- 15 Apr, 2023 16 commits
-
-
Niklas Söderlund authored
Document support for the VIN module in the Renesas V4H (r8a779g0) SoC. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Niklas Söderlund authored
Document support for the CSI-2 module in the Renesas V4H (r8a779g0) SoC. Signed-off-by:
-
Niklas Söderlund authored
Document support for the ISP module in the Renesas V4H (r8a779g0) SoC. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Hans Verkuil authored
The CEC pin framework is affected by NTP daemons speeding up or slowing down the system clock. Document this and explain how to fix this for chronyd. Signed-off-by:
-
Hans Verkuil authored
The valid_la boolean is used to check if the destination logical address is either 15 (broadcast) or our logical address. If it is for another logical address, then only adapters that have the CEC_CAP_MONITOR_ALL capability can pass it on. However, it is also used to do more detailed validity checks, such as whether the message was broadcast when it should have been directed, or vice versa, in which case the message must be ignored according to the spec. But that should not apply to monitoring. Add a new bool that just checks the LA and nothing else. Signed-off-by:
-
- 13 Apr, 2023 1 commit
-
-
Benjamin Gaignard authored
ctx->vpu_dst_fmt is no more initialized before calling hantro_try_fmt() so assigne it to vpu_fmt led to crash the kernel. Like for decoder case use 'fmt' as format for encoder and clean up the code. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@collabora.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: db6f68b5 ("media: verisilicon: Do not set context src/dst formats in reset functions") Signed-off-by:
-
- 12 Apr, 2023 13 commits
-
-
Laurent Pinchart authored
Structures passed to subdev pad operations are all zero-initialized when declaring variables. In most cases, this is done with designated initializers to initialize some of the fields to specific values, but in a minority of cases the structures are zero-initialized by assigning them to '{ 0 }' or '{ }'. Improve coding style consistency by using designated initializers where possible, always initializing the 'which' field. Signed-off-by:Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Structures passed to subdev pad operations are all zero-initialized, but not always with the same kind of code constructs. While most drivers used designated initializers, which zero all the fields that are not specified, when declaring variables, some use memset(). Those two methods lead to the same end result, and, depending on compiler optimizations, may even be completely equivalent, but they're not consistent. Improve coding style consistency by using designated initializers instead of calling memset(). Where applicable, also move the variables to inner scopes of for loops to ensure correct initialization in all iterations. Signed-off-by:
-
Laurent Pinchart authored
Several drivers call subdev pad operations, passing structures that are not fully zeroed. While the drivers initialize the fields they care about explicitly, this results in reserved fields having uninitialized values. Future kernel API changes that make use of those fields thus risk breaking proper driver operation in ways that could be hard to detect. To avoid this, make the code more robust by zero-initializing all the structures passed to subdev pad operation. Maintain a consistent coding style by preferring designated initializers (which zero-initialize all the fields that are not specified) over memset() where possible, and make variable declarations local to inner scopes where applicable. One notable exception to this rule is in the ipu3 driver, where a memset() is needed as the structure is not a local variable but a function parameter provided by the caller. Not all fields of those structures can be initialized when declaring the variables, as the values for those fields are computed later in the code. Initialize the 'which' field in all cases, and other fields when the variable declaration is so close to the v4l2_subdev_call() call that it keeps all the context easily visible when reading the code, to avoid hindering readability. Signed-off-by:
-
Laurent Pinchart authored
Variable initialization code in notify_src_chg() is incorrectly indented. Fix it. Signed-off-by:
-
Laurent Pinchart authored
Commit 0d346d2a ("media: v4l2-subdev: add subdev-wide state struct") applied a large media tree-wide change produced by coccinelle. It was so large that a set of identical indentation issues went unnoticed during review. Fix them. While at it, and because it's easy to review both changes together, add a trailing comma for the last (and only) struct member initialization of the related structures, to avoid future changes should new fields need to be initialized. Fixes: 0d346d2a ("media: v4l2-subdev: add subdev-wide state struct") Signed-off-by:
-
Fritz Koenig authored
According to msm_media_info.h the correct alignment for the stride of P010 buffers is 128. Signed-off-by:
Fritz Koenig <frkoenig@chromium.org> Reviewed-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by:
-
Dikshita Agarwal authored
Add handling for below commands in encoder: 1. V4L2_ENC_CMD_STOP 2. V4L2_ENC_CMD_START Signed-off-by:
Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by:
-
Viswanath Boma authored
Currently QP range set from client is not communicated to video firmware. Add support for the QP range HFI to set the same to firmware. Signed-off-by:
Viswanath Boma <quic_vboma@quicinc.com> Signed-off-by:
-
Javier Martinez Canillas authored
Commit 9593126d ("media: venus: Add a handling of QC08C compressed format") and commit cef92b14 ("media: venus: Add a handling of QC10C compressed format") added support for the QC08C and QC10C compressed formats respectively. But these also caused a regression, because the new formats where added at the beginning of the vdec_formats[] array and the vdec_inst_init() function sets the default format output and capture using fixed indexes of that array: static void vdec_inst_init(struct venus_inst *inst) { ... inst->fmt_out = &vdec_formats[8]; inst->fmt_cap = &vdec_formats[0]; ... } Since now V4L2_PIX_FMT_NV12 is not the first entry in the array anymore, the default capture format is not set to that as it was done before. Both commits changed the first index to keep inst->fmt_out default format set to V4L2_PIX_FMT_H264, but did not update the latter to keep .fmt_out default format set to V4L2_PIX_FMT_NV12. Rather than updating the index to the current V4L2_PIX_FMT_NV12 position, let's reorder the entries so that this format is the first entry again. This would also make VIDIOC_ENUM_FMT report the V4L2_PIX_FMT_NV12 format with an index 0 as it did before the QC08C and QC10C formats were added. Fixes: 9593126d ("media: venus: Add a handling of QC08C compressed format") Fixes: cef92b14 ("media: venus: Add a handling of QC10C compressed format") Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
-
Viswanath Boma authored
Aligned the mismatch of persist1 and scratch1 buffer calculation, as per the firmware requirements. Signed-off-by:
Vikash Garodia <vgarodia@qti.qualcomm.com> Signed-off-by:
Nathan Hebert <nhebert@chromium.org> Signed-off-by:
-
Michał Krawczyk authored
The decoder driver should clear the last_buffer_dequeued flag of the capture queue upon receiving V4L2_DEC_CMD_START. The last_buffer_dequeued flag is set upon receiving EOS (which always happens upon receiving V4L2_DEC_CMD_STOP). Without this patch, after issuing the V4L2_DEC_CMD_STOP and V4L2_DEC_CMD_START, the vb2_dqbuf() function will always fail, even if the buffers are completed by the hardware. Fixes: beac8290 ("media: venus: make decoder compliant with stateful codec API") Signed-off-by:
Michał Krawczyk <mk@semihalf.com> Signed-off-by:
-
Florian Fainelli authored
The driver was intended from the start to be a wake-up source for the system, however due to the absence of a suitable call to device_set_wakeup_capable(), the device_may_wakeup() call used to decide whether to enable the GPIO interrupt as a wake-up source would never happen. Lookup the DT standard "wakeup-source" property and call device_init_wakeup() to ensure the device is flagged as being wakeup capable. Reported-by:
Matthew Lear <matthew.lear@broadcom.com> Fixes: fd0f6851 ("[media] rc: Add support for GPIO based IR Receiver driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Florian Fainelli authored
The GPIO IR receiver can be used as a wake-up source for the system, document that. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
- 11 Apr, 2023 10 commits
-
-
Alexander Stein authored
Also dev_err_probe message require a trailing \n. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
-
Sakari Ailus authored
Document the firmware file names for CCS static data for CCS, SMIA++ and SMIA devices. Signed-off-by:
-
Sakari Ailus authored
MIPI CCS uses a 16-bit MIPI manufacturer identifier for firmware filenames compared to older 8-bit identifier used by SMIA. The requested firmware files used the MIPI manufacturer ID even for SMIA compliant devices, effectively making the manufacturer ID 0. While CCS static data is a feature of CCS 1.1, it has no hardware dependencies. Making this feature available for SMIA devices helps adding support for them and avoids requesting ill-generated CCS static data file names. The files are named as: ccs/smiapp-module-vv-mmmm-rrrr.fw, ccs/smiapp-sensor-vv-mmmm-rr.fw and ccs/smia-sensor-vv-mmmm-rr.fw where vv is the manufacturer ID, mmmm is the model ID and rr or rrrr is the revision number. Signed-off-by:
-
Sakari Ailus authored
Some modules don't have any model identification information in the register address space. The driver as a SMIA++ driver attempted to use sensor information in this case. This workaround is definitely not for CCS devices. Signed-off-by:
-
Sakari Ailus authored
Read 16-bit sensor revision number if the 8-bit register has value 0. Signed-off-by:
-
Sakari Ailus authored
Add V4L2 controls (currently CAMERA_SENSOR_ROTATION and CAMERA_SENSOR_ORIENTATION) from properties. Signed-off-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
No longer mirror flipping controls if the sensor is mounted upside down. This way the behaviour of the flipping controls and rotation of the sensor are aligned with the rest of the drivers. Signed-off-by:
-
Jacopo Mondi authored
The "rotation" fwnode device property is intended to allow specify the sensor's physical mounting rotation, so that it can be exposed through the read-only V4L2_CID_CAMERA_SENSOR_ROTATION control and applications can decide how to compensate for that. The imx258 driver has read-only VFLIP and HFLIP enabled, resulting in a 180 degrees image rotation being produced by the sensor. But this doesn't imply that the physical mounting rotation should match the driver's implementation. Now that the driver registers V4L2_CID_CAMERA_SENSOR_ROTATION and V4L2_CID_HFLIP/VFLIP correctly, userspace has all the required information to handle the rotation correctly, hence it is not necessary to require the 'rotation' property to be fixed to 180 degrees in DTS. Signed-off-by:
-
Jacopo Mondi authored
Register controls for V4L2_CID_HFLIP and V4L2_CID_VFLIP. The controls are registered as read-only and enabled by default, as the driver embeds a 180 degrees rotation in its programming sequences and only supports that mode of operations. Signed-off-by:
-
Sakari Ailus authored
Dongchun's e-mail mailbox is no longer available, assign the maintainership to myself. The following message to <dongchun.zhu@mediatek.com> was undeliverable. The reason for the problem: 5.1.0 - Unknown address error 550-'Relaying mail to dongchun.zhu@mediatek.com is not allowed' Signed-off-by:
-
