- 05 Aug, 2014 14 commits
-
-
Willem de Bruijn authored
Kernel transmit latency is often incurred in the packet scheduler. Introduce a new timestamp on transmission just before entering the scheduler. When data travels through multiple devices (bonding, tunneling, ...) each device will export an individual timestamp. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Datagrams timestamped on transmission can coexist in the kernel stack and be reordered in packet scheduling. When reading looped datagrams from the socket error queue it is not always possible to unique correlate looped data with original send() call (for application level retransmits). Even if possible, it may be expensive and complex, requiring packet inspection. Introduce a data-independent ID mechanism to associate timestamps with send calls. Pass an ID alongside the timestamp in field ee_data of sock_extended_err. The ID is a simple 32 bit unsigned int that is associated with the socket and incremented on each send() call for which software tx timestamp generation is enabled. The feature is enabled only if SOF_TIMESTAMPING_OPT_ID is set, to avoid changing ee_data for existing applications that expect it 0. The counter is reset each time the flag is reenabled. Reenabling does not change the ID of already submitted data. It is possible to receive out of order IDs if the timestamp stream is not quiesced first. Signed-off-by:
-
Willem de Bruijn authored
sk_flags is reaching its limit. New timestamping options will not fit. Move all of them into a new field sk->sk_tsflags. Added benefit is that this removes boilerplate code to convert between SOF_TIMESTAMPING_.. and SOCK_TIMESTAMPING_.. in getsockopt/setsockopt. SOCK_TIMESTAMPING_RX_SOFTWARE is also used to toggle the receive timestamp logic (netstamp_needed). That can be simplified and this last key removed, but will leave that for a separate patch. Signed-off-by:
-
Willem de Bruijn authored
Applications that request kernel tx timestamps with SO_TIMESTAMPING read timestamps as recvmsg() ancillary data. The response is defined implicitly as timespec[3]. 1) define struct scm_timestamping explicitly and 2) add support for new tstamp types. On tx, scm_timestamping always accompanies a sock_extended_err. Define previously unused field ee_info to signal the type of ts[0]. Introduce SCM_TSTAMP_SND to define the existing behavior. The reception path is not modified. On rx, no struct similar to sock_extended_err is passed along with SCM_TIMESTAMPING. Signed-off-by:
-
Anish Bhatt authored
These belong to the t4 msg header, will ensure there is no accidental code duplication in the future Signed-off-by:
Anish Bhatt <anish@chelsio.com> Signed-off-by:
-
Neal Cardwell authored
This commit reduces spurious retransmits due to apparent SACK reneging by only reacting to SACK reneging that persists for a short delay. When a sequence space hole at snd_una is filled, some TCP receivers send a series of ACKs as they apparently scan their out-of-order queue and cumulatively ACK all the packets that have now been consecutiveyly received. This is essentially misbehavior B in "Misbehaviors in TCP SACK generation" ACM SIGCOMM Computer Communication Review, April 2011, so we suspect that this is from several common OSes (Windows 2000, Windows Server 2003, Windows XP). However, this issue has also been seen in other cases, e.g. the netdev thread "TCP being hoodwinked into spurious retransmissions by lack of timestamps?" from March 2014, where the receiver was thought to be a BSD box. Since snd_una would temporarily be adjacent to a previously SACKed range in these scenarios, this receiver behavior triggered the Linux SACK reneging code path in the sender. This led the sender to clear the SACK scoreboard, enter CA_Loss, and spuriously retransmit (potentially) every packet from the entire write queue at line rate just a few milliseconds before the ACK for each packet arrives at the sender. To avoid such situations, now when a sender sees apparent reneging it does not yet retransmit, but rather adjusts the RTO timer to give the receiver a little time (max(RTT/2, 10ms)) to send us some more ACKs that will restore sanity to the SACK scoreboard. If the reneging persists until this RTO then, as before, we clear the SACK scoreboard and enter CA_Loss. A 10ms delay tolerates a receiver sending such a stream of ACKs at 56Kbit/sec. And to allow for receivers with slower or more congested paths, we wait for at least RTT/2. We validated the resulting max(RTT/2, 10ms) delay formula with a mix of North American and South American Google web server traffic, and found that for ACKs displaying transient reneging: (1) 90% of inter-ACK delays were less than 10ms (2) 99% of inter-ACK delays were less than RTT/2 In tests on Google web servers this commit reduced reneging events by 75%-90% (as measured by the TcpExtTCPSACKReneging counter), without any measurable impact on latency for user HTTP and SPDY requests. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
David S. Miller authored
Zoltan Kiss says: ==================== xen-netback: Changes around carrier handling This series starts using carrier off as a way to purge packets when the guest is not able (or willing) to receive them. It is a much faster way to get rid of packets waiting for an overwhelmed guest. The first patch changes current netback code where it relies currently on netif_carrier_ok. The second turns off the carrier if the guest times out on a queue, and only turn it on again if that queue (or queues) resurrects. ==================== Signed-off-by:
Zoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Zoltan Kiss authored
Currently when the guest is not able to receive more packets, qdisc layer starts a timer, and when it goes off, qdisc is started again to deliver a packet again. This is a very slow way to drain the queues, consumes unnecessary resources and slows down other guests shutdown. This patch change the behaviour by turning the carrier off when that timer fires, so all the packets are freed up which were stucked waiting for that vif. Instead of the rx_queue_purge bool it uses the VIF_STATUS_RX_PURGE_EVENT bit to signal the thread that either the timeout happened or an RX interrupt arrived, so the thread can check what it should do. It also disables NAPI, so the guest can't transmit, but leaves the interrupts on, so it can resurrect. Only the queues which brought down the interface can enable it again, the bit QUEUE_STATUS_RX_STALLED makes sure of that. Signed-off-by:
-
Zoltan Kiss authored
This patch introduces a new state bit VIF_STATUS_CONNECTED to track whether the vif is in a connected state. Using carrier will not work with the next patch in this series, which aims to turn the carrier temporarily off if the guest doesn't seem to be able to receive packets. Signed-off-by:
-
David S. Miller authored
Merge tag 'master-2014-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next Conflicts: net/6lowpan/iphc.c Minor conflicts in iphc.c were changes overlapping with some style cleanups. John W. Linville says: ==================== Please pull this last(?) batch of wireless change intended for the 3.17 stream... For the NFC bits, Samuel says: "This is a rather quiet one, we have: - A new driver from ST Microelectronics for their NCI ST21NFCB, including device tree support. - p2p support for the ST21NFCA driver - A few fixes an enhancements for the NFC digital laye" For the Atheros bits, Kalle says: "Michal and Janusz did some important RX aggregation fixes, basically we were missing RX reordering altogether. The 10.1 firmware doesn't support Ad-Hoc mode and Michal fixed ath10k so that it doesn't advertise Ad-Hoc support with that firmware. Also he implemented a workaround for a KVM issue." For the Bluetooth bits, Gustavo and Johan say: "To quote Gustavo from his previous request: 'Some last minute fixes for -next. We have a fix for a use after free in RFCOMM, another fix to an issue with ADV_DIRECT_IND and one for ADV_IND with auto-connection handling. Last, we added support for reading the codec and MWS setting for controllers that support these features.' Additionally there are fixes to LE scanning, an update to conform to the 4.1 core specification as well as fixes for tracking the page scan state. All of these fixes are important for 3.17." And, "We've got: - 6lowpan fixes/cleanups - A couple crash fixes, one for the Marvell HCI driver and another in LE SMP. - Fix for an incorrect connected state check - Fix for the bondable requirement during pairing (an issue which had crept in because of using "pairable" when in fact the actual meaning was "bondable" (these have different meanings in Bluetooth)" Along with those are some late-breaking hardware support patches in brcmfmac and b43 as well as a stray ath9k patch. ==================== Signed-off-by:
-
Ricardo Ribalda authored
After this patch: [ 32.985530] hso: drivers/net/usb/hso.c: Option Wireless [ 33.000452] hso 2-1.4:1.7: Not our interface [ 33.001849] usbcore: registered new interface driver hso root@qt5022:~# ls /dev/ttyHS* /dev/ttyHS0 /dev/ttyHS1 /dev/ttyHS2 /dev/ttyHS3 /dev/ttyHS4 /dev/ttyHS5 root@qt5022:~# lsusb -d 0af0: -vvv Bus 002 Device 003: ID 0af0:9200 Option Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0af0 Option idProduct 0x9200 bcdDevice 0.00 iManufacturer 3 Option N.V. iProduct 2 Globetrotter HSUPA Modem iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 200 bNumInterfaces 8 bConfigurationValue 1 iConfiguration 1 Option Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x08 EP 8 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Signed-off-by:Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Hans Wennborg authored
Signed-off-by:
Hans Wennborg <hans@hanshq.net> Signed-off-by:
-
Hans Wennborg authored
Signed-off-by:
Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by:
-
Eric Dumazet authored
With netlink_lookup() conversion to RCU, we need to use appropriate rcu dereference in netlink_seq_socket_idx() & netlink_seq_next() Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: e341694e ("netlink: Convert netlink_lookup() to use RCU protected hash table") Signed-off-by:
-
- 04 Aug, 2014 6 commits
-
-
Dmitry Popov authored
tcpm_key is an array inside struct tcp_md5sig, there is no need to check it against NULL. Signed-off-by:
Dmitry Popov <ixaphire@qrator.net> Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
KY Srinivasan authored
Intel did some benchmarking on our network throughput when Linux on Hyper-V is as used as a gateway. This fix gave us almost a 1 Gbps additional throughput on about 5Gbps base throughput we hadi, prior to increasing the sendbuf size. The sendbuf mechanism is a copy based transport that we have which is clearly more optimal than the copy-free page flipping mechanism (for small packets). In the forwarding scenario, we deal only with MTU sized packets, and increasing the size of the senbuf area gave us the additional performance. For what it is worth, Windows guests on Hyper-V, I am told use similar sendbuf size as well. The exact value of sendbuf I think is less important than the fact that it needs to be larger than what Linux can allocate as physically contiguous memory. Thus the change over to allocating via vmalloc(). We currently allocate 16MB receive buffer and we use vmalloc there for allocation. Also the low level channel code has already been modified to deal with physically dis-contiguous memory in the ringbuffer setup. Based on experimentation Intel did, they say there was some improvement in throughput as the sendbuf size was increased up to 16MB and there was no effect on throughput beyond 16MB. Thus I have chosen 16MB here. Increasing the sendbuf value makes a material difference in small packet handling In this version of the patch, based on David's feedback, I have added additional details in the commit log. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Francois Romieu authored
Leftover from 5c601d0c ("wireless: move zd1201 where it belongs"). Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Himangi Saraogi authored
This patch introduces the use of devm_kzalloc and does away with the kfrees in the probe and remove functions. Also, a label is removed. Signed-off-by:
Himangi Saraogi <himangi774@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Michael S. Tsirkin authored
commit 6cbdceeb bridge: Dump vlan information from a bridge port introduced a comment in an attempt to explain the code logic. The comment is unfinished so it confuses more than it explains, remove it. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
- 03 Aug, 2014 20 commits
-
-
Anish Bhatt authored
As pointed out by the intel guys, there is no need to hold rcu read lock in cxgbi_inet6addr_handler(), this patch removes it. Fixes: 759a0cc5 ("cxgb4i: Add ipv6 code to driver, call into libcxgbi ipv6 api") Signed-off-by:
-
David S. Miller authored
Thomas Graf says: ==================== Lockless netlink_lookup() with new concurrent hash table Netlink sockets are maintained in a hash table to allow efficient lookup via the port ID for unicast messages. However, lookups currently require a read lock to be taken. This series adds a new generic, resizable, scalable, concurrent hash table based on the paper referenced in the first patch. It then makes use of the new data type to implement lockless netlink_lookup(). Patch 3/3 to convert nft_hash is included for reference but should be merged via the netfilter tree. Inclusion in this series is to provide context for the suggested API. Against net-next since the initial user of the new hash table is in net/ Changes: v4-v5: - use GFP_KERNEL to alloc Netlink buckets as suggested by Nikolay Aleksandrov - free nft hash element on removal as spotted by Nikolay Aleksandrov and Patrick McHardy v3-v4: - fixed wrong shift assignment placement as spotted by Nikolay Aleksandrov - reverted default size of nft_hash to 4 as requested by Patrick McHardy, default size for other hash tables remains at 64 if no hint is given - fixed copyright as requested by Patrick McHardy v2-v3: - fixed typo in nft_hash_destroy() when passing rhashtable handle v1-v2: - fixed traversal off-by-one as spotted by Tobias Klauser - removed unlikely() from BUG_ON() as spotted by Josh Triplett - new 3rd patch to convert nft_hash to rhashtable - make rhashtable_insert() return void - nl_sk_hash_lock must be a mutex - fixed wrong name of rht_shrink_below_30() - exported symbols rht_grow_above_75() and rht_shrink_below_30() - allow table freeing with RCU callback ==================== Signed-off-by: -
Thomas Graf authored
The sizing of the hash table and the practice of requiring a lookup to retrieve the pprev to be stored in the element cookie before the deletion of an entry is left intact. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
Patrick McHardy <kaber@trash.net> Reviewed-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
Thomas Graf authored
Heavy Netlink users such as Open vSwitch spend a considerable amount of time in netlink_lookup() due to the read-lock on nl_table_lock. Use of RCU relieves the lock contention. Makes use of the new resizable hash table to avoid locking on the lookup. The hash table will grow if entries exceeds 75% of table size up to a total table size of 64K. It will automatically shrink if usage falls below 30%. Also splits nl_table_lock into a separate mutex to protect hash table mutations and allow synchronize_rcu() to sleep while waiting for readers during expansion and shrinking. Before: 9.16% kpktgend_0 [openvswitch] [k] masked_flow_lookup 6.42% kpktgend_0 [pktgen] [k] mod_cur_headers 6.26% kpktgend_0 [pktgen] [k] pktgen_thread_worker 6.23% kpktgend_0 [kernel.kallsyms] [k] memset 4.79% kpktgend_0 [kernel.kallsyms] [k] netlink_lookup 4.37% kpktgend_0 [kernel.kallsyms] [k] memcpy 3.60% kpktgend_0 [openvswitch] [k] ovs_flow_extract 2.69% kpktgend_0 [kernel.kallsyms] [k] jhash2 After: 15.26% kpktgend_0 [openvswitch] [k] masked_flow_lookup 8.12% kpktgend_0 [pktgen] [k] pktgen_thread_worker 7.92% kpktgend_0 [pktgen] [k] mod_cur_headers 5.11% kpktgend_0 [kernel.kallsyms] [k] memset 4.11% kpktgend_0 [openvswitch] [k] ovs_flow_extract 4.06% kpktgend_0 [kernel.kallsyms] [k] _raw_spin_lock 3.90% kpktgend_0 [kernel.kallsyms] [k] jhash2 [...] 0.67% kpktgend_0 [kernel.kallsyms] [k] netlink_lookup Signed-off-by:
-
Thomas Graf authored
Generic implementation of a resizable, scalable, concurrent hash table based on [0]. The implementation supports both, fixed size keys specified via an offset and length, or arbitrary keys via own hash and compare functions. Lookups are lockless and protected as RCU read side critical sections. Automatic growing/shrinking based on user configurable watermarks is available while allowing concurrent lookups to take place. Objects to be hashed must include a struct rhash_head. The reason for not using the existing struct hlist_head is that the expansion and shrinking will have two buckets point to a single entry which would lead in obscure reverse chaining behaviour. Code includes a boot selftest if CONFIG_TEST_RHASHTABLE is defined. [0] https://www.usenix.org/legacy/event/atc11/tech/final_files/Triplett.pdfSigned-off-by:
-
David S. Miller authored
Aaron Brown says: ==================== Intel Wired LAN Driver Updates This series contains updates to the i40e and i40evf drivers. Vasu adds FCOE support, build options and a documentation pointer to i40e. Shannon exposes a Firmware API request used to do register writes on the driver's behalf and disables local loopback on VMDQ VSI in order to stop the VEB from echoing the VMDQ packets back at the VSI. Ashish corrects the vf_id offset for virtchnl messages in the case of multiple PFs, removes support for vf unicast promiscuos mode to disallow VFs from receiving traffic intended for another VF, updates the vfr_stat state check to handle the existing and future mechanism and adds an adapter state check to prevent re-arming the watchdog timer after i40evf_remove has been called and the timer has been deleted. Serey fixes an issue where a guest OS would panic when removing the vf driver while the device is being reset due to an attempt to clean a non initialized mac_filter_list. Akeem makes a minor comment change. Jessie changes an instance of sprintf to snprintf that was missed when the driver was converted to use snprintf everywhere. Mitch plugs a few memory leaks. ==================== Signed-off-by: -
Serey Kong authored
Removing VF driver during device still in reset caused guest OS panic. in the i40evf_remove(), we're trying to clean mac_filter_list which has not been initialized since the device is still stuck at the reset. The change is to initialize the filter_list before setting any task. Change-ID: I8b59df7384416c7e6f2d264b598f447e1c2c92b0 Signed-off-by:
Serey Kong <serey.kong@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Mitch Williams authored
If the driver is loaded and then unloaded before the interface is brought up, then it will allocate a MAC filter entry and never free it. To fix this, on unload, run through the mac filter list and free all the entries. We also do this during reset recovery when the driver cannot contact the PF and needs to shut down completely. Change-ID: I15fabd67eb4a1bfc57605a7db60d0b5d819839db Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Mitch Williams authored
Fix a memory leak. Driver was allocating memory for queue vectors on init but not freeing them on shutdown. These need to be freed at two different times: during module unload, and during reset recovery when the driver cannot contact the PF driver and needs to give up. Change-ID: I7c1d0157a776e960d4da432dfe309035aad7c670 Signed-off-by:
-
Ashish Shah authored
Add in an adapter state check to prevent re-arming watchdog timer after i40evf_remove has been called and timer has been deleted. Change-ID: I636ba7c6322be8cbf053231959f90c0a2d8d803a Signed-off-by:
Ashish Shah <ashish.n.shah@intel.com> Tested-by:
-
Ashish Shah authored
Previously defined state I40E_VFR_VFACTIVE uses bit 1 which is now set to "reserved." Update the state checks to also include I40E_VFR_COMPLETED. This change will allow the VF to work with both existing and future PFs. Change-ID: Ifd1d34f79f3b0ffd6d2550ee4dadc55825ff52f8 Signed-off-by:
-
Ashish Shah authored
Remove the ability of a VF to set unicast promiscuous mode. Considered to be a security risk to allow VFs to receive traffic intended for other VFs so don't allow it, simply ignore the flag. Also fix it to send the correct seid to aq for multicast promiscuous set. Change-ID: Icb9c49a281a8e9d3aeebf991ef1533ac82b84b14 Signed-off-by:
Jim Young <jamesx.m.young@intel.com> Signed-off-by:
-
Akeem G Abodunrin authored
Fixes comment for reset reason Change-ID: I6fda4fa292255e6eb0f874502b4d38d722149b10 Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by:
-
Jesse Brandeburg authored
The driver was converted to use snprintf everywhere but this one function. Just use snprintf, instead of sprintf. Also a small spelling correction in a comment. Change-ID: I59d45f94a52754c7b4cd6034df9a61d8132b7f77 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Shannon Nelson authored
The local loopback should only be enabled for VSIs that are supporting cascaded VEBs or VEPA setups. This is not the case here, and we need to stop the VEB from echoing the VMDQ VSI packets back at the VSI. Change-ID: I9dfb6ac79db24d04360d7efde62d81e20abc5090 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Ashish Shah authored
The vf_id needs to be offset by the vf_base_id from hw function capabilities for the case of multiple PFs. Change-ID: I20ca8621f98e9cdf98649380b8eeaa35db52677c Signed-off-by:
-
Shannon Nelson authored
Now that the HW registers are no longer in debug mode and many are locked down for writes, we need to expose the Firmware API request used to do writes on the driver's behalf. Change-ID: I09a05c4dc9ea0b24c00193faac34d7799eaa8496 Signed-off-by:
-
Vasu Dev authored
Adds newly added FCoE files to the build but only if FCoE module is configured. Also, updates i40e document for added FCoE support. Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Tested-by: Jack Morgan<jack.morgan@intel.com> Signed-off-by:
-
Vasu Dev authored
Adds FCoE specific code to existing i40e core driver to:- 1. have separate FCoE VSI with additional FCoE queues pairs. 2. have FCoE related hash defines. 3. have additional FCoE related stats code. 4. export and then re-use existing functions required by FCoE build. Signed-off-by:
-
Vasu Dev authored
This patch adds FCoE ( Fibre Channel Over Ethernet ) code for Intel XL710 adapters. This patch is limited to only new FCoE offloads code in newly added files by this patch and then following patches in the series modifies rest of the existing driver to enable FCoE with i40e driver. Signed-off-by:
-
