- 08 Dec, 2022 1 commit
-
-
Marek Vasut authored
The ASoC: dt-bindings: fsl-sai: Fix mx6ul and mx7d compatible strings dropped i.MX93 SAI compatible string, reinstate it. Fixes: 81b6c043 ("ASoC: dt-bindings: fsl-sai: Fix mx6ul and mx7d compatible strings") Signed-off-by:
Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20221208035354.255438-1-marex@denx.deSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 07 Dec, 2022 18 commits
-
-
Chancel Liu authored
DAIs parameters should be cleared if there's no active stream. Before, we implemented it in soc_pcm_hw_free() by detecting stream_active. If the running stream is the last active stream, we're going to clear parameters. However it will cause DAIs parameters never be cleared if there're more than one stream. For example, we have stream1 and stream2 about to stop. stream2 executes soc_pcm_hw_free() before stream1 executes soc_pcm_close(). At the moment, stream2 should clear DAIs parameters. Since stream_active is not yet updated by stream1 in soc_pcm_close(), stream2 will not clear DAIs parameters. In result both stream1 and stream2 don't clear the parameters. This patch moves DAIs parameters cleanup after stream_active is updated. Signed-off-by:
Chancel Liu <chancel.liu@nxp.com> Link: https://lore.kernel.org/r/20221128060950.3540845-1-chancel.liu@nxp.comSigned-off-by:
-
Jiapeng Chong authored
The function wcd_clsh_set_buck_mode() is defined in the wcd-clsh-v2.c file, but not called elsewhere, so remove this unused function. sound/soc/codecs/wcd-clsh-v2.c:133:20: warning: unused function 'wcd_clsh_enable_status'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3348Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20221205073507.36071-1-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: One new JasperLake configuration, core refactoring between RT1316 and RT1318 and a minor uninitialized variable corner case.
-
Mark Brown authored
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>: Even though skylake-driver is going to be replaced by the avs-driver, the goal is to keep it functional on all the configurations it supports until its EOL. When comparing chrome trees against upstream skylake-driver, couple fixes pop up that are not part of upstream repository. These fixes are backed up by real bugs (issue trackers), address real problems. There is no reason for them to stay in the internal tree. Patches 1-4 combined together address issue where the driver updates the presumably static audio format descriptions coming from the topology files through its "fixup" functions. As long as given audio format is used by a single path, nothing collides and any updates are harmless. However, when multiple paths e.g.: DMIC and HDMI1 utilize the same audio format descriptor, any updates caused by the opening of the first path, may cause the second to fail. The 5th change from the set fixes driver hang sporadically occurring during shutdown procedure. Once HDAudio links are powered down along with the AudioDSP, the hang stops reproducing. The last change helps survive in environments with limited/fragmented memory. While the BDL is small already, other buffers can be allocated using scatter-gather. This basically aligns the code with what the avs-driver does.
-
Wang Yufen authored
The node returned by of_parse_phandle() with refcount incremented, of_node_put() needs be called when finish using it. So add it in the error path in mt8183_mt6358_ts3a227_max98357_dev_probe(). Fixes: 11c02690 ("ASoC: Mediatek: MT8183: Add machine driver with TS3A227") Signed-off-by:
Wang Yufen <wangyufen@huawei.com> Link: https://lore.kernel.org/r/1670234188-23596-1-git-send-email-wangyufen@huawei.comSigned-off-by:
-
ye xingchen authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202212051943476482106@zte.com.cnSigned-off-by:
-
Wang Jingjin authored
The clk_disable_unprepare() should be called in the error handling of rockchip_pdm_runtime_resume(). Fixes: fc05a5b2 ("ASoC: rockchip: add support for pdm controller") Signed-off-by:
Wang Jingjin <wangjingjin1@huawei.com> Link: https://lore.kernel.org/r/20221205032802.2422983-1-wangjingjin1@huawei.comSigned-off-by:
-
Wang Yufen authored
The of_get_next_child() returns a node with refcount incremented, and decrements the refcount of prev. So in the error path of the while loop, of_node_put() needs be called for cpu_ep. Fixes: fce9b90c ("ASoC: audio-graph-card: cleanup DAI link loop method - step2") Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/1670228127-13835-1-git-send-email-wangyufen@huawei.comSigned-off-by:
-
Wang Yufen authored
The node returned by of_parse_phandle() with refcount incremented, of_node_put() needs be called when finish using it. So add it in the error path in mt8173_rt5650_rt5514_dev_probe(). Fixes: 0d1d7a66 ("ASoC: mediatek: Refine mt8173 driver and change config option") Signed-off-by:
-
Bard Liao authored
'ret' will not be initialized if dai_fmt is not DSP_A or DSP_B. Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20221206212507.359993-4-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Gongjun Song authored
sof_sdw_rt1308.c/sof_sdw_rt1316.c/sof_sdw_rt1318.c handle amp in basically the same way, optimized and merged into one file. Reviewed-by:
Gongjun Song <gongjun.song@intel.com> Signed-off-by:
-
Brent Lu authored
This configuration supports JSL boards which implement ALC5682I-VD/VS on SSP0 port. Reviewed-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
-
Cezary Rojewski authored
Resign from ->alloc_dma_buf() and use snd_dma_alloc_pages() directly. For data i.e.: base firmware binary transfer, make use of SG allocation to better adapt to memory-limited environment. For BDL descriptor, given its small size this is not required. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Tested-by:
Lukasz Majczak <lma@semihlaf.com> Link: https://lore.kernel.org/r/20221205085330.857665-7-cezary.rojewski@intel.comSigned-off-by:
-
Cezary Rojewski authored
AudioDSP cores and HDAudio links need to be turned off on shutdown to ensure no communication or data transfer occurs during the procedure. Fixes: c5a76a24 ("ASoC: Intel: Skylake: Add shutdown callback") Signed-off-by:
-
Cezary Rojewski authored
Provide a single location for pipe config selection where all fields that have to be updated whenever ->pipe_config_idx changes can be updated accordingly. Signed-off-by:
-
Cezary Rojewski authored
Field ->pipe_config_idx duplicates the job of ->cur_config_idx so remove it. Signed-off-by:
-
Cezary Rojewski authored
Rather than forcing userspace to select proper format with enumerable kcontrols, select it ourselves based on provided hw_params. Signed-off-by:
-
Cezary Rojewski authored
Without updating the index before BE copier config is filled with hardware parameters, outdated parameters are used instead. Signed-off-by:
-
- 05 Dec, 2022 21 commits
-
-
Mark Brown authored
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>: The patchset focuses on debug functionality for the avs-driver. Two major blocks are covered here: data probing and AudioDSP firmware logging. Both are configured and controlled through debugfs. Data probing is a AudioDSP debug functionality which allows for gathering the actual data that is being routed to or from a module. Helps in debugging its processing capabilities - navigate to a specific module which may have caused a glitch within a pipeline (set of modules bound together). First few allow for assigning compress stream to a HDAudio stream, what is currently limited to pcm substreams only. These patches were already present on this list and reviewed in the past [1]. The next few tidy existing debug-related code up so it's ready for addition of new functionalities and make it clear which part of the avs is debug related and which is not. These also simplify the existing locking around the trace fifo. Afterward, debug-related IPCs are defined along with stub soc-component and compress DAI operations. Not much is done there as it's not a standard PCM streaming scenario. Most code found in compress operations is inherited from the HOST side of HDAudio streaming found in pcm.c file of the driver. Finally, a debugfs file operations are defined. These facilitate connecting to DSP modules from which the data shall be gathered as well as control and configuration of firmware logging. Additionally, entries are added to allow for dumping snapshots of key memory windows.
-
Yang Yingliang authored
sof_es8336_remove() calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Fixes: 89cdb224 ("ASoC: sof_es8336: reduce pop noise on speaker") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
-
Mark Brown authored
Merge series from V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>: Fix an issue with starting the ACP DSP and support debug dumps to aid maintainability.
-
Krzysztof Kozlowski authored
Correct domain name in Alexandre Belloni's email address. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221203162144.99225-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Convert the Maxim Integrated MAX98504 amplifier bindings to DT schema. Few properties are made optional: 1. interrupts: current Linux driver implementation does not use them, 2. supplies: on some boards these might be wired to battery, for which no regulator is provided. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Maxim Integrated MAX98357A/MAX98360A amplifier bindings to DT schema. Add missing properties ('#sound-dai-cells' and 'sound-name-prefix' from common DAI properties). Signed-off-by: -
Krzysztof Kozlowski authored
Reference in all sound components which have '#sound-dai-cells' the dai-common.yaml schema, which allows to use 'sound-name-prefix' property. Signed-off-by:
Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Acked-by:
-
Krzysztof Kozlowski authored
Rename name-prefix.yaml into common DAI schema and document '#sound-dai-cells' for completeness. The '#sound-dai-cells' cannot be really constrained, as there are users with value of 0, 1 and 2, but at least it brings definition to one common place. Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only arrays capture_reg_H and capture_reg_L on the stack but instead make them static const. Also makes the object code a little smaller. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221202171450.1815346-1-colin.i.king@gmail.comSigned-off-by:
-
Colin Ian King authored
Don't populate the read-only arrays slotsel_2ch, slotsel_multi, v_pll and v_div on the stack but instead make them static const. Also makes the object code a little smaller. Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only array minCode_param on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by:
-
Srinivasa Rao Mandadapu authored
Add __maybe_unused tag for system PM ops suspend and resume. This is required to fix allmodconfig compilation issue. Fixes: a3a96e93 ("ASoC: qcom: lpass-sc7280: Add system suspend/resume PM ops") Signed-off-by:
Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Link: https://lore.kernel.org/r/1670219333-32526-1-git-send-email-quic_srivasam@quicinc.comSigned-off-by:
-
V sujith kumar Reddy authored
Add support for IPC and DSP dumps for AMD platforms. Signed-off-by:
V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com> Link: https://lore.kernel.org/r/20221205120649.1950576-3-Vsujithkumar.Reddy@amd.comSigned-off-by:
-
Ajye Huang authored
The Skyrim project and Whiterun met error when DSP loading during device boot. Ex, error in kernel log, ERR kernel: [ 16.124537] snd_sof_amd_rembrandt 0000:04:00.5: PSP validation failed. Use the snd_sof_dsp_read_poll_timeout function to successfully read the FW_QUALIFIER register Signed-off-by:
Ajye Huang <ajye_huang@compal.corp-partner.google.com> Signed-off-by:
-
Cezary Rojewski authored
Add new read-only debugfs entry which dumps entire content of the SRAM window 2 i.e.: the debug window. Signed-off-by:
-
Cezary Rojewski authored
SRAM0 window begins with a block of memory, usually of size PAGE_SIZE, dedicated to the base firmware registers. When debugging firmware, it is desirable to be able to dump them at will. Signed-off-by:
-
Cezary Rojewski authored
When user closes the tracer, some logs may still remain in the tail of the buffer as firmware sends LOG_BUFFER_STATUS notification only when certain threshold of data is reached. Add whatever is left to already gathered logs so no information is lost. Signed-off-by:
-
Cezary Rojewski authored
Define debugfs subdirectory delegated for IPC communication with DSP. Input format: uint,uint,(...) which are later translated into DWORDS sequence and further into instances of struct of interest given the IPC type. For Extractor probes, following have been enabled: - PROBE_POINT_ADD (echo <..> probe_points) - PROBE_POINT_REMOVE (echo <..> probe_points_remove) - PROBE_POINT_INFO (cat probe_points) Signed-off-by:
-
Cezary Rojewski authored
Stub machine board driver with no custom DAPM routes and single FE DAI link for userspace to interact with. Signed-off-by:
-
Cezary Rojewski authored
Define stub component for data probing. Stub as most operations from standard PCM case do not apply here. Specific bits are CPU DAIs and compress_ops. FE DAIs can link against these new CPU DAI to create new compress devices. Signed-off-by:
-
Cezary Rojewski authored
Add compress operations handlers for data extraction through probes. A single HDAudio stream is enlisted for said purpose. Operations follow same protocol as for standard PCM streaming on HOST side. Signed-off-by:
-
