In the LunarLake hardware, the default IP ownership changed to the
host driver, instead of the firmware in previous generation.

In the absence of any capability negotiation, we need to assume a
fixed partitioning between host driver and firmware. The OFLEN bit
needs to be set as early as possible for resources handled by the
firmware, since we can't control when the firmware might try to access
the resources.

For now DMIC and SSP are handled by the DSP firmware. SoundWire is a
separate case, the OFLEN bit can be set when starting-up and resuming
the aux device for each link.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-9-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

It was just a matter of time before we found a case where we needed
separate ops for MTL and LNL. For LNL we need to set the DMIC/SSP
OFLEN bit in the probe and resume steps, and this can only be done
cleanly with separate ops.

The function prototypes in mtl.h were added in the same order as their
implementation in mtl.c.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-8-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add initial support for Lunarlake. For now only HDAudio interfaces are
supported, DMIC/SSP/SoundWire require additional work so that the DAIs
reuse the HDaudio DMA stream allocation.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-7-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

All interfaces are accessible without the DSP and rely on the HDaudio
DMA only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-6-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The initial code had a logic flaw where the gateway config length kept
increasing after each playback/capture trigger, with the DMA config
TLV being added at every call of sof_ipc4_prepare_copier_module()

This didn't cause any issues with regular playback/capture, but this
was flagged as an error by firmware in the case of multiple amplifiers
on different links.

Fixes: a0659f81 ("ASoC: SOF: ipc4-topology: add DMA config TLV to IPC data")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-5-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When a pipeline contains multiple DAI widgets, the pipe_widget is not
set up except for the first DAI. This result in the pipe_widget having
a default instance 0, which can conflict with another real the
pipeline instance 0 and leads to spurious transitions.

This patch makes sure the instance_id is properly initialized to a
-EINVAL value.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Likely a combination of copy-paste and test coverage problem. Oops.

Fixes: 87a6ddc0 ("ASoC: SOF: Intel: hda-mlink: program SoundWire LSDIID registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The HCHAN parameter should be the highest channel number, not the
channel count.

While we're at it, handle LCHAN with the dual __ffs helper.

Fixes: ccc2f0c1 ("ASoC: SOF: Intel: hda-mlink: add helper to program SoundWire PCMSyCM registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Expand the HDA/I915 connectivity check to correctly handle
the PCI topology used in some Intel Arrow Lake products.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: "T, Arun" <arun.t@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-6-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

One more PCI ID for the road.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-5-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

This was not updated in Commit 0cd0a7c2 ("ALSA: intel-dsp-config: Convert to PCI device IDs defines")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add HD Audio PCI ID for Intel Arrow Lake-S platform.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add part ID to common include file
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use PCI device IDs from pci_ids.h header. BSW replaces CHV, as 0x22a8
was added in PCI header as BSW ID for consistency, as they are same
(similar) platforms. The ACPI IDs are used only internally and lower
16 bits uniquely define the device as vendor ID for Intel is 8086 for
all of them. Use PCI_DEVICE_DATA() to match PCI device to be consistent
with other Intel audio drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-16-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use PCI device IDs from pci_ids.h header and while at it change to using
PCI_DEVICE_DATA() macro, to simplify declarations.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-15-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use PCI device IDs from pci_ids.h header and while at it change to using
PCI_DEVICE_DATA() macro, to simplify declarations. As Apollolake is
Broxton-P successor that made it to the market, be precise and use APL
shortcut.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-14-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use PCI device IDs from pci_ids.h header. Adjust AVS_MACH_ENTRY() macro,
so device ID can be provided in short form.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-13-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use PCI device IDs from pci_ids.h header and while at it change to using
PCI_DEVICE_DATA() macro, to simplify declarations.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-12-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use PCI device IDs from pci_ids.h header and while at it to simplify
declarations change to using PCI_DEVICE_DATA() macro for Intel IDs and
PCI_VDEVICE() for all other that have defined vendor.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-11-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use PCI device IDs from pci_ids.h header. Also simplify comments for
Alder Lake and Raptor Lake platforms, as new IDs make it clear what
revision is in use.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # for Intel Tangier ID
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-10-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Instead of using local macro to match PCI device, use global one. As
Apollolake is Broxton-P successor that made it to the market, be precise
and use APL shortcut. IS_CFL() macro is dropped as it is unused.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-9-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Instead of using local macro to match PCI device, use global one.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-8-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Instead of using local macro to match PCI device, use global one. As
Apollolake is Broxton-P successor that made it to the market, be precise
and use APL shortcut.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-7-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Some HDA controllers require additional handling, so there are macros to
match them, however those are spread across multiple files. Add them all
in one place, so they can be reused.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-6-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Current code references 0x1a98 which is BXT-M (not -T as it is
commented) and it's an RVP, BXT-M B0 to be specific. From what we know
no BXT is available on market.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-5-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Current code references 0x1a98 which is BXT-M (not -T as it is
commented) and it's an RVP, BXT-M B0 to be specific. From what we know
no BXT is available on market.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-4-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Those IDs are mostly sprinkled between HDA, Skylake, SOF and avs drivers.
Almost every use contains additional comments to identify to which
platform those IDs refer to. Add those IDs to pci_ids.h header, so that
there is one place which defines those names.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # for the Intel Tangier ID
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-3-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Some of the PCI IDs are not sorted correctly, reorder them by growing ID
number.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-2-amadeuszx.slawinski@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull xtensa fixes from Max Filippov:

 - fix interaction between unaligned exception handler and load/store
   exception handler

 - fix parsing ISS network interface specification string

 - add comment about etherdev freeing to ISS network driver

* tag 'xtensa-20230716' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix unaligned and load/store configuration interaction
  xtensa: ISS: fix call to split_if_spec
  xtensa: ISS: add comment about etherdev freeing

Pull perf fix from Borislav Petkov:

 - Fix a lockdep warning when the event given is the first one, no event
   group exists yet but the code still goes and iterates over event
   siblings

* tag 'perf_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix lockdep warning in for_each_sibling_event() on SPR

Pull objtool fixes from Borislav Petkov:

 - Mark copy_iovec_from_user() __noclone in order to prevent gcc from
   doing an inter-procedural optimization and confuse objtool

 - Initialize struct elf fully to avoid build failures

* tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  iov_iter: Mark copy_iovec_from_user() noclone
  objtool: initialize all of struct elf

Pull scheduler fixes from Borislav Petkov:

 - Remove a cgroup from under a polling process properly

 - Fix the idle sibling selection

* tag 'sched_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/psi: use kernfs polling functions for PSI trigger polling
  sched/fair: Use recent_used_cpu to test p->cpus_ptr

Pull pin control fixes from Linus Walleij:
 "I'm mostly on vacation but what would vacation be without a few
  critical fixes so people can use their gaming laptops when hiding away
  from the sun (or rain)?

   - Fix a really annoying interrupt storm in the AMD driver affecting
     Asus TUF gaming notebooks

   - Fix device tree parsing in the Renesas driver"

* tag 'pinctrl-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: Unify debounce handling into amd_pinconf_set()
  pinctrl: amd: Drop pull up select configuration
  pinctrl: amd: Use amd_pinconf_set() for all config options
  pinctrl: amd: Only use special debounce behavior for GPIO 0
  pinctrl: renesas: rzg2l: Handle non-unique subnode names
  pinctrl: renesas: rzv2m: Handle non-unique subnode names

Pull smb client fixes from Steve French:

 - Two reconnect fixes: important fix to address inFlight count to leak
   (which can leak credits), and fix for better handling a deleted share

 - DFS fix

 - SMB1 cleanup fix

 - deferred close fix

* tag '6.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix mid leak during reconnection after timeout threshold
  cifs: is_network_name_deleted should return a bool
  smb: client: fix missed ses refcounting
  smb: client: Fix -Wstringop-overflow issues
  cifs: if deferred close is disabled then close files immediately

Pull powerpc fixes from Michael Ellerman:

 - Fix Speculation_Store_Bypass reporting in /proc/self/status on
   Power10

 - Fix HPT with 4K pages since recent changes by implementing pmd_same()

 - Fix 64-bit native_hpte_remove() to be irq-safe

Thanks to Aneesh Kumar K.V, Nageswara R Sastry, and Russell Currey.

* tag 'powerpc-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/book3s64/hash/4k: Add pmd_same callback for 4K page size
  powerpc/64e: Fix obtool warnings in exceptions-64e.S
  powerpc/security: Fix Speculation_Store_Bypass reporting on Power10
  powerpc/64s: Fix native_hpte_remove() to be irq-safe

Pull hardening fixes from Kees Cook:

 - Remove LTO-only suffixes from promoted global function symbols
   (Yonghong Song)

 - Remove unused .text..refcount section from vmlinux.lds.h (Petr Pavlu)

 - Add missing __always_inline to sparc __arch_xchg() (Arnd Bergmann)

 - Claim maintainership of string routines

* tag 'hardening-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  sparc: mark __arch_xchg() as __always_inline
  MAINTAINERS: Foolishly claim maintainership of string routines
  kallsyms: strip LTO-only suffixes from promoted global functions
  vmlinux.lds.h: Remove a reference to no longer used sections .text..refcount

Merge tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probe fixes from Masami Hiramatsu:

 - fprobe: Add a comment why fprobe will be skipped if another kprobe is
   running in fprobe_kprobe_handler().

 - probe-events: Fix some issues related to fetch-arguments:

    - Fix double counting of the string length for user-string and
      symstr. This will require longer buffer in the array case.

    - Fix not to count error code (minus value) for the total used
      length in array argument. This makes the total used length
      shorter.

    - Fix to update dynamic used data size counter only if fetcharg uses
      the dynamic size data. This may mis-count the used dynamic data
      size and corrupt data.

    - Revert "tracing: Add "(fault)" name injection to kernel probes"
      because that did not work correctly with a bug, and we agreed the
      current '(fault)' output (instead of '"(fault)"' like a string)
      explains what happened more clearly.

    - Fix to record 0-length (means fault access) data_loc data in fetch
      function itself, instead of store_trace_args(). If we record an
      array of string, this will fix to save fault access data on each
      entry of the array correctly.

* tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails
  Revert "tracing: Add "(fault)" name injection to kernel probes"
  tracing/probes: Fix to update dynamic data counter if fetcharg uses it
  tracing/probes: Fix not to count error code to total length
  tracing/probes: Fix to avoid double count of the string length on the array
  fprobes: Add a comment why fprobe_kprobe_handler exits if kprobe is running

Pull spi fixes from Mark Brown:
 "A couple of fairly minor driver specific fixes here, plus a bunch of
  maintainership and admin updates. Nothing too remarkable"

* tag 'spi-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  mailmap: add entry for Jonas Gorski
  MAINTAINERS: add myself for spi-bcm63xx
  spi: s3c64xx: clear loopback bit after loopback test
  spi: bcm63xx: fix max prepend length
  MAINTAINERS: Add myself as a maintainer for Microchip SPI

Pull regmap fix from Mark Brown:
 "One fix for an out of bounds access in the interupt code here"

* tag 'regmap-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-irq: Fix out-of-bounds access when allocating config buffers