/vector: Warn when vector space exhaustion breaks affinity
  x86/apic: Annotate global config variables as "read-only after init"
  x86/apic/x2apic: Implement IPI shorthands support
  x86/apic/flat64: Remove the IPI shorthand decision logic
  x86/apic: Share common IPI helpers
  x86/apic: Remove the shorthand decision logic
  x86/smp: Enhance native_send_call_func_ipi()
  x86/smp: Move smp_function_call implementations into IPI code
  x86/apic: Provide and use helper for send_IPI_allbutself()
  x86/apic: Add static key to Control IPI shorthands
  x86/apic: Move no_ipi_broadcast() out of 32bit
  x86/apic: Add NMI_VECTOR wait to IPI shorthand
  x86/apic: Remove dest argument from __default_send_IPI_shortcut()
  x86/hotplug: Silence APIC and NMI when CPU is dead
  x86/cpu: Move arch_smt_update() to a neutral place
  x86/apic/uv: Make x2apic_extra_bits static
  x86/apic: Consolidate the apic local headers
  x86/apic: Move apic_flat_64 header into apic directory
  x86/apic: Move ipi header into apic directory
  x86/apic: Cleanup the include maze
  ...

Pull core irq updates from Thomas Gleixner:
 "Updates from the irq departement:

   - Update the interrupt spreading code so it handles numa node with
     different CPU counts properly.

   - A large overhaul of the ARM GiCv3 driver to support new PPI and SPI
     ranges.

   - Conversion of all alloc_fwnode() users to use physical addresses
     instead of virtual addresses so the virtual addresses are not
     leaked. The physical address is sufficient to identify the
     associated interrupt chip.

   - Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips.

   - Enforce interrupt threading at compile time if RT is enabled.

   - Small updates and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices
  irqchip/uniphier-aidet: Use devm_platform_ioremap_resource()
  irqdomain: Add the missing assignment of domain->fwnode for named fwnode
  irqchip/mmp: Coexist with GIC root IRQ controller
  irqchip/mmp: Mask off interrupts from other cores
  irqchip/mmp: Add missing chained_irq_{enter,exit}()
  irqchip/mmp: Do not use of_address_to_resource() to get mux regs
  irqchip/meson-gpio: Add support for meson sm1 SoCs
  dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs
  genirq/affinity: Remove const qualifier from node_to_cpumask argument
  genirq/affinity: Spread vectors on node according to nr_cpu ratio
  genirq/affinity: Improve __irq_build_affinity_masks()
  irqchip: Remove dev_err() usage after platform_get_irq()
  irqchip: Add include guard to irq-partition-percpu.h
  irqchip/mmp: Do not call irq_set_default_host() on DT platforms
  irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map
  irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803
  irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks
  irqchip/gic-v3: Warn about inconsistent implementations of extended ranges
  irqchip/gic-v3: Add EPPI range support
  ...

Pull x86 interrupt updates from Thomas Gleixner:
 "A small set of changes to simplify and improve the interrupt handling
  in do_IRQ() by moving the common case into common code and thereby
  cleaning it up"

* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Check for VECTOR_UNUSED directly
  x86/irq: Move IS_ERR_OR_NULL() check into common do_IRQ() code
  x86/irq: Improve definition of VECTOR_SHUTDOWN et al

Pull x86 pti updates from Thomas Gleixner:
 "Two small PTI updates:

   - Handle unaligned addresses gracefully in pti_clone_pagetable(). Not
     an issue with current callers, but a correctness problem. Adds a
     warning so any caller which hands in an unaligned address gets
     pointed out clearly.

   - Prevent PTI functions from being invoked when PTI is disabled at
     boottime. While this does not cause any harm today, it's pointless
     code executed and prone to cause subtle issues if the PTI
     implementation changes internally over time"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/pti: Do not invoke PTI functions when PTI is disabled
  x86/mm/pti: Handle unaligned address gracefully in pti_clone_pagetable()

Pull CPU hotplug updates from Thomas Gleixner:
 "A small update for the SMP hotplug code code:

   - Track "booted once" CPUs in a cpumask so the x86 APIC code has an
     easy way to decide whether broadcast IPIs are safe to use or not.

   - Implement a cpumask_or_equal() helper for the IPI broadcast
     evaluation.

     The above two changes have been also pulled into the x86/apic
     branch for implementing the conditional IPI broadcast feature.

   - Cache the number of online CPUs instead of reevaluating it over and
     over. num_online_cpus() is an unreliable snapshot anyway except
     when it is used outside a cpu hotplug locked region. The cached
     access is not changing this, but it's definitely faster than
     calculating the bitmap wheight especially in hot paths"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Cache number of online CPUs
  cpumask: Implement cpumask_or_equal()
  smp/hotplug: Track booted once CPUs in a cpumask

Pull timer fix from Thomas Gleixner:
 "A single fix to prevent the alarm timer code from returning ENOTSUPP
  to user space.

  ENOTSUPP is a purely kernel internal error code related to NFSv3 and
  should never be handed back to user space. The risk for ABI breakage
  is low as the number of systems which do not have a working RTC is
  very limited"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Use EOPNOTSUPP instead of ENOTSUPP

Pull x86 platform-drivers updates from Andy Shevchenko:

 - ASUS WMI driver got a couple of updates, i.e. support of FAN is fixed
   for recent products and the charge threshold support has been added

 - Two uknown key events for Dell laptops are being ignored now to avoid
   spamming users with harmless messages

 - HP ZBook 17 G5 and ASUS Zenbook UX430UNR got accelerometer support.

 - Intel CherryTrail platforms had a regression with wake up. Now it's
   fixed

 - Intel PMC driver got fixed in order to work nicely in Xen
   environment

 - Intel Speed Select driver provides bucket vs core count relationship.
   Besides that the tools has been updated for better output

 - The PrivacyGuard is enabled on Lenovo ThinkPad laptops

 - Three tablets - Trekstor Primebook C11B 2-in-1, Irbis TW90 and Chuwi
   Surbook Mini - got touchscreen support

* tag 'platform-drivers-x86-v5.4-1' of git://git.infradead.org/linux-platform-drivers-x86: (53 commits)
  MAINTAINERS: Switch PDx86 subsystem status to Odd Fixes
  platform/x86: asus-wmi: Refactor charge threshold to use the battery hooking API
  platform/x86: asus-wmi: Rename CHARGE_THRESHOLD to RSOC
  platform/x86: asus-wmi: Reorder ASUS_WMI_CHARGE_THRESHOLD
  tools/power/x86/intel-speed-select: Display core count for bucket
  platform/x86: ISST: Allow additional TRL MSRs
  tools/power/x86/intel-speed-select: Fix memory leak
  tools/power/x86/intel-speed-select: Output success/failed for command output
  tools/power/x86/intel-speed-select: Output human readable CPU list
  tools/power/x86/intel-speed-select: Change turbo ratio output to maximum turbo frequency
  tools/power/x86/intel-speed-select: Switch output to MHz
  tools/power/x86/intel-speed-select: Simplify output for turbo-freq and base-freq
  tools/power/x86/intel-speed-select: Fix cpu-count output
  tools/power/x86/intel-speed-select: Fix help option typo
  tools/power/x86/intel-speed-select: Fix package typo
  tools/power/x86/intel-speed-select: Fix a read overflow in isst_set_tdp_level_msr()
  platform/x86: intel_int0002_vgpio: Use device_init_wakeup
  platform/x86: intel_int0002_vgpio: Fix wakeups not working on Cherry Trail
  platform/x86: compal-laptop: Initialize "value" in ec_read_u8()
  platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11B 2-in-1
  ...

Pull x86 vmware updates from Ingo Molnar:
 "This updates the VMWARE guest driver with support for VMCALL/VMMCALL
  based hypercalls"

* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  input/vmmouse: Update the backdoor call with support for new instructions
  drm/vmwgfx: Update the backdoor call with support for new instructions
  x86/vmware: Add a header file for hypercall definitions
  x86/vmware: Update platform detection code for VMCALL/VMMCALL hypercalls

Pull x86 hyperv updates from Ingo Molnar:
 "Misc updates related to page size abstractions within the HyperV code,
  in preparation for future features"

* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  drivers: hv: vmbus: Replace page definition with Hyper-V specific one
  x86/hyperv: Add functions to allocate/deallocate page for Hyper-V
  x86/hyperv: Create and use Hyper-V page definitions

Pull x86 platform update from Ingo Molnar:
 "The biggest change is the rework of the intel/iosf_mbi locking code
  which used a few non-standard locking patterns, to make it work under
  lockdep"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Fix kmalloc() NULL check routine
  x86/platform/intel/iosf_mbi Rewrite locking

Pull x86 mm updates from Ingo Molnar:

 - Make cpumask_of_node() more robust against invalid node IDs

 - Simplify and speed up load_mm_cr4()

 - Unexport and remove various unused set_memory_*() APIs

 - Misc cleanups

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix cpumask_of_node() error condition
  x86/mm: Remove the unused set_memory_wt() function
  x86/mm: Remove set_pages_x() and set_pages_nx()
  x86/mm: Remove the unused set_memory_array_*() functions
  x86/mm: Unexport set_memory_x() and set_memory_nx()
  x86/fixmap: Cleanup outdated comments
  x86/kconfig: Remove X86_DIRECT_GBPAGES dependency on !DEBUG_PAGEALLOC
  x86/mm: Avoid redundant interrupt disable in load_mm_cr4()

Pull x86 entry updates from Ingo Molnar:
 "This contains x32 and compat syscall improvements, the biggest one of
  which splits x32 syscalls into their own table, which allows new
  syscalls to share the x32 and x86-64 number - which turns the
  512-547 special syscall numbers range into a legacy wart that won't be
  extended going forward"

* 'x86-entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/syscalls: Split the x32 syscalls into their own table
  x86/syscalls: Disallow compat entries for all types of 64-bit syscalls
  x86/syscalls: Use the compat versions of rt_sigsuspend() and rt_sigprocmask()
  x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long

Pull x86 cpu-feature updates from Ingo Molnar:

 - Rework the Intel model names symbols/macros, which were decades of
   ad-hoc extensions and added random noise. It's now a coherent, easy
   to follow nomenclature.

 - Add new Intel CPU model IDs:
    - "Tiger Lake" desktop and mobile models
    - "Elkhart Lake" model ID
    - and the "Lightning Mountain" variant of Airmont, plus support code

 - Add the new AVX512_VP2INTERSECT instruction to cpufeatures

 - Remove Intel MPX user-visible APIs and the self-tests, because the
   toolchain (gcc) is not supporting it going forward. This is the
   first, lowest-risk phase of MPX removal.

 - Remove X86_FEATURE_MFENCE_RDTSC

 - Various smaller cleanups and fixes

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  x86/cpu: Update init data for new Airmont CPU model
  x86/cpu: Add new Airmont variant to Intel family
  x86/cpu: Add Elkhart Lake to Intel family
  x86/cpu: Add Tiger Lake to Intel family
  x86: Correct misc typos
  x86/intel: Add common OPTDIFFs
  x86/intel: Aggregate microserver naming
  x86/intel: Aggregate big core graphics naming
  x86/intel: Aggregate big core mobile naming
  x86/intel: Aggregate big core client naming
  x86/cpufeature: Explain the macro duplication
  x86/ftrace: Remove mcount() declaration
  x86/PCI: Remove superfluous returns from void functions
  x86/msr-index: Move AMD MSRs where they belong
  x86/cpu: Use constant definitions for CPU models
  lib: Remove redundant ftrace flag removal
  x86/crash: Remove unnecessary comparison
  x86/bitops: Use __builtin_constant_p() directly instead of IS_IMMEDIATE()
  x86: Remove X86_FEATURE_MFENCE_RDTSC
  x86/mpx: Remove MPX APIs
  ...

Pull x86 build cleanup from Ingo Molnar:
 "A single change that removes unnecessary asm-generic wrappers"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Remove unneeded uapi asm-generic wrappers

Pull x86 boot code cleanup from Ingo Molnar:
 "Clean up the BUILD_BUG_ON() definition which can cause build warnings"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Use common BUILD_BUG_ON

Pull x86 asm updates from Ingo Molnar:

 - Add UMIP emulation/spoofing for 64-bit processes as well, because of
   Wine based gaming.

 - Clean up symbols/labels in low level asm code

 - Add an assembly optimized mul_u64_u32_div() implementation on x86-64.

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/umip: Add emulation (spoofing) for UMIP covered instructions in 64-bit processes as well
  x86/asm: Make some functions local labels
  x86/asm/suspend: Get rid of bogus_64_magic
  x86/math64: Provide a sane mul_u64_u32_div() implementation for x86_64

Pull scheduler updates from Ingo Molnar:

 - MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and
   Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann,
   Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers.

   As perf and the scheduler is getting bigger and more complex,
   document the status quo of current responsibilities and interests,
   and spread the review pain^H^H^H^H fun via an increase in the Cc:
   linecount generated by scripts/get_maintainer.pl. :-)

 - Add another series of patches that brings the -rt (PREEMPT_RT) tree
   closer to mainline: split the monolithic CONFIG_PREEMPT dependencies
   into a new CONFIG_PREEMPTION category that will allow the eventual
   introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches
   to go though.

 - Extend the CPU cgroup controller with uclamp.min and uclamp.max to
   allow the finer shaping of CPU bandwidth usage.

 - Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS).

 - Improve the behavior of high CPU count, high thread count
   applications running under cpu.cfs_quota_us constraints.

 - Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present.

 - Improve CPU isolation housekeeping CPU allocation NUMA locality.

 - Fix deadline scheduler bandwidth calculations and logic when cpusets
   rebuilds the topology, or when it gets deadline-throttled while it's
   being offlined.

 - Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from
   setscheduler() system calls without creating global serialization.
   Add new synchronization between cpuset topology-changing events and
   the deadline acceptance tests in setscheduler(), which were broken
   before.

 - Rework the active_mm state machine to be less confusing and more
   optimal.

 - Rework (simplify) the pick_next_task() slowpath.

 - Improve load-balancing on AMD EPYC systems.

 - ... and misc cleanups, smaller fixes and improvements - please see
   the Git log for more details.

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  sched/psi: Correct overly pessimistic size calculation
  sched/fair: Speed-up energy-aware wake-ups
  sched/uclamp: Always use 'enum uclamp_id' for clamp_id values
  sched/uclamp: Update CPU's refcount on TG's clamp changes
  sched/uclamp: Use TG's clamps to restrict TASK's clamps
  sched/uclamp: Propagate system defaults to the root group
  sched/uclamp: Propagate parent clamps
  sched/uclamp: Extend CPU's cgroup controller
  sched/topology: Improve load balancing on AMD EPYC systems
  arch, ia64: Make NUMA select SMP
  sched, perf: MAINTAINERS update, add submaintainers and reviewers
  sched/fair: Use rq_lock/unlock in online_fair_sched_group
  cpufreq: schedutil: fix equation in comment
  sched: Rework pick_next_task() slow-path
  sched: Allow put_prev_task() to drop rq->lock
  sched/fair: Expose newidle_balance()
  sched: Add task_struct pointer to sched_class::set_curr_task
  sched: Rework CPU hotplug task selection
  sched/{rt,deadline}: Fix set_next_task vs pick_next_task
  sched: Fix kerneldoc comment for ia64_set_curr_task
  ...

Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - Improved kbprobes robustness

   - Intel PEBS support for PT hardware tracing

   - Other Intel PT improvements: high order pages memory footprint
     reduction and various related cleanups

   - Misc cleanups

  The perf tooling side has been very busy in this cycle, with over 300
  commits. This is an incomplete high-level summary of the many
  improvements done by over 30 developers:

   - Lots of updates to the following tools:

      'perf c2c'
      'perf config'
      'perf record'
      'perf report'
      'perf script'
      'perf test'
      'perf top'
      'perf trace'

   - Updates to libperf and libtraceevent, and a consolidation of the
     proliferation of x86 instruction decoder libraries.

   - Vendor event updates for Intel and PowerPC CPUs,

   - Updates to hardware tracing tooling for ARM and Intel CPUs,

   - ... and lots of other changes and cleanups - see the shortlog and
     Git log for details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (322 commits)
  kprobes: Prohibit probing on BUG() and WARN() address
  perf/x86: Make more stuff static
  x86, perf: Fix the dependency of the x86 insn decoder selftest
  objtool: Ignore intentional differences for the x86 insn decoder
  objtool: Update sync-check.sh from perf's check-headers.sh
  perf build: Ignore intentional differences for the x86 insn decoder
  perf intel-pt: Use shared x86 insn decoder
  perf intel-pt: Remove inat.c from build dependency list
  perf: Update .gitignore file
  objtool: Move x86 insn decoder to a common location
  perf metricgroup: Support multiple events for metricgroup
  perf metricgroup: Scale the metric result
  perf pmu: Change convert_scale from static to global
  perf symbols: Move mem_info and branch_info out of symbol.h
  perf auxtrace: Uninline functions that touch perf_session
  perf tools: Remove needless evlist.h include directives
  perf tools: Remove needless evlist.h include directives
  perf tools: Remove needless thread_map.h include directives
  perf tools: Remove needless thread.h include directives
  perf tools: Remove needless map.h include directives
  ...

Pull locking updates from Ingo Molnar:

 - improve rwsem scalability

 - add uninitialized rwsem debugging check

 - reduce lockdep's stacktrace memory usage and add diagnostics

 - misc cleanups, code consolidation and constification

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Fix up mutex_waiter usage
  locking/mutex: Use mutex flags macro instead of hard code
  locking/mutex: Make __mutex_owner static to mutex.c
  locking/qspinlock,x86: Clarify virt_spin_lock_key
  locking/rwsem: Check for operations on an uninitialized rwsem
  locking/rwsem: Make handoff writer optimistically spin on owner
  locking/lockdep: Report more stack trace statistics
  locking/lockdep: Reduce space occupied by stack traces
  stacktrace: Constify 'entries' arguments
  locking/lockdep: Make it clear that what lock_class::key points at is not modified

Pull EFI updates from Ingo Molnar:

 - refactor the EFI config table handling across architectures

 - add support for the Dell EMC OEM config table

 - include AER diagnostic output to CPER handling of fatal PCIe errors

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: cper: print AER info of PCIe fatal error
  efi: Export Runtime Configuration Interface table to sysfs
  efi: ia64: move SAL systab handling out of generic EFI code
  efi/x86: move UV_SYSTAB handling into arch/x86
  efi: x86: move efi_is_table_address() into arch/x86

Pull stacktrace fixlet from Ingo Molnar:
 "Two comment fixes"

* 'core-stacktrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lib/stackdepot: Fix outdated comments

Pull RCU updates from Ingo Molnar:
 "This cycle's RCU changes were:

   - A few more RCU flavor consolidation cleanups.

   - Updates to RCU's list-traversal macros improving lockdep usability.

   - Forward-progress improvements for no-CBs CPUs: Avoid ignoring
     incoming callbacks during grace-period waits.

   - Forward-progress improvements for no-CBs CPUs: Use ->cblist
     structure to take advantage of others' grace periods.

   - Also added a small commit that avoids needlessly inflicting
     scheduler-clock ticks on callback-offloaded CPUs.

   - Forward-progress improvements for no-CBs CPUs: Reduce contention on
     ->nocb_lock guarding ->cblist.

   - Forward-progress improvements for no-CBs CPUs: Add ->nocb_bypass
     list to further reduce contention on ->nocb_lock guarding ->cblist.

   - Miscellaneous fixes.

   - Torture-test updates.

   - minor LKMM updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (86 commits)
  MAINTAINERS: Update from paulmck@linux.ibm.com to paulmck@kernel.org
  rcu: Don't include <linux/ktime.h> in rcutiny.h
  rcu: Allow rcu_do_batch() to dynamically adjust batch sizes
  rcu/nocb: Don't wake no-CBs GP kthread if timer posted under overload
  rcu/nocb: Reduce __call_rcu_nocb_wake() leaf rcu_node ->lock contention
  rcu/nocb: Reduce nocb_cb_wait() leaf rcu_node ->lock contention
  rcu/nocb: Advance CBs after merge in rcutree_migrate_callbacks()
  rcu/nocb: Avoid synchronous wakeup in __call_rcu_nocb_wake()
  rcu/nocb: Print no-CBs diagnostics when rcutorture writer unduly delayed
  rcu/nocb: EXP Check use and usefulness of ->nocb_lock_contended
  rcu/nocb: Add bypass callback queueing
  rcu/nocb: Atomic ->len field in rcu_segcblist structure
  rcu/nocb: Unconditionally advance and wake for excessive CBs
  rcu/nocb: Reduce ->nocb_lock contention with separate ->nocb_gp_lock
  rcu/nocb: Reduce contention at no-CBs invocation-done time
  rcu/nocb: Reduce contention at no-CBs registry-time CB advancement
  rcu/nocb: Round down for number of no-CBs grace-period kthreads
  rcu/nocb: Avoid ->nocb_lock capture by corresponding CPU
  rcu/nocb: Avoid needless wakeups of no-CBs grace-period kthread
  rcu/nocb: Make __call_rcu_nocb_wake() safe for many callbacks
  ...

Pull objtool build fix from Ingo Molnar:
 "Fix objtool builds with more exotic, user-defined CFLAGS"

* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Clobber user CFLAGS variable

Pull header documentation fix from Ingo Molnar:
 "Fix the parameter description <asm-generic/div64.h>"

* 'core-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  asm-generic/div64: Fix documentation of do_div() parameter

Pull ARM DT updates from Arnd Bergmann:
 "This is another huge branch with close to 450 changessets related to
  devicetree files, roughly half of this for 32-bit and 64-bit
  respectively. There are lots of cleanups and additional hardware
  support for platforms we already support based on SoCs from Renesas,
  ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and
  other manufacturers.

  A total of 6 new SoCs and 37 new boards gets added this time, one more
  SoC will come in a follow-up branch. Most of the new boards are for
  64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.

  Going more into details for SoC platforms with new hardware support:

   - The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone
     platform, usually paired with an external 5G modem. So far we only
     support the Qualcomm SM8150 MTP reference platform, but no actual
     products.

   - For the slightly older Qualcomm platforms, support for several
     interesting products is getting added: Three laptops based on
     Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix
     630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630)
     and several phones based on the older Snapdragon 410/MSM8916
     (Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed"
     aka Wileyfox Swift).

   - Mediatek MT7629 is a new wireless network router chip, similar to
     the older MT7623. It gets added together with the reference board
     implementation.

   - Allwinner V3 is a repackaged version of the existing low-end V3s
     chip, and is used in the tiny Lichee Pi Zero plus, also added here.
     There is also a new TV set-top box based on Allwinner H6, the Tanix
     TX6, and the eMMC variant of the Olimex A64-Olinuxino development
     board.

   - NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC
     family, similar to the i.MX8M Mini. As usual, there is a large
     number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML,
     SolidRun Hummingboard Pulse baseboard and System-on-Module,
     Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion
     PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the
     Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
     phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
     Innovations i.MX7 RMU2 board.

   - In a different NXP product line, the Layerscape LS1046A "Freeway"
     reference board gets added.

   - Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from
     their set-top-box line and smart speaker with newer CPU and GPU
     cores compared to their predecessors. Both are now also supported
     by the Khadas VIM3 development board series, and the dts files for
     that get reorganized a bit to better deal with all variants.
     Another board based on SM1 that gets added is the SEI Robotics
     SEI610.

   - There are a handful of new x86 and Power9 server boards using
     Aspeed BMC chips that are gaining support for running Linux on the
     BMC through the OpenBMC project: Facebook
     Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably
     these are still new machines using SoCs based on the ARM9 and ARM11
     CPU cores, as support for the new Cortex-A7 based AST2600 is still
     ramping up.

   - There are three new end-user products using 32-bit Rockchips SoCs:
     Mecer Xtreme Mini S6 is an Android "mini PC" box based on the
     low-end RK3229 chip, while the two AOpen products Chromebox Mini
     (Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for
     commercial settings(digital signage, PoS, ...).

   - One more single-board computer based on the popular 64-bit RK3399
     is added: the Leez RK3399 P710"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits)
  arm64: dts: qcom: Add Lenovo Yoga C630
  ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
  ARM; dts: aspeed: mihawk: File should not be executable
  ARM: dts: aspeed: swift: Change power supplies to version 2
  ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
  ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
  ARM: dts: aspeed-g4: Add all flash chips
  ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
  ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
  ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
  ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
  ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
  ARM: dts: exynos: Remove not accurate secondary ADC compatible
  arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
  arm64: dts: meson-sm1-sei610: add stdout-path property back
  arm64: dts: meson-sm1-sei610: enable DVFS
  arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
  dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
  arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
  arm64: dts: meson: g12a: add reset to tdm formatters
  ...