Commits · e762bb891a294af00b83f54062dae4e24565edf8 · Kirill Smelkov / linux

13 Oct, 2018 26 commits

powerpc/eeh: Cleanup eeh_pe_state_mark() · e762bb89

Sam Bobroff authored Sep 12, 2018

Currently, eeh_pe_state_mark() marks a PE (and it's children) with a
state and then performs additional processing if that state included
EEH_PE_ISOLATED.

The state parameter is always a constant at the call site, so
rearrange eeh_pe_state_mark() into two functions and just call the
appropriate one at each site.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

e762bb89

powerpc/eeh: Cleanup unnecessary eeh_pe_state_mark_with_cfg() · eed4bdbe

Sam Bobroff authored Sep 12, 2018

The function eeh_pe_state_mark_with_cfg() just performs the work of
eeh_pe_state_mark() and then, conditionally, the work of
eeh_pe_state_clear(). However it is only ever called with a constant
state such that the condition is always true, so replace it by direct
calls.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

eed4bdbe

powerpc/eeh: Cleanup eeh_enabled() · 54644927

Sam Bobroff authored Sep 12, 2018

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

54644927

powerpc/eeh: Cleanup logic in eeh_rmv_from_parent_pe() · 9a3eda26

Sam Bobroff authored Sep 12, 2018

Move the call to eeh_dev_to_pe() up, so that later it's clear that
"pe" isn't NULL.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

9a3eda26

powerpc/eeh: Cleanup field names in eeh_rmv_data · 1c5c533b

Sam Bobroff authored Sep 12, 2018

Change the name of the fields in eeh_rmv_data to clarify their usage.

Change "edev_list" to "removed_vf_list" because it does not contain
generic edevs, but rather only edevs that contain virtual functions
(which need to be removed during recovery).

Similarly, change "removed" to "removed_dev_count" because it is a
count of any removed devices, not just those in the above list.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1c5c533b

powerpc/eeh: Cleanup list_head field names · 80e65b00

Sam Bobroff authored Sep 12, 2018

Instances of struct eeh_pe are placed in a tree structure using the
fields "child_list" and "child", so place these next to each other
in the definition.

The field "child" is a list entry, so remove the unnecessary and
misleading use of the list initializer, LIST_HEAD(), on it.

The eeh_dev struct contains two list entry fields, called "list" and
"rmv_list". Rename them to "entry" and "rmv_entry" and, as above, stop
initializing them with LIST_HEAD().
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

80e65b00

powerpc/eeh: Cleanup eeh_add_virt_device() · bf773df9

Sam Bobroff authored Sep 12, 2018

Remove the unnecessary cast through void * on the first parameter and
remove the unused second parameter (always NULL).
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

bf773df9

powerpc/eeh: Cleanup unused field in eeh_dev · b95a4606

Sam Bobroff authored Sep 12, 2018

The 'bus' member of struct eeh_dev is assigned to once but never used,
so remove it.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

b95a4606

powerpc/eeh: Cleanup EEH_POSTPONED_PROBE · bffc0176

Sam Bobroff authored Sep 12, 2018

Currently a flag, EEH_POSTPONED_PROBE, is used to prevent an incorrect
message "EEH: No capable adapters found" from being displayed during
the boot of powernv systems.

It is necessary because, on powernv, the call to eeh_probe_devices()
made from eeh_init() is too early and EEH can't yet be enabled. A
second call is made later from eeh_pnv_post_init(), which succeeds.

(On pseries, the first call succeeds because PCI devices are set up
early enough and no second call is made.)

This can be simplified by moving the early call to eeh_probe_devices()
from eeh_init() (where it's seen by both platforms) to
pSeries_final_fixup(), so that each platform only calls
eeh_probe_devices() once, at a point where it can succeed.
This is slightly later in the boot sequence, but but still early
enough and it is now in the same place in the sequence for both
platforms (the pcibios_fixup hook).

The display of the message can be cleaned up as well, by moving it
into eeh_probe_devices().
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

bffc0176

powerpc/eeh: Fix use of EEH_PE_KEEP on wrong field · 473af09b

Sam Bobroff authored Sep 12, 2018

eeh_add_to_parent_pe() sometimes removes the EEH_PE_KEEP flag, but it
incorrectly removes it from pe->type, instead of pe->state.

However, rather than clearing it from the correct field, remove it.
Inspection of the code shows that it can't ever have had any effect
(even if it had been cleared from the correct field), because the
field is never tested after it is cleared by the statement in
question.

The clear statement was added by commit 807a827d ("powerpc/eeh:
Keep PE during hotplug"), but it didn't explain why it was necessary.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

473af09b

powerpc/eeh: Fix null deref for devices removed during EEH · bcbe3730

Sam Bobroff authored Sep 12, 2018

If a device is removed during EEH processing (either by a driver's
handler or as part of recovery), it can lead to a null dereference
in eeh_pe_report_edev().

To handle this, skip devices that have been removed.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

bcbe3730

powerpc/eeh: Fix possible null deref in eeh_dump_dev_log() · f9bc28ae

Sam Bobroff authored Sep 12, 2018

If an error occurs during an unplug operation, it's possible for
eeh_dump_dev_log() to be called when edev->pdn is null, which
currently leads to dereferencing a null pointer.

Handle this by skipping the error log for those devices.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

f9bc28ae

powerpc/boot: Build boot wrapper with optimisations · 747b2176

Joel Stanley authored Oct 10, 2018

The boot wrapper is currently built with -Os. By building with O2 we
can meaningfully reduce the time decompressing the kernel.

I tested by comparing 10 runs of each option in Qemu and on hardware.
The kernel is compressed with KERNEL_XZ built with GCC 8.2.0-7ubuntu1.
The values are counts of the timebase.

Qemu TCG powernv Power8:

              Os            O2            O3
 median       10221123889   6201518438    6568186825
 stddev        1361267211    429090641     657930076
 improvement                    39.33%        35.74%

Palmetto Power8:

              Os            O2            O3
 median           50279         50599          35790
 stddev       992144533     627130655      623721078
 improvement                   36.79%         37.13%

Romulus Power9:

              Os            O2            O3
 median       670312391     454733720      448881398
 stddev          157569        107276         108760
 improvement                   32.16%         33.03%

TCG was quite noisy, with every few runs producing an outlier. Even so,
O2 is faster than O3. On hardware the numbers were less noisy and O3 is
slightly faster than O2.

The wrapper size increases when moving from Os. Comparing zImage.epapr
to the existing Os build using bloat-o-meter:

  Before=43401, After=56837 (13KB), chg +30.96%
  Before=43401, After=64305 (20KB), chg +48.16%

I chose O2 for a balance between Qemu and hardware speed up.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

747b2176

powerpc/boot: Disable vector instructions · e8e132e6

Joel Stanley authored Oct 10, 2018

This will avoid auto-vectorisation when building with higher
optimisation levels.

We don't know if the machine can support VSX and even if it's present
it's probably not going to be enabled at this point in boot.

These flag were both added prior to GCC 4.6 which is the minimum
compiler version supported by upstream, thanks to Segher for the
details.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

e8e132e6

powerpc/boot: Fix opal console in boot wrapper · 1a855eac

Joel Stanley authored Oct 10, 2018

As of commit 10c77dba ("powerpc/boot: Fix build failure in 32-bit
boot wrapper") the opal code is hidden behind CONFIG_PPC64_BOOT_WRAPPER,
but the boot wrapper avoids include/linux, so it does not get the normal
Kconfig flags.

We can drop the guard entirely as in commit f8e8e69c ("powerpc/boot:
Only build OPAL code when necessary") the makefile only includes opal.c
in the build if CONFIG_PPC64_BOOT_WRAPPER is set.

Fixes: 10c77dba ("powerpc/boot: Fix build failure in 32-bit boot wrapper")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1a855eac

powerpc/boot: Expose Kconfig symbols to wrapper · 5e9dcb61

Joel Stanley authored Oct 10, 2018

Currently the wrapper is built without including anything in
$(src)/include/, which means there are no CONFIG_ symbols defined.
This means the platform specific serial drivers were never enabled.

We now copy the definitions into the boot directory, so any C file can
now include autoconf.h to depend on configuration options.

Fixes: 866bfc75 ("powerpc: conditionally compile platform-specific serial drivers")
Signed-off-by: Joel Stanley <joel@jms.id.au>
[mpe: Fix to use $(objtree) to find autoconf.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

5e9dcb61

powerpc: remove redundant 'default n' from Kconfig-s · 719736e1

Bartlomiej Zolnierkiewicz authored Oct 09, 2018

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c564 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

719736e1

powerpc/rtasd: Improve unknown error logging · b27e5f93

Oliver O'Halloran authored Oct 10, 2018

Currently when we get an unknown RTAS event it prints the type as
"Unknown" and no other useful information. Add the raw type code to the
log message so that we have something to work off.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

b27e5f93

powerpc: Disable -Wbuiltin-requires-header when setjmp is used · aea44714

Joel Stanley authored Sep 17, 2018

The powerpc kernel uses setjmp which causes a warning when building
with clang:

  In file included from arch/powerpc/xmon/xmon.c:51:
  ./arch/powerpc/include/asm/setjmp.h:15:13: error: declaration of
  built-in function 'setjmp' requires inclusion of the header <setjmp.h>
        [-Werror,-Wbuiltin-requires-header]
  extern long setjmp(long *);
              ^
  ./arch/powerpc/include/asm/setjmp.h:16:13: error: declaration of
  built-in function 'longjmp' requires inclusion of the header <setjmp.h>
        [-Werror,-Wbuiltin-requires-header]
  extern void longjmp(long *, long);
              ^

This *is* the header and we're not using the built-in setjump but
rather the one in arch/powerpc/kernel/misc.S. As the compiler warning
does not make sense, it for the files where setjmp is used.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
[mpe: Move subdir-ccflags in xmon/Makefile to not clobber -Werror]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

aea44714

powerpc: Fix signedness bug in update_flash_db() · 014704e6

Dan Carpenter authored Oct 01, 2018

The "count < sizeof(struct os_area_db)" comparison is type promoted to
size_t so negative values of "count" are treated as very high values
and we accidentally return success instead of a negative error code.

This doesn't really change runtime much but it fixes a static checker
warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

014704e6

powerpc/perf: Quiet IMC PMU registration message · 6233b6da

Joel Stanley authored Oct 09, 2018

On a Power9 box we get a few screens full of these on boot. Drop
them to pr_debug.

  [    5.993645] nest_centaur6_imc performance monitor hardware support registered
  [    5.993728] nest_centaur7_imc performance monitor hardware support registered
  [    5.996510] core_imc performance monitor hardware support registered
  [    5.996569] nest_mba0_imc performance monitor hardware support registered
  [    5.996631] nest_mba1_imc performance monitor hardware support registered
  [    5.996685] nest_mba2_imc performance monitor hardware support registered
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Reviewed-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

6233b6da

powerpc/process: Constify the number of insns printed by show instructions functions. · df13102f

Christophe Leroy authored Oct 06, 2018

instructions_to_print var is assigned value 16 and there is no
way to change it.

This patch replaces it by a constant.
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

df13102f

powerpc/process: Fix interleaved output in show_user_instructions() · fb2d9505

Christophe Leroy authored Oct 06, 2018

When two processes crash at the same time, we sometimes encounter
interleaving in the middle of a line:

  init[1]: segfault (11) at 0 nip 0 lr 0 code 1
  init[1]: code: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  init[74]: segfault (11) at 10a74 nip 1000c198 lr 100078c8 code 1 in sh[10000000+14000]
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  init[1]: code: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  init[74]: code: 90010024 bf61000c 91490a7c 3fa01002 3be00000 7d3e4b78 3bbd0c20 3b600000
  init[74]: code: 3b9d0040 7c7fe02e 2f830000 419e0028 <89230000> 2f890000 41be001c 4b7f6e79

This patch fixes it by preparing complete lines in a buffer and
printing it at once.

Fixes: 88b0fe17 ("powerpc: Add show_user_instructions()")
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Use seq_buf_printf() not seq_buf_puts() which doesn't NULL terminate]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

fb2d9505

powerpc/process: Add missing include of stacktrace.h · c9386bfd

Christophe Leroy authored Oct 09, 2018

As spotted by sparse:

  arch/powerpc/kernel/process.c:1302:6: warning: symbol 'show_user_instructions' was not declared. Should it be static?

Fixes: 88b0fe17 ("powerpc: Add show_user_instructions()")
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

c9386bfd

powerpc/process: Fix sparse address space warnings · 3b35bd48

Christophe Leroy authored Oct 06, 2018

This patch fixes the following warnings, which are leftovers
from when __get_user() was replaced by probe_kernel_address().

arch/powerpc/kernel/process.c:1287:22: warning: incorrect type in argument 2 (different address spaces)
arch/powerpc/kernel/process.c:1287:22:    expected void const *src
arch/powerpc/kernel/process.c:1287:22:    got unsigned int [noderef] <asn:1>*<noident>
arch/powerpc/kernel/process.c:1319:21: warning: incorrect type in argument 2 (different address spaces)
arch/powerpc/kernel/process.c:1319:21:    expected void const *src
arch/powerpc/kernel/process.c:1319:21:    got unsigned int [noderef] <asn:1>*<noident>

Fixes: 7b051f66 ("powerpc: Use probe_kernel_address in show_instructions")
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

3b35bd48

powerpc/64: properly initialise the stackprotector canary on SMP. · 7241d26e

Christophe Leroy authored Oct 13, 2018

commit 06ec27ae ("powerpc/64: add stack protector support")
doesn't initialise the stack canary on SMP secondary CPU's paca,
leading to the following false positive report from the
stack protector.

smp: Bringing up secondary CPUs ...
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: __schedule+0x978/0xa80
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.19.0-rc7-next-20181010-autotest-autotest #1
Call Trace:
[c000001fed5b3bf0] [c000000000a0ef3c] dump_stack+0xb0/0xf4 (unreliable)
[c000001fed5b3c30] [c0000000000f9d68] panic+0x140/0x308
[c000001fed5b3cc0] [c0000000000f9844] __stack_chk_fail+0x24/0x30
[c000001fed5b3d20] [c000000000a2c3a8] __schedule+0x978/0xa80
[c000001fed5b3e00] [c000000000a2c9b4] schedule_idle+0x34/0x60
[c000001fed5b3e30] [c00000000013d344] do_idle+0x224/0x3d0
[c000001fed5b3ec0] [c00000000013d6e0] cpu_startup_entry+0x30/0x50
[c000001fed5b3ef0] [c000000000047f34] start_secondary+0x4d4/0x520
[c000001fed5b3f90] [c00000000000b370] start_secondary_prolog+0x10/0x14

This patch properly initialises the stack_canary of the secondary
idle tasks.
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Fixes: 06ec27ae ("powerpc/64: add stack protector support")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

7241d26e

09 Oct, 2018 1 commit

Merge branch 'fixes' into next · 9b7e4d60

Michael Ellerman authored Oct 09, 2018

Merge our fixes branch. It has a few important fixes that are needed for
futher testing and also some commits that will conflict with content in
next.

9b7e4d60

08 Oct, 2018 7 commits