We no longer need local->defrag_sem as all DATA packet transmission is now
done from one thread, so remove it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

call->tx_buffer is now only accessed within the I/O thread (->tx_sendmsg is
the way sendmsg passes packets to the I/O thread) so there's no need to
lock around it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Now that general ACK transmission is done from the same thread as incoming
DATA packet wrangling, there's no possibility that the SACK table will be
being updated by the latter whilst the former is trying to copy it to an
ACK.

This means that we can safely rotate the SACK table whilst updating it
without having to take a lock, rather than keeping all the bits inside it
in fixed place and copying and then rotating it in the transmitter.

Therefore, simplify SACK handing by keeping track of starting point in the
ring and rotate slots down as we consume them.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

call->ackr_window doesn't need to be atomic as ACK generation and ACK
transmission are now done in the same thread, so drop the atomic64 handling
and split it into two separate members.

Similarly, call->ackr_nr_unacked doesn't need to be atomic now either.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

When doing a call that has a single transmitted data packet and a massive
amount of received data packets, we only ping for one RTT sample, which
means we don't get a good reading on it.

Fix this by converting occasional IDLE ACKs into PING ACKs to elicit a
response.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

If CONFIG_AF_RXRPC_DEBUG_RX_DELAY=y, then a delay is injected between
packets and errors being received and them being made available to the
processing code, thereby allowing the RTT to be artificially increased.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Convert call->recvmsg_lock to a spinlock as it's only ever write-locked.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Shrink the tabulation in the rxrpc trace header a bit to allow for fields
with long type names that have been removed.
Signed-off-by: David Howells <dhowells@redhat.com>

Work around checkpatch warnings in the rxrpc trace header by removing
whitespace before ')' on lines defining the trace record struct.
Signed-off-by: David Howells <dhowells@redhat.com>

Fix a trace string to indicate that it's discarding the local endpoint for
a preallocated peer, not a preallocated connection.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Jakub Kicinski says:

====================
devlink: fix reload notifications and remove features

First two patches adjust notifications during devlink reload.
The last patch removes no longer needed devlink features.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>

Devlink features were introduced to disallow devlink reload calls of
userspace before the devlink was fully initialized. The reason for this
workaround was the fact that devlink reload was originally called
without devlink instance lock held.

However, with recent changes that converted devlink reload to be
performed under devlink instance lock, this is redundant so remove
devlink features entirely.

Note that mlx5 used this to enable devlink reload conditionally only
when device didn't act as multi port slave. Move the multi port check
into mlx5_devlink_reload_down() callback alongside with the other
checks preventing the device from reload in certain states.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the notifications are only sent for params. People who
introduced other objects forgot to add the reload notifications here.

To make sure all notifications happen according to existing comment,
benefit from existence of devlink_notify_register/unregister() helpers
and use them in reload code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This effectively reverts commit 05a7f4a8 ("devlink: Break parameter
notification sequence to be before/after unload/load driver").

Cited commit resolved a problem in mlx5 params implementation,
when param notification code accessed memory previously freed
during reload.

Now, when the params can be registered and unregistered when devlink
instance is registered, mlx5 code unregisters the problematic param
during devlink reload. The fix is therefore no longer needed.

Current behavior is a it problematic, as it sends DEL notifications even
in potential case when reload_down() call fails which might confuse
userspace notifications listener.

So move the reload notifications back where they were originally in
between reload_down() and reload_up() calls.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steen Hegelund says:

====================
Adding Sparx5 ES2 VCAP support

This provides the Egress Stage 2 (ES2) VCAP (Versatile Content-Aware
Processor) support for the Sparx5 platform.

The ES2 VCAP is an Egress Access Control VCAP that uses frame keyfields and
previously classified keyfields to apply e.g. policing, trapping or
mirroring to frames.

The ES2 VCAP has 2 lookups and they are accessible with a TC chain id:

- chain 20000000: ES2 Lookup 0
- chain 20100000: ES2 Lookup 1

As the other Sparx5 VCAPs the ES2 VCAP has its own lookup/port keyset
configuration that decides which keys will be used for matching on which
traffic type.

The ES2 VCAP has these traffic classifications:

- IPv4 frames
- IPv6 frames
- Other frames

The ES2 VCAP can match on an ISDX key (Ingress Service Index) as one of the
frame metadata keyfields.  The IS0 VCAP can update this key using its
actions, and this allows a IS0 VCAP rule to be linked to an ES2 rule.

This is similar to how the IS0 VCAP and the IS2 VCAP use the PAG
(Policy Association Group) keyfield to link rules.

From user space this is exposed via "chain offsets", so an IS0 rule with a
"goto chain 20000015" action will use an ISDX key value of 15 to link to a
rule in the ES2 VCAP attached to the same chain id.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This enhances the KUNIT test of the VCAP API with tests of the chaining
functionality.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This enables the TC command to use the Sparx5 ES2 VCAP, and provides a new
ES2 ethertype table and handling of rule links between IS0 and ES2.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows the check of the goto action to be specific to the ingress and
egress VCAP instances.

The debugfs support is also updated to show this information.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds the ES2 VCAP port keyset configuration for Sparx5 and also
updates the debugFS support to show the keyset configuration and the egress
port mask.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This provides the VCAP model for the Sparx5 ES2 (Egress Stage 2) VCAP.

This VCAP provides tagging and remarking functionality

This also renames a VCAP keyfield: VCAP_KF_MIRROR_ENA becomes
VCAP_KF_MIRROR_PROBE, as the first name was caused by a mistake in the
model transformation.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This improves the error message when a TC filter with CVLAN tag is used and
the selected VCAP instance does not support this.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This ensures that it will be possible for a VCAP rule to distinguish IPv6
frames from non-IP frames, as the IS0 keyset usually selected for the IPv6
traffic class in (7TUPLE) does not offer a key that specifies IPv6
directly: only non-IPv4.

The IP_SNAP key ensures that we select (at least) IP frames.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When there is only one keyset available for a certain VCAP rule size, the
particular keyset does not need a type id when encoded in the VCAP
Hardware.

This provides support for getting a keyset from a rule, when this is the
case: only one keyset fits this rule size.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
This feature/cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - drop prandom.h includes, by Sven Eckelmann

 - fix mailing list address, by Sven Eckelmann

 - multicast feature preparation, by Linus Lüssing (2 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Occasionnaly we may get oversized packets from the hardware which
exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early
check which drops the packet to avoid invoking skb_over_panic() and move
on to processing the next packet.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver can be trivially converted, as it only triggers the gpio
pin briefly to do a reset, and it already only supports DT.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

By using __clk_is_enabled () we can avoid defining an own variable for
tracking whether enable counter is zero.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For large ranges (outside of s16) the documentation currently
recommends open-coding the validation, but it's better to use
the NLA_POLICY_FULL_RANGE() or NLA_POLICY_FULL_RANGE_SIGNED()
policy validation instead; recommend that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230127084506.09f280619d64.I5dece85f06efa8ab0f474ca77df9e26d3553d4ab@changeidSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
bpf-next 2023-01-28

We've added 124 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 6386 insertions(+), 1827 deletions(-).

The main changes are:

1) Implement XDP hints via kfuncs with initial support for RX hash and
   timestamp metadata kfuncs, from Stanislav Fomichev and
   Toke Høiland-Jørgensen.
   Measurements on overhead: https://lore.kernel.org/bpf/875yellcx6.fsf@toke.dk

2) Extend libbpf's bpf_tracing.h support for tracing arguments of
   kprobes/uprobes and syscall as a special case, from Andrii Nakryiko.

3) Significantly reduce the search time for module symbols by livepatch
   and BPF, from Jiri Olsa and Zhen Lei.

4) Enable cpumasks to be used as kptrs, which is useful for tracing
   programs tracking which tasks end up running on which CPUs
   in different time intervals, from David Vernet.

5) Fix several issues in the dynptr processing such as stack slot liveness
   propagation, missing checks for PTR_TO_STACK variable offset, etc,
   from Kumar Kartikeya Dwivedi.

6) Various performance improvements, fixes, and introduction of more
   than just one XDP program to XSK selftests, from Magnus Karlsson.

7) Big batch to BPF samples to reduce deprecated functionality,
   from Daniel T. Lee.

8) Enable struct_ops programs to be sleepable in verifier,
   from David Vernet.

9) Reduce pr_warn() noise on BTF mismatches when they are expected under
   the CONFIG_MODULE_ALLOW_BTF_MISMATCH config anyway, from Connor O'Brien.

10) Describe modulo and division by zero behavior of the BPF runtime
    in BPF's instruction specification document, from Dave Thaler.

11) Several improvements to libbpf API documentation in libbpf.h,
    from Grant Seltzer.

12) Improve resolve_btfids header dependencies related to subcmd and add
    proper support for HOSTCC, from Ian Rogers.

13) Add ipip6 and ip6ip decapsulation support for bpf_skb_adjust_room()
    helper along with BPF selftests, from Ziyang Xuan.

14) Simplify the parsing logic of structure parameters for BPF trampoline
    in the x86-64 JIT compiler, from Pu Lehui.

15) Get BTF working for kernels with CONFIG_RUST enabled by excluding
    Rust compilation units with pahole, from Martin Rodriguez Reboredo.

16) Get bpf_setsockopt() working for kTLS on top of TCP sockets,
    from Kui-Feng Lee.

17) Disable stack protection for BPF objects in bpftool given BPF backends
    don't support it, from Holger Hoffstätte.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (124 commits)
  selftest/bpf: Make crashes more debuggable in test_progs
  libbpf: Add documentation to map pinning API functions
  libbpf: Fix malformed documentation formatting
  selftests/bpf: Properly enable hwtstamp in xdp_hw_metadata
  selftests/bpf: Calls bpf_setsockopt() on a ktls enabled socket.
  bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt().
  bpf/selftests: Verify struct_ops prog sleepable behavior
  bpf: Pass const struct bpf_prog * to .check_member
  libbpf: Support sleepable struct_ops.s section
  bpf: Allow BPF_PROG_TYPE_STRUCT_OPS programs to be sleepable
  selftests/bpf: Fix vmtest static compilation error
  tools/resolve_btfids: Alter how HOSTCC is forced
  tools/resolve_btfids: Install subcmd headers
  bpf/docs: Document the nocast aliasing behavior of ___init
  bpf/docs: Document how nested trusted fields may be defined
  bpf/docs: Document cpumask kfuncs in a new file
  selftests/bpf: Add selftest suite for cpumask kfuncs
  selftests/bpf: Add nested trust selftests suite
  bpf: Enable cpumasks to be queried and used as kptrs
  bpf: Disallow NULLable pointers for trusted kfuncs
  ...
====================

Link: https://lore.kernel.org/r/20230128004827.21371-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch removes the msleep(4s) during netpoll_setup() if the carrier
appears instantly.

Here are some scenarios where this workaround is counter-productive in
modern ages:

Servers which have BMC communicating over NC-SI via the same NIC as gets
used for netconsole. BMC will keep the PHY up, hence the carrier
appearing instantly.

The link is fibre, SERDES getting sync could happen within 0.1Hz, and
the carrier also appears instantly.

Other than that, if a driver is reporting instant carrier and then
losing it, this is probably a driver bug.
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230125185230.3574681-1-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Conflicts:

drivers/net/ethernet/intel/ice/ice_main.c
  418e5340 ("ice: move devlink port creation/deletion")
  643ef23b ("ice: Introduce local var for readability")
https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/
https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/

drivers/net/ethernet/engleder/tsnep_main.c
  3d53aaef ("tsnep: Fix TX queue stop/wake for multiple queues")
  25faa6a4 ("tsnep: Replace TX spin_lock with __netif_tx_lock")
https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/

net/netfilter/nf_conntrack_proto_sctp.c
  13bd9b31 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"")
  a44b7651 ("netfilter: conntrack: unify established states for SCTP paths")
  f71cb8f4 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets")
https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/
https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix description for tristate and help sections which include inaccurate
information.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230126190110.9124-1-arinc.unal@arinc9.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Magnus Karlsson says:

====================
net: xdp: execute xdp_do_flush() before napi_complete_done()

Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found in [1].

The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in [2].

The drivers have only been compile-tested since I do not own any of
the HW below. So if you are a maintainer, it would be great if you
could take a quick look to make sure I did not mess something up.

Note that these were the drivers I found that violated the ordering by
running a simple script and manually checking the ones that came up as
potential offenders. But the script was not perfect in any way. There
might still be offenders out there, since the script can generate
false negatives.

[1] https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
[2] https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
====================

Link: https://lore.kernel.org/r/20230125074901.2737-1-magnus.karlsson@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.

The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.

Fixes: d678be1d ("dpaa2-eth: add XDP_REDIRECT support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.

The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.

Fixes: a1e031ff ("dpaa_eth: add XDP_REDIRECT support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.

The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.

Fixes: 186b3c99 ("virtio-net: support XDP_REDIRECT")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.

The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.

Fixes: a825b611 ("net: lan966x: Add support for XDP_REDIRECT")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.

The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.

Fixes: d1b25b79 ("qede: add .ndo_xdp_xmit() and XDP_REDIRECT support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Reset stdio before printing verbose log of the SIGSEGV'ed test.
Otherwise, it's hard to understand what's going on in the cases like [0].

With the following patch applied:

	--- a/tools/testing/selftests/bpf/prog_tests/xdp_metadata.c
	+++ b/tools/testing/selftests/bpf/prog_tests/xdp_metadata.c
	@@ -392,6 +392,11 @@ void test_xdp_metadata(void)
	 		       "generate freplace packet"))
	 		goto out;

	+
	+	ASSERT_EQ(1, 2, "oops");
	+	int *x = 0;
	+	*x = 1; /* die */
	+
	 	while (!retries--) {
	 		if (bpf_obj2->bss->called)
	 			break;

Before:

 #281     xdp_metadata:FAIL
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x1f)[0x55c919d98bcf]
/lib/x86_64-linux-gnu/libc.so.6(+0x3bf90)[0x7f36aea5df90]
./test_progs(test_xdp_metadata+0x1db0)[0x55c919d8c6d0]
./test_progs(+0x23b438)[0x55c919d9a438]
./test_progs(main+0x534)[0x55c919d99454]
/lib/x86_64-linux-gnu/libc.so.6(+0x2718a)[0x7f36aea4918a]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85)[0x7f36aea49245]
./test_progs(_start+0x21)[0x55c919b82ef1]

After:

test_xdp_metadata:PASS:ip netns add xdp_metadata 0 nsec
open_netns:PASS:malloc token 0 nsec
open_netns:PASS:open /proc/self/ns/net 0 nsec
open_netns:PASS:open netns fd 0 nsec
open_netns:PASS:setns 0 nsec
..
test_xdp_metadata:FAIL:oops unexpected oops: actual 1 != expected 2
 #281     xdp_metadata:FAIL
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x1f)[0x562714a76bcf]
/lib/x86_64-linux-gnu/libc.so.6(+0x3bf90)[0x7fa663f9cf90]
./test_progs(test_xdp_metadata+0x1db0)[0x562714a6a6d0]
./test_progs(+0x23b438)[0x562714a78438]
./test_progs(main+0x534)[0x562714a77454]
/lib/x86_64-linux-gnu/libc.so.6(+0x2718a)[0x7fa663f8818a]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85)[0x7fa663f88245]
./test_progs(_start+0x21)[0x562714860ef1]

0: https://github.com/kernel-patches/bpf/actions/runs/4019879316/jobs/6907358876Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230127215705.1254316-1-sdf@google.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

This adds documentation for the following API functions:

- bpf_map__set_pin_path()
- bpf_map__pin_path()
- bpf_map__is_pinned()
- bpf_map__pin()
- bpf_map__unpin()
- bpf_object__pin_maps()
- bpf_object__unpin_maps()
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230126024225.520685-1-grantseltzer@gmail.com