In order to allow different handling for next-hop tree dumper and for
bucket dumper, parameterize the next-hop tree walker with a callback. Add
rtm_dump_nexthop_cb() with just the bits relevant for next-hop tree
dumping.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extract from rtm_dump_nexthop() a helper to walk the next hop tree. A
separate function for this will be reusable from the bucket dumper.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The dump operations need to keep state from one invocation to another. A
scratch area is dedicated for this purpose in the passed-in argument, cb,
namely via two aliased arrays, struct netlink_callback.args and .ctx.

Dumping of buckets will end up having to iterate over next hops as well,
and it would be nice to be able to reuse the iteration logic with the NH
dumper. The fact that the logic currently relies on fixed index to the
.args array, and the indices would have to be coordinated between the two
dumpers, makes this somewhat awkward.

To make the access patters clearer, introduce a helper struct with a NH
index, and instead of using the .args array directly, use it through this
structure.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Requests to dump nexthops have many attributes in common with those that
requests to dump buckets of resilient NH groups will have. However, they
have different policies. To allow reuse of this code, extract a
policy-agnostic wrapper out of nh_valid_dump_req(), and convert this
function into a thin wrapper around it.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Requests to dump nexthops have many attributes in common with those that
requests to dump buckets of resilient NH groups will have. In order to make
reuse of this code simpler, convert the code to use a single structure with
filtering configuration instead of passing around the parameters one by
one.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

After there are several next-hop group types, initialization and
finalization of notifier type needs to reflect the actual type. Transform
nh_notifier_grp_info_init() and _fini() to make extending them easier.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently there are only two types of in-kernel nexthop notification.
The two are distinguished by the 'is_grp' boolean field in 'struct
nh_notifier_info'.

As more notification types are introduced for more next-hop group types, a
boolean is not an easily extensible interface. Instead, convert it to an
enum.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Most of the code that deals with nexthop groups relies on the fact that the
group is of exactly one well-known type. Currently there is only one type,
"mpath", but as more next-hop group types come, it becomes desirable to
have a central place where the setting is validated. Introduce such place
into nexthop_create_group(), such that the check is done before the code
that relies on that invariant is invoked.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The values that a next-hop group needs to keep track of depend on the group
type. Introduce a union to separate fields specific to the mpath groups
from fields specific to other group types.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The logic for selecting path depends on the next-hop group type. Adapt the
nexthop_select_path() to dispatch according to the group type.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nexthop_free_mpath really should be nexthop_free_group. Rename it.
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Julian Wiedmann says:

====================
net/iucv: updates 2021-01-28

This reworks & simplifies the TX notification path in af_iucv, so that we
can send out SG skbs over TRANS_HIPER sockets. Also remove a noisy
WARN_ONCE() in the RX path.
====================

Link: https://lore.kernel.org/r/20210128114108.39409-1-jwi@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The TX path no longer falls apart when some of its SG skbs are later
linearized by lower layers of the stack. So enable the use of SG skbs
in iucv_sock_sendmsg() again.

This effectively reverts
commit dc5367bc ("net/af_iucv: don't use paged skbs for TX on HiperSockets").
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Stop maintaining the skb_send_q list for TRANS_HIPER sockets.

Not only is it extra overhead, but keeping around a list of skb clones
means that we later also have to match the ->sk_txnotify() calls
against these clones and free them accordingly.
The current matching logic (comparing the skbs' shinfo location) is
frustratingly fragile, and breaks if the skb's head is mangled in any
sort of way while passing from dev_queue_xmit() to the device's
HW queue.

Also adjust the interface for ->sk_txnotify(), to make clear that we
don't actually care about any skb internals.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The TX code keeps track of all skbs that are in-flight but haven't
actually been sent out yet. For native IUCV sockets that's not a huge
deal, but with TRANS_HIPER sockets it would be much better if we
didn't need to maintain a list of skb clones.

Note that we actually only care about the _count_ of skbs in this stage
of the TX pipeline. So as prep work for removing the skb tracking on
TRANS_HIPER sockets, keep track of the skb count in a separate variable
and pair any list {enqueue, unlink} with a count {increment, decrement}.

Then replace all occurences where we currently look at the skb list's
fill level.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Whoever called iucv_sk(sk)->sk_txnotify() must already know that they're
dealing with an af_iucv socket.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported the following finding:

AF_IUCV failed to receive skb, len=0
WARNING: CPU: 0 PID: 522 at net/iucv/af_iucv.c:2039 afiucv_hs_rcv+0x174/0x190 net/iucv/af_iucv.c:2039
CPU: 0 PID: 522 Comm: syz-executor091 Not tainted 5.10.0-rc1-syzkaller-07082-g55027a88ec9f #0
Hardware name: IBM 3906 M04 701 (KVM/Linux)
Call Trace:
 [<00000000b87ea538>] afiucv_hs_rcv+0x178/0x190 net/iucv/af_iucv.c:2039
([<00000000b87ea534>] afiucv_hs_rcv+0x174/0x190 net/iucv/af_iucv.c:2039)
 [<00000000b796533e>] __netif_receive_skb_one_core+0x13e/0x188 net/core/dev.c:5315
 [<00000000b79653ce>] __netif_receive_skb+0x46/0x1c0 net/core/dev.c:5429
 [<00000000b79655fe>] netif_receive_skb_internal+0xb6/0x220 net/core/dev.c:5534
 [<00000000b796ac3a>] netif_receive_skb+0x42/0x318 net/core/dev.c:5593
 [<00000000b6fd45f4>] tun_rx_batched.isra.0+0x6fc/0x860 drivers/net/tun.c:1485
 [<00000000b6fddc4e>] tun_get_user+0x1c26/0x27f0 drivers/net/tun.c:1939
 [<00000000b6fe0f00>] tun_chr_write_iter+0x158/0x248 drivers/net/tun.c:1968
 [<00000000b4f22bfa>] call_write_iter include/linux/fs.h:1887 [inline]
 [<00000000b4f22bfa>] new_sync_write+0x442/0x648 fs/read_write.c:518
 [<00000000b4f238fe>] vfs_write.part.0+0x36e/0x5d8 fs/read_write.c:605
 [<00000000b4f2984e>] vfs_write+0x10e/0x148 fs/read_write.c:615
 [<00000000b4f29d0e>] ksys_write+0x166/0x290 fs/read_write.c:658
 [<00000000b8dc4ab4>] system_call+0xe0/0x28c arch/s390/kernel/entry.S:415
Last Breaking-Event-Address:
 [<00000000b8dc64d4>] __s390_indirect_jump_r14+0x0/0xc

Malformed RX packets shouldn't generate any warnings because
debugging info already flows to dropmon via the kfree_skb().
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Julian Wiedmann says:

====================
s390/qeth: updates 2021-01-28

Nothing special, mostly fine-tuning and follow-on cleanups for earlier fixes.
====================

Link: https://lore.kernel.org/r/20210128112551.18780-1-jwi@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When do_qdio() returns with an unexpected error, qeth_flush_buffers()
kicks off a recovery action.

In such a case there's no point in starting TX completion processing,
the device gets torn down anyway. So take a closer look at do_qdio()'s
return value, and skip the TX completion processing accordingly.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As part of the TX queue selection for af_iucv skbs,
qeth_l3_get_cast_type_rcu() ends up calling qeth_get_ether_cast_type().
Which is rather fragile, since such skbs don't have a proper ETH header
and we rely on it being zeroed out in the right places. Add a separate
case for ETH_P_AF_IUCV instead that does the right thing.

When later building the HW header for such skbs, don't hard-code the
cast type but follow the same path as for other protocol types. Here
the cast type should naturally come from the skb's queue mapping.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

qeth_l3_hard_start_xmit() already determined the skb's proto. Avoid
doing so a second time when it calls qeth_l3_get_cast_type().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Replace our home-grown helper with the more robust vlan_get_protocol().
This is pretty much a 1:1 replacement, we just need to pass around a
proper ETH_P_* everyhwere and convert the old value range.

For readability also convert the protocol checks in
qeth_l3_hard_start_xmit() to a switch statement.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We have two usage patterns:
1. get & ->setup() a new discipline, or
2. ->remove() & put the currently loaded one.

Add corresponding helpers that hide the internals & error handling.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: hardware pipeline cleanup fixes

There is a procedure currently referred to as a "tag process" that
is performed to clear the IPA hardware pipeline--either at the time
of a modem crash, or when suspending modem GSI channels.

One thing done in this procedure is issuing a command that sends a
data packet originating from the AP->command TX endpoint, destined
for the AP<-LAN RX (default) endpoint.  And although we currently
wait for the send to complete, we do *not* wait for the packet to be
received.  But the pipeline can't be assumed clear until we have
actually received this packet.

This series addresses this by detecting when the pipeline-clearing
packet has been received, and using a completion to allow a waiter
to know when that has happened.  This uses the IPA status capability
(which sends an extra status buffer for certain packets).  It also
uses the ability to supply a "tag" with a packet, which will be
delivered with the packet's status buffer.  We tag the data packet
that's sent to clear the pipeline, and use the receipt of a status
buffer associated with a tagged packet to determine when that packet
has arrived.

"Tag status" just desribes one aspect of this procedure, so some
symbols are renamed to be more like "pipeline clear" so they better
describe the larger purpose.  Finally, two functions used in this
code don't use their arguments, so those arguments are removed.
====================

Link: https://lore.kernel.org/r/20210126185703.29087-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The only time we transfer data (rather than issuing a command) out
of the AP->command TX endpoint is when we're clearing the hardware
pipeline.  All that's needed is a "small" data buffer, and its
contents aren't even important.

For convenience, we just transfer a command structure in this case
(it's already mapped for DMA).  The TRE is added to a transaction
using ipa_cmd_ip_tag_status_add(), but we ignore the size value
provided to that function.  So just get rid of the size argument.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We only send a tagged packet from the AP->command TX endpoint when
we're clearing the hardware pipeline.  And when we receive the
tagged packet we don't care what the actual tag value is.

Stop passing a tag value to ipa_cmd_ip_tag_status_add(), and just
encode 0 as the tag sent.  Fix the function that encodes the tag so
it uses the proper byte ordering.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There are times, such as when the modem crashes, when we issue
commands to clear the IPA hardware pipeline.  These commands include
a data transfer command that delivers a small packet directly to the
default (AP<-LAN RX) endpoint.

The places that do this wait for the transactions that contain these
commands to complete, but the pipeline can't be assumed clear until
the sent packet has been *received*.

The small transfer will be delivered with a status structure, and
that status will indicate its tag is valid.  This is the only place
we send a tagged packet, so we use the tag to determine when the
pipeline clear packet has arrived.

Add a completion to the IPA structure to to be used to signal
the receipt of a pipeline clear packet.  Create a new function
ipa_cmd_pipeline_clear_wait() that will wait for that completion.

Reinitialize the completion whenever pipeline clear commands are
added to a transaction.  Extend ipa_endpoint_status_tag() to check
whether a packet whose status contains a valid tag was sent from the
AP->command TX endpoint, and if so, signal the new IPA completion.

Have all callers of ipa_cmd_pipeline_clear_add() wait for the
pipeline clear indication after the transaction that clears the
pipeline has completed.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce ipa_endpoint_status_tag(), which returns true if received
status indicates its tag field is valid.  The endpoint parameter is
not yet used.

Call this from ipa_status_drop_packet(), and drop the packet if the
status indicates the tag was valid.  Pass the endpoint pointer to
ipa_status_drop_packet(), and rename it ipa_endpoint_status_drop().
The endpoint will be used in the next patch.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Rearrange some comments and assignments made when handling a packet
that is received with status, aiming to improve understandability.

Use DIV_ROUND_CLOSEST() to get a better per-packet true size estimate.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There is a set of functions and symbols related to performing
"tag_process" immediate commands to clear the IPA pipeline.  The
name is related to one of the commands issued when doing this, but
it doesn't really convey the overall purpose of taking this action.

The purpose is to take some steps to "clear out" the hardware
pipeline, and to wait until that process completes, to ensure the
IPA hardware is in a well-defined state.

Rename these symbols to use "pipeline_clear" in their names instead.
Add some comments to explain a bit more about what's going on.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The current layout of net_device is not optimal for cacheline usage.

The member adj_list.lower linked list is split between cacheline 2 and 3.
The ifindex is placed together with stats (struct net_device_stats),
although most modern drivers don't update this stats member.

The members netdev_ops, mtu and hard_header_len are placed on three
different cachelines. These members are accessed for XDP redirect into
devmap, which were noticeably with perf tool. When not using the map
redirect variant (like TC-BPF does), then ifindex is also used, which is
placed on a separate fourth cacheline. These members are also accessed
during forwarding with regular network stack. The members priv_flags and
flags are on fast-path for network stack transmit path in __dev_queue_xmit
(currently located together with mtu cacheline).

This patch creates a read mostly cacheline, with the purpose of keeping the
above mentioned members on the same cacheline.

Some netdev_features_t members also becomes part of this cacheline, which is
on purpose, as function netif_skb_features() is on fast-path via
validate_xmit_skb().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/161168277983.410784.12401225493601624417.stgit@firesoulSigned-off-by: Jakub Kicinski <kuba@kernel.org>

TX/RX descriptor ring fields are always little-endian, but conversion
wasn't performed for big-endian CPUs, so the driver failed to work.

This patch makes the driver work on big-endian CPUs. It was tested and
confirmed to work on NXP P1010 processor (PowerPC).
Signed-off-by: Alexey Denisov <rtgbnm@gmail.com>
Link: https://lore.kernel.org/r/20210128044859.280219-1-rtgbnm@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'e100_alloc()', GFP_KERNEL can be used because
it is only called from the probe function and no lock is acquired.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Link: https://lore.kernel.org/r/20210128210736.749724-1-christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pass through mode is to allow packets in MAP format to be passed
on to the stack. rmnet driver can be used to process and demultiplex
these packets.

Pass through mode can be enabled when the device is in raw ip mode only.
Conversely, raw ip mode cannot be disabled when pass through mode is
enabled.

Userspace can use pass through mode in conjunction with rmnet driver
through the following steps-

1. Enable raw ip mode on qmi_wwan device
2. Enable pass through mode on qmi_wwan device
3. Create a rmnet device with qmi_wwan device as real device using netlink
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/1611560015-20034-1-git-send-email-subashab@codeaurora.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniele Palmas says:

====================
net: usb: qmi_wwan: new mux_id sysfs file

this patch series add a sysfs file to let userspace know which mux
id has been used to create a qmimux network interface.

I'm aware that adding new sysfs files is not usually the right path,
but my understanding is that this piece of information can't be
retrieved in any other way and its absence restricts how
userspace application (e.g. like libqmi) can take advantage of the
qmimux implementation in qmi_wwan.
====================

Link: https://lore.kernel.org/r/20210127153433.12237-1-dnlplm@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Document qmap/mux_id sysfs file showing qmimux interface id
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add qmimux interface sysfs file qmap/mux_id to show qmap id set
during the interface creation, in order to provide a method for
userspace to associate QMI control channels to network interfaces.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This change fixes the checkpatch warning described in this commit
commit cbacb5ab ("docs: printk-formats: Stop encouraging use of
  unnecessary %h[xudi] and %hh[xudi]")

Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].

Cleanup output to use __func__ over explicit function strings.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210124190804.1964580-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/can/dev.c
  b552766c ("can: dev: prevent potential information leak in can_fill_info()")
  3e77f70e ("can: dev: move driver related infrastructure into separate subdir")
  0a042c6e ("can: dev: move netlink related code into seperate file")

  Code move.

drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
  57ac4a31 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down")
  214baf22 ("net/mlx5e: Support HTB offload")

  Adjacent code changes

net/switchdev/switchdev.c
  20776b46 ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP")
  ffb68fc5 ("net: switchdev: remove the transaction structure from port object notifiers")
  bae33f2b ("net: switchdev: remove the transaction structure from port attributes")

  Transaction parameter gets dropped otherwise keep the fix.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 subfunction support

Parav Pandit says:

This patchset introduces support for mlx5 subfunction (SF).

A subfunction is a lightweight function that has a parent PCI function on
which it is deployed. mlx5 subfunction has its own function capabilities
and its own resources. This means a subfunction has its own dedicated
queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from
the parent PCI function.

When subfunction is RDMA capable, it has its own QP1, GID table and rdma
resources neither shared nor stolen from the parent PCI function.

A subfunction has dedicated window in PCI BAR space that is not shared
with the other subfunctions or parent PCI function. This ensures that all
class devices of the subfunction accesses only assigned PCI BAR space.

A Subfunction supports eswitch representation through which it supports tc
offloads. User must configure eswitch to send/receive packets from/to
subfunction port.

Subfunctions share PCI level resources such as PCI MSI-X IRQs with
their other subfunctions and/or with its parent PCI function.

Subfunction support is discussed in detail in RFC [1] and [2].
RFC [1] and extension [2] describes requirements, design and proposed
plumbing using devlink, auxiliary bus and sysfs for systemd/udev
support. Functionality of this patchset is best explained using real
examples further below.

overview:
--------
A subfunction can be created and deleted by a user using devlink port
add/delete interface.

A subfunction can be configured using devlink port function attribute
before its activated.

When a subfunction is activated, it results in an auxiliary device on
the host PCI device where it is deployed. A driver binds to the
auxiliary device that further creates supported class devices.

example subfunction usage sequence:
-----------------------------------
Change device to switchdev mode:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev

Add a devlink port of subfunction flavour:
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88

Configure mac address of the port function:
$ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88

Now activate the function:
$ devlink port function set ens2f0npf0sf88 state active

Now use the auxiliary device and class devices:
$ devlink dev show
pci/0000:06:00.0
auxiliary/mlx5_core.sf.4

$ ip link show
127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff
    altname enp6s0f0np0
129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff

$ rdma dev show
43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112
44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112

After use inactivate the function:
$ devlink port function set ens2f0npf0sf88 state inactive

Now delete the subfunction port:
$ devlink port del ens2f0npf0sf88

[1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/
[2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2

=================

* tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Add devlink subfunction port documentation
  devlink: Extend devlink port documentation for subfunctions
  devlink: Add devlink port documentation
  net/mlx5: SF, Port function state change support
  net/mlx5: SF, Add port add delete functionality
  net/mlx5: E-switch, Add eswitch helpers for SF vport
  net/mlx5: E-switch, Prepare eswitch to handle SF vport
  net/mlx5: SF, Add auxiliary device driver
  net/mlx5: SF, Add auxiliary device support
  net/mlx5: Introduce vhca state event notifier
  devlink: Support get and set state of port function
  devlink: Support add and delete devlink port
  devlink: Introduce PCI SF port flavour and port attribute
  devlink: Prepare code to fill multiple port function attributes
====================

Link: https://lore.kernel.org/r/20210122193658.282884-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>