There's up to 4 versions of SPE now. Let's add the version that's been
detected to the driver's informational print out.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230206204746.1452942-1-robh@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

Arm SPEv1.2 (Arm v8.7/v9.2) adds a new feature called Inverted Event
Filter which excludes samples matching the event filter. The feature
mirrors the existing event filter in PMSEVFR_EL1 adding a new register,
PMSNEVFR_EL1, which has the same event bit assignments.
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-8-327f860daf28@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

Arm SPEv1.2 adds another 64-bits of event filtering control. As the
existing perf_event_attr::configN fields are all used up for SPE PMU, an
additional field is needed. Add a new 'config3' field.
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-7-327f860daf28@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

active_events is set but not used, remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230203121509.3580245-1-s.hauer@pengutronix.deSigned-off-by: Will Deacon <will@kernel.org>

Arm SPEv1.2 (Armv8.7/v9.2) adds a new event, 'not taken', in bit 6 of
the PMSEVFR_EL1 register. Update arm_spe_pmsevfr_res0() to support the
additional event.
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-6-327f860daf28@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

Now that the SPE register definitions include enums for some PMSIDR_EL1
fields, use them in the driver in place of magic values.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-5-327f860daf28@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

Now that generated sysregs are in place, update the register field
accesses. The use of BIT() is no longer needed with the new defines. Use
FIELD_GET and FIELD_PREP instead of open coding masking and shifting.

No functional change.
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-4-327f860daf28@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

Convert all the SPE register defines to automatic generation. No
functional changes.

New registers and fields for SPEv1.2 are added with the conversion.

Some of the PMBSR MSS field defines are kept as the automatic generation
has no way to create multiple names for the same register bits. The
meaning of the MSS field depends on other bits.
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-3-327f860daf28@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

We currently have a non-standard SYS_ prefix in the constants generated
for the SPE register bitfields. Drop this in preparation for automatic
register definition generation.

The SPE mask defines were unshifted, and the SPE register field
enumerations were shifted. The autogenerated defines are the opposite,
so make the necessary adjustments.

No functional changes.
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-2-327f860daf28@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

Similar to commit 121a8fc0 ("arm64/sysreg: Use feature numbering for
PMU and SPE revisions") use feature numbering instead of architecture
versions for the PMSEVFR_EL1 Res0 defines.
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-1-327f860daf28@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

Add support for ACPI based device registration so that the driver
can be also enabled through ACPI table.
While at that change the DT specific API's to device_* API's so that
both DT based and ACPI based probing works.
Signed-off-by: Gowthami Thiagarajan <gthiagarajan@marvell.com>
Link: https://lore.kernel.org/r/20221209053715.3930071-1-gthiagarajan@marvell.comSigned-off-by: Will Deacon <will@kernel.org>

Add support for ACPI based device registration so that the driver
can be also enabled through ACPI table.
Signed-off-by: Gowthami Thiagarajan <gthiagarajan@marvell.com>
Link: https://lore.kernel.org/r/20221209053607.3929964-1-gthiagarajan@marvell.comSigned-off-by: Will Deacon <will@kernel.org>

Although we treat the DTM counters as free-running such that we're not
too concerned about the initial DTM state, it's possible for a previous
user to have left DTM counters enabled and paired with DTC counters.
Thus if the first events are scheduled using some, but not all, DTMs,
the as-yet-unused ones could end up adding spurious increments to the
event counts at the DTC. Make sure we sync our initial DTM_PMU_CONFIG
state to all the DTMs at probe time to avoid that possibility.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ba5f38b3dc733cd06bfb5e659b697e76d18c2183.1670269572.git.robin.murphy@arm.comSigned-off-by: Will Deacon <will@kernel.org>

Use hisi_pmu_init() function to simplify initialization of "cpa_pmu->pmu".
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20230119100307.3660-4-hejunhao3@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Use "hisi_pmu" to simplify the parameter list for the hisi_pmu_init()
function.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20230119100307.3660-3-hejunhao3@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Missed initialization the variable of pmu::capabilities when extract
the initialization code of hisi_pmu->pmu into a function.

HISI UNCORE PMU drivers counters that not support context exclusion.
So we have to advertise the PERF_PMU_CAP_NO_EXCLUDE capability.
This ensures that perf will prevent us from handling events where
any exclusion flags are set.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20230119100307.3660-2-hejunhao3@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Pull powerpc fixes from Michael Ellerman:

 - Three fixes for various bogosity in our linker script, revealed
   by the recent commit which changed discard behaviour with some
   toolchains.

* tag 'powerpc-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/vmlinux.lds: Don't discard .comment
  powerpc/vmlinux.lds: Don't discard .rela* for relocatable builds
  powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT

Pull memblock fixes from Mike Rapoport:
 "Small fixes in kernel-doc and tests:

   - Fix kernel-doc for memblock_phys_free() to use correct names for
     the counterpart allocation methods

   - Fix compilation error in memblock tests"

* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: Fix doc for memblock_phys_free
  memblock tests: Fix compilation error.

Pull NFS client fixes from Trond Myklebust:

 - Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls

 - Fix a broken coalescing test in the pNFS file layout driver

 - Ensure that the access cache rcu path also applies the login test

 - Fix up for a sparse warning

* tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix up a sparse warning
  NFS: Judge the file access cache's timestamp in rcu path
  pNFS/filelayout: Fix coalescing test for single DS
  SUNRPC: ensure the matching upcall is in-flight upon downcall

Pull cifs fixes from Steve French:
 "cifs/smb3 client fixes:

   - two multichannel fixes

   - three reconnect fixes

   - unmap fix"

* tag '6.2-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix interface count calculation during refresh
  cifs: refcount only the selected iface during interface update
  cifs: protect access of TCP_Server_Info::{dstaddr,hostname}
  cifs: fix race in assemble_neg_contexts()
  cifs: ignore ipc reconnect failures during dfs failover
  cifs: Fix kmap_local_page() unmapping

Pull devicetree fixes from Rob Herring:

 - Fix DT memory scanning for some MIPS boards when memory is not
   specified in DT

 - Redo CONFIG_CMDLINE* handling for missing /chosen node. The first
   attempt broke PS3 (and possibly other PPC platforms).

 - Fix constraints in QCom Soundwire schema

* tag 'devicetree-fixes-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: fdt: Honor CONFIG_CMDLINE* even without /chosen node, take 2
  Revert "of: fdt: Honor CONFIG_CMDLINE* even without /chosen node"
  dt-bindings: soundwire: qcom,soundwire: correct sizes related to number of ports
  of/fdt: run soc memory setup when early_init_dt_scan_memory fails

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 6.2-rc3 that resolve some
  reported issues. They include:

   - of-reported ulpi problem, so the offending commit is reverted

   - dwc3 driver bugfixes for recent changes

   - fotg210 fixes

  Most of these have been in linux-next for a while, the last few were
  on the mailing list for a long time and passed all the 0-day bot
  testing so all should be fine with them as well"

* tag 'usb-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: gadget: Ignore End Transfer delay on teardown
  usb: dwc3: xilinx: include linux/gpio/consumer.h
  usb: fotg210-udc: fix error return code in fotg210_udc_probe()
  usb: fotg210: fix OTG-only build
  Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"

Pull rdma fixes from Jason Gunthorpe:
 "Most noticeable is that Yishai found a big data corruption regression
  due to a change in the scatterlist:

   - Do not wrongly combine non-contiguous pages in scatterlist

   - Fix compilation warnings on gcc 13

   - Oops when using some mlx5 stats

   - Bad enforcement of atomic responder resources in mlx5"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  lib/scatterlist: Fix to merge contiguous pages into the last SG properly
  RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
  RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device
  RDMA/srp: Move large values to a new enum for gcc13

Merge tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix single *.ko build

 - Fix module builds when vmlinux.o or Module.symver is missing

* tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: readd -w option when vmlinux.o or Module.symver is missing
  kbuild: fix single *.ko build

Pull drm fixes from Daniel Vetter:
 "Still not much, but more than last week. Dave should be back next week
  from the beaching.

  drivers:
   - i915-gvt fixes
   - amdgpu/kfd fixes
   - panfrost bo refcounting fix
   - meson afbc corruption fix
   - imx plane width fix

  core:
   - drm/sched fixes
   - drm/mm kunit test fix
   - dma-buf export error handling fixes"

* tag 'drm-fixes-2023-01-06' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/amd/display: Enable Freesync Video Mode by default"
  drm/i915/gvt: fix double free bug in split_2MB_gtt_entry
  drm/i915/gvt: use atomic operations to change the vGPU status
  drm/i915/gvt: fix vgpu debugfs clean in remove
  drm/i915/gvt: fix gvt debugfs destroy
  drm/i915: unpin on error in intel_vgpu_shadow_mm_pin()
  drm/amd/display: Uninitialized variables causing 4k60 UCLK to stay at DPM1 and not DPM0
  drm/amdkfd: Fix kernel warning during topology setup
  drm/scheduler: Fix lockup in drm_sched_entity_kill()
  drm/imx: ipuv3-plane: Fix overlay plane width
  drm/scheduler: Fix lockup in drm_sched_entity_kill()
  drm/virtio: Fix memory leak in virtio_gpu_object_create()
  drm/meson: Reduce the FIFO lines held when AFBC is not used
  drm/tests: reduce drm_mm_test stack usage
  drm/panfrost: Fix GEM handle creation ref-counting
  drm/plane-helper: Add the missing declaration of drm_atomic_state
  dma-buf: fix dma_buf_export init order v2

TPM 1 is sometimes broken across system suspends, due to races or
locking issues or something else that haven't been diagnosed or fixed
yet, most likely having to do with concurrent reads from the TPM's
hardware random number generator driver. These issues prevent the system
from actually suspending, with errors like:

  tpm tpm0: A TPM error (28) occurred continue selftest
  ...
  tpm tpm0: A TPM error (28) occurred attempting get random
  ...
  tpm tpm0: Error (28) sending savestate before suspend
  tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28
  tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28
  tpm_tis 00:08: PM: failed to suspend: error 28
  PM: Some devices failed to suspend, or early wake event detected

This issue was partially fixed by 23393c64 ("char: tpm: Protect
tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took
directly because the TPM maintainers weren't available. However, it
seems like this just addresses the most common cases of the bug, rather
than addressing it entirely. So there are more things to fix still,
apparently.

In lieu of actually fixing the underlying bug, just allow system suspend
to continue, so that laptops still go to sleep fine. Later, this can be
reverted when the real bug is fixed.

Link: https://lore.kernel.org/lkml/7cbe96cf-e0b5-ba63-d1b4-f63d2e826efa@suse.cz/
Cc: stable@vger.kernel.org # 6.1+
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Luigi Semenzato <semenzato@chromium.org>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.

The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is.  So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.

While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON).

Reported-by: syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com
Fixes: 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check")
Fixes: 8d824e69 ("hfs: fix OOB Read in __hfs_brec_find")
Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fixes from Jens Axboe:
 "The big change here is obviously the revert of the pktcdvd driver
  removal. Outside of that, just minor tweaks. In detail:

   - Re-instate the pktcdvd driver, which necessitates adding back
     bio_copy_data_iter() and the fops->devnode() hook for now (me)

   - Fix for splitting of a bio marked as NOWAIT, causing either nowait
     reads or writes to error with EAGAIN even if parts of the IO
     completed (me)

   - Fix for ublk, punting management commands to io-wq as they can all
     easily block for extended periods of time (Ming)

   - Removal of SRCU dependency for the block layer (Paul)"

* tag 'block-2023-01-06' of git://git.kernel.dk/linux:
  block: Remove "select SRCU"
  Revert "pktcdvd: remove driver."
  Revert "block: remove devnode callback from struct block_device_operations"
  Revert "block: bio_copy_data_iter"
  ublk: honor IO_URING_F_NONBLOCK for handling control command
  block: don't allow splitting of a REQ_NOWAIT bio
  block: handle bio_split_to_limits() NULL return

Pull io_uring fixes from Jens Axboe:
 "A few minor fixes that should go into the 6.2 release:

   - Fix for a memory leak in io-wq worker creation, if we ultimately
     end up canceling the worker creation before it gets created (me)

   - lockdep annotations for the CQ locking (Pavel)

   - A regression fix for CQ timeout handling (Pavel)

   - Ring pinning around deferred task_work fix (Pavel)

   - A trivial member move in struct io_ring_ctx, saving us some memory
     (me)"

* tag 'io_uring-2023-01-06' of git://git.kernel.dk/linux:
  io_uring: fix CQ waiting timeout handling
  io_uring: move 'poll_multi_queue' bool in io_ring_ctx
  io_uring: lockdep annotate CQ locking
  io_uring: pin context while queueing deferred tw
  io_uring/io-wq: free worker if task_work creation is canceled

Pull arm TIF_NOTIFY_SIGNAL fixup from Jens Axboe:
 "Hui Tang reported a performance regressions with _TIF_WORK_MASK in
  newer kernels, which he tracked to a change that went into 5.11. After
  this change, we'll call do_work_pending() more often than we need to,
  because we're now testing bits 0..15 rather than just 0..7.

  Shuffle the bits around to avoid this"

* tag 'tif-notify-signal-2023-01-06' of git://git.kernel.dk/linux:
  ARM: renumber bits related to _TIF_WORK_MASK

Pull ceph fixes from Ilya Dryomov:
 "Two file locking fixes from Xiubo"

* tag 'ceph-for-6.2-rc3' of https://github.com/ceph/ceph-client:
  ceph: avoid use-after-free in ceph_fl_release_lock()
  ceph: switch to vfs_inode_has_locks() to fix file lock bug

Pull UDF fixes from Jan Kara:
 "Two fixups of the UDF changes that went into 6.2-rc1"

* tag 'fixes_for_v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: initialize newblock to 0
  udf: Fix extension of the last extent in the file

Pull btrfs fixes from David Sterba:
 "A few more regression and regular fixes:

   - regressions:
       - fix assertion condition using = instead of ==
       - fix false alert on bad tree level check
       - fix off-by-one error in delalloc search during lseek

   - fix compat ro feature check at read-write remount

   - handle case when read-repair happens with ongoing device replace

   - updated error messages"

* tag 'for-6.2-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix compat_ro checks against remount
  btrfs: always report error in run_one_delayed_ref()
  btrfs: handle case when repair happens with dev-replace
  btrfs: fix off-by-one in delalloc search during lseek
  btrfs: fix false alert on bad tree level check
  btrfs: add error message for metadata level mismatch
  btrfs: fix ASSERT em->len condition in btrfs_get_extent

Pull RISC-V fixes from Palmer Dabbelt:

 - use the correct mask for c.jr/c.jalr when decoding instructions

 - build fix for get_user() to avoid a sparse warning

* tag 'riscv-for-linus-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: uaccess: fix type of 0 variable on error in get_user()
  riscv, kprobes: Stricter c.jr/c.jalr decoding

Merge tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix segfault when trying to process tracepoints present in a
   perf.data file and not linked with libtraceevent.

 - Fix build on uClibc systems by adding missing sys/types.h include,
   that was being obtained indirectly which stopped being the case when
   tools/lib/traceevent was removed.

 - Don't show commands in 'perf help' that depend on linking with
   libtraceevent when not building with that library, which is now a
   possibility since we no longer ship a copy in tools/lib/traceevent.

 - Fix failure in 'perf test' entry testing the combination of 'perf
   probe' user space function + 'perf record' + 'perf script' where it
   expects a backtrace leading to glibc's inet_pton() from 'ping' that
   now happens more than once with glibc 2.35 for IPv6 addreses.

 - Fix for the inet_pton perf test on s/390 where
   'text_to_binary_address' now appears on the backtrace.

 - Fix build error on riscv due to missing header for 'struct
   perf_sample'.

 - Fix 'make -C tools perf_install' install variant by not propagating
   the 'subdir' to submakes for the 'install_headers' targets.

 - Fix handling of unsupported cgroup events when using BPF counters in
   'perf stat'.

 - Count all cgroups, not just the last one when using 'perf stat' and
   combining --for-each-cgroup with --bpf-counters.

   This makes the output using BPF counters match the output without
   using it, which was the intention all along, the output should be the
   same using --bpf-counters or not.

 - Fix 'perf lock contention' core dump related to not finding the
   "__sched_text_end" symbol on s/390.

 - Fix build failure when HEAD is signed: exclude the signature from the
   version string.

 - Add missing closedir() calls to in perf_data__open_dir(), plugging a
   fd leak.

* tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Fix build on uClibc systems by adding missing sys/types.h include
  perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
  perf stat: Fix handling of unsupported cgroup events when using BPF counters
  perf test record_probe_libc_inet_pton: Fix test on s/390 where 'text_to_binary_address' now appears on the backtrace
  perf lock contention: Fix core dump related to not finding the "__sched_text_end" symbol on s/390
  perf build: Don't propagate subdir to submakes for install_headers
  perf test record_probe_libc_inet_pton: Fix failure due to extra inet_pton() backtrace in glibc >= 2.35
  perf tools: Fix segfault when trying to process tracepoints in perf.data and not linked with libtraceevent
  perf tools: Don't include signature in version strings
  perf help: Use HAVE_LIBTRACEEVENT to filter out unsupported commands
  perf tools riscv: Fix build error on riscv due to missing header for 'struct perf_sample'
  perf tools: Fix resources leak in perf_data__open_dir()

Pull perf fix from Ingo Molnar:
 "Intel RAPL updates for new model IDs"

* tag 'perf-urgent-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/rapl: Add support for Intel Emerald Rapids
  perf/x86/rapl: Add support for Intel Meteor Lake
  perf/x86/rapl: Treat Tigerlake like Icelake

Pull crypto fixes from Herbert Xu:
 "This fixes a CFI crash in arm64/sm4 as well as a regression in the
  caam driver"

* tag 'v6.2-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: arm64/sm4 - fix possible crash with CFI enabled
  crypto: caam - fix CAAM io mem access in blob_gen

If we delay sending End Transfer for Setup TRB to be prepared, we need
to check if the End Transfer was in preparation for a driver
teardown/soft-disconnect. In those cases, just send the End Transfer
command without delay.

In the case of soft-disconnect, there's a very small chance the command
may not go through immediately. But should it happen, the Setup TRB will
be prepared during the polling of the controller halted state, allowing
the command to go through then.

In the case of disabling endpoint due to reconfiguration (e.g.
set_interface(alt-setting) or usb reset), then it's driven by the host.
Typically the host wouldn't immediately cancel the control request and
send another control transfer to trigger the End Transfer command
timeout.

Fixes: 4db0fbb6 ("usb: dwc3: gadget: Don't delay End Transfer on delayed_status")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/f1617a323e190b9cc408fb8b65456e32b5814113.1670546756.git.Thinh.Nguyen@synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The newly added gpio consumer calls cause a build failure in configurations
that fail to include the right header implicitly:

drivers/usb/dwc3/dwc3-xilinx.c: In function 'dwc3_xlnx_init_zynqmp':
drivers/usb/dwc3/dwc3-xilinx.c:207:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_clk_get_optional'? [-Werror=implicit-function-declaration]
  207 |         reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
      |                      ^~~~~~~~~~~~~~~~~~~~~~~
      |                      devm_clk_get_optional

Fixes: ca05b382 ("usb: dwc3: xilinx: Add gpio-reset support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230103121755.956027-1-arnd@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>