- 01 Dec, 2013 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML fixes from Richard Weinberger: "Fixes two regressions which got introduced this merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Build always with -mcmodel=large on 64bit um: Rename print_stack_trace to do_stack_trace
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Some ARM fixes, the biggest of which is the fix for the signal return codes; this came up due to an interaction between the V7M nommu changes and the BE8 changes. Dave Martin spotted that the kexec trampoline wasn't being correctly copied (in a way which allows Thumb-2 to work). I've also fixed a number of breakages on footbridge platforms as I've upgraded one of my machines to v3.12... one which had a 1200 day uptime" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 7907/1: lib: delay-loop: Add align directive to fix BogoMIPS calculation ARM: 7897/1: kexec: Use the right ISA for relocate_new_kernel ARM: 7895/1: signal: fix armv7-m build issue in sigreturn_codes.S ARM: footbridge: fix EBSA285 LEDs ARM: footbridge: fix VGA initialisation ARM: fix booting low-vectors machines ARM: dma-mapping: check DMA mask against available memory
-
Richard Weinberger authored
On UML SUBARCH can be x86, x86_64 and i386 and if it is x86 we use uname -m to select a defconfig. Therefore we can no longer use -mcmodel=large only if SUBARCH is x86_64. Reported-and-tested-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
Richard Weinberger <richard@nod.at>
-
Richard Weinberger authored
We cannot use print_stack_trace because the name conflicts with linux/stacktrace.h. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Richard Weinberger <richard@nod.at>
-
- 30 Nov, 2013 8 commits
-
-
Fabio Estevam authored
Currently mx53 (CortexA8) running at 1GHz reports: Calibrating delay loop... 663.55 BogoMIPS (lpj=3317760) Tom Evans verified that alignments of 0x0 and 0x8 run the two instructions of __loop_delay in one clock cycle (1 clock/loop), while alignments of 0x4 and 0xc take 3 clocks to run the loop twice. (1.5 clock/loop) The original object code looks like this: 00000010 <__loop_const_udelay>: 10: e3e01000 mvn r1, #0 14: e51f201c ldr r2, [pc, #-28] ; 0 <__loop_udelay-0x8> 18: e5922000 ldr r2, [r2] 1c: e0800921 add r0, r0, r1, lsr #18 20: e1a00720 lsr r0, r0, #14 24: e0822b21 add r2, r2, r1, lsr #22 28: e1a02522 lsr r2, r2, #10 2c: e0000092 mul r0, r2, r0 30: e0800d21 add r0, r0, r1, lsr #26 34: e1b00320 lsrs r0, r0, #6 38: 01a0f00e moveq pc, lr 0000003c <__loop_delay>: 3c: e2500001 subs r0, r0, #1 40: 8afffffe bhi 3c <__loop_delay> 44: e1a0f00e mov pc, lr After adding the 'align 3' directive to __loop_delay (align to 8 bytes): 00000010 <__loop_const_udelay>: 10: e3e01000 mvn r1, #0 14: e51f201c ldr r2, [pc, #-28] ; 0 <__loop_udelay-0x8> 18: e5922000 ldr r2, [r2] 1c: e0800921 add r0, r0, r1, lsr #18 20: e1a00720 lsr r0, r0, #14 24: e0822b21 add r2, r2, r1, lsr #22 28: e1a02522 lsr r2, r2, #10 2c: e0000092 mul r0, r2, r0 30: e0800d21 add r0, r0, r1, lsr #26 34: e1b00320 lsrs r0, r0, #6 38: 01a0f00e moveq pc, lr 3c: e320f000 nop {0} 00000040 <__loop_delay>: 40: e2500001 subs r0, r0, #1 44: 8afffffe bhi 40 <__loop_delay> 48: e1a0f00e mov pc, lr 4c: e320f000 nop {0} , which now reports: Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) Some more test results: On mx31 (ARM1136) running at 532 MHz, before the patch: Calibrating delay loop... 351.43 BogoMIPS (lpj=1757184) On mx31 (ARM1136) running at 532 MHz after the patch: Calibrating delay loop... 528.79 BogoMIPS (lpj=2643968) Also tested on mx6 (CortexA9) and on mx27 (ARM926), which shows the same BogoMIPS value before and after this patch. Reported-by:
Tom Evans <tom_usenet@optusnet.com.au> Suggested-by:
Tom Evans <tom_usenet@optusnet.com.au> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Dave Martin authored
Copying a function with memcpy() and then trying to execute the result isn't trivially portable to Thumb. This patch modifies the kexec soft restart code to copy its assembler trampoline relocate_new_kernel() using fncpy() instead, so that relocate_new_kernel can be in the same ISA as the rest of the kernel without problems. Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Reported-by:
Taras Kondratiuk <taras.kondratiuk@linaro.org> Tested-by:
Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Victor Kamensky authored
After "ARM: signal: sigreturn_codes should be endian neutral to work in BE8" commit, thumb only platforms, like armv7m, fails to compile sigreturn_codes.S. The reason is that for such arch values '.arm' directive and arm opcodes are not allowed. Fix conditionally enables arm opcodes only if no CONFIG_CPU_THUMBONLY defined and it uses .org instructions to keep sigreturn_codes layout. Suggested-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
Victor Kamensky <victor.kamensky@linaro.org> Tested-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
- The LEDs register is write-only: it can't be read-modify-written. - The LEDs are write-1-for-off not 0. - The check for the platform was inverted. Fixes: cf6856d6 ("ARM: mach-footbridge: retire custom LED code") Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Cc: stable@vger.kernel.org
-
Russell King authored
It's no good setting vga_base after the VGA console has been initialised, because if we do that we get this: Unable to handle kernel paging request at virtual address 000b8000 pgd = c0004000 [000b8000] *pgd=07ffc831, *pte=00000000, *ppte=00000000 0Internal error: Oops: 5017 [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0+ #49 task: c03e2974 ti: c03d8000 task.ti: c03d8000 PC is at vgacon_startup+0x258/0x39c LR is at request_resource+0x10/0x1c pc : [<c01725d0>] lr : [<c0022b50>] psr: 60000053 sp : c03d9f68 ip : 000b8000 fp : c03d9f8c r10: 000055aa r9 : 4401a103 r8 : ffffaa55 r7 : c03e357c r6 : c051b460 r5 : 000000ff r4 : 000c0000 r3 : 000b8000 r2 : c03e0514 r1 : 00000000 r0 : c0304971 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel which is an access to the 0xb8000 without the PCI offset required to make it work. Fixes: cc22b4c1 ("ARM: set vga memory base at run-time") Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Cc: <stable@vger.kernel.org>
-
Russell King authored
Commit f6f91b0d (ARM: allow kuser helpers to be removed from the vector page) required two pages for the vectors code. Although the code setting up the initial page tables was updated, the code which allocates page tables for new processes wasn't, neither was the code which tears down the mappings. Fix this. Fixes: f6f91b0d ("ARM: allow kuser helpers to be removed from the vector page") Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Cc: <stable@vger.kernel.org>
-
Russell King authored
Some buses have negative offsets, which causes the DMA mask checks to falsely fail. Fix this by using the actual amount of memory fitted in the system. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Roberto Sassu authored
This patch stores the address of the 'template_fmt_copy' variable in a new variable, called 'template_fmt_ptr', so that the latter is passed as an argument of strsep() instead of the former. This modification is needed in order to correctly free the memory area referenced by 'template_fmt_copy' (strsep() modifies the pointer of the passed string). Signed-off-by:
Roberto Sassu <roberto.sassu@polito.it> Reported-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Mimi Zohar <zohar@us.ibm.com> Signed-off-by:
James Morris <james.l.morris@oracle.com>
-
- 29 Nov, 2013 13 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64Linus Torvalds authored
Pull ARM64 fixes from Catalin Marinas: - Remove preempt_count modifications in the arm64 IRQ handling code since that's already dealt with in generic irq_enter/irq_exit - PTE_PROT_NONE bit moved higher up to avoid overlapping with the hardware bits (for PROT_NONE mappings which are pte_present) - Big-endian fixes for ptrace support - Asynchronous aborts unmasking while in the kernel - pgprot_writecombine() change to create Normal NonCacheable memory rather than Device GRE * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Move PTE_PROT_NONE higher up arm64: Use Normal NonCacheable memory for writecombine arm64: debug: make aarch32 bkpt checking endian clean arm64: ptrace: fix compat registes get/set to be endian clean arm64: Unmask asynchronous aborts when in kernel mode arm64: dts: Reserve the memory used for secondary CPU release address arm64: let the core code deal with preempt_count
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Martin Schwidefsky: "One performance improvement and a few bug fixes. Two of the fixes deal with the clock related problems we have seen on recent kernels" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: handle asce-type exceptions as normal page fault s390,time: revert direct ktime path for s390 clockevent device s390/time,vdso: convert to the new update_vsyscall interface s390/uaccess: add missing page table walk range check s390/mm: optimize copy_page s390/dasd: validate request size before building CCW/TCW request s390/signal: always restore saved runtime instrumentation psw bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Some easy but needed fixes for i2c drivers since rc1" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: bcm2835: Linking platform nodes to adapter nodes i2c: omap: raw read and write endian fix i2c: i2c-bcm-kona: Fix module build i2c: i2c-diolan-u2c: different usb endpoints for DLN-2-U2C i2c: bcm-kona: remove duplicated include i2c: davinci: raw read and write endian fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fixes from Tejun Heo: "This contains one important fix. The NUMA support added a while back broke ordering guarantees on ordered workqueues. It was enforced by having single frontend interface with @max_active == 1 but the NUMA support puts multiple interfaces on unbound workqueues on NUMA machines thus breaking the ordered guarantee. This is fixed by disabling NUMA support on ordered workqueues. The above and a couple other patches were sitting in for-3.12-fixes but I forgot to push that out, so they ended up waiting a bit too long. My aplogies. Other fixes are minor" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix pool ID allocation leakage and remove BUILD_BUG_ON() in init_workqueues workqueue: fix comment typo for __queue_work() workqueue: fix ordered workqueues in NUMA setups workqueue: swap set_cpus_allowed_ptr() and PF_NO_SETAFFINITY
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: "libata device removal path was removing parent device node before its child, which is mostly harmless but triggers warning after recent sysfs changes. Rafael's patch fixes the order. Other than that, minor controller-specific fixes and device ID additions" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ATA: Fix port removal ordering ahci: add Marvell 9230 to the AHCI PCI device list ata: fix acpi_bus_get_device() return value check pata_arasan_cf: add missing clk_disable_unprepare() on error path ahci: add support for IBM Akebono platform device
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fixes from Tejun Heo: "Fixes for three issues. - cgroup destruction path could swamp system_wq possibly leading to deadlock. This actually seems to happen in the wild with memcg because memcg destruction path adds nested dependency on system_wq. Resolved by isolating cgroup destruction work items on its dedicated workqueue. - Possible locking context deadlock through seqcount reported by lockdep - Memory leak under certain conditions" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix cgroup_subsys_state leak for seq_files cpuset: Fix memory allocator deadlock cgroup: use a dedicated workqueue for cgroup destruction
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Quite a few HD-Audio fixes, a WUSB audio fix and a fix for FireWire audio. The HD-audio part contains a couple of fixes for the generic parser, and these are the only intrusive fixes. The rest are mostly device-specific fixes" * tag 'sound-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add LFE chmap to ASUS ET2700 ALSA: hda - Initialize missing bass speaker pin for ASUS AIO ET2700 ALSA: hda - limit mic boost on Asus UX31[A,E] ALSA: hda - Check leaf nodes to find aamix amps ALSA: hda - Fix hp-mic mode without VREF bits ALSA: hda - Create Headhpone Mic Jack Mode when really needed ALSA: usb: use multiple packets per urb for Wireless USB inbound audio ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Conexant codec ALSA: hda - Drop bus->avoid_link_reset flag ALSA: hda/realtek - Set pcbeep amp for ALC668 ALSA: hda/realtek - Add support of ALC231 codec ALSA: firewire-lib: fix wrong value for FDF field as an empty packet
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs dentry reference count fix from Al Viro. This fixes a possible inode_permission NULL pointer dereference (and other problems) that were due to the root dentry count being decremented too much. In commit 48a066e7 ("RCU'd vfsmounts") the placement of clearing the LOOKUP_RCU bit changed, and we then returned failure of incrementing the lockref on the parent dentry with LOOKUP_RCU cleared. But that meant we needed to go through the same cleanup routines that the later failures did wrt LOOKUP_ROOT and nd->root. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix bogus path_put() of nd->root after some unlazy_walk() failures
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm qxl leak fix from Dave Airlie: "As usual 5 mins after I send a trivial pull fix I find a real bug! This fixes a memory leak and I'd like to get it into stable queue asap" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/qxl: fix memory leak in release list handling
-
Catalin Marinas authored
PTE_PROT_NONE means that a pte is present but does not have any read/write attributes. However, setting the memory type like pgprot_writecombine() is allowed and such bits overlap with PTE_PROT_NONE. This causes mmap/munmap issues in drivers that change the vma->vm_pg_prot on PROT_NONE mappings. This patch reverts the PTE_FILE/PTE_PROT_NONE shift in commit 59911ca4 (ARM64: mm: Move PTE_PROT_NONE bit) and moves PTE_PROT_NONE together with the other software bits. Signed-off-by:
Steve Capper <steve.capper@linaro.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Tested-by:
Steve Capper <steve.capper@linaro.org> Cc: <stable@vger.kernel.org> # 3.11+
-
Catalin Marinas authored
This provides better performance compared to Device GRE and also allows unaligned accesses. Such memory is intended to be used with standard RAM (e.g. framebuffers) and not I/O. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Al Viro authored
Failure to grab reference to parent dentry should go through the same cleanup as nd->seq mismatch. As it is, we might end up with caller thinking it needs to path_put() nd->root, with obvious nasty results once we'd hit that bug enough times to drive the refcount of root dentry all the way to zero... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- 28 Nov, 2013 15 commits
-
-
Dave Airlie authored
wow no idea how I got this far without seeing this, leaking the entries in the list makes kmalloc-64 slab grow. References: https://bugzilla.kernel.org/show_bug.cgi?id=65121 Cc: stable@vger.kernel.org Reported-by:
Matthew Stapleton <matthew4196@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Matthew Leach authored
The current breakpoint instruction checking code for A32 is not endian clean. Fix this with appropriate byte-swapping when retrieving instructions. Signed-off-by:
Matthew Leach <matthew.leach@arm.com> Reviewed-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Matthew Leach authored
On a BE system the wrong half of the X registers is retrieved/written when attempting to get/set the value of aarch32 registers through ptrace. Ensure that types are the correct width so that the relevant casting occurs. Signed-off-by:
Matthew Leach <matthew.leach@arm.com> Reviewed-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Here us a bunch of patches for the v3.13 series. Most important stuff is related to fixes and documentation for the new GPIO descriptor API. If the diffstat is scary you'll notice most of it is to Documentation/*: - A big slew of documentation for the gpiod transition that happened in the merge window, no semantic effect, but we should provide proper documentation with the new API. - Fix flags related to the new API. - Fix to the find_chip_by_name() lookup function related to the new API. - Fix of_find_gpio() when not using device tree. - Bug fix for the TB10x direction setting. - Error path fixes from Dan Carpenter. - Nasty IRQdomain bug relating to taking an unitialized spinlock. - Minor fixes here and there" * tag 'gpio-v3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: bcm281xx: Fix return value of bcm_kona_gpio_get() gpio: pl061: move irqdomain initialization gpio: ucb1400: Add MODULE_ALIAS gpiolib: fix of_find_gpio() when OF not defined gpio: fix memory leak in error path gpio: rcar: NULL dereference on error in probe() gpio: msm: make msm_gpio.summary_irq signed for error handling gpio: mvebu: make mvchip->irqbase signed for error handling gpiolib: use dedicated flags for GPIO properties gpiolib: fix find_chip_by_name() Documentation: gpiolib: document new interface gpio: tb10x: Set output value before setting direction to output
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md fixes from Neil Brown: "Three bug fixes for md in 3.13-rc All recent regressions, one in 3.12 so marked for -stable" * tag 'md/3.13-fixes' of git://neil.brown.name/md: md/raid5: fix newly-broken locking in get_active_stripe. md: test mddev->flags more safely in md_check_recovery. md/raid5: fix new memory-reference bug in alloc_thread_groups.
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "SMB3 "validate negotiate" is needed to prevent certain types of downgrade attacks. Also changes SMB2/SMB3 copy offload from using the BTRFS copy ioctl (BTRFS_IOC_CLONE) to a cifs specific ioctl (CIFS_IOC_COPYCHUNK_FILE) to address Christoph's comment that there are semantic differences between requesting copy offload in which copy-on-write is mandatory (as in the BTRFS ioctl) and optional in the SMB2/SMB3 case. Also fixes SMB2/SMB3 copychunk for large files" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] Do not use btrfs refcopy ioctl for SMB2 copy offload Check SMB3 dialects against downgrade attacks Removed duplicated (and unneeded) goto CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files
-
Helge Deller authored
The init_kernel_text() and core_kernel_text() functions should not include the labels _einittext and _etext when checking if an address is inside the .text or .init sections. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Takashi Iwai authored
As the previous commit 1f0bbf03 added the pin config for the bass speaker, this patch adds the corresponding LFE-only channel map on ASUS ET2700. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65961Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Add a fixup entry for the missing bass speaker pin 0x16 on ASUS ET2700 AiO desktop. The channel map will be added in the next patch, so that this can be backported easily to stable kernels. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65961 Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Oleksij Rempel authored
This both devices need limit for internal dmic. [cosmetic change; renamed fixup name by tiwai] Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The current generic parser assumes blindly that the volume and mute amps are found in the aamix node itself. But on some codecs, typically Analog Devices ones, the aamix amps are separately implemented in each leaf node of the aamix node, and the current driver can't establish the correct amp controls. This is a regression compared with the previous static quirks. This patch extends the search for the amps to the leaf nodes for allowing the aamix controls again on such codecs. In this implementation, I didn't code to loop through the whole paths, since usually one depth should suffice, and we can't search too deeply, as it may result in the conflicting control assignments. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65641 Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Florian Meier authored
In order to find I2C devices in the device tree, the platform nodes have to be known by the I2C core. This requires setting the dev.of_node parameter of the adapter. Signed-off-by:
Florian Meier <florian.meier@koalo.de> Tested-by:
Stephen Warren <swarren@wwwdotorg.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Just two minor fixes as people keep resending since they are so low hanging" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/hwmon: fix compilation without CONFIG_HWMON drm/sysfs: fix OOM verification
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some tty/serial driver fixes for reported issues in 3.13-rc2. The n_gsm "fix" was reverted as it was found to not be correct. Hopefully this will be resolved in a future pull request, but as there's really only one user of this line setting, it's not a big deal..." * tag 'tty-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "n_gsm: race between ld close and gsmtty open" n_tty: Protect minimum_to_wake reset for concurrent readers tty: Reset hupped state on open TTY: amiserial, add missing platform check TTY: pmac_zilog, check existence of ports in pmz_console_init() n_gsm: race between ld close and gsmtty open tty/serial/8250: fix typo in help text n_tty: Fix 4096-byte canonical reads n_tty: Fix echo overrun tail computation n_tty: Ensure reader restarts worker for next reader
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging fixes from Greg KH: "Here are a number of staging, and IIO driver, fixes for 3.13-rc2 that resolve issues that have been reported for 3.13-rc1. All of these have been in linux-next for a bit this week" * tag 'staging-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (25 commits) Staging: tidspbridge: disable driver staging: zsmalloc: Ensure handle is never 0 on success staging/lustre/ptlrpc: fix ptlrpc_stop_pinger logic staging: r8188eu: Fix AP mode Staging: btmtk_usb: Add hdev parameter to hdev->send driver callback Staging: go7007: fix up some remaining go->dev issues staging: imx-drm: Fix modular build of DRM_IMX_IPUV3 staging: ft1000: fix use of potentially uninitialized variable Revert "staging:media: Use dev_dbg() instead of pr_debug()" Staging: zram: Fix memory leak by refcount mismatch staging: vt6656: [BUG] Fix for TX USB resets from vendors driver. staging: nvec: potential NULL dereference on error path Staging: vt6655-6: potential NULL dereference in hostap_disable_hostapd() staging: comedi: s626: fix value written by s626_set_dac() Staging: comedi: pcl730: fix some bitwise vs logical AND bugs staging: comedi: fix potentially uninitialised variable iio:accel:kxsd9 fix missing mutex unlock iio: adc: ti_am335x_adc: avoid double free of buffer. staging:iio: Fix hmc5843 Kconfig dependencies iio: Fix tcs3472 Kconfig dependencies ...
-