- 08 Apr, 2016 3 commits
-
-
Alexei Starovoitov authored
now all calls to perf_trace_buf_submit() pass 0 as 4th argument which will be repurposed in the next patch which will change the meaning of 1st arg of perf_tp_event() to event_type Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
avoid memset in perf_fetch_caller_regs, since it's the critical path of all tracepoints. It's called from perf_sw_event_sched, perf_event_task_sched_in and all of perf_trace_##call with this_cpu_ptr(&__perf_regs[..]) which are zero initialized by perpcu init logic and subsequent call to perf_arch_fetch_caller_regs initializes the same fields on all archs, so we can safely drop memset from all of the above cases and move it into perf_ftrace_function_call that calls it with stack allocated pt_regs. Acked-by:
-
David S. Miller authored
Needs to be protected with CONFIG_LOCKDEP. Based upon a patch by Hannes Frederic Sowa. Signed-off-by:
-
- 07 Apr, 2016 36 commits
-
-
Hannes Frederic Sowa authored
I forgot to add inline to lockdep_sock_is_held, so it generated all kinds of build warnings if not build with lockdep support. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
David S. Miller authored
Jon Maloy says: ==================== tipc: some small fixes When fix a minor buffer leak, and ensure that bearers filter packets correctly while they are being shut down. v2: Corrected typos in commit #3, as per feedback from S. Shtylyov v3: Removed commit #3 from the series. Improved version will be re-submitted later. ==================== Signed-off-by: -
Jon Paul Maloy authored
Resetting a bearer/interface, with the consequence of resetting all its pertaining links, is not an atomic action. This becomes particularly evident in very large clusters, where a lot of traffic may happen on the remaining links while we are busy shutting them down. In extreme cases, we may even see links being re-created and re-established before we are finished with the job. To solve this, we now introduce a solution where we temporarily detach the bearer from the interface when the bearer is reset. This inhibits all packet reception, while sending still is possible. For the latter, we use the fact that the device's user pointer now is zero to filter out which packets can be sent during this situation; i.e., outgoing RESET messages only. This filtering serves to speed up the neighbors' detection of the loss event, and saves us from unnecessary probing. Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Paul Maloy authored
When enabling a bearer we create a 'neigbor discoverer' instance by calling the function tipc_disc_create() before the bearer is actually registered in the list of enabled bearers. Because of this, the very first discovery broadcast message, created by the mentioned function, is lost, since it cannot find any valid bearer to use. Furthermore, the used send function, tipc_bearer_xmit_skb() does not free the given buffer when it cannot find a bearer, resulting in the leak of exactly one send buffer each time a bearer is enabled. This commit fixes this problem by introducing two changes: 1) Instead of attemting to send the discovery message directly, we let tipc_disc_create() return the discovery buffer to the calling function, tipc_enable_bearer(), so that the latter can send it when the enabling sequence is finished. 2) In tipc_bearer_xmit_skb(), as well as in the two other transmit functions at the bearer layer, we now free the indicated buffer or buffer chain when a valid bearer cannot be found. Acked-by:
-
David S. Miller authored
Tom Herbert says: ==================== udp: GRO in UDP sockets This patch set adds GRO functions (gro_receive and gro_complete) to UDP sockets and removes udp_offload infrastructure. Add GRO functions (gro_receive and gro_complete) to UDP sockets. In udp_gro_receive and udp_gro_complete a socket lookup is done instead of looking up the port number in udp_offloads. If a socket is found and there are GRO functions for it then those are called. This feature allows binding GRO functions to more than just a port number. Eventually, we will be able to use this technique to allow application defined GRO for an application protocol by attaching BPF porgrams to UDP sockets for doing GRO. In order to implement these functions, we added exported udp6_lib_lookup_skb and udp4_lib_lookup_skb functions in ipv4/udp.c and ipv6/udp.c. Also, inet_iif and references to skb_dst() were changed to check that dst is set in skbuf before derefencing. In the GRO path there is now a UDP socket lookup performed before dst is set, to the get the device in that case we simply use skb->dev. Tested: Ran various combinations of VXLAN and GUE TCP_STREAM and TCP_RR tests. Did not see any material regression. ==================== Signed-off-by: -
Tom Herbert authored
Now that the UDP encapsulation GRO functions have been moved to the UDP socket we not longer need the udp_offload insfrastructure so removing it. Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Tom Herbert authored
Adapt geneve_gro_receive, geneve_gro_complete to take a socket argument. Set these functions in tunnel_config. Don't set udp_offloads any more. Signed-off-by:
-
Tom Herbert authored
Adapt gue_gro_receive, gue_gro_complete to take a socket argument. Don't set udp_offloads any more. Signed-off-by:
-
Tom Herbert authored
Adapt vxlan_gro_receive, vxlan_gro_complete to take a socket argument. Set these functions in tunnel_config. Don't set udp_offloads any more. Signed-off-by:
-
Tom Herbert authored
Add gro_receive and gro_complete to struct udp_tunnel_sock_cfg. Signed-off-by:
-
Tom Herbert authored
This patch adds GRO functions (gro_receive and gro_complete) to UDP sockets. udp_gro_receive is changed to perform socket lookup on a packet. If a socket is found the related GRO functions are called. This features obsoletes using UDP offload infrastructure for GRO (udp_offload). This has the advantage of not being limited to provide offload on a per port basis, GRO is now applied to whatever individual UDP sockets are bound to. This also allows the possbility of "application defined GRO"-- that is we can attach something like a BPF program to a UDP socket to perfrom GRO on an application layer protocol. Signed-off-by:
-
Tom Herbert authored
Add externally visible functions to lookup a UDP socket by skb. This will be used for GRO in UDP sockets. These functions also check if skb->dst is set, and if it is not skb->dev is used to get dev_net. This allows calling lookup functions before dst has been set on the skbuff. Signed-off-by:
-
Tom Herbert authored
In inet_iif check if skb_rtable is NULL for the skb and return skb->skb_iif if it is. This change allows inet_iif to be called before the dst information has been set in the skb (e.g. when doing socket based UDP GRO). Signed-off-by:
-
David S. Miller authored
Hannes Frederic Sowa says: ==================== sock: lockdep tightening First patch is from Eric Dumazet and improves lockdep accuracy for socket locks. After that, second patch introduces lockdep_sock_is_held and uses it. Final patch reverts and reworks the lockdep fix from Daniel in the filter code, as we now have tighter lockdep support. ==================== Signed-off-by: -
Hannes Frederic Sowa authored
This reverts commit 5a5abb1f ("tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter") and replaces it to use lock_sock around sk_{attach,detach}_filter. The checks inside filter.c are updated with lockdep_sock_is_held to check for proper socket locks. It keeps the code cleaner by ensuring that only one lock governs the socket filter instead of two independent locks. Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Hannes Frederic Sowa authored
The socket is either locked if we hold the slock spin_lock for lock_sock_fast and unlock_sock_fast or we own the lock (sk_lock.owned != 0). Check for this and at the same time improve that the current thread/cpu is really holding the lock. Signed-off-by:
-
Hannes Frederic Sowa authored
During release_sock we use callbacks to finish the processing of outstanding skbs on the socket. We actually are still locked, sk_locked.owned == 1, but we already told lockdep that the mutex is released. This could lead to false positives in lockdep for lockdep_sock_is_held (we don't hold the slock spinlock during processing the outstanding skbs). I took over this patch from Eric Dumazet and tested it. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Eric Dumazet authored
David Ahern reported panics in __inet_hash() caused by my recent commit. The reason is inet_reuseport_add_sock() was still using sk_nulls_for_each_rcu() instead of sk_for_each_rcu(). SO_REUSEPORT enabled listeners were causing an instant crash. While chasing this bug, I found that I forgot to clear SOCK_RCU_FREE flag, as it is inherited from the parent at clone time. Fixes: 3b24d854 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
David Ahern <dsa@cumulusnetworks.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2016-04-06 This series contains updates to e1000, e1000e, igb and Kconfig. Alex fixes igb where we were casting the MAC address as __beXX and then passing it into le32_to_cpu, when we could simply cast as __lexx to maintain consistency since it is already little endian. Then enabled bulk free in transmit cleanup for igb. John Holland enables igb to pickup the MAC address from a device tree blob when CONFIG_OF has been enabled. Doron Shikmoni fixes a bug in the output of "ethtool -m ethX" where the data byte appeared duplicated. Stefan fixes up e1000 and e1000e ethtool offline tests which were calling dev_close() which causes IFF_UP to be cleared which removes teh interface routes and some addresses, so use ndo_stop() instead. Jiri Benc cleans up some old links in the Kconfig for Intel drivers where we referred to a URL which is no longer valid. I am so glad Jiri has the time in his day to spend clicking on and testing all the URL links in the the kernel. Arika Chen reverts the addition of a 'rtnl_unlock()' which had a unmatched 'rtnl_lock()' call before it. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-04-06 This series contains updates to i40e and i40evf. Deepthi adds a debug message to display the MSIx vector count for hardware capabilities. Shannon removed the setting of debug_mask at startup to take care of an issue where all the device capabilities getting printed when we had not asked for it. Moved the NVM status out of the admin queue structure, since it should really stay with the other NVM data structures. Akeem added the flush routine to the end of the reset flow to avoid problems in the pass-through routines. Jesse moves a local variable deeper into the depths of the driver where the light is low and the context is great. Then cleaned up the tx_ring argument since it was not making good arguments. Improved performance by not "checking for FCoE" by re-ordering the FCoE checks. Anjali adds the support for changing a VF from non-trusted to trusted and vice-versa. Mitch adds opcodes and structures to support RSS configuration by PF driver on behalf of the VF driver. Fixed how the VLAN feature flags are set. Kiran added defines for RSS, flow director, flexible payload and IPv6. ==================== Signed-off-by: -
Arika Chen authored
This reverts commit 3eb14ea8 ("igb: Fix a deadlock in igb_sriov_reinit") It is the same as commit f468adc9 ("igb: missing rtnl_unlock in igb_sriov_reinit()") There is no rtnl_lock() in igb_resume before, rtnl_unlock will cause a deadlock. Signed-off-by:
Arika Chen <arika.chen@huawei.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jiri Benc authored
The Kconfig for Intel NICs references two different URLs for the "Adapter & Driver ID Guide". Neither of those two links works. The current URL seems to be http://www.intel.com/content/www/us/en/support/network-and-i-o/ethernet-products/000005584.html but given it's apparently constantly changing, there's no point in having it in the help text. Just keep a generic pointer to http://support.intel.com. Hopefully, this one will have a longer live. It still works, at least. Furthermore, remove a link to "the latest Intel PRO/100 network driver for Linux", this has no place in the mainline kernel and the latest Linux driver it offers is from 2006, anyway. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Tested-by:
-
Mitch Williams authored
Correctly set the VLAN feature flags after setting the rest of the netdev flags. And don't set them in hw_features, because these can't be controlled by the VF driver. Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Harshitha Ramamurthy authored
Signed-off-by:
Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by:
-
Kiran Patil authored
Add defines for input set mask (RSS, flow director, flexible payload), including defines specific to IPv6. Change-ID: Ie95ef7d0916a4d6ca011c194283f959774c8dce9 Signed-off-by:
Kiran Patil <kiran.patil@intel.com> Tested-by:
-
Shannon Nelson authored
The logic that checks AQ events for NVM done events is better kept in nvm.c with the rest of the nvmupdate handling code. Change-ID: I2ea58980df8ecaa3726b28a37bff3dfcb8df03dc Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Mitch Williams authored
Add opcodes and structures to support RSS configuration by PF driver on behalf of the VF drivers. This reduces complexity in the VF driver and allows us to support future hardware designs without modifying the VF driver. Change-ID: I8c75765c630eacb71f95967f1109a198542593ac Signed-off-by:
-
Shannon Nelson authored
The NVM update status info should stay collected together, not spread across different structs. Change-ID: Ic16f9e9fd79945d865bb7226184c889884585025 Signed-off-by:
-
Shannon Nelson authored
The VFs can request their queues to be set up into polling mode, rather than interrupt mode, which works well for supporting things like DPDK, but this should not be available when working in an multi-function support device. Change-ID: Id36792e4e7422db8f2033336507211f68f14ff6f Signed-off-by:
-
Anjali Singhai Jain authored
This patch adds hook to support changing a VF from not-trusted to trusted and vice-versa. Fixed the wrappers and function prototype. Changed the dmesg to reflex the current state better. This patch also disables turning on/off trusted VF in MFP mode. Change-ID: Ibcd910935c01f0be1f3fdd6d427230291ee92ebe Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
-
Jesse Brandeburg authored
As it turns out, calling into other files from hot path hurts performance a lot. In this case the majority of the time we call "check FCoE" and the packet is *not* FCoE, but this call was taking 5% of our total cycles spent on receive. Change-ID: I080552c26e7060bc7b78504dc2763f6f0b3d8c76 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Jesse Brandeburg authored
Some of the tx_ring arguments can be deleted since they are not used. Change-ID: I99275b0f191d7f63ec2f05061919904940c36f31 Signed-off-by:
-
Jesse Brandeburg authored
A local variable could move down inside the context where it is used. Change-ID: I9caba9e1eacf921037077f2665cbce83fd8e95d6 Signed-off-by:
-
Akeem G Abodunrin authored
This patch moves the HW flush routine to the end of the reset flow, after the completion of writing to the device VFLR registers- the benefit is to avoid problems in the passthrough routines. Change-ID: Ieb56866f21895e6c1fc514b7328c3df79807a57c Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by:
-
Shannon Nelson authored
Don't set our internal debug_mask at startup unless we get specific signal to from the debug module parameter. This should take care of the issue with all the device capabilities getting printed even when we hadn't asked for the debug info. Change-ID: I7fbc6bd8b11ed9b0631ec018ff36015a04100b6c Signed-off-by:
-
Deepthi Kavalur authored
Display MSIx vector count for HW capabilities. Change-ID: I4b41e9b50360cf660e7fbcb85b9390fedcf313b1 Signed-off-by:
Deepthi Kavalur <deepthi.kavalur@intel.com> Tested-by:
-
- 06 Apr, 2016 1 commit
-
-
Stefan Assmann authored
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
-
