- 09 Sep, 2022 2 commits
-
-
Guo Zhengkui authored
Fix the following coccicheck warning: drivers/gpu/drm/omapdrm/dss/dispc.c:2454:21-22: WARNING opportunity for max() Signed-off-by:
Guo Zhengkui <guozhengkui@vivo.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220517050208.121488-1-guozhengkui@vivo.com
-
Maxime Ripard authored
Commit ec491291 ("drm/sun4i: tv: Merge mode_set into atomic_enable") has introduced a call to drm_atomic_get_new_crtc_state(), but didn't include drm_atomic.h. On CONFIG_OF systems, this is fine because drm_atomic.h is included by drm_of.h through drm_bridge.h. However, whenever CONFIG_OF isn't set, we end up with a compilation error. Fixes: ec491291 ("drm/sun4i: tv: Merge mode_set into atomic_enable") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220909093116.4141982-1-maxime@cerno.tech
-
- 08 Sep, 2022 4 commits
-
-
Imre Deak authored
When an MST connector stays enabled during a commit the connector's MST state needs to be added to the atomic state, but the corresponding MST payload allocation shouldn't be set for deletion; fix such modesets by ensuring the above even if the connector was already enabled before the modeset. The issue led to the following: [ 761.992923] i915 0000:00:02.0: drm_WARN_ON(payload->delete) [ 761.992949] WARNING: CPU: 6 PID: 1401 at drivers/gpu/drm/display/drm_dp_mst_topology.c:4221 drm_dp_atomic_find_time_slots+0x236/0x280 [drm_display_helper] [ 761.992955] Modules linked in: snd_hda_intel i915 drm_buddy drm_display_helper drm_kms_helper ttm drm snd_hda_codec_hdmi snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm prime_numbers i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops x86_pkg_temp_thermal cdc_ether coretemp crct10dif_pclmul usbnet crc32_pclmul mii ghash_clmulni_intel e1000e mei_me ptp i2c_i801 pps_core mei i2c_smbus intel_lpss_pci fuse [last unloaded: drm] [ 761.992986] CPU: 6 PID: 1401 Comm: testdisplay Tainted: G U 6.0.0-rc4-imre+ #565 [ 761.992989] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.3135.A00.2203251419 03/25/2022 [ 761.992990] RIP: 0010:drm_dp_atomic_find_time_slots+0x236/0x280 [drm_display_helper] [ 761.992994] Code: 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 03 28 4e e1 48 c7 c1 8b 26 2c a0 4c 89 e2 48 c7 c7 a8 26 2c a0 48 89 c6 e8 31 d5 88 e1 <0f> 0b 49 8b 85 d0 00 00 00 4c 89 fa 48 c7 c6 a0 41 2c a0 48 8b 78 [ 761.992995] RSP: 0018:ffffc9000177ba60 EFLAGS: 00010286 [ 761.992998] RAX: 0000000000000000 RBX: ffff88810d2f1540 RCX: 0000000000000000 [ 761.992999] RDX: 0000000000000001 RSI: ffffffff82368a25 RDI: 00000000ffffffff [ 761.993000] RBP: ffff888142299d80 R08: ffff8884adbfdfe8 R09: 00000000ffefffff [ 761.993001] R10: ffff8884a6bfe000 R11: ffff8884ac443c30 R12: ffff888102972f90 [ 761.993002] R13: ffff8881163e2cf0 R14: 00000000000003ac R15: ffff88810c501000 [ 761.993003] FS: 00007f81e4c459c0(0000) GS:ffff888496500000(0000) knlGS:0000000000000000 [ 761.993004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 761.993005] CR2: 0000555dac962a98 CR3: 0000000123a34006 CR4: 0000000000770ee0 [ 761.993006] PKRU: 55555554 [ 761.993007] Call Trace: [ 761.993009] <TASK> [ 761.993012] intel_dp_mst_compute_config+0x19a/0x350 [i915] [ 761.993090] intel_atomic_check+0xf37/0x3180 [i915] [ 761.993168] drm_atomic_check_only+0x5d3/0xa60 [drm] [ 761.993182] drm_atomic_commit+0x56/0xc0 [drm] [ 761.993192] ? drm_plane_get_damage_clips.cold+0x1c/0x1c [drm] [ 761.993204] drm_atomic_helper_set_config+0x78/0xc0 [drm_kms_helper] [ 761.993214] drm_mode_setcrtc+0x1ed/0x750 [drm] [ 761.993232] ? drm_mode_getcrtc+0x180/0x180 [drm] [ 761.993241] drm_ioctl_kernel+0xb5/0x150 [drm] [ 761.993252] drm_ioctl+0x203/0x3d0 [drm] [ 761.993261] ? drm_mode_getcrtc+0x180/0x180 [drm] [ 761.993276] __x64_sys_ioctl+0x8a/0xb0 [ 761.993281] do_syscall_64+0x38/0x90 [ 761.993285] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 761.993287] RIP: 0033:0x7f81e551aaff [ 761.993288] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00 [ 761.993290] RSP: 002b:00007fff4304af10 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 761.993292] RAX: ffffffffffffffda RBX: 00007fff4304afa0 RCX: 00007f81e551aaff [ 761.993293] RDX: 00007fff4304afa0 RSI: 00000000c06864a2 RDI: 0000000000000004 [ 761.993294] RBP: 00000000c06864a2 R08: 0000000000000000 R09: 0000555dac8a9c68 [ 761.993294] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000008c4 [ 761.993295] R13: 0000000000000004 R14: 0000555dac8a9c68 R15: 00007fff4304b098 [ 761.993301] </TASK> Fixes: 083351e9 ("drm/display/dp_mst: Fix modeset tracking in drm_dp_atomic_release_vcpi_slots()") Testcase: igt@testdisplay Cc: Lyude Paul <lyude@redhat.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907142542.1681994-1-imre.deak@intel.com
-
Chen-Yu Tsai authored
This panel has the same delay timing as N116BCA-EA1 from the same company, which is also the same as delay_200_500_e80_d50. Add an entry for it. Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Maxime Ripard authored
Our mode_set implementation can be merged into our atomic_enable implementation to simplify things, so let's do this. Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Javier Martinez Canillas authored
The simple display pipeline is a set of helpers that can be used by DRM drivers to avoid dealing with all the needed components and just define a few functions to operate a simple display device with one full-screen scanout buffer feeding a single output. But it is arguable that this provides the correct level of abstraction for simple drivers, and recently some have been ported from using these simple display helpers to use the regular atomic helpers instead. The rationale for this is that the simple display pipeline helpers don't hide that much of the DRM complexity, while adding an indirection layer that conflates the concepts of CRTCs and planes. This makes the helpers less flexible and harder to be reused among different graphics drivers. Also, for simple drivers, using the full atomic helpers doesn't require a lot of additional code. So adding a simple display pipeline layer may not be worth it. For these reasons, let's follow that trend and make ssd130x a plain DRM driver that creates its own primary plane, CRTC, enconder and connector. Suggested-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
-
- 07 Sep, 2022 17 commits
-
-
Jilin Yuan authored
Delete the redundant word 'for'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907113927.35305-1-yuanjilin@cdjrlc.com
-
Zongmin Zhou authored
Details: Currently, when trying to suspend and resume with qxl device， there are some error messages after resuming, eventually caused to black screen and can't be recovered. The first error message: [ 64.668577][ C3] [drm] driver is in bug mode This error is due to guest qxl driver will call qxl_reinit_memslots(qdev) during system resume, but didn't call qxl_io_reset(qdev) before this, Then will cause the QXL_IO_MEMSLOT_ADD operation to fail on QEMU, qxl->guest_bug flag will be set，As a result, the QXL device can't communicate with guest qxl driver through the IO port. after fix the first error,can success to resume and login to desktop, but shortly after that will observe the second error message : [ 353.095343][ T863] qxl 0000:00:02.0: object_init failed for (262144, 0x00000001) [ 353.096660][ T863] [drm:qxl_gem_object_create [qxl]] *ERROR* Failed to allocate GEM object (260852, 1, 4096, -12) [ 353.097277][ T863] [drm:qxl_alloc_ioctl [qxl]] *ERROR* qxl_alloc_ioctl: failed to create gem ret=-12 [ 368.197538][ T863] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001) [ 368.197541][ T863] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO The problem is caused by calling qxl_ring_init_hdr(qdev->release_ring) in qxl_drm_resume() function. When do QXL_IO_RESET,QEMU will call init_qxl_ram(), so params like prod,cons,notify_on_cons and notify_on_prod will be set to default value. Ring push/pop actions for release_ring can be performed normally. But call qxl_ring_init_hdr(qdev->release_ring) will eventually set notify_on_prod to number of QXL_RELEASE_RING_SIZE, affect the value of notify in qxl_push_free_res() function always be false, QEMU will no longer send events of QXL_INTERRUPT_DISPLAY to the guest qxl driver，so qxl_ring_pop() will never been called anymore， and can't do dma_fence_signal(),result to ttm_bo_wait_ctx(bo, ctx) always return EBUSY,fail to call qxl_bo_create(). Test scenario: 1) start virtual machine with qemu command "-device qxl-vga" 2) click suspend botton to enter suspend mode 3) resume and observe the error message in kernel logs,screen will be black Let's fix this by reset io and remove the qxl_ring_init_hdr calling. Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn> Suggested-by: Ming Xie<xieming@kylinos.cn> Link: http://patchwork.freedesktop.org/patch/msgid/20220907094423.93581-1-min_halo@163.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Gerd Hoffmann authored
VGA_IS1_RC is the color mode register (VGA_IS1_RM the one for monochrome mode, note C vs. M at the end). So when using VGA_IS1_RC make sure the vga device is actually in color mode and set the corresponding bit in the misc register. Reproducible when booting VMs in UEFI mode with some edk2 versions (edk2 fix is on the way too). Doesn't happen in BIOS mode because in that case the vgabios already flips the bit. Fixes: 250e7439 ("drm/bochs: Add screen blanking support") Signed-off-by:
-
Chia-I Wu authored
Without this, the drm core advertises LINEAR modifier which is incorrect. Also userspace virgl does not support modifiers. For example, it causes chrome on ozone/drm to fail with "Failed to create scanout buffer". Fixes: 2af10429 ("drm: introduce fb_modifiers_not_supported flag in mode_config") Suggested-by:
Shao-Chuan Lee <shaochuan@chromium.org> Signed-off-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220831190601.1295129-1-olvaffe@gmail.comSigned-off-by:
-
Maxime Ripard authored
The reset line is deasserted at bind, and asserted if we ever encounter an error there. However, it's never asserted in unbind which will lead to a resource unbalance. Reviewed-by:
-
Maxime Ripard authored
The other error labels in sun4i_tv_bind() are named after the task they perform (err_disable_clk to call clk_disable_unprepare for example). However, the err_cleanup_connector is named after the calling site (drm_connector_init failing) and will actually cleanup the encoder. Let's rename it to err_cleanup_encoder to be consistent. Reviewed-by:
-
Maxime Ripard authored
Our destroy implementation is just calling the generic helper, so let's just remove our function and directly use the helper. Reviewed-by:
-
Maxime Ripard authored
The drm_connector_to_sun4i_tv() function isn't used anywhere in the driver, so let's remove it. Acked-by:
-
Maxime Ripard authored
The sun4i TV driver still uses legacy enable and disable hook implementation. Let's convert to the atomic variants. Acked-by:
-
Maxime Ripard authored
The mode_valid implementation is pretty much a nop, let's remove it. Reviewed-by:
-
Mateusz Kwiatkowski authored
This commit fixes vertical timings of the VEC (composite output) modes to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R standards. Previous timings were actually defined as 502 and 601 lines, resulting in non-standard 62.69 Hz and 52 Hz signals being generated, respectively. Signed-off-by:Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Acked-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Mateusz Kwiatkowski authored
Let's remove the superfluous tv_mode field, which was redundant with the mode field in struct drm_tv_connector_state. Signed-off-by:
-
Mateusz Kwiatkowski authored
Change the mode_set function pointer logic to declarative config0, config1 and custom_freq fields, to make TV mode setting logic more concise and uniform. Signed-off-by:
-
Maxime Ripard authored
The VC4 VEC driver still uses legacy enable and disable hook implementation. Let's convert to the atomic variants. Reviewed-by:
-
Maxime Ripard authored
The mode_fixup hooks are deprecated, and the behaviour we implement is the default one anyway. Let's remove it. Reviewed-by:
-
Li zeming authored
The variable ret is assigned in the judgment branch statement, he does not need to initialize the assignment. Signed-off-by:
Li zeming <zeming@nfschina.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907032934.4490-1-zeming@nfschina.comReviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alisa Khabibrakhmanova authored
Pointer dev_priv->mmio, which was checked for NULL at via_do_init_map(), is passed to via_do_cleanup_map() and is dereferenced there without check. The patch adds the condition in via_dma_cleanup() which prevents potential NULL pointer dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 22f579c6 ("drm: Add via unichrome support") Signed-off-by:
Alisa Khabibrakhmanova <khabibrakhmanova@ispras.ru> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220729090643.240778-1-khabibrakhmanova@ispras.ru
-
- 06 Sep, 2022 3 commits
-
-
Douglas Anderson authored
Ever since I got the spell-check working in my editor this one has been bugging me. Fix it. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720162314.1.Ieef5bc3848df40b71605b70bb571d6429e8978de@changeid
-
Randy Dunlap authored
Fix kernel-doc warnings in gpu_scheduler.h and sched_main.c. Quashes these warnings: include/drm/gpu_scheduler.h:332: warning: missing initial short description on line: * struct drm_sched_backend_ops include/drm/gpu_scheduler.h:412: warning: missing initial short description on line: * struct drm_gpu_scheduler include/drm/gpu_scheduler.h:461: warning: Function parameter or member 'dev' not described in 'drm_gpu_scheduler' drivers/gpu/drm/scheduler/sched_main.c:201: warning: missing initial short description on line: * drm_sched_dependency_optimized drivers/gpu/drm/scheduler/sched_main.c:995: warning: Function parameter or member 'dev' not described in 'drm_sched_init' Fixes: 2d33948e ("drm/scheduler: add documentation") Fixes: 8ab62eda ("drm/sched: Add device pointer to drm_gpu_scheduler") Fixes: 542cff78 ("drm/sched: Avoid lockdep spalt on killing a processes") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: Nayan Deshmukh <nayan26deshmukh@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Jiawei Gu <Jiawei.Gu@amd.com> Cc: dri-devel@lists.freedesktop.org Acked-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220404213040.12912-1-rdunlap@infradead.org
-
Xin Ji authored
Some panels trigger HPD irq due to noise, the HPD debounce may be 1.8ms, exceeding the default irq detect window, ~1.4ms. This patch set HPD irq detection window to 2ms to tolerate the HPD noise. Signed-off-by:
Xin Ji <xji@analogixsemi.com> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
- 05 Sep, 2022 12 commits
-
-
Igor Torrente authored
This commit also adds new helper macros to deal with fixed-point arithmetic. It was done to improve the precision of the conversion to ARGB16161616 since the "conversion ratio" is not an integer. V3: Adapt the handlers to the new format introduced in patch 7 V3. V5: Minor improvements V6: Minor improvements (Pekka Paalanen) Reviewed-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Igor Torrente <igormtorrente@gmail.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-10-igormtorrente@gmail.com
-
Igor Torrente authored
This will be useful to write tests that depends on these formats. ARGB and XRGB follows the a similar implementation of the former formats. Just adjusting for 16 bits per channel. V3: Adapt the handlers to the new format introduced in patch 7 V3. V5: Minor improvements Added le16_to_cpu/cpu_to_le16 to the 16 bits color read/writes. Reviewed-by: -
Igor Torrente authored
We will remove the current assumption that the primary plane has the same size and position as CRTC and that the primary plane is the bottom-most in zpos order, or is even enabled. At least as far as the blending machinery is concerned. For that we will add CRTC dimension information to `vkms_crtc_state` and add a opaque black backgound color. Because now we need to fill the background, we had a loss in performance with this change. Results running the IGT[1] test `igt@kms_cursor_crc@pipe-a-cursor-512x512-onscreen` ten times: | Frametime | |:--------------------------------------------:| | Implementation | Previous | This commit | |:---------------:|:---------:|:--------------:| | frametime range | 5~18 ms | 10~22 ms | | Average | 8.47 ms | 12.32 ms | [1] IGT commit id: bc3f6833a12221a46659535dac06ebb312490eb4 V6: Improve the commit description (Pekka Paalanen). Update some comments (Pekka Paalanen). Remove some fields from `vkms_crtc_state` and move where some variables are set (Pekka Paalanen). Reviewed-by: -
Igor Torrente authored
Currently the blend function only accepts XRGB_8888 and ARGB_8888 as a color input. This patch refactors all the functions related to the plane composition to overcome this limitation. The pixels blend is done using the new internal format. And new handlers are being added to convert a specific format to/from this internal format. So the blend operation depends on these handlers to convert to this common format. The blended result, if necessary, is converted to the writeback buffer format. This patch introduces three major differences to the blend function. 1 - All the planes are blended at once. 2 - The blend calculus is done as per line instead of per pixel. 3 - It is responsible to calculates the CRC and writing the writeback buffer(if necessary). These changes allow us to allocate way less memory in the intermediate buffer to compute these operations. Because now we don't need to have the entire intermediate image lines at once, just one line is enough. | Memory consumption (output dimensions) | |:--------------------------------------:| | Current | This patch | |:------------------:|:-----------------:| | Width * Heigth | 2 * Width | Beyond memory, we also have a minor performance benefit from all these changes. Results running the IGT[1] test `igt@kms_cursor_crc@pipe-a-cursor-512x512-onscreen` ten times: | Frametime | |:------------------------------------------:| | Implementation | Current | This commit | |:---------------:|:---------:|:------------:| | frametime range | 9~22 ms | 5~17 ms | | Average | 11.4 ms | 7.8 ms | [1] IGT commit id: bc3f6833a12221a46659535dac06ebb312490eb4 V2: Improves the performance drastically, by performing the operations per-line and not per-pixel(Pekka Paalanen). Minor improvements(Pekka Paalanen). V3: Changes the code to blend the planes all at once. This improves performance, memory consumption, and removes much of the weirdness of the V2(Pekka Paalanen and me). Minor improvements(Pekka Paalanen and me). V4: Rebase the code and adapt it to the new NUM_OVERLAY_PLANES constant. V5: Minor checkpatch fixes and the removal of TO-DO item(Melissa Wen). Several security/robustness improvents(Pekka Paalanen). Removes check_planes_x_bounds function and allows partial partly off-screen(Pekka Paalanen). V6: Fix a mismatch of some variable sizes (Pekka Paalanen). Several minor improvements (Pekka Paalanen). Reviewed-by: -
Igor Torrente authored
This commit is the groundwork to introduce new formats to the planes and writeback buffer. As part of it, a new buffer metadata field is added to `vkms_writeback_job`, this metadata is represented by the `vkms_frame_info` struct. Also adds two new function pointers (`line_to_frame_func` and `frame_to_line_func`) are defined to handle format conversion from/to internal format. A new internal format(`struct pixel_argb_u16`) is introduced to deal with all possible inputs. It consists of 16 bits fields that represent each of the channels. These things will allow us, in the future, to have different compositing and wb format types. V2: Change the code to get the drm_framebuffer reference and not copy its contents (Thomas Zimmermann). V3: Drop the refcount in the wb code (Thomas Zimmermann). V5: Add {wb,plane}_format_transform_func to vkms_writeback_job and vkms_plane_state (Pekka Paalanen) V6: Improvements to some struct/struct members names (Pekka Paalanen). Splits this patch in two (Pekka Paalanen). V7: Replace line_to_frame_func and frame_to_line_func typedefs with the function signature and void* (Melissa Wen). Reviewed-by: -
Igor Torrente authored
Instead of coping `drm_framebuffer` - which can cause problems - we just get the reference and add the ref count. Reviewed-by:
-
Igor Torrente authored
Add a helper function to validate the connector configuration received in the encoder atomic_check by the drivers. So the drivers don't need to do these common validations themselves. V2: Move the format verification to a new helper at the drm_atomic_helper.c (Thomas Zimmermann). V3: Format check improvements (Leandro Ribeiro). Minor improvements(Thomas Zimmermann). V5: Fix some grammar issues in the commit message (André Almeida). Reviewed-by: -
Igor Torrente authored
Changes the name of this struct to a more meaningful name. A name that represents better what this struct is about. Composer is the code that do the compositing of the planes. This struct contains information on the frame used in the output composition. Thus, vkms_frame_info is a better name to represent this. V5: Fix a commit message typo(Melissa Wen). V6: Fix wrong iosys_map_is_null verification at compose_plane (Melissa Wen). Reviewed-by: -
Igor Torrente authored
The `map` vector at `vkms_composer` uses a hardcoded value to define its size. If someday the maximum number of planes increases, this hardcoded value can be a problem. This value is being replaced with the DRM_FORMAT_MAX_PLANES macro. Acked-by:
-
Simon Ser authored
This can help figure out why the kernel returns EINVAL from user-space. v2: add missing newlines Signed-off-by:
Simon Ser <contact@emersion.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Simon Ser authored
Sometimes drivers are missing logs when they return EINVAL. Printing the failure here in common code can help understand where EINVAL is coming from. All other atomic_check() calls in this file already have similar logging. v2: add missing newlines Signed-off-by:
-
Simon Ser authored
When registering a connector, the kernel sends a hotplug uevent in drm_connector_register(). When unregistering a connector, drivers are expected to send a uevent as well. However, user-space has no way to figure out that the connector isn't registered anymore: it'll still be reported in GETCONNECTOR IOCTLs. The documentation for DRM_CONNECTOR_UNREGISTERED states: > The connector […] has since been unregistered and removed from > userspace, or the connector was unregistered before it had a chance > to be exposed to userspace Signed-off-by:
-
- 04 Sep, 2022 2 commits
-
-
Guillaume Ranquet authored
This patch adds audio support to the DP driver for MT8195 with up to 8 channels. Signed-off-by:
Guillaume Ranquet <granquet@baylibre.com> Signed-off-by:
Bo-Chen Chen <rex-bc.chen@mediatek.com> Tested-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-11-rex-bc.chen@mediatek.com
-
Jitao Shi authored
From the DP spec 1.4a chapter 3.3, upstream devices should implement HPD signal de-bouncing on an external connection. A period of 100ms should be used to detect an HPD connect event. To cover these cases, HPD de-bounce should be implemented only after HPD low has been detected for at least 100ms. Therefore, 1. If HPD is low (which means plugging out) for longer than 100ms: we need to do de-bouncing (which means we need to wait for 100ms). 2. If HPD low is for less than 100ms: we don't need to care about the de-bouncing. In this patch, we start a 100ms timer and use a need_debounce boolean to implement the feature. Two cases when HPD is high: 1. If the timer is expired (>100ms): - need_debounce is true. - When HPD high (plugging event comes), need_debounce will be true and then we need to do de-bouncing (wait for 100ms). 2. If the timer is not expired (<100ms): - need_debounce is false. - When HPD high (plugging event comes), need_debounce will be false and no need to do de-bouncing. HPD_______ __________________ | |<- 100ms -> |____________| <- 100ms -> Without HPD de-bouncing, USB-C to HDMI Adapaters will not be detected. The change has been successfully tested with the following devices: - Dell Adapter - USB-C to HDMI - Acer 1in1 HDMI dongle - Ugreen 1in1 HDMI dongle - innowatt HDMI + USB3 hub - Acer 2in1 HDMI dongle - Apple 3in1 HDMI dongle (A2119) - J5Create 3in1 HDMI dongle (JAC379) Tested-by:Jitao Shi <jitao.shi@mediatek.com> Signed-off-by:
CK Hu <ck.hu@mediatek.com> Signed-off-by:
-
