The error handling calls md_bitmap_free(bitmap) which checks for NULL
but will Oops if we pass an error pointer.  Let's set "bitmap" to NULL
on this error path.

Fixes: afd75628 ("md-cluster/raid10: resize all the bitmaps before start reshape")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

"sync_completed" and "degraded" belongs to redundancy attr group,
it was not exist yet when md device was created.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: e1a86dbb ("md: fix deadlock causing by sysfs_notify")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.9/drivers

Pull MD fixes from Song.

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid5: Allow degraded raid6 to do rmw
  md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
  raid5: don't duplicate code for different paths in handle_stripe
  raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show
  md: print errno in super_written
  md/raid5: remove the redundant setting of STRIPE_HANDLE
  md: register new md sysfs file 'uuid' read-only
  md: fix max sectors calculation for super 1.0

Degraded raid6 always do reconstruct-write now. With raid6 xor supported,
we can do rmw in degraded raid6. This patch can reduce many read IOs to
improve performance.

If the failed disk is P, Q or the disk we want to write to, we may need to
do reconstruct-write in max degraded raid6. In this situation we can not
read enough data from handle_stripe_dirtying() so we have to set force_rcw
in handle_stripe_fill() to read all data.
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: BingJing Chang <bingjingc@synology.com>
Reviewed-by: Danny Shih <dannyshih@synology.com>
Signed-off-by: ChangSyun Peng <allenpeng@synology.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

In degraded raid5, we need to read parity to do reconstruct-write when
data disks fail. However, we can not read parity from
handle_stripe_dirtying() in force reconstruct-write mode.

Reproducible Steps:

1. Create degraded raid5
mdadm -C /dev/md2 --assume-clean -l5 -n3 /dev/sda2 /dev/sdb2 missing
2. Set rmw_level to 0
echo 0 > /sys/block/md2/md/rmw_level
3. IO to raid5

Now some io may be stuck in raid5. We can use handle_stripe_fill() to read
the parity in this situation.

Cc: <stable@vger.kernel.org> # v4.4+
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: BingJing Chang <bingjingc@synology.com>
Reviewed-by: Danny Shih <dannyshih@synology.com>
Signed-off-by: ChangSyun Peng <allenpeng@synology.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

As we can see, R5_LOCKED is set and s.locked is increased whether
R5_ReWrite is set or not, so move it to common path.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Replace mddev_lock with spin_lock to align with other show methods in
raid5_attrs.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

It is better to print errno instead of bi_status.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

The flag is already set before compare rcw with rmw, so it is
not necessary to do it again.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Report the UUID of the MD array in the following format:
xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

This is useful if you don't want to wait for udev to identify array.
And it is also easy for script to monitor it with the format.
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
[Guoqing: mention the change in md.rst]
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

To grow size of super 1.0 raid array, it is necessary to check the device
max usable size.

Now it uses rdev->sectors for max usable size. If one disk is 500G and the
raid device only uses the 100GB of this disk. rdev->sectors can't tell the
real max usable size. The max usable size should be

dev_size-(superblock_size+bitmap_size+badblock_size).

Also, remove unnecessary sb_start update in super_1_rdev_size_change().
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Pull NVMe updates from Christoph.

* 'nvme-5.9' of git://git.infradead.org/nvme: (30 commits)
  nvme-loop: remove extra variable in create ctrl
  nvme-loop: set ctrl state connecting after init
  nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths
  nvme-multipath: fix logic for non-optimized paths
  nvme-rdma: fix controller reset hang during traffic
  nvme-tcp: fix controller reset hang during traffic
  nvmet: introduce the passthru Kconfig option
  nvmet: introduce the passthru configfs interface
  nvmet: Add passthru enable/disable helpers
  nvmet: add passthru code to process commands
  nvme: export nvme_find_get_ns() and nvme_put_ns()
  nvme: introduce nvme_ctrl_get_by_path()
  nvme: introduce nvme_execute_passthru_rq to call nvme_passthru_[start|end]()
  nvme: create helper function to obtain command effects
  nvme: clear any SGL flags in passthru commands
  nvmet-fc: remove redundant del_work_active flag
  nvmet-fc: check successful reference in nvmet_fc_find_target_assoc
  nvme-fc: set max_segments to lldd max value
  nvme-fc: drop a duplicated word in a comment
  nvme-hwmon: log the controller device name
  ...

We can call the nvme_change_ctrl_state() directly and have
WARN_ON_ONCE(1) call instead of having to use an extra variable which
matches the name of the function.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When creating a loop controller (ctrl) in nvme_loop_create_ctrl() ->
nvme_init_ctrl() we set the ctrl state to NVME_CTRL_NEW.

Prior to [1] NVME_CTRL_NEW state was allowed in nvmf_check_ready() for
fabrics command type connect. Now, this fails in the following code path
for fabrics connect command when creating admin queue :-

nvme_loop_create_ctrl()
 nvme_loo_configure_admin_queue()
  nvmf_connect_admin_queue()
   __nvme_submit_sync_cmd()
    blk_execute_rq()
      nvme_loop_queue_rq()
	nvmf_check_ready()

# echo  "transport=loop,nqn=fs" > /dev/nvme-fabrics
[ 6047.741327] nvmet: adding nsid 1 to subsystem fs
[ 6048.756430] nvme nvme1: Connect command failed, error wo/DNR bit: 880

We need to set the ctrl state to NVME_CTRL_CONNECTING after :-
nvme_loop_create_ctrl()
 nvme_init_ctrl()
so that the above mentioned check for nvmf_check_ready() will return
true.

This patch sets the ctrl state to connecting after we init the ctrl in
nvme_loop_create_ctrl()
 nvme_init_ctrl() .

[1] commit aa63fa6776a7 ("nvme-fabrics: allow to queue requests for live queues")

Fixes: aa63fa6776a7 ("nvme-fabrics: allow to queue requests for live queues")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When nvme_round_robin_path() finds a valid namespace we should be using it;
falling back to __nvme_find_path() for non-optimized paths will cause the
result from nvme_round_robin_path() to be ignored for non-optimized paths.

Fixes: 75c10e73 ("nvme-multipath: round-robin I/O policy")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Handle the special case where we have exactly one optimized path,
which we should keep using in this case.

Fixes: 75c10e73 ("nvme-multipath: round-robin I/O policy")
Signed off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

commit fe35ec58 ("block: update hctx map when use multiple maps")
exposed an issue where we may hang trying to wait for queue freeze
during I/O. We call blk_mq_update_nr_hw_queues which in case of multiple
queue maps (which we have now for default/read/poll) is attempting to
freeze the queue. However we never started queue freeze when starting the
reset, which means that we have inflight pending requests that entered the
queue that we will not complete once the queue is quiesced.

So start a freeze before we quiesce the queue, and unfreeze the queue
after we successfully connected the I/O queues (and make sure to call
blk_mq_update_nr_hw_queues only after we are sure that the queue was
already frozen).

This follows to how the pci driver handles resets.

Fixes: fe35ec58 ("block: update hctx map when use multiple maps")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

commit fe35ec58 ("block: update hctx map when use multiple maps")
exposed an issue where we may hang trying to wait for queue freeze
during I/O. We call blk_mq_update_nr_hw_queues which in case of multiple
queue maps (which we have now for default/read/poll) is attempting to
freeze the queue. However we never started queue freeze when starting the
reset, which means that we have inflight pending requests that entered the
queue that we will not complete once the queue is quiesced.

So start a freeze before we quiesce the queue, and unfreeze the queue
after we successfully connected the I/O queues (and make sure to call
blk_mq_update_nr_hw_queues only after we are sure that the queue was
already frozen).

This follows to how the pci driver handles resets.

Fixes: fe35ec58 ("block: update hctx map when use multiple maps")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This patch updates KConfig file for the NVMeOF target where we add new
option so that user can selectively enable/disable passthru code.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[logang@deltatee.com: fixed some of the wording in the help message]
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When CONFIG_NVME_TARGET_PASSTHRU as 'passthru' directory will
be added to each subsystem. The directory is similar to a namespace
and has two attributes: device_path and enable. The user must set the
path to the nvme controller's char device and write '1' to enable the
subsystem to use passthru.

Any given subsystem is prevented from enabling both a regular namespace
and the passthru device. If one is enabled, enabling the other will
produce an error.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This patch adds helper functions which are used in the NVMeOF configfs
when the user is configuring the passthru subsystem. Here we ensure
that only one subsys is assigned to each nvme_ctrl by using an xarray
on the cntlid.

The subsystem's version number is overridden by the passed through
controller's version. However, if that version is less than 1.2.1,
then we bump the advertised version to that and print a warning
in dmesg.
Based-on-a-patch-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add passthru command handling capability for the NVMeOF target and
export passthru APIs which are used to integrate passthru
code with nvmet-core.

The new file passthru.c handles passthru cmd parsing and execution.
In the passthru mode, we create a block layer request from the nvmet
request and map the data on to the block layer request.

Admin commands and features are on an allow list as there are a number
of each that don't make too much sense with passthrough. We use an
allow list such that new commands can be considered before being blindly
passed through. In both cases, vendor specific commands are always
allowed.

We also reject reservation IO commands as the underlying device cannot
differentiate between multiple hosts behind a fabric.
Based-on-a-patch-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme_find_get_ns() and nvme_put_ns() are required by the target passthru
code and are exported under the NVME_TARGET_PASSTHRU namespace.
Based-on-a-patch-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme_ctrl_get_by_path() is analogous to blkdev_get_by_path() except it
gets a struct nvme_ctrl from the path to its char dev (/dev/nvme0).
It makes use of filp_open() to open the file and uses the private
data to obtain a pointer to the struct nvme_ctrl. If the fops of the
file do not match, -EINVAL is returned.

The purpose of this function is to support NVMe-OF target passthru
and is exported under the NVME_TARGET_PASSTHRU namespace.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Introduce a new nvme_execute_passthru_rq() helper which calls
nvme_passthru_[start|end]() around blk_execute_rq(). This ensures
all passthru calls (including nvme_submit_io()) will be wrapped
appropriately.

nvme_execute_passthru_rq() will also be useful for the nvmet passthru
code and is exported in the NVME_TARGET_PASSTHRU namespace.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Separate the code to obtain command effects from the code
to start a passthru request and move the nvme_passthru_start() and
nvme_passthru_end() functions up above nvme_submit_user_cmd() in order
that they may be used in a new helper a subsequent patch.

The new helper function will be necessary for nvmet passthru
code to determine if we need to change out of interrupt context
to handle the effects. It is exported in the NVME_TARGET_PASSTHRU
namespace.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The host driver should decide whether to use SGLs or PRPs and they
currently assume the flags are cleared after the call to
nvme_setup_cmd(). However, passed-through commands may erroneously
set these bits; so clear them for all cases.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The transport has a del_work_active flag to avoid duplicate scheduling
of the del_work item. This is redundant with the checks that
schedule_work() makes.

Remove the del_work_active flag.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When searching for an association based on an association id, when there
is a match, the code takes a reference. However, it is not validating
that the reference taking was successful.

Check the status of the reference. If unsuccessful, the device is being
deleted and should be ignored.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Currently the FC transport is set max_hw_sectors based on the lldds
max sgl segment count. However, the block queue max segments is
set based on the controller's max_segments count, which the transport
does not set.  As such, the lldd is receiving sgl lists that are
exceeding its max segment count.

Set the controller max segment count and derive max_hw_sectors from
the max segment count.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Drop the repeated word "a" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Stay consistent with the rest of the driver
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

A deadlock happens in the following scenario with multipath:
1) scan_work(nvme0) detects a new nsid while nvme0
    is an optimized path to it, path nvme1 happens to be
    inaccessible.

2) Before scan_work is complete nvme0 disconnect is initiated
    nvme_delete_ctrl_sync() sets nvme0 state to NVME_CTRL_DELETING

3) scan_work(1) attempts to submit IO,
    but nvme_path_is_optimized() observes nvme0 is not LIVE.
    Since nvme1 is a possible path IO is requeued and scan_work hangs.

--
Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel:  __schedule+0x2b9/0x6c0
kernel:  schedule+0x42/0xb0
kernel:  io_schedule+0x16/0x40
kernel:  do_read_cache_page+0x438/0x830
kernel:  read_cache_page+0x12/0x20
kernel:  read_dev_sector+0x27/0xc0
kernel:  read_lba+0xc1/0x220
kernel:  efi_partition+0x1e6/0x708
kernel:  check_partition+0x154/0x244
kernel:  rescan_partitions+0xae/0x280
kernel:  __blkdev_get+0x40f/0x560
kernel:  blkdev_get+0x3d/0x140
kernel:  __device_add_disk+0x388/0x480
kernel:  device_add_disk+0x13/0x20
kernel:  nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel:  nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel:  nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel:  nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel:  nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel:  nvme_validate_ns+0x396/0x940 [nvme_core]
kernel:  nvme_scan_work+0x24f/0x380 [nvme_core]
kernel:  process_one_work+0x1db/0x380
kernel:  worker_thread+0x249/0x400
kernel:  kthread+0x104/0x140
--

4) Delete also hangs in flush_work(ctrl->scan_work)
    from nvme_remove_namespaces().

Similiarly a deadlock with ana_work may happen: if ana_work has started
and calls nvme_mpath_set_live and device_add_disk, it will
trigger I/O. When we trigger disconnect I/O will block because
our accessible (optimized) path is disconnecting, but the alternate
path is inaccessible, so I/O blocks. Then disconnect tries to flush
the ana_work and hangs.

[  605.550896] Workqueue: nvme-wq nvme_ana_work [nvme_core]
[  605.552087] Call Trace:
[  605.552683]  __schedule+0x2b9/0x6c0
[  605.553507]  schedule+0x42/0xb0
[  605.554201]  io_schedule+0x16/0x40
[  605.555012]  do_read_cache_page+0x438/0x830
[  605.556925]  read_cache_page+0x12/0x20
[  605.557757]  read_dev_sector+0x27/0xc0
[  605.558587]  amiga_partition+0x4d/0x4c5
[  605.561278]  check_partition+0x154/0x244
[  605.562138]  rescan_partitions+0xae/0x280
[  605.563076]  __blkdev_get+0x40f/0x560
[  605.563830]  blkdev_get+0x3d/0x140
[  605.564500]  __device_add_disk+0x388/0x480
[  605.565316]  device_add_disk+0x13/0x20
[  605.566070]  nvme_mpath_set_live+0x5e/0x130 [nvme_core]
[  605.567114]  nvme_update_ns_ana_state+0x2c/0x30 [nvme_core]
[  605.568197]  nvme_update_ana_state+0xca/0xe0 [nvme_core]
[  605.569360]  nvme_parse_ana_log+0xa1/0x180 [nvme_core]
[  605.571385]  nvme_read_ana_log+0x76/0x100 [nvme_core]
[  605.572376]  nvme_ana_work+0x15/0x20 [nvme_core]
[  605.573330]  process_one_work+0x1db/0x380
[  605.574144]  worker_thread+0x4d/0x400
[  605.574896]  kthread+0x104/0x140
[  605.577205]  ret_from_fork+0x35/0x40
[  605.577955] INFO: task nvme:14044 blocked for more than 120 seconds.
[  605.579239]       Tainted: G           OE     5.3.5-050305-generic #201910071830
[  605.580712] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  605.582320] nvme            D    0 14044  14043 0x00000000
[  605.583424] Call Trace:
[  605.583935]  __schedule+0x2b9/0x6c0
[  605.584625]  schedule+0x42/0xb0
[  605.585290]  schedule_timeout+0x203/0x2f0
[  605.588493]  wait_for_completion+0xb1/0x120
[  605.590066]  __flush_work+0x123/0x1d0
[  605.591758]  __cancel_work_timer+0x10e/0x190
[  605.593542]  cancel_work_sync+0x10/0x20
[  605.594347]  nvme_mpath_stop+0x2f/0x40 [nvme_core]
[  605.595328]  nvme_stop_ctrl+0x12/0x50 [nvme_core]
[  605.596262]  nvme_do_delete_ctrl+0x3f/0x90 [nvme_core]
[  605.597333]  nvme_sysfs_delete+0x5c/0x70 [nvme_core]
[  605.598320]  dev_attr_store+0x17/0x30

Fix this by introducing a new state: NVME_CTRL_DELETE_NOIO, which will
indicate the phase of controller deletion where I/O cannot be allowed
to access the namespace. NVME_CTRL_DELETING still allows mpath I/O to
be issued to the bottom device, and only after we flush the ana_work
and scan_work (after nvme_stop_ctrl and nvme_prep_remove_namespaces)
we change the state to NVME_CTRL_DELETING_NOIO. Also we prevent ana_work
from re-firing by aborting early if we are not LIVE, so we should be safe
here.

In addition, change the transport drivers to follow the updated state
machine.

Fixes: 0d0b660f ("nvme: add ANA support")
Reported-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We are starting to see some non-trivial states
so lets start documenting them.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This patch replaces the ctrl->namespaces tracking from linked list to
xarray and improves the performance when accessing one namespce :-

XArray vs Default:-

IOPS and BW (more the better) increase BW (~1.8%):-
---------------------------------------------------

 XArray :-
  read:  IOPS=160k,  BW=626MiB/s  (656MB/s)(18.3GiB/30001msec)
  read:  IOPS=160k,  BW=626MiB/s  (656MB/s)(18.3GiB/30001msec)
  read:  IOPS=162k,  BW=631MiB/s  (662MB/s)(18.5GiB/30001msec)

 Default:-
  read:  IOPS=156k,  BW=609MiB/s  (639MB/s)(17.8GiB/30001msec)
  read:  IOPS=157k,  BW=613MiB/s  (643MB/s)(17.0GiB/30001msec)
  read:  IOPS=160k,  BW=626MiB/s  (656MB/s)(18.3GiB/30001msec)

Submission latency (less the better) decrease (~8.3%):-
-------------------------------------------------------

 XArray:-
  slat  (usec):  min=7,  max=8386,  avg=11.19,  stdev=5.96
  slat  (usec):  min=7,  max=441,   avg=11.09,  stdev=4.48
  slat  (usec):  min=7,  max=1088,  avg=11.21,  stdev=4.54

 Default :-
  slat  (usec):  min=8,   max=2826.5k,  avg=23.96,  stdev=3911.50
  slat  (usec):  min=8,   max=503,      avg=12.52,  stdev=5.07
  slat  (usec):  min=8,   max=2384,     avg=12.50,  stdev=5.28

CPU Usage (less the better) decrease (~5.2%):-
----------------------------------------------

 XArray:-
  cpu  :  usr=1.84%,  sys=18.61%,  ctx=949471,  majf=0,  minf=250
  cpu  :  usr=1.83%,  sys=18.41%,  ctx=950262,  majf=0,  minf=237
  cpu  :  usr=1.82%,  sys=18.82%,  ctx=957224,  majf=0,  minf=234

 Default:-
  cpu  :  usr=1.70%,  sys=19.21%,  ctx=858196,  majf=0,  minf=251
  cpu  :  usr=1.82%,  sys=19.98%,  ctx=929720,  majf=0,  minf=227
  cpu  :  usr=1.83%,  sys=20.33%,  ctx=947208,  majf=0,  minf=235.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Has the driver use shared CQs providing ~10%-20% improvement when
multiple disks are used. Instead of opening a CQ for each QP per
controller, a CQ for each core will be provided by the RDMA core driver
that will be shared between the QPs on that core reducing interrupt
overhead.
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Has the driver use shared CQs providing ~10%-20% improvement as seen in
the patch introducing shared CQs. Instead of opening a CQ for each QP
per controller connected, a CQ for each QP will be provided by the RDMA
core driver that will be shared between the QPs on that core reducing
interrupt overhead.
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This patch implements a solution for a BIOS hack used on some currently
shipping Intel systems to change driver power management policy for PCIe
NVMe drives. Some newer Intel platforms, like some Comet Lake systems,
require that PCIe devices use D3 when doing suspend-to-idle in order to
allow the platform to realize maximum power savings. This is particularly
needed to support ATX power supply shutdown on desktop systems. In order to
ensure this happens for root ports with storage devices, Microsoft
apparently created this ACPI _DSD property as a way to influence their
driver policy. To my knowledge this property has not been discussed with
the NVME specification body.

Though the solution is not ideal, it addresses a problem that also affects
Linux since the NVMe driver's default policy of using NVMe APST during
suspend-to-idle prevents the PCI root port from going to D3 and leads to
higher power consumption for these platforms. The power consumption
difference may be negligible on laptop systems, but many watts on desktop
systems when the ATX power supply is blocked from powering down.

The patch creates a new nvme_acpi_storage_d3 function to check for the
StorageD3Enable property during probe and enables D3 as a quirk if set.  It
also provides a 'noacpi' module parameter to allow skipping the quirk if
needed.

Tested with:
 - PM961 NVMe SED Samsung 512GB
 - INTEL SSDPEKKF512G8

Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-introSigned-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

>From the initial implementation of NVMe SGL kernel support
commit a7a7cbe3 ("nvme-pci: add SGL support") with addition of the
commit 943e942e ("nvme-pci: limit max IO size and segments to avoid
high order allocations") now there is only caller left for
nvme_pci_iod_alloc_size() which statically passes true for last
parameter that calculates allocation size based on SGL since we need
size of biggest command supported for mempool allocation.

This patch modifies the helper functions nvme_pci_iod_alloc_size() such
that it is now uses maximum of PRP and SGL size for iod allocation size
calculation.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Saving the nvme controller's page size was from a time when the driver
tried to use different sized pages, but this value is always set to
a constant, and has been this way for some time. Remove the 'page_size'
field and replace its usage with the constant value.

This also lets the compiler make some micro-optimizations in the io
path, and that's always a good thing.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>