- 14 May, 2021 16 commits
-
-
Jiaran Zhang authored
Currently, the debugfs command for ncl config is implemented by "echo xxxx > cmd", and record the information in dmesg. It's unnecessary and heavy. To improve it, create a single file "ncl_config" for it, and query it by command "cat ncl_config", return the result to userspace, rather than record in dmesg. The display style is below: $cat ncl_config offset | data 0x0000 | 0x00000028 0x0004 | 0x00000400 0x0008 | 0x08040201 0x000c | 0x00000000 0x0010 | 0x00040004 0x0014 | 0x00040004 0x0018 | 0x00000000 0x001c | 0x00000000 0x0020 | 0x00040004 Signed-off-by:
Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiaran Zhang authored
Currently, the debugfs command for m7 info is implemented by "echo xxxx > cmd", and record the information in dmesg. It's unnecessary and heavy. To improve it, create a single file "imp_info" for it, and query it by command "cat imp_info", return the result to userspace, rather than record in dmesg. The display style is below: $cat imp_info offset | data 0x0000 | 0x00000000 0x00000000 0x0008 | 0x00000000 0x00000000 0x0010 | 0x00000000 0x00000001 0x0018 | 0x00000000 0x00000000 0x0020 | 0x00000000 0x00000000 0x0028 | 0x00000000 0x00000000 0x0030 | 0x00000000 0x00000000 Signed-off-by:
-
Jiaran Zhang authored
Currently, the debugfs command for reset info is implemented by "echo xxxx > cmd", and record the information in dmesg. It's unnecessary and heavy. To improve it, create a single file "reset_info" for it, and query it by command "cat reset_info", return the result to userspace, rather than record in dmesg. The display style is below: $cat reset_info PF reset count: 0 FLR reset count: 0 GLOBAL reset count: 0 IMP reset count: 0 reset done count: 0 HW reset done count: 0 reset count: 0 reset fail count: 0 vector0 interrupt enable status: 0x1 reset interrupt source: 0x0 reset interrupt status: 0x0 RAS interrupt status:0x0 hardware reset status: 0x0 handshake status: 0x80 function reset status: 0x0 Change to the "hclge_show_rst_info" in the "hclge_reset_err_handle", when the reset fails, display reset info immediately. Signed-off-by:
-
Jiaran Zhang authored
Currently, the debugfs command for intr is implemented by "echo xxxx > cmd", and record the information in dmesg. It's unnecessary and heavy. To improve it, create a single file "interrupt_info" for it, and query it by command "cat interrupt_info", return the result to userspace, rather than record in dmesg. The display style is below: $cat interrupt_info num_nic_msi: 65 num_roce_msi: 65 num_msi_used: 2 num_msi_left: 128 Signed-off-by:
-
Yufeng Mo authored
Currently, the debugfs command for loopback is implemented by "echo xxxx > cmd", and record the information in dmesg. It's unnecessary and heavy. To improve it, create a single file "loopback" for it, and query it by command "cat loopback", return the result to userspace, rather than record in dmesg. The display style is below: $ cat loopback mac id: 0 app loopback: off serdes serial loopback: off serdes parallel loopback: off Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
Yufeng Mo authored
Currently, the debugfs command for mng tbl is implemented by "echo xxxx > cmd", and record the information in dmesg. It's unnecessary and heavy. To improve it, create a single file "mng_tbl" for it, and query it by command "cat mng_tbl", return the result to userspace, rather than record in dmesg. The display style is below: $ cat mng_tbl entry mac_addr mask ether mask vlan mask i_map ... 00 00:00:00:00:00:00 0 88cc 0 0000 1 0f ... Signed-off-by:
-
Huazhong Tan authored
Currently, the debugfs command for mac list info is implemented by "echo xxxx > cmd", and record the information in dmesg. It's unnecessary and heavy. To improve it, create two files "uc" and "mc" under directory "mac_list" for it, and query mac list info by "cat mac_list/uc" and "mac_list/mc", return the result to userspace, rather than record in dmesg. The display style is below: $ cat mac_list/uc UC MAC_LIST: FUNC_ID MAC_ADDR STATE pf 00:18:2d:00:00:71 ACTIVE $ cat mac_list/mc MC MAC_LIST: FUNC_ID MAC_ADDR STATE pf 01:80:c2:00:00:21 ACTIVE Signed-off-by:
-
Huazhong Tan authored
Currently, the debugfs command for bd info is implemented by "echo xxxx > cmd", and record the information in dmesg. It's unnecessary and heavy. To improve it, add two debugfs directories "tx_bd_info" and "rx_bd_info", and create a file for each queue under these two directories, and query the bd info of specific queue by "cat tx_bd_info/tx_bd_queue*" or "cat rx_bd_info/rx_bd_queue*", return the result to userspace, rather than record in dmesg. The display style is below: $ cat rx_bd_info/rx_bd_queue0 Queue 0 rx bd info: BD_IDX L234_INFO PKT_LEN SIZE... 0 0x0 60 60... 1 0x0 1512 1512... $ cat tx_bd_info/tx_bd_queue0 Queue 0 tx bd info: BD_IDX ADDRESS VLAN_TAG SIZE... 0 0x0 0 0... 1 0x0 0 0... Signed-off-by:
-
Jiaran Zhang authored
Currently, the debugfs command for dev capability and dev spec are implemented by "echo xxxx > cmd", and record the information in dmesg. It's unnecessary and heavy. To improve it, create a single file "dev_info" for them, and query them by command "cat dev_info", return the result to userspace, rather than record in dmesg. The display style is below: $cat dev_info dev capability: support FD: yes support GRO: yes support FEC: yes support UDP GSO: no support PTP: no support INT QL: no support HW TX csum: no support UDP tunnel csum: no support TX push: no support imp-controlled PHY: no support rxd advanced layout: no dev spec: MAC entry num: 0 MNG entry num: 0 MAX non tso bd num: 8 RSS ind tbl size: 512 RSS key size: 40 RSS size: 1 Allocated RSS size: 0 Task queue pairs numbers: 1 RX buffer length: 2048 Desc num per TX queue: 1024 Desc num per RX queue: 1024 Total number of enabled TCs: 1 MAX INT QL: 0 MAX INT GL: 8160 MAX TM RATE: 100000 MAX QSET number: 1024 Signed-off-by:
-
Yufeng Mo authored
Currently, each debugfs command needs to create a file to get the information. To better support more debugfs commands, the debugfs process is reconstructed, including the process of creating dentries and files, and obtaining information. Signed-off-by:
-
Huazhong Tan authored
Only when RXD advanced layout is enabled, in some cases (e.g. ip fragments), the checksum of entire packet will be calculated and filled in the least significant 16 bits of the unused addr field. So refactor out the handling of RX completion checksum: adjust the location of the checksum in RX descriptor, and use ptype table to identify whether this kind of checksum is calculated. Signed-off-by:
-
Huazhong Tan authored
Currently, the driver gets packet type by parsing the L3_ID/L4_ID/OL3_ID/OL4_ID from RX descriptor, it's time-consuming. Now some new devices support RXD advanced layout, which combines previous OL3_ID/OL4_ID to 8bit ptype field, so the driver gets packet type by looking up only one table, and L3_ID/L4_ID become reserved fields. Considering compatibility, the firmware will report capability of RXD advanced layout, the driver will identify and enable it by default. This patch provides basic function: identify and enable the RXD advanced layout, and refactor out hns3_rx_checksum() by using ptype table to handle RX checksum if supported. Signed-off-by:
-
Guenter Roeck authored
The result of container_of() operations is never NULL unless the embedded element is the first element of the structure. This is not the case here. The NULL check is therefore unnecessary and misleading. Remove it. This change was made automatically with the following Coccinelle script. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Heiner Kallweit authored
Using netif_info() before the net_device is registered results in ugly messages like the following: sfc 0000:01:00.1 (unnamed net_device) (uninitialized): Solarflare NIC detected Therefore use pci_info() et al until net_device is registered. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Matteo Croce authored
The br_ip6_multicast_add_router() prototype is defined only when CONFIG_IPV6 is enabled, but the function is always referenced, so there is this build error with CONFIG_IPV6 not defined: net/bridge/br_multicast.c: In function ‘__br_multicast_enable_port’: net/bridge/br_multicast.c:1743:3: error: implicit declaration of function ‘br_ip6_multicast_add_router’; did you mean ‘br_ip4_multicast_add_router’? [-Werror=implicit-function-declaration] 1743 | br_ip6_multicast_add_router(br, port); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ | br_ip4_multicast_add_router net/bridge/br_multicast.c: At top level: net/bridge/br_multicast.c:2804:13: warning: conflicting types for ‘br_ip6_multicast_add_router’ 2804 | static void br_ip6_multicast_add_router(struct net_bridge *br, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ net/bridge/br_multicast.c:2804:13: error: static declaration of ‘br_ip6_multicast_add_router’ follows non-static declaration net/bridge/br_multicast.c:1743:3: note: previous implicit declaration of ‘br_ip6_multicast_add_router’ was here 1743 | br_ip6_multicast_add_router(br, port); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this build error by moving the definition out of the #ifdef. Fixes: a3c02e76 ("net: bridge: mcast: split multicast router state for IPv4 and IPv6") Signed-off-by:Matteo Croce <mcroce@microsoft.com> Signed-off-by:
-
Nikolay Aleksandrov authored
br_multicast_is_router takes two arguments when bridge IGMP is enabled and just one when it's disabled, fix the stub to take two as well. Fixes: 1a3065a2 ("net: bridge: mcast: prepare is-router function for mcast router split") Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
-
- 13 May, 2021 24 commits
-
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by:
-
Guenter Roeck authored
The first parameter passed to chnl_recv_cb() can never be NULL since all callers dereferenced it. Consequently, container_of() on it is also never NULL, even though the reference into the structure points to the first element of the structure. The NULL check is therefore unnecessary. On top of that, it is misleading to perform a NULL check on the result of container_of() because the position of the contained element could change, which would make the test invalid. Remove the unnecessary NULL check. This change was made automatically with the following Coccinelle script. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> Signed-off-by:
-
Colin Ian King authored
The variable rc is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Xuan Zhuo says: ==================== virtio-net: fix for build_skb() The logic of this piece is really messy. Fortunately, my refactored patch can be completed with a small amount of testing. ==================== Signed-off-by: -
Xuan Zhuo authored
In the case of merge, the page passed into page_to_skb() may be a head page, not the page where the current data is located. So when trying to get the buf where the data is located, you should directly use the pointer(p) to get the address corresponding to the page. At the same time, the offset of the data in the page should also be obtained using offset_in_page(). This patch solves this problem. But if you don’t use this patch, the original code can also run, because if the page is not the page of the current data, the calculated tailroom will be less than 0, and will not enter the logic of build_skb() . The significance of this patch is to modify this logical problem, allowing more situations to use build_skb(). Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by:
-
Xuan Zhuo authored
In merge mode, when xdp is enabled, if the headroom of buf is smaller than virtnet_get_headroom(), xdp_linearize_page() will be called but the variable of "headroom" is still 0, which leads to wrong logic after entering page_to_skb(). [ 16.600944] BUG: unable to handle page fault for address: ffffecbfff7b43c8[ 16.602175] #PF: supervisor read access in kernel mode [ 16.603350] #PF: error_code(0x0000) - not-present page [ 16.604200] PGD 0 P4D 0 [ 16.604686] Oops: 0000 [#1] SMP PTI [ 16.605306] CPU: 4 PID: 715 Comm: sh Tainted: G B 5.12.0+ #312 [ 16.606429] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/04 [ 16.608217] RIP: 0010:unmap_page_range+0x947/0xde0 [ 16.609014] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065 [ 16.611863] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286 [ 16.612720] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359 [ 16.613853] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005 [ 16.614976] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030 [ 16.616124] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f [ 16.617276] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000 [ 16.618423] FS: 0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000 [ 16.619738] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.620670] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0 [ 16.621792] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.622920] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.624047] Call Trace: [ 16.624525] ? release_pages+0x24d/0x730 [ 16.625209] unmap_single_vma+0xa9/0x130 [ 16.625885] unmap_vmas+0x76/0xf0 [ 16.626480] exit_mmap+0xa0/0x210 [ 16.627129] mmput+0x67/0x180 [ 16.627673] do_exit+0x3d1/0xf10 [ 16.628259] ? do_user_addr_fault+0x231/0x840 [ 16.629000] do_group_exit+0x53/0xd0 [ 16.629631] __x64_sys_exit_group+0x1d/0x20 [ 16.630354] do_syscall_64+0x3c/0x80 [ 16.630988] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.631828] RIP: 0033:0x7f1a043d0191 [ 16.632464] Code: Unable to access opcode bytes at RIP 0x7f1a043d0167. [ 16.633502] RSP: 002b:00007ffe3d993308 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 16.634737] RAX: ffffffffffffffda RBX: 00007f1a044c9490 RCX: 00007f1a043d0191 [ 16.635857] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 [ 16.636986] RBP: 0000000000000000 R08: ffffffffffffff88 R09: 0000000000000001 [ 16.638120] R10: 0000000000000008 R11: 0000000000000246 R12: 00007f1a044c9490 [ 16.639245] R13: 0000000000000001 R14: 00007f1a044c9968 R15: 0000000000000000 [ 16.640408] Modules linked in: [ 16.640958] CR2: ffffecbfff7b43c8 [ 16.641557] ---[ end trace bc4891c6ce46354c ]--- [ 16.642335] RIP: 0010:unmap_page_range+0x947/0xde0 [ 16.643135] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065 [ 16.645983] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286 [ 16.646845] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359 [ 16.647970] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005 [ 16.649091] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030 [ 16.650250] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f [ 16.651394] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000 [ 16.652529] FS: 0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000 [ 16.653887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.654841] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0 [ 16.655992] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.657150] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.658290] Kernel panic - not syncing: Fatal exception [ 16.659613] Kernel Offset: disabled [ 16.660234] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: fb32856b ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by:
-
David S. Miller authored
Gatis Peisenieks says: ==================== atl1c: support for Mikrotik 10/25G NIC features The new Mikrotik 10/25G NIC maintains compatibility with existing atl1c driver. However it does have new features. This patch set adds support for reporting cards higher link speed, max-mtu, enables rx csum offload and improves tx performance. v2: - fixed xmit_more handling as pointed out by Eric Dumazet - added a more reliable link detection on Mikrotik 10/25G NIC since MDIO op emulation can occasionally fail Guangbin Huang says: ==================== Signed-off-by: -
Gatis Peisenieks authored
Mikrotik 10/25G NIC emulates the MDIO accesses, but the emulation is not 100% reliable - the MDIO ops occasionally can timeout. This adds a reliable way of detecting link on Mikrotik 10/25G NIC. Signed-off-by:
Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by:
-
Gatis Peisenieks authored
Mikrotik 10/25G NIC supports hw checksum verification on rx for IP/IPv6 + TCP/UDP packets. HW checksum offload helps reduce host cpu load. This enables the csum offload specifically for Mikrotik 10/25G NIC as other HW supported by the driver is known to have problems with it. TCP iperf3 to Threadripper 3960X with NIC improved 16.5 -> 20.0 Gbps with mtu=1500. Signed-off-by:
-
Gatis Peisenieks authored
The new Mikrotik 10/25G NIC supports jumbo frames. Jumbo frames are supported for TSO as well. This enables the support for mtu up to 9500 bytes. Signed-off-by:
-
Gatis Peisenieks authored
The kernel has xmit_more facility that hints the networking driver xmit path about whether more packets are coming soon. This information can be used to avoid unnecessary expensive PCIe transaction per tx packet. Max TX pps on Mikrotik 10/25G NIC in a Threadripper 3960X system improved from 1150Kpps to 1700Kpps. Testing L2 forwarding on AR8151 hardware did not reveal a measurable increase in latency. Signed-off-by:
-
Gatis Peisenieks authored
The new Mikrotik 10/25G NIC maintains compatibility with existing atl1c driver. However it does have new features. This defines some new register offsets, code for identifying the new type of NIC and correct speed detection for the NIC. Signed-off-by:
-
David S. Miller authored
Guangbin Huang says: ==================== net: hinic: some cleanups This patchset adds some cleanups for the hinic ethernet driver. ==================== Signed-off-by: -
Guangbin Huang authored
The word "acessing" is misspelled, so fix it. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Guangbin Huang authored
There are some unnecessary parentheses, this patch deletes them. Signed-off-by:
-
Guangbin Huang authored
There should be a blank line after function declaration, so add two missed blank lines. Signed-off-by:
-
Guangbin Huang authored
There are two blank lines are unnecessary, this patch removes them. Signed-off-by:
-
David S. Miller authored
Linus Lüssing says: ==================== net: bridge: split IPv4/v6 mc router state and export for batman-adv The following patches are splitting the so far combined multicast router state in the Linux bridge into two ones, one for IPv4 and one for IPv6, for a more fine-grained detection of multicast routers. This avoids sending IPv4 multicast packets to an IPv6-only multicast router and avoids sending IPv6 multicast packets to an IPv4-only multicast router. This also allows batman-adv to make use of the now split information in the final patch. The first eight patches prepare the bridge code to avoid duplicate code or IPv6-#ifdef clutter for the multicast router state split. And contain no functional changes yet. The ninth patch then implements the IPv4+IPv6 multicast router state split. Patch number ten adds IPv4+IPv6 specific timers to the mdb netlink router port dump, so that the timers validity can be checked individually from userspace. The final, eleventh patch exports this now per protocol family multicast router state so that batman-adv can then later make full use of the Multicast Router Discovery (MRD) support in the Linux bridge. The batman-adv protocol format currently expects separate multicast router states for IPv4 and IPv6, therefore it depends on the first patch. batman-adv will then make use of this newly exported functions like this[0]. Regards, Linus [0]: https://git.open-mesh.org/batman-adv.git/shortlog/refs/heads/linus/multicast-routeable-mrd -> https://git.open-mesh.org/batman-adv.git/commit/d4bed3a92427445708baeb1f2d1841c5fb816fd4 Changelog v3: * Patch 01/11: * fixed/added missing rename of br->router_list to br->ip4_mc_router_list in br_multicast_flood() * Patch 02/11: * moved inline functions from br_forward.c to br_private.h * Patch 03/11: * removed inline attribute from functions added to br_mdb.c * Patch 04/11: * unchanged * Patch 05/11: * converted if()'s into switch-case in br_multicast_is_router() * Patch 06/11: * removed inline attribute from function added to br_multicast.c * Patch 07/11: * added missing static attribute to function br_ip4_multicast_get_rport_slot() added to br_multicast.c * Patch 08/11: * removed inline attribute from function added to br_multicast.c * Patch 09/11: * added missing static attribute to function br_ip6_multicast_get_rport_slot() added to br_multicast.c * removed inline attribute from function added to br_multicast.c * Patch 10/11: * unchanged * Patch 11/11: * simplified bridge check in br_multicast_has_router_adjacent() by using br_port_get_check_rcu() * added missing declaration for br_multicast_has_router_adjacent() in include/linux/if_bridge.h Changelog v2: * split into multiple patches as suggested by Nikolay * added helper functions to br_multicast_flood(), avoiding IPv6 #ifdef clutter * fixed reverse xmas tree ordering in br_rports_fill_info() and added helper functions to avoid IPv6 #ifdef clutter * Added a common br_multicast_add_router() and a helper function to retrieve the correct slot to avoid duplicate code for an ip4 and ip6 variant * replaced the "1" and "2" constants in br_multicast_is_router() with the appropriate enums * added br_{ip4,ip6}_multicast_rport_del() wrappers to reduce IPv6 #ifdef clutter * added return values to br_*multicast_rport_del() to only notify if the port was actually removed and did not race with a readdition somewhere else * added empty, void br_ip6_multicast_mark_router() if compiled without IPv6, to reduce IPv6 #ifdef clutter ==================== Signed-off-by:
-
Linus Lüssing authored
To properly support routable multicast addresses in batman-adv in a group-aware way, a batman-adv node needs to know if it serves multicast routers. This adds a function to the bridge to export this so that batman-adv can then make full use of the Multicast Router Discovery capability of the bridge. Signed-off-by:
-
Linus Lüssing authored
Now that we have split the multicast router state into two, one for IPv4 and one for IPv6, also add individual timers to the mdb netlink router port dump. Leaving the old timer attribute for backwards compatibility. Signed-off-by:
-
Linus Lüssing authored
A multicast router for IPv4 does not imply that the same host also is a multicast router for IPv6 and vice versa. To reduce multicast traffic when a host is only a multicast router for one of these two protocol families, keep router state for IPv4 and IPv6 separately. Similar to how querier state is kept separately. For backwards compatibility for netlink and switchdev notifications these two will still only notify if a port switched from either no IPv4/IPv6 multicast router to any IPv4/IPv6 multicast router or the other way round. However a full netlink MDB router dump will now also include a multicast router timeout for both IPv4 and IPv6. Signed-off-by:
-
Linus Lüssing authored
In preparation for the upcoming split of multicast router state into their IPv4 and IPv6 variants split router port deletion and notification into two functions. When we disable a port for instance later we want to only send one notification to switchdev and netlink for compatibility and want to avoid sending one for IPv4 and one for IPv6. For that the split is needed. Signed-off-by:
-
Linus Lüssing authored
In preparation for the upcoming split of multicast router state into their IPv4 and IPv6 variants move the protocol specific router list and timer access to ip4 wrapper functions. Signed-off-by:
-
