- 19 Sep, 2018 6 commits
-
-
Lee, Shawn C authored
The N value was computed by kernel driver that based on synchronous clock mode. But only specific N value (0x8000) would be acceptable for LG LP140WF6-SPM1 eDP panel which is running at asynchronous clock mode. With the other N value, Tcon will enter BITS mode and display black screen. Add this panel into quirk database and give particular N value when calculate M/N divider. v2: no update v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-4-git-send-email-shawn.c.lee@intel.com
-
Lee, Shawn C authored
Some DP dongles in particular seem to be fussy about too large link M/N values. Set specific value for N divider can resolve this issue per dongle vendor's comment. So configure N as constant value (0x8000) to instead of reduce M/N formula when specific DP dongle connected. v2: add more comments for issue description and fix typo. v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Tested-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
-
Lee, Shawn C authored
DP quirk list just compare sink or branch device's OUI so far. That means particular vendor's products will be applied specific change. This change would confirm device_id the same or not. Then driver can implement some changes for branch/sink device that really need additional WA. v2: use sizeof instead of hard coded '6' v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Tested-by:
-
Jiandi An authored
With virtio gpu ttm-pages being dma mapped, dma sync is needed when swiotlb is used as bounce buffers, before TRANSFER_TO_HOST_2D/3D commands are sent. Signed-off-by:
Jiandi An <jiandi.an@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180919070931.91168-1-jiandi.an@amd.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Icenowy Zheng authored
The R40 SoC has a HDMI PHY that is possible to mux two video PLLs. Add support for it. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180916043409.62374-4-icenowy@aosc.io
-
Icenowy Zheng authored
The Allwinner R40 HDMI PHY is currently the only one that seems to be able to select between two PLL inputs. Add a compatible string for it, and the pll-1 clock input definition. Signed-off-by:
-
- 14 Sep, 2018 2 commits
-
-
Chris Wilson authored
If the ioctl is not supported on a particular piece of HW/driver combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily distinguished from both the lack of the ioctl and from a regular invalid parameter. v2: Across all the kms ioctls we had a mixture of reporting EINVAL, ENODEV and a few ENOTSUPP (most where EINVAL) for a failed drm_core_check_feature(). Update everybody to report ENOTSUPP. v3: ENOTSUPP is an internal errno! It's value (524) does not correspond to a POSIX errno, the one we want is ENOTSUP. However, uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says "ENOTSUP and EOPNOTSUPP have the same value on Linux, but according to POSIX.1 these error values should be distinct." so use EOPNOTSUPP as its equivalent. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
-
Dan Carpenter authored
We accidentally forgot to set "ret" on this error path so it means we return NULL instead of an error pointer. The caller checks for NULL and changes it to an error pointer so it doesn't cause an issue at run time. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180914065615.GA12043@mwandaSigned-off-by:
-
- 13 Sep, 2018 5 commits
-
-
Ville Syrjälä authored
Disable atomic on a per-device basis instead of for all devices. Made possible by the new device.driver_features thing. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Suggested-by:
Michel Dänzer <michel@daenzer.net> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180913163147.27900-2-ville.syrjala@linux.intel.comReviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com>
-
Ville Syrjälä authored
Currently we're clearing DRIVER_ATOMIC in driver.driver_features for older platforms. This will not work correctly should we ever have a system with and old and new GPU in it. While that is not possible currently let's make the code more correct and use the per-device driver_features instead. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
We wish to control certain driver_features flags on a per-device basis while still sharing a single drm_driver instance across all the devices. To that end introduce device.driver_features. By default it will be set to ~0 to not impose any limits beyond driver.driver_features. Drivers can then clear specific flags in the per-device bitmask to limit the capabilities of the device. An alternative approach would be to copy the driver_features from the driver into the device in drm_dev_init(), however that would require verifying that no driver is currently changing driver.driver_features after drm_dev_init(). Hence the ~0 apporach was easier. Ideally we'd also make drm_driver const but there is plenty of code left that wants to mutate it (eg. various vfunc assignments). We'll need to fix all that up before we can make it const. And while at it fix up the type of the feature flag passed to drm_core_check_feature(). v2: Streamline the && vs. & (Chris) s/int/u32/ in drm_core_check_feature() args Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: -
Peter Rosin authored
Since commit 4a878c03 ("drm: bridge: Detach bridge from encoder at encoder cleanup time"), it is generally no longer correct to detach bridges from encoders manually. Document that. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180806061910.29914-3-peda@axentia.se
-
Marc Zyngier authored
The Analogix DP bridge driver is pretty verbose, and outputs things like [ 619.414067] rockchip-dp ff970000.edp: Link Training Clock Recovery success [ 619.429233] rockchip-dp ff970000.edp: Link Training success! each time the display gets unblanked. While it is good to know that the device is behaving correctly, users already know that because they can see some video output. Let's keep these messages for cases where we need to actually debug the driver (we have dynamic debug to enable them at runtime if need be), and let's keep the kernel quiet otherwise. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 12 Sep, 2018 14 commits
-
-
Maxime Ripard authored
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in a link error, as we try to access a symbol from the sun8i_tcon_top.ko module: ERROR: "sun8i_tcon_top_de_config" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined! ERROR: "sun8i_tcon_top_set_hdmi_src" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined! ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined! This solves the problem by adding a silent symbol for the tcon_top module, building it as a separate module in exactly the cases that we need it, but in a way that it is reachable by the other modules. Fixes: cf77d79b ("drm/sun4i: tcon: Add another way for matching mixers with tcon") Fixes: 0305189a ("drm/sun4i: tcon: Add support for R40 TCON") Reviewed-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Matt Hart <matthew.hart@linaro.org> Signed-off-by:
-
Peter Wu authored
Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by:
Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nlSigned-off-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Create variable for the list length limit. Serves as documentation, also allows to make it a module parameter if needed. Also add a total size limit. Signed-off-by:
-
Gerd Hoffmann authored
udmabuf builds without it, but if userspace can not create memfd handles in the first place it is rather pointless to include it, except for test builds. Signed-off-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
- 11 Sep, 2018 10 commits
-
-
Haneen Mohammed authored
Add an initial kerneldoc entry for vkms with a todo list. Signed-off-by:
Haneen Mohammed <hamohammed.sa@gmail.com> [danvet: Keep the todo.rst entry to point at the vkms docs instead.] Signed-off-by:
-
Haneen Mohammed authored
Cursor support is not complete yet. Add module option 'enable_cursor' to enable/disable cursor support which is used for testing currently. Signed-off-by:
-
Haneen Mohammed authored
This patch compute CRC for output frame with cursor and primary plane. Blend cursor with primary plane and compute CRC on the resulted frame. This currently passes cursor-size-change, and cursor-64x64-[onscreen, offscreen, sliding, random, dpms, rapid-movement] from igt kms_cursor_crc tests. Signed-off-by:
-
Haneen Mohammed authored
Add cursor plane support and update vkms_plane_atomic_check to enable positioning cursor plane. Signed-off-by:
-
Daniel Vetter authored
For buffer sharing, use dma-buf instead. We can't set smem_start to 0 unconditionally since that's used by the fbdev mmap default implementation. And we have plenty of userspace which would like to keep that working. This might break legit userspace - if it does we need to look at a case-by-cases basis how to handle that. Worst case I expect overrides for only specific drivers, since anything remotely modern should be using dma-buf/prime now (which is about 7 years old now for DRM drivers). This issue was uncovered because Noralf's rework to implement a generic fb_probe also implements it's own fb_mmap callback. Which means smem_start didn't have to be set anymore, which blew up some blob in userspace rather badly. Acked-by:
Sean Paul <seanpaul@chromium.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: John Stultz <john.stultz@linaro.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-4-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
DRM drivers really, really, really don't want random userspace to share buffer behind it's back, bypassing the dma-buf buffer sharing machanism. For that reason we've ruthlessly rejected any IOCTL exposing the physical address of any graphics buffer. Unfortunately fbdev comes with that built-in. We could just set smem_start to 0, but that means we'd have to hand-roll our own fb_mmap implementation. For good reasons many drivers do that, but smem_start/length is still super convenient. Hence instead just stop the leak in the ioctl, to keep fb mmap working as-is. A second patch will set this flag for all drm drivers. Acked-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kees Cook <keescook@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: linux-fbdev@vger.kernel.org Signed-off-by:
-
Daniel Vetter authored
It was only used by the panic support in fbcon, which is now gone. Remove this now dead code too. Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Joe Perches <joe@perches.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Meng Xu <mengxu.gatech@gmail.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: Mike Frysinger <vapier@chromium.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <treding@nvidia.com> Cc: David Lechner <david@lechnology.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by:
-
Daniel Vetter authored
This was only added for the drm's fbdev emulation support, so that it would try harder to show the Oops. Unfortunately this never really worked reliably, and in practice ended up pushing the real Oops off the screen due to plentyfull locking, sleep-while-atomic and other issues. So we removed all that support from the fbdev emulation a while back. Aside: We've also removed the kgdb support, for similar reasons. Since it's such a small patch I figured I don't split this up into the usual 3-phase removal. Acked-by:
-
Alexandru Gheorghe authored
DRM_MODE_REFLECT_X and DRM_MODE_REFLECT_Y meaning seems a bit unclear to me, so try to clarify that with a bit of ascii graphics. Changes since v1: - Move the ascii graphics in the kerneldoc where all plane properties are already documented and make sure it's properly rendered, suggestested by Daniel Vetter. Signed-off-by:Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Reviewed-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/drm_plane.c: In function 'drm_mode_getplane_res': drivers/gpu/drm/drm_plane.c:475:26: warning: variable 'config' set but not used [-Wunused-but-set-variable] Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- 10 Sep, 2018 3 commits
-
-
Marc Zyngier authored
Leaving the DRM driver enabled on reboot or kexec has the annoying effect of leaving the display generating transactions whilst the IOMMU has been shut down. In turn, the IOMMU driver (which shares its interrupt line with the VOP) starts warning either on shutdown or when entering the secondary kernel in the kexec case (nothing is expected on that front). A cheap way of ensuring that things are nicely shut down is to register a shutdown callback in the platform driver. Signed-off-by:
Vicente Bergas <vicencb@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180805124807.18169-1-marc.zyngier@arm.com Cc: stable@vger.kernel.org
-
Peter Wu authored
Clarify the relation between drm_fb_helper_fbdev_setup/teardown. Clarify requirements for the new generic fbdev emulation API and log some more details in case the driver does something wrong. Fix related typos. Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Peter Wu authored
The drm_get_pci_dev API is deprecated, replace it by drm_dev_register. Signed-off-by:
-
