- 25 Jul, 2024 4 commits
-
-
Takashi Iwai authored
Merge tag 'asoc-fix-v6.11-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.11 A selection of routine fixes and quirks that came in since the merge window. The fsl-asoc-card change is a fix for systems with multiple cards where updating templates in place leaks data from one card to another.
-
Shengjiu Wang authored
The static snd_soc_dai_link_components cause conflict for multiple instances of this generic driver. For example, when there is wm8962 and SPDIF case enabled together, the contaminated snd_soc_dai_link_components will cause another device probe fail. Fixes: 6d174cc4 ("ASoC: fsl-asoc-card: merge spdif support from imx-spdif.c") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://patch.msgid.link/1721877773-5229-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
Lenovo Thinkpad E16 Gen 2 AMD model (model 21M5) needs a corresponding quirk entry for making the internal mic working. Link: https://bugzilla.suse.com/show_bug.cgi?id=1228269 Cc: stable@vger.kernel.org Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240725065442.9293-1-tiwai@suse.deSigned-off-by:
-
Nick Weihs authored
Samsung Galaxy Book3 Pro 360 sends a large amount of data to the codec through hda processing coefficients. This data was captured using a modified version of QEMU, but the actual content of the data remains opaque to me. Elliding any part of the data seems to cause sound to not work. Signed-off-by:
Nick Weihs <nick.weihs@gmail.com> Link: https://patch.msgid.link/20240725054722.42597-1-nick.weihs@gmail.comSigned-off-by:
-
- 24 Jul, 2024 3 commits
-
-
Luke D. Jones authored
Adjust quirks for 0x3a20, 0x3a30, 0x3a50 to match the 0x3a60. This set has now been confirmed to work with this patch. Signed-off-by:
Luke D. Jones <luke@ljones.dev> Fixes: 811dd426 ("ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41") Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240723011224.115579-1-luke@ljones.devSigned-off-by:
-
Peter Ujfalusi authored
The DMA Link ID is set to the IPC message's primary during dai_config, which is only during hw_params. During xrun handling the hw_params is not called and the DMA Link ID information will be lost. All other fields in the message expected to be 0 for re-configuration, only the DMA Link ID needs to be preserved and the in case of repeated dai_config, it is correctly updated (masked and then set). Cc: stable@vger.kernel.org Fixes: ca5ce0ca ("ASoC: SOF: ipc4/intel: Add support for chained DMA") Link: https://github.com/thesofproject/linux/issues/5116Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://patch.msgid.link/20240724081932.24542-3-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Peter Ujfalusi authored
The DMA Link ID is only valid in snd_sof_dai_config_data when the dai_config is called with HW_PARAMS. The commit that this patch fixes is actually moved a code section without changing it, the same bug exists in the original code, needing different patch to kernel prior to 6.9 kernels. Cc: stable@vger.kernel.org Fixes: 3858464d ("ASoC: SOF: ipc4-topology: change chain_dma handling in dai_config") Link: https://github.com/thesofproject/linux/issues/5116Signed-off-by:
-
- 22 Jul, 2024 7 commits
-
-
Takashi Iwai authored
When a Function Block declares it being a legacy MIDI1 device, it has to be only with a single UMP Group. Correct the attribute when a device declares it wrongly. Fixes: 37e0e141 ("ALSA: ump: Support UMP Endpoint and Function Block parsing") Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240722140610.10845-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
When a device tries to update the FB name string even if its Endpoint is declared as static, we should skip it, just already done for the FB info update reply. Fixes: 37e0e141 ("ALSA: ump: Support UMP Endpoint and Function Block parsing") Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240722135929.8612-1-tiwai@suse.deSigned-off-by:
-
wangdicheng authored
Sonix HD USB Camera does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x84". This patch adds the USB ID to quirks.c and avoids those error messages. (snip) [1.789698] usb 3-3: new high-speed USB device number 2 using xhci_hcd [1.984121] usb 3-3: New USB device found, idVendor=0c45, idProduct=6340, bcdDevice= 0.00 [1.984124] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [1.984127] usb 3-3: Product: USB 2.0 Camera [1.984128] usb 3-3: Manufacturer: Sonix Technology Co., Ltd. [5.440957] usb 3-3: 3:1: cannot get freq at ep 0x84 [12.130679] usb 3-3: 3:1: cannot get freq at ep 0x84 [12.175065] usb 3-3: 3:1: cannot get freq at ep 0x84 Signed-off-by:
wangdicheng <wangdicheng@kylinos.cn> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240722084822.31620-1-wangdich9700@163.comSigned-off-by:
-
Dan Carpenter authored
This function has a reversed if statement so it's either a no-op or it leads to a NULL dereference. Fixes: b195acf5 ("ASoC: tas2781: Fix wrong loading calibrated data sequence") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/18a29b68-cc85-4139-b7c7-2514e8409a42@stanley.mountainSigned-off-by:
-
Arnd Bergmann authored
This I2S client driver now uses functions exported from a helper module but fails to link when the helper is disabled: ERROR: modpost: "simple_util_parse_convert" [sound/soc/tegra/snd-soc-tegra210-i2s.ko] undefined! ERROR: modpost: "simple_util_get_sample_fmt" [sound/soc/tegra/snd-soc-tegra210-i2s.ko] undefined! Add a Kconfig select line to ensure it's always turned on here. Fixes: 2502f8dd ("ASoC: tegra: I2S client convert formats handling") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Sameer Pujar <spujar@nvidia.com> Link: https://patch.msgid.link/20240719074831.3253995-1-arnd@kernel.orgSigned-off-by:
-
Pierre-Louis Bossart authored
the Intel kbuild bot reports a link failure when IOSF_MBI is built-in but the Merrifield driver is configured as a module. The soc-intel-quirks.h is included for Merrifield platforms, but IOSF_MBI is not selected for that platform. ld.lld: error: undefined symbol: iosf_mbi_read >>> referenced by atom.c >>> sound/soc/sof/intel/atom.o:(atom_machine_select) in archive vmlinux.a This patch forces the use of the fallback static inline when IOSF_MBI is not reachable. Fixes: 536cfd2f ("ASoC: Intel: use common helpers to detect CPUs") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407160704.zpdhJ8da-lkp@intel.com/Suggested-by:
-
Takashi Iwai authored
The quirk_flags_table[] is sorted in the USB ID order, while the last fix was put at a wrong position. Adjust the entry at the right position. Fixes: 74dba240 ("ALSA: usb-audio: Fix microphone sound on HD webcam.") Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240722080605.23481-1-tiwai@suse.deSigned-off-by:
-
- 19 Jul, 2024 2 commits
-
-
Arnd Bergmann authored
An earlier patch changed the DECLARE_TLV_DB_SCALE declaration, but now there are additional static const variables that cause the same build warnings: In file included from sound/pci/hda/tas2781_hda_i2c.c:23: include/sound/tas2781-tlv.h:23:28: error: 'tas2563_dvc_table' defined but not used [-Werror=unused-const-variable=] 23 | static const unsigned char tas2563_dvc_table[][4] = { | ^~~~~~~~~~~~~~~~~ In file included from include/sound/tlv.h:10, from sound/pci/hda/tas2781_hda_i2c.c:22: include/sound/tas2781-tlv.h:20:35: error: 'tas2563_dvc_tlv' defined but not used [-Werror=unused-const-variable=] 20 | static const DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); | ^~~~~~~~~~~~~~~ Mark them all as unused as well. Signed-off-by: -
wangdicheng authored
I own an external usb Webcam, HD webcam, which had low mic volume and inconsistent sound quality. Video works as expected. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.092610][ 2] [ T3680] usb 5-2.2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [ 96.102436][ 2] [ T3680] usb 5-2.2: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 Set up quirk cval->res to 16 for 256 levels, Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate. Confirmed that happened anyway later due to the backoff mechanism, After 3 failures. All audio stream on device interfaces share the same values, apart from wMaxPacketSize and tSamFreq : bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 3 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 1 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0064 1x 100 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0x0000 (snip) Testing patch provides consistent good sound recording quality and volume range. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.110630][ 3] [ T3680] usbcore: registered new interface driver snd-usb-audio [ 96.114329][ 7] [ T3677] usb 5-2.2: Found UVC 1.00 device HD webcam (1bcf:2281) [ 96.167555][ 7] [ T3677] usbcore: registered new interface driver uvcvideo Signed-off-by:
-
- 18 Jul, 2024 4 commits
-
-
Mark Brown authored
Drivers report a string with a name for each PCM, log it during startup of pcm-test as a diagnostic aid. Signed-off-by:
-
Mark Brown authored
Currently for the PCM and mixer tests we report test names which identify the card being tested with the card number. This ensures we have unique names but since card numbers are dynamically assigned at runtime the names we end up with will often not be stable on systems with multiple cards especially where those cards are provided by separate modules loeaded at runtime. This makes it difficult for automated systems and UIs to relate test results between runs on affected platforms. Address this by replacing our use of card numbers with card names which are more likely to be stable across runs. We use the card ID since it is guaranteed to be unique by default, unlike the long name. There is still some vulnerability to ordering issues if multiple cards with the same base ID are present in the system but have separate dependencies but not all drivers put distinguishing information in their long names. Signed-off-by:
-
Seunghun Han authored
Samsung Galaxy Book Pro 360 (13" 2022 NT935QDB-KC71S) with codec SSID 144d:c1a4 requires the same workaround to enable the speaker amp as other Samsung models with the ALC298 codec. Signed-off-by:
Seunghun Han <kkamagui@gmail.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240718080908.8677-1-kkamagui@gmail.comSigned-off-by:
-
Venkata Prasad Potturu authored
Setting ACP ACLK as clock source when ACP enters D0 state causing firmware load failure, as per design clock source should be internal clock. Remove acp_clkmux_sel field so that ACP will use internal clock source when ACP enters into D0 state. Fixes: d0dab6b7 ("ASoC: SOF: amd: Add sof support for vangogh platform") Signed-off-by:
Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://patch.msgid.link/20240718062004.581685-1-venkataprasad.potturu@amd.comSigned-off-by:
-
- 17 Jul, 2024 3 commits
-
-
Shenghao Ding authored
Add new vendor_id and subsystem_id in quirk for Lenovo Hera2 Laptop. Signed-off-by:
Shenghao Ding <shenghao-ding@ti.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240717115305.723-1-shenghao-ding@ti.comSigned-off-by:
-
Takashi Iwai authored
When the UMP Endpoint is configured with static blocks, the block configuration will never change, hence the unused ports will be unchanged as well. Creating sequencer ports for those unused ports is simply useless, and it might be rather confusing for users. The idea behind the inactive ports was for allowing connections from/to ports that can become usable later, but this will never happen for inactive groups in static blocks. Let's change the sequencer UMP binding to skip those unused ports when the UMP EP is with static blocks. Fixes: 81fd444a ("ALSA: seq: Bind UMP device") Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240717083322.25892-1-tiwai@suse.deSigned-off-by:
-
Shengjiu Wang authored
When suspended, the DMA channel may enter PAUSE state if dmaengine_pause() is supported by DMA. At this state, dmaengine_synchronize() should not be called, otherwise the DMA channel can't be resumed successfully. Fixes: e8343410 ("ALSA: dmaengine: Synchronize dma channel after drop()") Signed-off-by:
-
- 16 Jul, 2024 2 commits
-
-
Curtis Malainey authored
Commit 8efcd486 ("ASoC: Intel: sof_rt5682: use common module for sof_card_private initialization") migrated the pin assignment in the context struct up to soc-acpi-intel-ssp-common.c. This uses a lookup table to see if a device has a amp/codec before assigning the pin. The issue here arises when combination parts that serve both (with 2 ports) are used. sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.3/adl_rt5682_def/SSP0-Codec' CPU: 1 PID: 2079 Comm: udevd Tainted: G U 6.6.36-03391-g744739e00023 #1 3be1a2880a0970f65545a957db7d08ef4b3e2c0d Hardware name: Google Anraggar/Anraggar, BIOS Google_Anraggar.15217.552.0 05/07/2024 Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 sysfs_warn_dup+0x5b/0x70 sysfs_create_dir_ns+0xb0/0x100 kobject_add_internal+0x133/0x3c0 kobject_add+0x66/0xb0 ? device_add+0x65/0x780 device_add+0x164/0x780 snd_soc_add_pcm_runtimes+0x2fa/0x800 snd_soc_bind_card+0x35e/0xc20 devm_snd_soc_register_card+0x48/0x90 platform_probe+0x7b/0xb0 really_probe+0xf7/0x2a0 ... kobject: kobject_add_internal failed for SSP0-Codec with -EEXIST, don't try to register things with the same name in the same directory. The issue is that the ALC5650 was only defined in the codec table and not the amp table which left the pin unassigned but the dai link was still created by the machine driver. Also patch the suffix filename code for the topology to prevent double suffix names as a result of this change. Fixes: 8efcd486 ("ASoC: Intel: sof_rt5682: use common module for sof_card_private initialization") Reviewed-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
-
Pierre-Louis Bossart authored
Multiple users report a regression bisected to commit d5263dbb ("ASoC: SOF: Intel: don't ignore IOC interrupts for non-audio transfers"). The firmware version is the likely suspect, as these users relied on SOF 2.0 while Intel only tested with the 2.2 release. Rather than completely disable the wait_for_completion(), which can help us gather timing information on the different stages of the boot process, the simplest course of action is to just disable it for older IPC versions which are no longer under active development. Closes: https://github.com/thesofproject/linux/issues/5072 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218961 Fixes: d5263dbb ("ASoC: SOF: Intel: don't ignore IOC interrupts for non-audio transfers") Tested-by:
Mike Krinkin <krinkin.m.u@gmail.com> Tested-by:
Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by:
-
- 15 Jul, 2024 5 commits
-
-
Daniel Baluta authored
According to Documentation/devicetree/bindings/dsp/fsl,dsp.yaml fsl,dsp-ctrl is a phandle to syscon block so we need to use correct function to retrieve it. Currently there is no SOF DSP DTS merged into mainline so there is no need to support the old way of retrieving the dsp control node. Fixes: 9ba23717 ("ASoC: SOF: imx8m: Implement DSP start") Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Link: https://patch.msgid.link/20240715151653.114751-1-daniel.baluta@oss.nxp.comSigned-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for for v6.11 There are a lot of changes in here, though the big bulk of things is cleanups and simplifications of various kinds which are internally rather than externally visible. A good chunk of those are DT schema conversions, but there's also a lot of changes in the code. Highlights: - Syncing of features between simple-audio-card and the two audio-graph cards so there is no reason to stick with an older driver. - Support for specifying the order of operations for components within cards to allow quirking for unusual systems. - New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242.
-
Takashi Iwai authored
Instead of the explicit "1 << x", use BIT() macro for one bit values. This will improve the readability and also avoids the possible bad value for 31bit shift. Link: https://patch.msgid.link/20240715123646.26679-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
A malformed USB descriptor may pass the lengthy mixer description with a lot of channels, and this may overflow the 32bit integer shift size, as caught by syzbot UBSAN test. Although this won't cause any real trouble, it's better to address. This patch introduces a sanity check of the number of channels to bail out the parsing when too many channels are found. Reported-by: syzbot+78d5b129a762182225aa@syzkaller.appspotmail.com Closes: https://lore.kernel.org/0000000000000adac5061d3c7355@google.com Link: https://patch.msgid.link/20240715123619.26612-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Pull 6.11 devel branch Signed-off-by:
-
- 14 Jul, 2024 1 commit
-
-
Edson Juliano Drosdeck authored
Positivo SU C1400 is equipped with ALC256, and it needs ALC269_FIXUP_ASPIRE_HEADSET_MIC quirk to make its headset mic work. Signed-off-by:
Edson Juliano Drosdeck <edson.drosdeck@gmail.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240712180642.22564-1-edson.drosdeck@gmail.comSigned-off-by:
-
- 12 Jul, 2024 5 commits
-
-
Mark Brown authored
Merge series from Mohammad Rafi Shaik <quic_mohs@quicinc.com>: This patch set change will fix the unbalanced pm_runtime_enable in wcd937x-sdw soundwire slave. And removed the string compare with widget name in MIC BIAS settings, instead of string compare use the MIC BIAS id's as value. Removed separate handling for vdd-buck regulator supply which is not required. The vdd-buck regulator supply enabled using bulk enable. Added the error handling in wcd937x_probe() and disable the regulators in error case.
-
Shenghao Ding authored
Requriment from customer to add new kcontrol to set tas2563 digital Volume Signed-off-by:
-
Mohammad Rafi Shaik authored
Remove separate handling for vdd-buck regulator supply which is not required. The vdd-buck regulator supply enabled using bulk enable. Add the error handling in wcd937x_probe() and disable the regulators in error case. Reported-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Closes: https://lore.kernel.org/linux-sound/834d31cc-f4bc-4db7-a25b-f9869e550eb6@wanadoo.fr/Signed-off-by:
Mohammad Rafi Shaik <quic_mohs@quicinc.com> Link: https://patch.msgid.link/20240704081723.3394153-4-quic_mohs@quicinc.comSigned-off-by:
-
Mohammad Rafi Shaik authored
Remove the string compare with widget name in MIC BIAS settings, instead of string compare use the MIC BIAS id's. Reported-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Closes: https://lore.kernel.org/linux-sound/ba911ebd-aef5-46af-ace1-84d13bee6876@linaro.org/Signed-off-by:
-
Mohammad Rafi Shaik authored
Fix the unbalanced pm_runtime_enable! in wcd937x-sdw soundwire slave. Fixes: c99a515f ("ASoC: codecs: wcd937x-sdw: add SoundWire driver") Signed-off-by:
-
- 11 Jul, 2024 2 commits
-
-
Animesh Agarwal authored
Convert the Cirrus Logic CS42448/CS42888 audio CODEC bindings to DT schema format. Set power supply properties to required only for CS42888. Cc: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
Animesh Agarwal <animeshagarwal28@gmail.com> Reviewed-by:
Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240710072756.99765-1-animeshagarwal28@gmail.comSigned-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-fix-v6.10-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.10 A few fairly small fixes for ASoC, there's a relatively large set of hardening changes for the cs_dsp firmware file parsing and a couple of other small device specific fixes.
-
- 10 Jul, 2024 2 commits
-
-
Mark Brown authored
Merge series from Rayyan Ansari <rayyan.ansari@linaro.org>: These patches convert the remaining plain text bindings for Qualcomm sound drivers to dt schema, so device trees can be validated against them.
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: Commit series that makes some small improvements to code and the kernel log messages.
-
