- 26 Feb, 2019 1 commit
-
-
Mike Leach authored
The CoreSight specification (ARM IHI 0029E), updates the ID register requirements for components on an AMBA bus, to cover both traditional ARM Primecell type devices, and newer CoreSight and other components. The Peripheral ID (PID) / Component ID (CID) pair is extended in certain cases to uniquely identify components. CoreSight components related to a single function can share Peripheral ID values, and must be further identified using a Unique Component Identifier (UCI). e.g. the ETM, CTI, PMU and Debug hardware of the A35 all share the same PID. Bits 15:12 of the CID are defined to be the device class. Class 0xF remains for PrimeCell and legacy components. Class 0x9 defines the component as CoreSight (CORESIGHT_CID above) Class 0x0, 0x1, 0xB, 0xE define components that do not have driver support at present. Class 0x2-0x8,0xA and 0xD-0xD are presently reserved. The specification futher defines which classes of device use the standard CID/PID pair, and when additional ID registers are required. This patch introduces the amba_cs_uci_id structure which will be used in all coresight drivers for indentification via the private data pointer in the amba_id structure. Existing drivers that currently use the amba_id->data pointer for private data are updated to use the amba_cs_uci_id->data pointer. Macros and inline functions are added to simplify this code. Signed-off-by:
Mike Leach <mike.leach@linaro.org> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
- 12 Feb, 2019 1 commit
-
-
Nathan Chancellor authored
While building arm32 allyesconfig, I ran into the following errors: arch/arm/lib/xor-neon.c:17:2: error: You should compile this file with '-mfloat-abi=softfp -mfpu=neon' In file included from lib/raid6/neon1.c:27: /home/nathan/cbl/prebuilt/lib/clang/8.0.0/include/arm_neon.h:28:2: error: "NEON support not enabled" Building V=1 showed NEON_FLAGS getting passed along to Clang but __ARM_NEON__ was not getting defined. Ultimately, it boils down to Clang only defining __ARM_NEON__ when targeting armv7, rather than armv6k, which is the '-march' value for allyesconfig. >From lib/Basic/Targets/ARM.cpp in the Clang source: // This only gets set when Neon instructions are actually available, unlike // the VFP define, hence the soft float and arch check. This is subtly // different from gcc, we follow the intent which was that it should be set // when Neon instructions are actually available. if ((FPU & NeonFPU) && !SoftFloat && ArchVersion >= 7) { Builder.defineMacro("__ARM_NEON", "1"); Builder.defineMacro("__ARM_NEON__"); // current AArch32 NEON implementations do not support double-precision // floating-point even when it is present in VFP. Builder.defineMacro("__ARM_NEON_FP", "0x" + Twine::utohexstr(HW_FP & ~HW_FP_DP)); } Ard Biesheuvel recommended explicitly adding '-march=armv7-a' at the beginning of the NEON_FLAGS definitions so that __ARM_NEON__ always gets definined by Clang. This doesn't functionally change anything because that code will only run where NEON is supported, which is implicitly armv7. Link: https://github.com/ClangBuiltLinux/linux/issues/287Suggested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
- 01 Feb, 2019 15 commits
-
-
Russell King authored
machine_crash_nonpanic_core() does this: while (1) cpu_relax(); because the kernel has crashed, and we have no known safe way to deal with the CPU. So, we place the CPU into an infinite loop which we expect it to never exit - at least not until the system as a whole is reset by some method. In the absence of erratum 754327, this code assembles to: b . In other words, an infinite loop. When erratum 754327 is enabled, this becomes: 1: dmb b 1b It has been observed that on some systems (eg, OMAP4) where, if a crash is triggered, the system tries to kexec into the panic kernel, but fails after taking the secondary CPU down - placing it into one of these loops. This causes the system to livelock, and the most noticable effect is the system stops after issuing: Loading crashdump kernel... to the system console. The tested as working solution I came up with was to add wfe() to these infinite loops thusly: while (1) { cpu_relax(); wfe(); } which, without 754327 builds to: 1: wfe b 1b or with 754327 is enabled: 1: dmb wfe b 1b Adding "wfe" does two things depending on the environment we're running under: - where we're running on bare metal, and the processor implements "wfe", it stops us spinning endlessly in a loop where we're never going to do any useful work. - if we're running in a VM, it allows the CPU to be given back to the hypervisor and rescheduled for other purposes (maybe a different VM) rather than wasting CPU cycles inside a crashed VM. However, in light of erratum 794072, Will Deacon wanted to see 10 nops as well - which is reasonable to cover the case where we have erratum 754327 enabled _and_ we have a processor that doesn't implement the wfe hint. So, we now end up with: 1: wfe b 1b when erratum 754327 is disabled, or: 1: dmb nop nop nop nop nop nop nop nop nop nop wfe b 1b when erratum 754327 is enabled. We also get the dmb + 10 nop sequence elsewhere in the kernel, in terminating loops. This is reasonable - it means we get the workaround for erratum 794072 when erratum 754327 is enabled, but still relinquish the dead processor - either by placing it in a lower power mode when wfe is implemented as such or by returning it to the hypervisior, or in the case where wfe is a no-op, we use the workaround specified in erratum 794072 to avoid the problem. These as two entirely orthogonal problems - the 10 nops addresses erratum 794072, and the wfe is an optimisation that makes the system more efficient when crashed either in terms of power consumption or by allowing the host/other VMs to make use of the CPU. I don't see any reason not to use kexec() inside a VM - it has the potential to provide automated recovery from a failure of the VMs kernel with the opportunity for saving a crashdump of the failure. A panic() with a reboot timeout won't do that, and reading the libvirt documentation, setting on_reboot to "preserve" won't either (the documentation states "The preserve action for an on_reboot event is treated as a destroy".) Surely it has to be a good thing to avoiding having CPUs spinning inside a VM that is doing no useful work. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Vladimir Murzin authored
It looks like usage of CONFIG_FLASH_{MEM_BASE,SIZE} is limited with: arch/arm/mm/proc-arm740.S arch/arm/mm/proc-arm940.S arch/arm/mm/proc-arm946.S So it might look confusing to see the option for anything except these. Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Peng Hao authored
Remove unneeded semicolon. [vladimir] proper tags in subject line Signed-off-by:
Peng Hao <peng.hao2@zte.com.cn> Acked-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Vladimir Murzin authored
ARMv8M introduces support for Security extension to M class, among other things it affects exception handling, especially, encoding of EXC_RETURN. The new bits have been added: Bit [6] Secure or Non-secure stack Bit [5] Default callee register stacking Bit [0] Exception Secure which conflicts with hard-coded value of EXC_RETURN: In fact, we only care of few bits: Bit [3] Mode (0 - Handler, 1 - Thread) Bit [2] Stack pointer selection (0 - Main, 1 - Process) We can toggle only those bits and left other bits as they were on exception entry. It is basically, what patch does - saves EXC_RETURN when we do transition form Thread to Handler mode (it is first svc), so later saved value is used instead of EXC_RET_THREADMODE_PROCESSSTACK. Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Stefan Agner authored
Convert the conditional infix to a postfix to make sure this inline assembly is unified syntax. Since gcc assumes non-unified syntax when emitting ARM instructions, make sure to define the syntax as unified. This allows to use LLVM's integrated assembler. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Stefan Agner authored
Convert the conditional infix to a postfix to make sure this inline assembly is unified syntax. Since gcc assumes non-unified syntax when emitting ARM instructions, make sure to define the syntax as unified. This allows to use LLVM's integrated assembler. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Stefan Agner authored
The macro str8w takes 10 arguments, abort being the 10th. In this particular instantiation the abort argument is passed as 11th argument leading to an error when using LLVM's integrated assembler: <instantiation>:46:47: error: too many positional arguments str8w r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f ^ arch/arm/lib/copy_template.S:277:5: note: while in macro instantiation 18: forward_copy_shift pull=24 push=8 ^ The argument is not used in the macro hence this does not change code generation. Signed-off-by:
Stefan Agner <stefan@agner.ch> Reviewed-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Doug Berger authored
The max_low_pfn value must be set before sparse_init() is called to keep the early memblock allocations and frees balanced for kmemleak initialization when sparsemem is enabled. This commit accomplishes that by replacing the local variables min, max_low, and max_high with the global limit variables min_low_pfn, max_low_pfn, and max_pfn respectively in bootmem_init(). The global variables are initialized directly by find_limits() and used in the remainder of the function. Fixes: 9099daed ("mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mapping") Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
Doug Berger <opendmb@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Vincent Whitchurch authored
This is used when mmapping the PCI resource* files in sys. Because ARM currently lacks an implementation of pgprot_device(), it falls back to pgprot_uncached() (Strongly Ordered), but we should be able to use Device memory instead. Doing this speeds up large writes to the resource files by about 40% on one of my systems. It also ensures that mmaps on these resources use the same memory type as ioremap(). Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Geert Uytterhoeven authored
As of commit 7484c727 ("ARM: realview: delete the RealView board files"), the ARM Timer and Watchdog Unit is instantiated from DT only. Moreover, the driver is selected from ARCH_MULTIPLATFORM platforms only, which implies OF, TIMER_OF, and COMMON_CLK. Hence remove all unused legacy infrastructure from the driver. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Geert Uytterhoeven authored
According to the ARM Cortex-A5 and Cortex-A9 Technical Reference Manuals, SCU stands for "Snoop Control Unit". Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Geert Uytterhoeven authored
Since commit ad67b74d ("printk: hash addresses printed with %p"), the virtual memory layout printed during boot up contains "ptrval" instead of actual addresses: Memory: 501296K/524288K available (6144K kernel code, 528K rwdata, 1944K rodata, 1024K init, 7584K bss, 22992K reserved, 0K cma-reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (7136 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 529 kB) .bss : 0x(ptrval) - 0x(ptrval) (7585 kB) Instead of changing the printing to "%px", and leaking virtual memory layout information again, just remove the printing completely, cfr. e.g. commits 071929db ("arm64: Stop printing the virtual memory layout") and 31833332 ("m68k/mm: Stop printing the virtual memory layout"). All interesting information (actual section sizes) is already printed by mem_init_print_info() just above anyway. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Nathan Chancellor authored
This option is not supported by lld: ld.lld: error: unknown argument: -p This has been a no-op in binutils since 2004 (see commit dea514f51da1 in that tree). Given that the lowest officially supported of binutils for the kernel is 2.20, which was released in 2009, nobody needs this flag around so just remove it. Commit 1a381d4a ("arm64: remove no-op -p linker flag") did the same for arm64. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Nicolas Pitre <nico@linaro.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Wolfram Sang (Renesas) authored
Update the comment because we don't set the pointer to NULL anymore. Also use the correct pointer name 'dma_ops' instead of 'dma_map_ops'. Fixes: 1874619a ("ARM: dma-mapping: Set proper DMA ops in arm_iommu_detach_device()") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Ard Biesheuvel authored
Currently, init_static_idmap() installs some page table entries to cover the identity mapped part of the kernel image (which is only about 160 bytes in size in a multi_v7_defconfig Thumb2 build), and calls flush_cache_louis() to ensure that the updates are visible to the page table walker on the same core. When running under virtualization, flush_cache_louis() may take more than 10 seconds to complete: [ 0.108192] Setting up static identity map for 0x40300000 - 0x403000a0 [ 13.078127] rcu: Hierarchical SRCU implementation. This is due to the fact that set/way ops are not virtualizable, and so KVM may trap each one, resulting in a substantial delay. Since only LPAE capable CPUs may execute under virtualization, and considering that LPAE capable CPUs are guaranteed to have cache coherent page table walkers (per the architecture), let's only perform this cache maintenance on non-LPAE cores. Cc: Will Deacon <will.deacon@arm.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
- 07 Jan, 2019 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - improve boolinit.cocci and use_after_iter.cocci semantic patches - fix alignment for kallsyms - move 'asm goto' compiler test to Kconfig and clean up jump_label CONFIG option - generate asm-generic wrappers automatically if arch does not implement mandatory UAPI headers - remove redundant generic-y defines - misc cleanups * tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: rename generated .*conf-cfg to *conf-cfg kbuild: remove unnecessary stubs for archheader and archscripts kbuild: use assignment instead of define ... endef for filechk_* rules arch: remove redundant UAPI generic-y defines kbuild: generate asm-generic wrappers if mandatory headers are missing arch: remove stale comments "UAPI Header export list" riscv: remove redundant kernel-space generic-y kbuild: change filechk to surround the given command with { } kbuild: remove redundant target cleaning on failure kbuild: clean up rule_dtc_dt_yaml kbuild: remove UIMAGE_IN and UIMAGE_OUT jump_label: move 'asm goto' support test to Kconfig kallsyms: lower alignment on ARM scripts: coccinelle: boolinit: drop warnings on named constants scripts: coccinelle: check for redeclaration kconfig: remove unused "file" field of yylval union nds32: remove redundant kernel-space generic-y nios2: remove unneeded HAS_DMA define
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling updates form Ingo Molnar: "A final batch of perf tooling changes: mostly fixes and small improvements" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) perf session: Add comment for perf_session__register_idle_thread() perf thread-stack: Fix thread stack processing for the idle task perf thread-stack: Allocate an array of thread stacks perf thread-stack: Factor out thread_stack__init() perf thread-stack: Allow for a thread stack array perf thread-stack: Avoid direct reference to the thread's stack perf thread-stack: Tidy thread_stack__bottom() usage perf thread-stack: Simplify some code in thread_stack__process() tools gpio: Allow overriding CFLAGS tools power turbostat: Override CFLAGS assignments and add LDFLAGS to build command tools thermal tmon: Allow overriding CFLAGS assignments tools power x86_energy_perf_policy: Override CFLAGS assignments and add LDFLAGS to build command perf c2c: Increase the HITM ratio limit for displayed cachelines perf c2c: Change the default coalesce setup perf trace beauty ioctl: Beautify USBDEVFS_ commands perf trace beauty: Export function to get the files for a thread perf trace: Wire up ioctl's USBDEBFS_ cmd table generator perf beauty ioctl: Add generator for USBDEVFS_ ioctl commands tools headers uapi: Grab a copy of usbdevice_fs.h perf trace: Store the major number for a file when storing its pathname ...
-
- 06 Jan, 2019 20 commits
-
-
Linus Torvalds authored
The semantics of what "in core" means for the mincore() system call are somewhat unclear, but Linux has always (since 2.3.52, which is when mincore() was initially done) treated it as "page is available in page cache" rather than "page is mapped in the mapping". The problem with that traditional semantic is that it exposes a lot of system cache state that it really probably shouldn't, and that users shouldn't really even care about. So let's try to avoid that information leak by simply changing the semantics to be that mincore() counts actual mapped pages, not pages that might be cheaply mapped if they were faulted (note the "might be" part of the old semantics: being in the cache doesn't actually guarantee that you can access them without IO anyway, since things like network filesystems may have to revalidate the cache before use). In many ways the old semantics were somewhat insane even aside from the information leak issue. From the very beginning (and that beginning is a long time ago: 2.3.52 was released in March 2000, I think), the code had a comment saying Later we can get more picky about what "in core" means precisely. and this is that "later". Admittedly it is much later than is really comfortable. NOTE! This is a real semantic change, and it is for example known to change the output of "fincore", since that program literally does a mmmap without populating it, and then doing "mincore()" on that mapping that doesn't actually have any pages in it. I'm hoping that nobody actually has any workflow that cares, and the info leak is real. We may have to do something different if it turns out that people have valid reasons to want the old semantics, and if we can limit the information leak sanely. Cc: Kevin Easton <kevin@guarana.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Masatake YAMATO <yamato@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit 594cc251 ("make 'user_access_begin()' do 'access_ok()'") broke both alpha and SH booting in qemu, as noticed by Guenter Roeck. It turns out that the bug wasn't actually in that commit itself (which would have been surprising: it was mostly a no-op), but in how the addition of access_ok() to the strncpy_from_user() and strnlen_user() functions now triggered the case where those functions would test the access of the very last byte of the user address space. The string functions actually did that user range test before too, but they did it manually by just comparing against user_addr_max(). But with user_access_begin() doing the check (using "access_ok()"), it now exposed problems in the architecture implementations of that function. For example, on alpha, the access_ok() helper macro looked like this: #define __access_ok(addr, size) \ ((get_fs().seg & (addr | size | (addr+size))) == 0) and what it basically tests is of any of the high bits get set (the USER_DS masking value is 0xfffffc0000000000). And that's completely wrong for the "addr+size" check. Because it's off-by-one for the case where we check to the very end of the user address space, which is exactly what the strn*_user() functions do. Why? Because "addr+size" will be exactly the size of the address space, so trying to access the last byte of the user address space will fail the __access_ok() check, even though it shouldn't. As a result, the user string accessor functions failed consistently - because they literally don't know how long the string is going to be, and the max access is going to be that last byte of the user address space. Side note: that alpha macro is buggy for another reason too - it re-uses the arguments twice. And SH has another version of almost the exact same bug: #define __addr_ok(addr) \ ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) so far so good: yes, a user address must be below the limit. But then: #define __access_ok(addr, size) \ (__addr_ok((addr) + (size))) is wrong with the exact same off-by-one case: the case when "addr+size" is exactly _equal_ to the limit is actually perfectly fine (think "one byte access at the last address of the user address space") The SH version is actually seriously buggy in another way: it doesn't actually check for overflow, even though it did copy the _comment_ that talks about overflow. So it turns out that both SH and alpha actually have completely buggy implementations of access_ok(), but they happened to work in practice (although the SH overflow one is a serious serious security bug, not that anybody likely cares about SH security). This fixes the problems by using a similar macro on both alpha and SH. It isn't trying to be clever, the end address is based on this logic: unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b; which basically says "add start and length, and then subtract one unless the length was zero". We can't subtract one for a zero length, or we'd just hit an underflow instead. For a lot of access_ok() users the length is a constant, so this isn't actually as expensive as it initially looks. Reported-and-tested-by:
Guenter Roeck <linux@roeck-us.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscryptLinus Torvalds authored
Pull fscrypt updates from Ted Ts'o: "Add Adiantum support for fscrypt" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: add Adiantum support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bug fixes from Ted Ts'o: "Fix a number of ext4 bugs" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix special inode number checks in __ext4_iget() ext4: track writeback errors using the generic tracking infrastructure ext4: use ext4_write_inode() when fsyncing w/o a journal ext4: avoid kernel warning when writing the superblock to a dead device ext4: fix a potential fiemap/page fault deadlock w/ inline_data ext4: make sure enough credits are reserved for dioread_nolock writes
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions introduced in this cycles: - fix dma-debug tracking for the map_page / map_single consolidatation - properly stub out DMA mapping symbols for !HAS_DMA builds to avoid link failures - fix AMD Gart direct mappings - setup the dma address for no kernel mappings using the remap allocator" * tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING for remapped allocations x86/amd_gart: fix unmapping of non-GART mappings dma-mapping: remove a few unused exports dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMA dma-mapping: remove dmam_{declare,release}_coherent_memory dma-mapping: implement dmam_alloc_coherent using dmam_alloc_attrs dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs
-
Linus Torvalds authored
Merge tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - Changes for EC_MKBP_EVENT_SENSOR_FIFO handling. - Also, maintainership changes. Olofj out, Enric balletbo in. * tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: MAINTAINERS: add maintainers for ChromeOS EC sub-drivers MAINTAINERS: platform/chrome: Add Enric as a maintainer MAINTAINERS: platform/chrome: remove myself as maintainer platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup platform/chrome: straighten out cros_ec_get_{next,host}_event() error codes
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull hwspinlock updates from Bjorn Andersson: "This adds support for the hardware semaphores found in STM32MP1" * tag 'hwlock-v4.21' of git://github.com/andersson/remoteproc: hwspinlock: fix return value check in stm32_hwspinlock_probe() hwspinlock: add STM32 hwspinlock device dt-bindings: hwlock: Document STM32 hwspinlock bindings
-
Eric Biggers authored
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a tweakable, length-preserving encryption mode with security provably reducible to that of XChaCha12 and AES-256, subject to a security bound. It's also a true wide-block mode, unlike XTS. See the paper "Adiantum: length-preserving encryption for entry-level processors" (https://eprint.iacr.org/2018/720.pdf) for more details. Also see commit 059c2a4d ("crypto: adiantum - add Adiantum support"). On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and the NH hash function. These algorithms are fast even on processors without dedicated crypto instructions. Adiantum makes it feasible to enable storage encryption on low-end mobile devices that lack AES instructions; currently such devices are unencrypted. On ARM Cortex-A7, on 4096-byte messages Adiantum encryption is about 4 times faster than AES-256-XTS encryption; decryption is about 5 times faster. In fscrypt, Adiantum is suitable for encrypting both file contents and names. With filenames, it fixes a known weakness: when two filenames in a directory share a common prefix of >= 16 bytes, with CTS-CBC their encrypted filenames share a common prefix too, leaking information. Adiantum does not have this problem. Since Adiantum also accepts long tweaks (IVs), it's also safe to use the master key directly for Adiantum encryption rather than deriving per-file keys, provided that the per-file nonce is included in the IVs and the master key isn't used for any other encryption mode. This configuration saves memory and improves performance. A new fscrypt policy flag is added to allow users to opt-in to this configuration. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "A handful of late-arriving documentation fixes" * tag 'docs-5.0-fixes' of git://git.lwn.net/linux: doc: filesystems: fix bad references to nonexistent ext4.rst file Documentation/admin-guide: update URL of LKML information link Docs/kernel-api.rst: Remove blk-tag.c reference
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394Linus Torvalds authored
Pull firewire fixlet from Stefan Richter: "Remove an explicit dependency in Kconfig which is implied by another dependency" * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: Remove depends on HAS_DMA in case of platform dependency
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block updates and fixes from Jens Axboe: - Pulled in MD changes that Shaohua had queued up for 4.21. Unfortunately we lost Shaohua late 2018, I'm sending these in on his behalf. - In conjunction with the above, I added a CREDITS entry for Shaoua. - sunvdc queue restart fix (Ming) * tag 'for-linus-20190104' of git://git.kernel.dk/linux-block: Add CREDITS entry for Shaohua Li block: sunvdc: don't run hw queue synchronously from irq context md: fix raid10 hang issue caused by barrier raid10: refactor common wait code from regular read/write request md: remvoe redundant condition check lib/raid6: add option to skip algo benchmarking lib/raid6: sort algos in rough performance order lib/raid6: check for assembler SSSE3 support lib/raid6: avoid __attribute_const__ redefinition lib/raid6: add missing include for raid6test md: remove set but not used variable 'bi_rdev'
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Happy New Year, just decloaking from leave to get some stuff from the last week in before rc1: core: - two regression fixes for damage blob and atomic i915 gvt: - Some missed GVT fixes from the original pull amdgpu: - new PCI IDs - SR-IOV fixes - DC fixes - Vega20 fixes" * tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm: (53 commits) drm: Put damage blob when destroy plane state drm: fix null pointer dereference on null state pointer drm/amdgpu: Add new VegaM pci id drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output drm/amdgpu: add Vega20 PSP ASD firmware loading drm/amd/display: Fix MST dp_blank REG_WAIT timeout drm/amd/display: validate extended dongle caps drm/amd/display: Use div_u64 for flip timestamp ns to ms drm/amdgpu/uvd:Change uvd ring name convention drm/amd/powerplay: add Vega20 LCLK DPM level setting support drm/amdgpu: print process info when job timeout drm/amdgpu/nbio7.4: add hw bug workaround for vega20 drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12 drm/amd/display: Optimize passive update planes. drm/amd/display: verify lane status before exiting verify link cap drm/amd/display: Fix bug with not updating VSP infoframe drm/amd/display: Add retry to read ddc_clock pin drm/amd/display: Don't skip link training for empty dongle drm/amd/display: Wait edp HPD to high in detect_sink drm/amd/display: fix surface update sequence ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Over the break a few defects were found, so this is a -rc style pull request of various small things that have been posted. - An attempt to shorten RCU grace period driven delays showed crashes during heavier testing, and has been entirely reverted - A missed merge/rebase error between the advise_mr and ib_device_ops series - Some small static analysis driven fixes from Julia and Aditya - Missed ability to create a XRC_INI in the devx verbs interop series" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: infiniband/qedr: Potential null ptr dereference of qp infiniband: bnxt_re: qplib: Check the return value of send_message IB/ipoib: drop useless LIST_HEAD IB/core: Add advise_mr to the list of known ops Revert "IB/mlx5: Fix long EEH recover time with NVMe offloads" IB/mlx5: Allow XRC INI usage via verbs in DEVX context
-
git://github.com/bzolnier/linuxLinus Torvalds authored
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "This time the pull request is really small. The most notable changes are fixing fbcon to not cause crash on unregister_framebuffer() operation when there is more than one framebuffer, adding config option to center the bootup logo and making FB_BACKLIGHT config option tristate (which in turn uncovered incorrect FB_BACKLIGHT usage by DRM's nouveau driver). Summary: - fix fbcon to not cause crash on unregister_framebuffer() when there is more than one framebuffer (Noralf Trønnes) - improve support for small rotated displays (Peter Rosin) - fix probe failure handling in udlfb driver (Dan Carpenter) - add config option to center the bootup logo (Peter Rosin) - make FB_BACKLIGHT config option tristate (Rob Clark) - remove superfluous HAS_DMA dependency for goldfishfb driver (Geert Uytterhoeven) - misc fixes (Alexey Khoroshilov, YueHaibing, Colin Ian King, Lubomir Rintel) - misc cleanups (Yangtao Li, Wen Yang) also there is DRM's nouveau driver fix for wrong FB_BACKLIGHT config option usage (FB_BACKLIGHT is for internal fbdev subsystem use only)" * tag 'fbdev-v4.21' of git://github.com/bzolnier/linux: drm/nouveau: fix incorrect FB_BACKLIGHT usage in Kconfig fbdev: fbcon: Fix unregister crash when more than one framebuffer fbdev: Remove depends on HAS_DMA in case of platform dependency pxa168fb: trivial typo fix fbdev: fsl-diu: remove redundant null check on cmap fbdev: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE fbdev: uvesafb: fix spelling mistake "memoery" -> "memory" fbdev: fbmem: add config option to center the bootup logo fbdev: fbmem: make fb_show_logo_line return the end instead of the height video: fbdev: pxafb: Fix "WARNING: invalid free of devm_ allocated data" fbdev: fbmem: behave better with small rotated displays and many CPUs video: clps711x-fb: release disp device node in probe() fbdev: make FB_BACKLIGHT a tristate udlfb: fix some inconsistent NULL checking
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "I2C has only driver updates for you this time. Mostly new IDs/DT compatibles, also SPDX conversions, small cleanups. STM32F7 got FastMode+ and PM support, Axxia some reliabilty improvements" * 'i2c/for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (26 commits) i2c: Add Actions Semiconductor Owl family S700 I2C support dt-bindings: i2c: Add S700 support for Actions Semi Soc's i2c: ismt: Add support for Intel Cedar Fork i2c: tegra: Switch to SPDX identifier i2c: tegra: Add missing kerneldoc for some fields i2c: tegra: Cleanup kerneldoc comments i2c: axxia: support sequence command mode dt-bindings: i2c: rcar: Add r8a774c0 support dt-bindings: i2c: sh_mobile: Add r8a774c0 support i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E) i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier. i2c: powermac: Use of_node_name_eq for node name comparisons i2c-axxia: check for error conditions first i2c-axxia: dedicated function to set client addr dt-bindings: i2c: Use correct vendor prefix for Atmel i2c: tegra: replace spin_lock_irqsave with spin_lock in ISR eeprom: at24: add support for 24c2048 dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string i2c: i2c-stm32f7: add PM Runtime support i2c: sh_mobile: add support for r8a77990 (R-Car E3) ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - high-resolution scrolling support that gracefully handles differences between MS and Logitech implementations in HW, from Peter Hutterer and Harry Cutts - MSI IRQ support for intel-ish driver, from Song Hongyan - support for new hardware (Cougar 700K, Odys Winbook 13, ASUS FX503VD, ASUS T101HA) from Daniel M. Lambea, Hans de Goede and Aleix Roca Nonell - other small assorted fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (22 commits) HID: i2c-hid: Add Odys Winbook 13 to descriptor override HID: lenovo: Add checks to fix of_led_classdev_register HID: intel-ish-hid: add MSI interrupt support HID: debug: Change to use DEFINE_SHOW_ATTRIBUTE macro HID: doc: fix wrong data structure reference for UHID_OUTPUT HID: intel-ish-hid: fixes incorrect error handling HID: asus: Add support for the ASUS T101HA keyboard dock HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice HID: logitech: Enable high-resolution scrolling on Logitech mice HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration" HID: logitech-hidpp: fix typo, hiddpp to hidpp HID: input: use the Resolution Multiplier for high-resolution scrolling HID: core: process the Resolution Multiplier HID: core: store the collections as a basic tree Input: add `REL_WHEEL_HI_RES` and `REL_HWHEEL_HI_RES` HID: input: support Microsoft wireless radio control hotkey HID: use macros in IS_INPUT_APPLICATION HID: asus: Add support for the ASUS FX503VD laptop HID: asus: Add event handler to catch unmapped Asus Vendor UsagePage codes HID: cougar: Add support for Cougar 700K Gaming Keyboard ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatchingLinus Torvalds authored
Pull livepatch update from Jiri Kosina: "Return value checking fixup in livepatching samples, from Nicholas Mc Guire" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: check kzalloc return values
-
Masahiro Yamada authored
Remove the dot-prefixing since it is just a matter of the .gitignore file. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Make simply skips a missing rule when it is marked as .PHONY. Remove the dummy targets. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-