This functionality will be needed separately in a subsequent patch, so
split it into it's own exported function.
Signed-off-by: NeilBrown <neilb@suse.de>

When MD_CHANGE_CLEAN is set we might block in md_write_start.
So we should only set it when fairly sure that something will clear
it.

There are two places where it is set so as to encourage a metadata
update to record the progress of resync/recovery.  This should only
be done if the internal metadata update mechanisms are in use, which
can be tested by by inspecting '->persistent'.
Signed-off-by: NeilBrown <neilb@suse.de>

We will shortly allow md devices with no gendisk (they are attached to
a dm-target instead).  That will cause mdname() to return 'mdX'.
There is one place where mdname really needs to be unique: when
creating the name for a slab cache.
So in that case, if there is no gendisk, you the address of the mddev
formatted in HEX to provide a unique name.
Signed-off-by: NeilBrown <neilb@suse.de>

Separate the actual 'change' code from the sysfs interface
so that it can eventually be called internally.
Signed-off-by: NeilBrown <neilb@suse.de>

We will want md devices to live as dm targets where sysfs is not
visible.  So allow md to not connect to sysfs.
Signed-off-by: NeilBrown <neilb@suse.de>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pci, mrst: Add extra sanity check in walking the PCI extended cap chain
  x86: Fix x2apic preenabled system with kexec
  x86: Force HPET readback_cmp for all ATI chipsets

* 'kmemleak' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm:
  kmemleak: Add support for NO_BOOTMEM configurations
  kmemleak: Annotate false positive in init_section_page_cgroup()

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cio: fix potential overflow in chpid descriptor
  [S390] add missing device put
  [S390] dasd: use correct label location for diag fba disks

- fix reversing of command/sub arguments
- fix a crash if the i2c interface is called before the device is found
Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With commits 08677214 and 59be5a8e, alloc_bootmem()/free_bootmem() and
friends use the early_res functions for memory management when
NO_BOOTMEM is enabled. This patch adds the kmemleak calls in the
corresponding code paths for bootmem allocations.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: stable@kernel.org

The pointer to the page_cgroup table allocated in
init_section_page_cgroup() is stored in section->page_cgroup as (base -
pfn). Since this value does not point to the beginning or inside the
allocated memory block, kmemleak reports a false positive.

This was reported in bugzilla.kernel.org as #16297.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Adrien Dessemond <adrien.dessemond@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>

The length filed in the chsc response block (if valid)
has a value of n*(sizeof(chp_desc))+8 (for the response
block header). When we memcopied from the response block
to the actual descriptor we copied 8 bytes too much.
The bug was not revealed since the descriptor is embedded
in struct channel_path.
Since we only write one descriptor at a time ignore the
length value and use sizeof(*desc).
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The dasd_alias_show function does not return a device reference
in case the device is an alias.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Partition boundary calculation fails for DASD FBA disks under the
following conditions:
- disk is formatted with CMS FORMAT with a blocksize of more than
  512 bytes
- all of the disk is reserved to a single CMS file using CMS RESERVE
- the disk is accessed using the DIAG mode of the DASD driver

Under these circumstances, the partition detection code tries to
read the CMS label block containing partition-relevant information
from logical block offset 1, while it is in fact located at physical
block offset 1.

Fix this problem by using the correct CMS label block location
depending on the device type as determined by the DASD SENSE ID
information.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

* 'x86/kprobes' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  x86: kprobes: fix swapped segment registers in kretprobe

In commit f007ea26, the order of the %es and %ds segment registers
got accidentally swapped, so synthesized 'struct pt_regs' frames
have the two values inverted.  It's almost sure that these values
never matter, and that they also never differ.  But wrong is wrong.
Signed-off-by: Roland McGrath <roland@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: fall back to original BIOS BAR addresses

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Silence gcc warning in ocfs2_write_zero_page().
  jbd2/ocfs2: Fix block checksumming when a buffer is used in several transactions
  ocfs2/dlm: Remove BUG_ON from migration in the rare case of a down node
  ocfs2: Don't duplicate pages past i_size during CoW.
  ocfs2: tighten up strlen() checking
  ocfs2: Make xattr reflink work with new local alloc reservation.
  ocfs2: make xattr extension work with new local alloc reservation.
  ocfs2: Remove the redundant cpu_to_le64.
  ocfs2/dlm: don't access beyond bitmap size
  ocfs2: No need to zero pages past i_size.
  ocfs2: Zero the tail cluster when extending past i_size.
  ocfs2: When zero extending, do it by page.
  ocfs2: Limit default local alloc size within bitmap range.
  ocfs2: Move orphan scan work to ocfs2_wq.
  fs/ocfs2/dlm: Add missing spin_unlock

The hibernate issues that got fixed in commit 985b823b ("drm/i915:
fix hibernation since i915 self-reclaim fixes") turn out to have been
incomplete.  Vefa Bicakci tested lots of hibernate cycles, and without
the __GFP_RECLAIMABLE flag the system eventually fails to resume.

With the flag added, Vefa can apparently hibernate forever (or until he
gets bored running his automated scripts, whichever comes first).

The reclaimable flag was there originally, and was one of the flags that
were dropped (unintentionally) by commit 4bdadb97 ("drm/i915:
Selectively enable self-reclaim") that introduced all these problems,
but I didn't want to just blindly add back all the flags in commit
985b823b, and it looked like __GFP_RECLAIM wasn't necessary.  It
clearly was.

I still suspect that there is some subtle reason we're missing that
causes the problems, but __GFP_RECLAIMABLE is certainly not wrong to use
in this context, and is what the code historically used.  And we have no
idea what the causes the corruption without it.
Reported-and-tested-by: M. Vefa Bicakci <bicave@superonline.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The fixed bar capability structure is searched in PCI extended
configuration space.  We need to make sure there is a valid capability
ID to begin with otherwise, the search code may stuck in a infinite
loop which results in boot hang.  This patch adds additional check for
cap ID 0, which is also invalid, and indicates end of chain.

End of chain is supposed to have all fields zero, but that doesn't
seem to always be the case in the field.
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <1279306706-27087-1-git-send-email-jacob.jun.pan@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Found one x2apic system kexec loop test failed
when CONFIG_NMI_WATCHDOG=y (old) or CONFIG_LOCKUP_DETECTOR=y (current tip)

first kernel can kexec second kernel, but second kernel can not kexec third one.

it can be duplicated on another system with BIOS preenabled x2apic.
First kernel can not kexec second kernel.

It turns out, when kernel boot with pre-enabled x2apic, it will not execute
disable_local_APIC on shutdown path.

when init_apic_mappings() is called in setup_arch, it will skip setting of
apic_phys when x2apic_mode is set. ( x2apic_mode is much early check_x2apic())
Then later, disable_local_APIC() will bail out early because !apic_phys.

So check !x2apic_mode in x2apic_mode in disable_local_APIC with !apic_phys.

another solution could be updating init_apic_mappings() to set apic_phys even
for preenabled x2apic system. Actually even for x2apic system, that lapic
address is mapped already in early stage.

BTW: is there any x2apic preenabled system with apicid of boot cpu > 255?
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4C3EB22B.3000701@kernel.org>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: stable@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

ocfs2_write_zero_page() has a loop that won't ever be skipped, but gcc
doesn't know that.  Set ret=0 just to make gcc happy.
Signed-off-by: Joel Becker <joel.becker@oracle.com>

If we fail to assign resources to a PCI BAR, this patch makes us try the
original address from BIOS rather than leaving it disabled.

Linux tries to make sure all PCI device BARs are inside the upstream
PCI host bridge or P2P bridge apertures, reassigning BARs if necessary.
Windows does similar reassignment.

Before this patch, if we could not move a BAR into an aperture, we left
the resource unassigned, i.e., at address zero.  Windows leaves such BARs
at the original BIOS addresses, and this patch makes Linux do the same.

This is a bit ugly because we disable the resource long before we try to
reassign it, so we have to keep track of the BIOS BAR address somewhere.
For lack of a better place, I put it in the struct pci_dev.

I think it would be cleaner to attempt the assignment immediately when the
claim fails, so we could easily remember the original address.  But we
currently claim motherboard resources in the middle, after attempting to
claim PCI resources and before assigning new PCI resources, and changing
that is a fairly big job.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16263Reported-by: Andrew <nitr0@seti.kr.ua>
Tested-by: Andrew <nitr0@seti.kr.ua>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Add alignment to syscall metadata declarations
  perf: Sync callchains with period based hits
  perf: Resurrect flat callchains
  perf: Version String fix, for fallback if not from git
  perf: Version String fix, using kernel version

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: rename causes kernel Oops
  GFS2: BUG in gfs2_adjust_quota
  GFS2: Fix kernel NULL pointer dereference by dlm_astd
  GFS2: recovery stuck on transaction lock
  GFS2: O_TRUNC not working on stuffed files across cluster

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: w90p910_ts - fix call to setup_timer()
  Input: synaptics - fix wrong dimensions check
  Input: i8042 - mark stubs in i8042.h "static inline"

No need to take address, w90p910_ts is already a pointer.
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: skcipher - avoid NULL dereference

OCFS2 uses t_commit trigger to compute and store checksum of the just
committed blocks. When a buffer has b_frozen_data, checksum is computed
for it instead of b_data but this can result in an old checksum being
written to the filesystem in the following scenario:

1) transaction1 is opened
2) handle1 is opened
3) journal_access(handle1, bh)
    - This sets jh->b_transaction to transaction1
4) modify(bh)
5) journal_dirty(handle1, bh)
6) handle1 is closed
7) start committing transaction1, opening transaction2
8) handle2 is opened
9) journal_access(handle2, bh)
    - This copies off b_frozen_data to make it safe for transaction1 to commit.
      jh->b_next_transaction is set to transaction2.
10) jbd2_journal_write_metadata() checksums b_frozen_data
11) the journal correctly writes b_frozen_data to the disk journal
12) handle2 is closed
    - There was no dirty call for the bh on handle2, so it is never queued for
      any more journal operation
13) Checkpointing finally happens, and it just spools the bh via normal buffer
writeback.  This will write b_data, which was never triggered on and thus
contains a wrong (old) checksum.

This patch fixes the problem by calling the trigger at the moment data is
frozen for journal commit - i.e., either when b_frozen_data is created by
do_get_write_access or just before we write a buffer to the log if
b_frozen_data does not exist. We also rename the trigger to t_frozen as
that better describes when it is called.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

For migration, we are waiting for DLM_LOCK_RES_MIGRATING flag to be set
before sending DLM_MIG_LOCKRES_MSG message to the target. We are using
dlm_migration_can_proceed() for that purpose.  However, if the node is
down, dlm_migration_can_proceed() will also return "go ahead".  In this
rare case, the DLM_LOCK_RES_MIGRATING flag might not be set yet. Remove
the BUG_ON() that trips over this condition.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

During CoW, the pages after i_size don't contain valid data, so there's
no need to read and duplicate them.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

commit 30a564be (x86, hpet: Restrict read back to affected ATI
chipset) restricted the workaround for the HPET bug to SMX00
chipsets. This was reasonable as those were the only ones against
which we ever got a bug report.

Stephan Wolf reported now that this patch breaks his IXP400 based
machine. Though it's confirmed to work on other IXP400 based systems.

To error out on the safe side, we force the HPET readback workaround
for all ATI SMbus class chipsets.
Reported-by: Stephan Wolf <stephan@letzte-bankreihe.de>
LKML-Reference: <alpine.LFD.2.00.1007142134140.3321@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Stephan Wolf <stephan@letzte-bankreihe.de>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>

This patch fixes a kernel Oops in the GFS2 rename code.

The problem was in the way the gfs2 directory code was trying
to re-use sentinel directory entries.

In the failing case, gfs2's rename function was renaming a
file to another name that had the same non-trivial length.
The file being renamed happened to be the first directory
entry on the leaf block.

First, the rename code (gfs2_rename in ops_inode.c) found the
original directory entry and decided it could do its job by
simply replacing the directory entry with another.  Therefore
it determined correctly that no block allocations were needed.

Next, the rename code deleted the old directory entry prior to
replacing it with the new name.  Therefore, the soon-to-be
replaced directory entry was temporarily made into a directory
entry "sentinel" or a place holder at the start of a leaf block.

Lastly, it went to re-add the replacement directory entry in
that leaf block.  However, when gfs2_dirent_find_space was
looking for space in the leaf block, it used the wrong value
for the sentinel.  That threw off its calculations so later
it decides it can't really re-use the sentinel and therefore
must allocate a new leaf block.  But because it previously decided
to re-use the directory entry, it didn't waste the time to
grab a new block allocation for the inode.  Therefore, the
inode's i_alloc pointer was still NULL and it crashes trying to
reference it.

In the case of sentinel directory entries, the entire dirent is
reused, not just the "free space" portion of it, and therefore
the function gfs2_dirent_find_space should use the value 0
rather than GFS2_DIRENT_SIZE(0) for the actual dirent size.

Fixing this calculation enables the reproducer programs to work
properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

HighMem pages on i686 do not get mapped to the buffer_heads and this was
causing a NULL pointer dereference when we were trying to memset page buffers
to zero.
We now use zero_user() that kmaps the page and directly manipulates page data.
This patch also fixes a boundary condition that was incorrect.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This patch fixes a problem in an error path when looking
up dinodes.  There are two sister-functions, gfs2_inode_lookup
and gfs2_process_unlinked_inode.  Both functions acquire and
hold the i_iopen glock for the dinode being looked up. The last
thing they try to do is hold the i_gl glock for the dinode.
If that glock fails for some reason, the error path was
incorrectly calling gfs2_glock_put for the i_iopen glock twice.
This resulted in the glock being prematurely freed.  The
"minimum hold time" usually kept the glock in memory, but the
lock interface to dlm (aka lock_dlm) freed its memory for the
glock.  In some circumstances, it would cause dlm's dlm_astd daemon
to try to call the bast function for the freed lock_dlm memory,
which resulted in a NULL pointer dereference.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This patch fixes bugzilla bug #590878: GFS2: recovery stuck on
transaction lock.  We set the frozen flag on the glock when we receive
a completion that cannot be delivered due to blocked locks. At that
point we check to see whether the first waiting holder has the noexp
flag set. If the noexp lock is queued later, then we need to unfreeze
the glock at that point in time, namely, in the glock work function.

This patch was originally written by Steve Whitehouse, but since
he's on holiday, I'm submitting it.  It's been well tested with a
complex recovery test called revolver.
Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

This patch replaces a statement that got dropped out by accident.
Without the patch, truncates on stuffed (very small) files cause
those files to have an unpredictable size.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6226/1: fix kprobe bug in ldr instruction emulation
  ARM: Update mach-types
  ARM: lockdep: fix unannotated irqs-on
  ARM: 6184/2: ux500: use neutral PRCMU base
  ARM: 6212/1: atomic ops: add memory constraints to inline asm
  ARM: 6211/1: atomic ops: fix register constraints for atomic64_add_unless
  ARM: 6210/1: Do not rely on reset defaults of L2X0_AUX_CTRL

* 'lmb-to-memblock' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  lmb: rename to memblock

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/fsl-booke: Fix address issue when using relocatable kernels
  powerpc/cpm1: Mark micropatch code/data static and __init
  powerpc/cpm1: Fix build with various CONFIG_*_UCODE_PATCH combinations
  powerpc/cpm: Reintroduce global spi_pram struct (fixes build issue)