As snd_ff.rx_bytes[] is unsigned int, and NSEC_PER_SEC is 1000000000L,
the second multiplication in

    ff->rx_bytes[port] * 8 * NSEC_PER_SEC / 31250

always overflows on 32-bit platforms, truncating the result.  Fix this
by precalculating "NSEC_PER_SEC / 31250", which is an integer constant.

Note that this assumes ff->rx_bytes[port] <= 16777.

Fixes: 19174295 ("ALSA: fireface: add transaction support")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210111130251.361335-2-geert+renesas@glider.beSigned-off-by: Takashi Iwai <tiwai@suse.de>

Currently hda on tegra30 fails to open a stream with an input/output error.

For example:
speaker-test -Dhw:0,3 -c 2

speaker-test 1.2.2

Playback device is hw:0,3
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
 0 - Front Left
Write error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Input/output error

The tegra-hda device was introduced in tegra30 but only utilized in
tegra124 until recent chips. Tegra210/186 work only due to a hardware
change. For this reason it is unknown when this issue first manifested.
Discussions with the hardware team show this applies to all current tegra
chips. It has been resolved in the tegra234, which does not have hda
support at this time.

The explanation from the hardware team is this:
Below is the striping formula referenced from HD audio spec.
   { ((num_channels * bits_per_sample) / number of SDOs) >= 8 }

The current issue is seen because Tegra HW has a problem with boundary
condition (= 8) for striping. The reason why it is not seen on
Tegra210/Tegra186 is because it uses max 2SDO lines. Max SDO lines is
read from GCAP register.

For the given stream (channels = 2, bps = 16);
ratio = (channels * bps) / NSDO = 32 / NSDO;

On Tegra30,      ratio = 32/4 = 8  (FAIL)
On Tegra210/186, ratio = 32/2 = 16 (PASS)
On Tegra194,     ratio = 32/4 = 8  (FAIL) ==> Earlier workaround was
applied for it

If Tegra210/186 is forced to use 4SDO, it fails there as well. So the
behavior is consistent across all these chips.

Applying the fix in [1] universally resolves this issue on tegra30-hda.
Tested on the Ouya game console and the tf201 tablet.

[1] commit 60019d8c ("ALSA: hda/tegra: workaround playback failure on
Tegra194")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ion Agorria <ion@agorria.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210108135913.2421585-3-pgwipeout@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Current implementation defaults the hda clocks to clk_m. This causes hda
to run too slow to operate correctly. Fix this by defaulting to pll_p and
setting the frequency to the correct rate.

This matches upstream t124 and downstream t30.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210108135913.2421585-2-pgwipeout@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

MIXART.txt has been converted to ReST and renamed. Fix the reference
in alsa-configuration.rst.

Fixes: 3d8e8186 ("ALSA: doc: ReSTize MIXART.txt")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210101221942.1068388-1-j.neuschaefer@gmx.netSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pioneer devices have both playback and capture streams sharing the
same iface/altsetting, and those need to be paired as implicit
feedback.  Instead of a half-baked (and broken) static quirk entry,
set up more generically for those devices by checking the number of
endpoints and the attribute of the secondary EP.

Fixes: bf6313a0 ("ALSA: usb-audio: Refactor endpoint management")
Reported-by: František Kučera <konference@frantovo.cz>
Link: https://lore.kernel.org/r/20210108075219.21463-6-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

There are devices that have multiple endpoints sharing the same
iface/altset not only for sync but also for the actual streams, and
the audioformat for such an endpoint needs to be handled with the
proper endpoint index; otherwise it confuses the endpoint management.

This patch extends the audioformat to annotate the endpoint index, and
put the proper ep_idx=1 to Pioneer device quirk entries accordingly.

Fixes: bf6313a0 ("ALSA: usb-audio: Refactor endpoint management")
Link: https://lore.kernel.org/r/20210108075219.21463-5-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The current endpoint handling assumed (more or less) a unique 1:1
relation between the endpoint and the iface/altset.  The exception was
the sync EP without the implicit feedback which has usually the
secondary EP of the same altset.  This works fine for most devices,
but it turned out that some unusual devices like Pinoeer's ones have
both playback and capture endpoints in the same iface/altsetting and
use both for the implicit feedback mode.  For handling such a case, we
need to extend the endpoint management to take the shared interface
into account.

This patch does that: it adds a new object snd_usb_iface_ref for
managing the reference counts of the each USB interface that is used
by each endpoint.  The interface setup is performed only once for the
(sharing) endpoints, and the doubly initialization is avoided.

Along with this, the resource release of endpoints and interface
refcounts are put into a single function, snd_usb_endpoint_free_all()
instead of looping in the caller side.

Fixes: bf6313a0 ("ALSA: usb-audio: Refactor endpoint management")
Link: https://lore.kernel.org/r/20210108075219.21463-4-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The implicit feedback mode needs to handle two endpoints and the
choice of the audioformat object for the sync EP is important since
this determines the compatibility of the hw_params.  The current code
uses the same audioformat object if both the main EP and the sync EP
point to the same iface/altsetting.  This was done in consideration of
the non-implicit-fb sync EP handling, and it doesn't match well with
the cases where actually to endpoints are defined in the sameiface /
altsetting like a few Pioneer devices.

Modify snd_usb_find_implicit_fb_sync_format() to pick up the
audioformat that is assigned in the counter-part substreams primarily,
so that the actual capture stream can be opened properly.  We keep the
same audioformat object only as a fallback in case nothing found,
though.

Fixes: 9fddc15e ("ALSA: usb-audio: Factor out the implicit feedback quirk code")
Link: https://lore.kernel.org/r/20210108075219.21463-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent change in the endpoint management moved the endpoint object
creation from the stream open time to the parser of the audio
descriptor.  It works fine for the standard audio, but it overlooked
the other places that create audio streams via quirks
(QUIRK_AUDIO_FIXED_ENDPOINT) like the reported a few Pioneer devices;
those call snd_usb_add_audio_stream() manually, hence they miss the
endpoints, eventually resulting in the error at opening streams.
Moreover, now the sync EP setup was moved to the explicit call of
snd_usb_audioformat_set_sync_ep(), and this needs to be added for
those places, too.

This patch addresses those regressions for quirks.  It adds a local
helper function add_audio_stream_from_fixed_fmt(), which does the all
needed tasks, and replaces the calls of snd_usb_add_audio_stream()
with this new function.

Fixes: 54cb3190 ("ALSA: usb-audio: Create endpoint objects at parsing phase")
Reported-by: František Kučera <konference@frantovo.cz>
Link: https://lore.kernel.org/r/20210108075219.21463-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v5.11-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.11

A collection of mostly driver specific fixes, plus a maintainership
update for TI and a fix for DAPM driver removal paths.

 * The HP ZBook Fury 15/17 G7 Mobile Workstation are using ALC285 codec
   which is using 0x04 to control mute LED and 0x01 to control micmute LED.

 * The right channel speaker is no sound and it needs to expose GPIO1 for
   initialing AMP.

Add quirks to support them.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210106130549.100532-1-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Clevo W35xSS_370SS with VIA codec has had the runtime PM problem that
looses the power state of some nodes after the runtime resume.  This
was worked around by disabling the default runtime PM via a denylist
entry.  Since 5.10.x made the runtime PM applied (casually) even
though it's disabled in the denylist, this problem was revisited.  The
result was that disabling power_save_node feature suffices for the
runtime PM problem.

This patch implements the disablement of power_save_node feature in
VIA codec for the device.  It also drops the former denylist entry,
too, as the runtime PM should work in the codec side properly now.

Fixes: b529ef24 ("ALSA: hda: Add Clevo W35xSS_370SS to the power_save blacklist")
Reported-by: Christian Labisch <clnetbox@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210104153046.19993-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

BOSS RC-505 (shown by lsusb as "Roland Corp. RC-505") does require the
same quirk as these other BOSS devices.

Without this quirk it is neither possible to capture audio from nor to
write audio to the RC-505. Both just result in an empty audio
stream. With these changes both capture and playback seem to work
quite fine. MIDI funtionality was not tested.
Tested-by: Harry Reinold <harry.reinold@posteo.de>
Signed-off-by: Timon Reinold <tirei@agon.one>
Link: https://lore.kernel.org/r/20210102210835.21268-1-tirei@agon.oneSigned-off-by: Takashi Iwai <tiwai@suse.de>

The silent_stream_disable() function introduced by the commit
b1a50397 ("ALSA: hda/hdmi: fix silent stream for first playback to
DP") takes the per_pin->lock mutex, but it unlocks the wrong one,
spec->pcm_lock, which causes a deadlock.  This patch corrects it.

Fixes: b1a50397 ("ALSA: hda/hdmi: fix silent stream for first playback to DP")
Reported-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: <stable@vger.kernel.org>
Acked-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210101083852.12094-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

HP EliteBook 850 G7 uses the same GPIO pins as ALC285_FIXUP_HP_GPIO_LED
to enable mute and micmute LED. So apply the quirk to enable the LEDs.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201230125636.45028-1-kai.heng.feng@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add two "Intel Reference boad" SSID in the alc256.
Enable "power saving mode" and Enable "headset jack mode".
Signed-off-by: PeiSen Hou <pshou@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5978d2267f034c28973d117925ec9c63@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

HP Pavilion 13-bb0000 (SSID 103c:87c8) needs the same
quirk as other models with ALC287.
Signed-off-by: Manuel Jiménez <mjbfm99@me.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/X+s/gKNydVrI6nLj@HP-Pavilion-13Signed-off-by: Takashi Iwai <tiwai@suse.de>

The current kernel does not support the cx11970 codec chip.
Add a codec configuration item to kernel.

[ Minor coding style fix by tiwai ]
Signed-off-by: bo liu <bo.liu@senarytech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201229035226.62120-1-bo.liu@senarytech.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

BOSS AD-10 requires the very same quirk like other BOSS devices to
enable the special implicit feedback mode.
Reported-and-tested-by: Martin Passing <martin@passing.name>
Link: https://lore.kernel.org/r/20201229083428.20467-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The ThinkPad X395 latop does not have the internal digital
microphone connected to the AMD's ACP bridge, but it's advertised
via BIOS. The internal microphone is connected to the HDA codec.

Use DMI to block the microphone PCM device for this platform.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1892115
Cc: <stable@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20201227164109.269973-1-perex@perex.czSigned-off-by: Mark Brown <broonie@kernel.org>

When we try to play and capture simultaneously we see that
interrupts are genrated but our handler is not being acknowledged,
After investigating further more in detail on this issue we found
that IRQ delivery via MSI from the ACP IP is unreliable and so sometimes
interrupt generated will not be acknowledged so MSI model shouldn't be used
and using legacy IRQs will resolve interrupt handling issue.

This patch replaces MSI interrupt handling with legacy IRQ model.

Issue can be reproduced easily by running below python script:

import subprocess
import time
import threading

def do2():
  cmd = 'aplay -f dat -D hw:2,1 /dev/zero -d 1'
    subprocess.call(cmd, stdin=subprocess.PIPE,
			stderr=subprocess.PIPE, shell=True)
    print('Play Done')

def run():
	for i in range(1000):
		do2()

def do(i):
    cmd = 'arecord -f dat -D hw:2,2 /dev/null -d 1'
    subprocess.call(cmd, stdout=subprocess.PIPE,
			stderr=subprocess.PIPE, shell=True)
    print(datetime.datetime.now(), i)

t = threading.Thread(target=run)
t.start()
for i in range(1000):
	do(i)

t.join()

After applying this patch issue is resolved.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20201222115929.11222-1-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

The ThinkPad E14 Gen 2 latop does not have the internal digital
microphone connected to the AMD's ACP bridge, but it's advertised
via BIOS. The internal microphone is connected to the HDA codec.

Use DMI to block the microphone PCM device for this platform.
Reported-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20201227164037.269893-1-perex@perex.czSigned-off-by: Mark Brown <broonie@kernel.org>

Linux 5.11-rc1

Since commit 36e2c742 ("fs: don't allow splice read/write without
explicit ops") we've required that file operation structures explicitly
enable splice support, rather than falling back to the default handlers.

Most /proc files use the indirect 'struct proc_ops' to describe their
file operations, and were fixed up to support splice earlier in commits
40be821d..b24c30c6, but the mountinfo files interact with the
VFS directly using their own 'struct file_operations' and got missed as
a result.

This adds the necessary support for splice to work for /proc/*/mountinfo
and friends.
Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NTB fixes from Jon Mason:
 "Bug fix for IDT NTB and Intel NTB LTR management support"

* tag 'ntb-5.11' of git://github.com/jonmason/ntb:
  ntb: intel: add Intel NTB LTR vendor support for gen4 NTB
  ntb: idt: fix error check in ntb_hw_idt.c

Pull crypto fixes from Herbert Xu:
 "Fix a number of autobuild failures due to missing Kconfig
  dependencies"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: qat - add CRYPTO_AES to Kconfig dependencies
  crypto: keembay - Add dependency on HAS_IOMEM
  crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY

Pull objtool fix from Ingo Molnar:
 "Fix a segfault that occurs when built with Clang"

* tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix seg fault with Clang non-section symbols

Pull locking fixes from Ingo Molnar:
 "Misc fixes/updates:

   - Fix static keys usage in module __init sections

   - Add separate MAINTAINERS entry for static branches/calls

   - Fix lockdep splat with CONFIG_PREEMPTIRQ_EVENTS=y tracing"

* tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  softirq: Avoid bad tracing / lockdep interaction
  jump_label/static_call: Add MAINTAINERS
  jump_label: Fix usage in module __init

Pull timer fixes from Ingo Molnar:
 "Update/fix two CPU sanity checks in the hotplug and the boot code, and
  fix a typo in the Kconfig help text.

  [ Context: the first two commits are the result of an ongoing
    annotation+review work of (intentional) tick_do_timer_cpu() data
    races reported by KCSAN, but the annotations aren't fully cooked
    yet ]"

* tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill"
  tick/sched: Remove bogus boot "safety" check
  tick: Remove pointless cpu valid check in hotplug code

Pull scheduler fix from Ingo Molnar:
 "Fix a context switch performance regression"

* tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Optimize finish_lock_switch()

Commit c9a3c4e6 ("mfd: ab8500-debugfs: Remove extraneous curly
brace") removed a left-over curly brace that caused build failures, but
Joe Perches points out that the subsequent 'seq_putc()' should also be
removed, because the commit that caused all these problems already added
the final '\n' to the seq_printf() above it.
Reported-by: Joe Perches <joe@perches.com>
Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull PCI fixes from Bjorn Helgaas:

 - Fix a tegra enumeration regression (Rob Herring)

 - Fix a designware-host check that warned on *success*, not failure
   (Alexander Lobakin)

* tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: dwc: Fix inverted condition of DMA mask setup warning
  PCI: tegra: Fix host link initialization

Clang errors:

  drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type]
          }
          ^
  drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '('
  return 0;
          ^
  drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}')
  }
  ^
  3 errors generated.

The cleanup in ab8500_interrupts_show left a curly brace around, remove
it to fix the error.

Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address
allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask
for MSI message mapping, but for now it throws a warning on ret == 0, while
dma_set_mask() returns 0 in case of success.

Fix this by inverting the condition.

[bhelgaas: join string to make it greppable]
Fixes: 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation")
Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.meSigned-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Commit b9ac0f9d ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common
code") broke enumeration of downstream devices on Tegra:

In non-working case (next-20201211):

  0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1)
  0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
  0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1)

In working case (v5.10-rc7):

  0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1)
  0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
  0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1)
  0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
  0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
  0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab)

The problem seems to be dw_pcie_setup_rc() is now called twice before and
after the link up handling. The fix is to move Tegra's link up handling to
.start_link() function like other DWC drivers. Tegra is a bit more
complicated than others as it re-inits the whole DWC controller to retry
the link. With this, the initialization ordering is restored to match the
prior sequence.

Fixes: b9ac0f9d ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code")
Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.orgReported-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Vidya Sagar <vidyas@nvidia.com>

clang (quite rightly) complains fairly loudly about the newly added
mpc1_get_mpc_out_mux() function returning an uninitialized value if the
'opp_id' checks don't pass.

This may not happen in practice, but the code really shouldn't return
garbage if the sanity checks don't pass.

So just initialize 'val' to zero to avoid the issue.

Fixes: 110b055b ("drm/amd/display: add getter routine to retrieve mpcc mux")
Cc: Josip Pavic <Josip.Pavic@amd.com>
Cc: Bindu Ramamurthy <bindu.r@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Refactor 'perf stat' per CPU/socket/die/thread aggregation fixing use
   cases in ARM machines.

 - Fix memory leak when synthesizing SDT probes in 'perf probe'.

 - Update kernel header copies related to KVM, epol_pwait. msr-index and
   powerpc and s390 syscall tables.

* tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (24 commits)
  perf probe: Fix memory leak when synthesizing SDT probes
  perf stat aggregation: Add separate thread member
  perf stat aggregation: Add separate core member
  perf stat aggregation: Add separate die member
  perf stat aggregation: Add separate socket member
  perf stat aggregation: Add separate node member
  perf stat aggregation: Start using cpu_aggr_id in map
  perf cpumap: Drop in cpu_aggr_map struct
  perf cpumap: Add new map type for aggregation
  perf stat: Replace aggregation ID with a struct
  perf cpumap: Add new struct for cpu aggregation
  perf cpumap: Use existing allocator to avoid using malloc
  perf tests: Improve topology test to check all aggregation types
  perf tools: Update s390's syscall.tbl copy from the kernel sources
  perf tools: Update powerpc's syscall.tbl copy from the kernel sources
  perf s390: Move syscall.tbl check into check-headers.sh
  perf powerpc: Move syscall.tbl check to check-headers.sh
  tools headers UAPI: Synch KVM's svm.h header with the kernel
  tools kvm headers: Update KVM headers from the kernel sources
  tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
  ...

Pull coccinelle updates from Julia Lawall.

* 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccicheck: Correct usage of make coccicheck
  coccinelle: update expiring email addresses
  coccinnelle: Remove ptr_ret script
  kbuild: do not use scripts/ld-version.sh for checking spatch version
  remove boolinit.cocci

Commit 64a1b95b ("genirq: Restrict export of irq_to_desc()") removed
the export of irq_to_desc() unless powerpc KVM is being built, because
there is still a use of irq_to_desc() in modular code there.

However it used:

  #ifdef CONFIG_KVM_BOOK3S_64_HV

Which doesn't work when that symbol is =m, leading to a build failure:

  ERROR: modpost: "irq_to_desc" [arch/powerpc/kvm/kvm-hv.ko] undefined!

Fix it by checking for the definedness of the correct symbol which is
CONFIG_KVM_BOOK3S_64_HV_MODULE.

Fixes: 64a1b95b ("genirq: Restrict export of irq_to_desc()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>