Pull spi fixes from Mark Brown:
 "There's some driver specific fixes here plus one core fix for memory
  leaks that could be triggered by a potential race condition when
  cleaning up after we have split transfers to fit into what the
  controller can support"

* tag 'spi-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: stm32: fix pm_runtime_get_sync() error checking
  spi: Fix memory leak on splited transfers
  spi: spi-cadence-quadspi: Fix mapping of buffers for DMA reads
  spi: stm32: Rate-limit the 'Communication suspended' message
  spi: spi-loopback-test: Fix out-of-bounds read
  spi: spi-cadence-quadspi: Populate get_name() interface
  MAINTAINERS: add myself as maintainer for spi-fsl-dspi driver

Merge tag 'regulator-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "The biggest set of fixes here is those from Michał Mirosław fixing
  some locking issues with coupled regulators that are triggered in
  cases where a coupled regulator is used by a device involved in
  fs_reclaim like eMMC storage.

  These are relatively serious for the affected systems, though the
  circumstances where they trigger are very rare"

* tag 'regulator-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: pwm: Fix machine constraints application
  regulator: core: Fix slab-out-of-bounds in regulator_unlock_recursive()
  regulator: remove superfluous lock in regulator_resolve_coupling()
  regulator: cleanup regulator_ena_gpio_free()
  regulator: plug of_node leak in regulator_register()'s error path
  regulator: push allocation in set_consumer_device_supply() out of lock
  regulator: push allocations in create_regulator() outside of lock
  regulator: push allocation in regulator_ena_gpio_request() out of lock
  regulator: push allocation in regulator_init_coupling() outside of lock
  regulator: fix spelling mistake "Cant" -> "Can't"
  regulator: cros-ec-regulator: Add NULL test for devm_kmemdup call

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - sdio: Restore ~20% performance drop for SDHCI drivers, by using
     mmc_pre_req() and mmc_post_req() for SDIO requests.

  MMC host:
   - sdhci-of-esdhc: Fix support for erratum eSDHC7
   - mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset
   - sdhci-msm: Use retries to fix tuning
   - sdhci-acpi: Fix resume for eMMC HS400 mode"

* tag 'mmc-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdio: Use mmc_pre_req() / mmc_post_req()
  mmc: sdhci-of-esdhc: Don't walk device-tree on every interrupt
  mmc: mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset
  mmc: sdhci-msm: Add retries when all tuning phases are found valid
  mmc: sdhci-acpi: Clear amd_sdhci_host on reset

Pull drm fixes from Dave Airlie:
 "Regular fixes, not much a major amount. One thing though is Laurent
  fixed some Kconfig issues, and I'm carrying the rapidio kconfig change
  so the drm one for xlnx driver works. He hadn't got a response from
  rapidio maintainers.

  Otherwise, virtio, sun4i, tve200, ingenic have some fixes, one audio
  fix for i915 and a core docs fix.

  kconfig:
   - rapidio/xlnx kconfig fix

  core:
   - Documentation fix

  i915:
   - audio regression fix

  virtio:
   - Fix double free in virtio
   - Fix virtio unblank
   - Remove output->enabled from virtio, as it should use crtc_state

  sun4i:
   - Add missing put_device in sun4i, and other fixes
   - Handle sun4i alpha on lowest plane correctly

  tv200:
   - Fix tve200 enable/disable

  ingenic
   - Small ingenic fixes"

* tag 'drm-fixes-2020-09-11' of git://anongit.freedesktop.org/drm/drm:
  drm/i915: fix regression leading to display audio probe failure on GLK
  drm: xlnx: dpsub: Fix DMADEVICES Kconfig dependency
  rapidio: Replace 'select' DMAENGINES 'with depends on'
  drm/virtio: drop virtio_gpu_output->enabled
  drm/sun4i: backend: Disable alpha on the lowest plane on the A20
  drm/sun4i: backend: Support alpha property on lowest plane
  drm/sun4i: Fix DE2 YVU handling
  drm/tve200: Stabilize enable/disable
  dma-buf: fence-chain: Document missing dma_fence_chain_init() parameter in kerneldoc
  dma-buf: Fix kerneldoc of dma_buf_set_name()
  drm/virtio: fix unblank
  Documentation: fix dma-buf.rst underline length warning
  drm/sun4i: Fix dsi dcs long write function
  drm/ingenic: Fix driver not probing when IPU port is missing
  drm/ingenic: Fix leak of device_node pointer
  drm/sun4i: add missing put_device() call in sun8i_r40_tcon_tv_set_mux()
  drm/virtio: Revert "drm/virtio: Call the right shmem helpers"

Pull rdma fixes from Jason Gunthorpe:
 "A number of driver bug fixes and a few recent regressions:

   - Several bug fixes for bnxt_re. Crashing, incorrect data reported,
     and corruption on new HW

   - Memory leak and crash in rxe

   - Fix sysfs corruption in rxe if the netdev name is too long

   - Fix a crash on error unwind in the new cq_pool code

   - Fix kobject panics in rtrs by working device lifetime properly

   - Fix a data corruption bug in iser target related to misaligned
     buffers"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/isert: Fix unaligned immediate-data handling
  RDMA/rtrs-srv: Set .release function for rtrs srv device during device init
  RDMA/bnxt_re: Remove set but not used variable 'qplib_ctx'
  RDMA/core: Fix reported speed and width
  RDMA/core: Fix unsafe linked list traversal after failing to allocate CQ
  RDMA/bnxt_re: Remove the qp from list only if the qp destroy succeeds
  RDMA/bnxt_re: Fix driver crash on unaligned PSN entry address
  RDMA/bnxt_re: Restrict the max_gids to 256
  RDMA/bnxt_re: Static NQ depth allocation
  RDMA/bnxt_re: Fix the qp table indexing
  RDMA/bnxt_re: Do not report transparent vlan from QP1
  RDMA/mlx4: Read pkey table length instead of hardcoded value
  RDMA/rxe: Fix panic when calling kmem_cache_create()
  RDMA/rxe: Fix memleak in rxe_mem_init_user
  RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars
  RDMA/rtrs-srv: Replace device_register with device_initialize and device_add

Using gcov to collect coverage data for kernels compiled with GCC 10.1
causes random malfunctions and kernel crashes.  This is the result of a
changed GCOV_COUNTERS value in GCC 10.1 that causes a mismatch between
the layout of the gcov_info structure created by GCC profiling code and
the related structure used by the kernel.

Fix this by updating the in-kernel GCOV_COUNTERS value.  Also re-enable
config GCOV_KERNEL for use with GCC 10.
Reported-by: Colin Ian King <colin.king@canonical.com>
Reported-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Tested-and-Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm-misc-fixes for v5.9-rc5:
- Fix double free in virtio.
- Add missing put_device in sun4i, and other fixes.
- Small ingenic fixes.
- Handle sun4i alpha on lowest plane correctly.
- Remove output->enabled from virtio, as it should use crtc_state.
- Fix tve200 enable/disable.
- Documentation fix.
- Fix virtio unblank.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/478b49d1-b1b3-c983-7056-8a89249be435@mblankhorst.nl

Merge tag 'drm-intel-fixes-2020-09-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.9-rc5:
- Fix regression leading to audio probe failure
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/875z8m2hss.fsf@intel.com

Pull f2fs fixes from Jaegeuk Kim:
 "Small bug fixes for:

   - SMR drive fix

   - infinite loop when building free node ids

   - EOF at DIO read"

* tag 'f2fs-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: Return EOF on unaligned end of file DIO read
  f2fs: fix indefinite loop scanning for free nid
  f2fs: Fix type of section block count variables

Pull crypto fix from Herbert Xu:
 "This fixes a regression in padata"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  padata: fix possible padata_works_lock deadlock

Pull NFS client bugfixes from Trond Myklebust:

 - Fix an NFS/RDMA resource leak

 - Fix the error handling during delegation recall

 - NFSv4.0 needs to return the delegation on a zero-stateid SETATTR

 - Stop printk reading past end of string

* tag 'nfs-for-5.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: stop printk reading past end of string
  NFS: Zero-stateid SETATTR should first return delegation
  NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall
  xprtrdma: Release in-flight MRs on disconnect

Currently we allocate rx buffers in a single contiguous buffers for
headers (iser and iscsi) and data trailer. This means that most likely the
data starting offset is aligned to 76 bytes (size of both headers).

This worked fine for years, but at some point this broke, resulting in
data corruptions in isert when a command comes with immediate data and the
underlying backend device assumes 512 bytes buffer alignment.

We assume a hard-requirement for all direct I/O buffers to be 512 bytes
aligned. To fix this, we should avoid passing unaligned buffers for I/O.

Instead, we allocate our recv buffers with some extra space such that we
can have the data portion align to 512 byte boundary. This also means that
we cannot reference headers or data using structure but rather
accessors (as they may move based on alignment). Also, get rid of the
wrong __packed annotation from iser_rx_desc as this has only harmful
effects (not aligned to anything).

This affects the rx descriptors for iscsi login and data plane.

Fixes: 3d75ca0a ("block: introduce multi-page bvec helpers")
Link: https://lore.kernel.org/r/20200904195039.31687-1-sagi@grimberg.meReported-by: Stephen Rust <srust@blockbridge.com>
Tested-by: Doug Dumitru <doug@dumitru.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The device .release function was not being set during the device
initialization. This was leading to the below warning, in error cases when
put_srv was called before device_add was called.

Warning:

Device '(null)' does not have a release() function, it is broken and must
be fixed. See Documentation/kobject.txt.

So, set the device .release function during device initialization in the
__alloc_srv() function.

Fixes: baa5b28b ("RDMA/rtrs-srv: Replace device_register with device_initialize and device_add")
Link: https://lore.kernel.org/r/20200907102216.104041-1-haris.iqbal@cloud.ionos.comSigned-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

drivers/infiniband/hw/bnxt_re/main.c:1012:25:
 warning: variable ‘qplib_ctx’ set but not used [-Wunused-but-set-variable]

Fixes: f86b31c6 ("RDMA/bnxt_re: Static NQ depth allocation")
Link: https://lore.kernel.org/r/20200905121624.32776-1-yuehaibing@huawei.comSigned-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The pm_runtime_get_sync() can return either 0 or 1 on success but this
code treats 1 as a failure.

Fixes: db96bf97 ("spi: stm32: fixes suspend/resume management")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/20200909094304.GA420136@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

In the prepare_message callback the bus driver has the
opportunity to split a transfer into smaller chunks.
spi_map_msg is done after prepare_message.

Function spi_res_release releases the splited transfers
in the message. Therefore spi_res_release should be called
after spi_map_msg.

The previous try at this was commit c9ba7a16
which released the splited transfers after
spi_finalize_current_message had been called.
This introduced a race since the message struct could be
out of scope because the spi_sync call got completed.

Fixes this leak on spi bus driver spi-bcm2835.c when transfer
size is greater than 65532:

Kmemleak:
sg_alloc_table+0x28/0xc8
spi_map_buf+0xa4/0x300
__spi_pump_messages+0x370/0x748
__spi_sync+0x1d4/0x270
spi_sync+0x34/0x58
spi_test_execute_msg+0x60/0x340 [spi_loopback_test]
spi_test_run_iter+0x548/0x578 [spi_loopback_test]
spi_test_run_test+0x94/0x140 [spi_loopback_test]
spi_test_run_tests+0x150/0x180 [spi_loopback_test]
spi_loopback_test_probe+0x50/0xd0 [spi_loopback_test]
spi_drv_probe+0x84/0xe0
Signed-off-by: Gustav Wiklander <gustavwi@axis.com>
Link: https://lore.kernel.org/r/20200908151129.15915-1-gustav.wiklander@axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

Reading past end of file returns EOF for aligned reads but -EINVAL for
unaligned reads on f2fs.  While documentation is not strict about this
corner case, most filesystem returns EOF on this case, like iomap
filesystems.  This patch consolidates the behavior for f2fs, by making
it return EOF(0).

it can be verified by a read loop on a file that does a partial read
before EOF (A file that doesn't end at an aligned address).  The
following code fails on an unaligned file on f2fs, but not on
btrfs, ext4, and xfs.

  while (done < total) {
    ssize_t delta = pread(fd, buf + done, total - done, off + done);
    if (!delta)
      break;
    ...
  }

It is arguable whether filesystems should actually return EOF or
-EINVAL, but since iomap filesystems support it, and so does the
original DIO code, it seems reasonable to consolidate on that.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

If the sbi->ckpt->next_free_nid is not NAT block aligned and if there
are free nids in that NAT block between the start of the block and
next_free_nid, then those free nids will not be scanned in scan_nat_page().
This results into mismatch between nm_i->available_nids and the sum of
nm_i->free_nid_count of all NAT blocks scanned. And nm_i->available_nids
will always be greater than the sum of free nids in all the blocks.
Under this condition, if we use all the currently scanned free nids,
then it will loop forever in f2fs_alloc_nid() as nm_i->available_nids
is still not zero but nm_i->free_nid_count of that partially scanned
NAT block is zero.

Fix this to align the nm_i->next_scan_nid to the first nid of the
corresponding NAT block.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Commit da52f8ad ("f2fs: get the right gc victim section when section
has several segments") added code to count blocks of each section using
variables with type 'unsigned short', which has 2 bytes size in many
systems. However, the counts can be larger than the 2 bytes range and
type conversion results in wrong values. Especially when the f2fs
sections have blocks as many as USHRT_MAX + 1, the count is handled as 0.
This triggers eternal loop in init_dirty_segmap() at mount system call.
Fix this by changing the type of the variables to block_t.

Fixes: da52f8ad ("f2fs: get the right gc victim section when section has several segments")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Kconfig fixes for DRM_ZYNQMP_DPSUB DMA engine dependency
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200905172751.GC6319@pendragon.ideasonboard.com

Merge tag 'linux-kselftest-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:
 "A single fix to timers test to disable timeout setting for tests to
  run and report accurate results"

* tag 'linux-kselftest-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/timers: Turn off timeout setting

Pull SCSI fixes from James Bottomley:
 "Eleven fixes, mostly in drivers or minor fixes in driver related
  infrastructure libraries (target, libfc and libsas).

  Most of the bugs fixed only show up under rare circumstances, the
  exception being the endianness problem in qla2xxx which is used as a
  device on some sparc systems"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpt3sas: Don't call disable_irq from IRQ poll handler
  scsi: megaraid_sas: Don't call disable_irq from process IRQ poll
  scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem
  scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA
  scsi: target: iscsi: Fix data digest calculation
  scsi: lpfc: Update lpfc version to 12.8.0.4
  scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional events
  scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery
  scsi: lpfc: Fix setting IRQ affinity with an empty CPU mask
  scsi: qla2xxx: Fix regression on sparc64
  scsi: libfc: Fix for double free()
  scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort

Pull drm fixes from Dave Airlie:
 "The i915 reverts are going to be a bit of a conflict mess for next, so
  I decided to dequeue them now, along with some msm fixes for a ring
  corruption issue, that Rob sent over the weekend.

  Summary:

  i915:
   - revert gpu relocation changes due to regression

  msm:
  - fixes for RPTR corruption issue"

* tag 'drm-fixes-2020-09-08' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/i915/gem: Delete unused code"
  Revert "drm/i915/gem: Async GPU relocations only"
  Revert "drm/i915: Remove i915_gem_object_get_dirty_page()"
  drm/msm: Disable the RPTR shadow
  drm/msm: Disable preemption on all 5xx targets
  drm/msm: Enable expanded apriv support for a650
  drm/msm: Split the a5xx preemption record

Merge tag 'livepatching-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching fix from Petr Mladek:
 "Workaround for 'unreachable instruction' objtool warnings that happen
  with some compiler versions"

* tag 'livepatching-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  Revert "kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled"

Buffers need to mapped to DMA channel's device pointer instead of SPI
controller's device pointer as its system DMA that actually does data
transfer.
Data inconsistencies have been reported when reading from flash
without this fix.

Fixes: ffa639e0 ("mtd: spi-nor: cadence-quadspi: Add DMA support for direct mode reads")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/20200831130720.4524-1-vigneshr@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

In commit 4f0b4352 ("drm/i915: Extract cdclk requirements checking
to separate function") the order of force_min_cdclk_changed check and
intel_modeset_checks(), was reversed. This broke the mechanism to
immediately force a new CDCLK minimum, and lead to driver probe
errors for display audio on GLK platform with 5.9-rc1 kernel. Fix
the issue by moving intel_modeset_checks() call later.

[vsyrjala: It also broke the ability of planes to bump up the cdclk
and thus could lead to underruns when eg. flipping from 32bpp to
64bpp framebuffer. To be clear, we still compute the new cdclk
correctly but fail to actually program it to the hardware due to
intel_set_cdclk_{pre,post}_plane_update() not getting called on
account of state->modeset==false.]

Fixes: 4f0b4352 ("drm/i915: Extract cdclk requirements checking to separate function")
BugLink: https://github.com/thesofproject/linux/issues/2410Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200901151036.1312357-1-kai.vehmanen@linux.intel.com
(cherry picked from commit cf696856)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

These commits caused a regression on Lenovo t520 sandybridge
machine belonging to reporter. We are reverting them for 5.10
for other reasons, so just do it for 5.9 as well.

This reverts commit 7ac2d253.
Reported-by: Harald Arnesen <harald@skogtun.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

These commits caused a regression on Lenovo t520 sandybridge
machine belonging to reporter. We are reverting them for 5.10
for other reasons, so just do it for 5.9 as well.

This reverts commit 9e0f9464.
Reported-by: Harald Arnesen <harald@skogtun.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

These commits caused a regression on Lenovo t520 sandybridge
machine belonging to reporter. We are reverting them for 5.10
for other reasons, so just do it for 5.9 as well.

This reverts commit 763fedd6.
Reported-by: Harald Arnesen <harald@skogtun.org>
Signed-off-by: Dave Airlie <airied@redhat.com>

A few fixes for a potential RPTR corruption issue.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGvnr6Nhz2J0sjv2G+j7iceVtaDiJDT8T88uW6jiBfOGKQ@mail.gmail.com

The 'spi_stm32 44004000.spi: Communication suspended' message means that
when using PIO, the kernel did not read the FIFO fast enough and so the
SPI controller paused the transfer. Currently, this is printed on every
single such event, so if the kernel is busy and the controller is pausing
the transfers often, the kernel will be all the more busy scrolling this
message into the log buffer every few milliseconds. That is not helpful.

Instead, rate-limit the message and print it every once in a while. It is
not possible to use the default dev_warn_ratelimited(), because that is
still too verbose, as it prints 10 lines (DEFAULT_RATELIMIT_BURST) every
5 seconds (DEFAULT_RATELIMIT_INTERVAL). The policy here is to print 1 line
every 50 seconds (DEFAULT_RATELIMIT_INTERVAL * 10), because 1 line is more
than enough and the cycles saved on printing are better left to the CPU to
handle the SPI. However, dev_warn_once() is also not useful, as the user
should be aware that this condition is possibly recurring or ongoing. Thus
the custom rate-limit policy.

Finally, turn the message from dev_warn() to dev_dbg(), since the system
does not suffer any sort of malfunction if this message appears, it is
just slowing down. This further reduces the printing into the log buffer
and frees the CPU to do useful work.

Fixes: dcbe0d84 ("spi: add driver for STM32 SPI controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Antonio Borneo <borneo.antonio@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200905151913.117775-1-marex@denx.deSigned-off-by: Mark Brown <broonie@kernel.org>

SDHCI changed from using a tasklet to finish requests, to using an IRQ
thread i.e. commit c07a48c2 ("mmc: sdhci: Remove finish_tasklet").
Because this increased the latency to complete requests, a preparatory
change was made to complete the request from the IRQ handler if
possible i.e. commit 19d2f695 ("mmc: sdhci: Call mmc_request_done()
from IRQ handler if possible").  That alleviated the situation for MMC
block devices because the MMC block driver makes use of mmc_pre_req()
and mmc_post_req() so that successful requests are completed in the IRQ
handler and any DMA unmapping is handled separately in mmc_post_req().
However SDIO was still affected, and an example has been reported with
up to 20% degradation in performance.

Looking at SDIO I/O helper functions, sdio_io_rw_ext_helper() appeared
to be a possible candidate for making use of asynchronous requests
within its I/O loops, but analysis revealed that these loops almost
never iterate more than once, so the complexity of the change would not
be warrented.

Instead, mmc_pre_req() and mmc_post_req() are added before and after I/O
submission (mmc_wait_for_req) in mmc_io_rw_extended().  This still has
the potential benefit of reducing the duration of interrupt handlers, as
well as addressing the latency issue for SDHCI.  It also seems a more
reasonable solution than forcing drivers to do everything in the IRQ
handler.
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: c07a48c2 ("mmc: sdhci: Remove finish_tasklet")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200903082007.18715-1-adrian.hunter@intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Commit b214fe59 ("mmc: sdhci-of-esdhc: add erratum eSDHC7 support")
added code to check for a specific compatible string in the device-tree
on every esdhc interrupat. Instead of doing this record the quirk in
struct sdhci_esdhc and lookup the struct in esdhc_irq.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20200903012029.25673-1-chris.packham@alliedtelesis.co.nz
Fixes: b214fe59 ("mmc: sdhci-of-esdhc: add erratum eSDHC7 support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The commit cd57d07b ("sh: don't allow non-coherent DMA for NOMMU") made
CONFIG_NO_DMA to be set for some platforms, for good reasons.
Consequentially, CONFIG_HAS_DMA doesn't get set, which makes the DMA
mapping interface to be built as stub functions, but also prevent the
mmc_spi driver from being built as it depends on CONFIG_HAS_DMA.

It turns out that for some odd cases, the driver still relied on the DMA
mapping interface, even if the DMA was not actively being used.

To fixup the behaviour, let's drop the build dependency for CONFIG_HAS_DMA.
Moreover, as to allow the driver to succeed probing, let's move the DMA
initializations behind "#ifdef CONFIG_HAS_DMA".

Fixes: cd57d07b ("sh: don't allow non-coherent DMA for NOMMU")
Reported-by: Rich Felker <dalias@libc.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20200901150438.228887-1-ulf.hansson@linaro.org

As the comments in this patch say, if we tune and find all phases are
valid it's _almost_ as bad as no phases being found valid.  Probably
all phases are not really reliable but we didn't detect where the
unreliable place is.  That means we'll essentially be guessing and
hoping we get a good phase.

This is not just a problem in theory.  It was causing real problems on
a real board.  On that board, most often phase 10 is found as the only
invalid phase, though sometimes 10 and 11 are invalid and sometimes
just 11.  Some percentage of the time, however, all phases are found
to be valid.  When this happens, the current logic will decide to use
phase 11.  Since phase 11 is sometimes found to be invalid, this is a
bad choice.  Sure enough, when phase 11 is picked we often get mmc
errors later in boot.

I have seen cases where all phases were found to be valid 3 times in a
row, so increase the retry count to 10 just to be extra sure.

Fixes: 415b5a75 ("mmc: sdhci-msm: Add platform_execute_tuning implementation")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200827075809.1.If179abf5ecb67c963494db79c3bc4247d987419b@changeidSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The commit 61d7437e ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040")
broke resume for eMMC HS400. When the system suspends the eMMC controller
is powered down. So, on resume we need to reinitialize the controller.
Although, amd_sdhci_host was not getting cleared, so the DLL was never
re-enabled on resume. This results in HS400 being non-functional.

To fix the problem, this change clears the tuned_clock flag, clears the
dll_enabled flag and disables the DLL on reset.

Fixes: 61d7437e ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200831150517.1.I93c78bfc6575771bb653c9d3fca5eb018a08417d@changeidSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Pull more io_uring fixes from Jens Axboe:
 "Two followup fixes. One is fixing a regression from this merge window,
  the other is two commits fixing cancelation of deferred requests.

  Both have gone through full testing, and both spawned a few new
  regression test additions to liburing.

   - Don't play games with const, properly store the output iovec and
     assign it as needed.

   - Deferred request cancelation fix (Pavel)"

* tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-block:
  io_uring: fix linked deferred ->files cancellation
  io_uring: fix cancel of deferred reqs with ->files
  io_uring: fix explicit async read/write mapping for large segments

Pull iommu fixes from Joerg Roedel:

 - three Intel VT-d fixes to fix address handling on 32bit, fix a NULL
   pointer dereference bug and serialize a hardware register access as
   required by the VT-d spec.

 - two patches for AMD IOMMU to force AMD GPUs into translation mode
   when memory encryption is active and disallow using IOMMUv2
   functionality.  This makes the AMDGPU driver work when memory
   encryption is active.

 - two more fixes for AMD IOMMU to fix updating the Interrupt Remapping
   Table Entries.

 - MAINTAINERS file update for the Qualcom IOMMU driver.

* tag 'iommu-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Handle 36bit addressing for x86-32
  iommu/amd: Do not use IOMMUv2 functionality when SME is active
  iommu/amd: Do not force direct mapping when SME is active
  iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE
  iommu/amd: Restore IRTE.RemapEn bit after programming IRTE
  iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set()
  iommu/vt-d: Serialize IOMMU GCMD register modifications
  MAINTAINERS: Update QUALCOMM IOMMU after Arm SMMU drivers move

Pull x86 fixes from Ingo Molnar:

 - more generic entry code ABI fallout

 - debug register handling bugfixes

 - fix vmalloc mappings on 32-bit kernels

 - kprobes instrumentation output fix on 32-bit kernels

 - fix over-eager WARN_ON_ONCE() on !SMAP hardware

 - NUMA debugging fix

 - fix Clang related crash on !RETPOLINE kernels

* tag 'x86-urgent-2020-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry: Unbreak 32bit fast syscall
  x86/debug: Allow a single level of #DB recursion
  x86/entry: Fix AC assertion
  tracing/kprobes, x86/ptrace: Fix regs argument order for i386
  x86, fakenuma: Fix invalid starting node ID
  x86/mm/32: Bring back vmalloc faulting on x86_32
  x86/cmdline: Disable jump tables for cmdline.c