- 20 Aug, 2005 3 commits
-
-
ravinandan.arakali@neterion.com authored
Hi, Patch Description: This patch incorporates the following hardware fixes required for Xframe II adapter. 1. New values to program the dtx_control register. 2. Disable memory controller interrupts(MC_INTR) since these are now monitored thru' a poll routine. 3. Don't reset an XframeII card on an ECC double-bit error(It can recover). 4. Save/restore PCI config space before/after a reset irrespective of Xframe I or II card. 5. Bumped up the driver version no. to 2.0.3.1 Please review the patch and apply the same if it looks ok. Signed-off-by:
Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Jochen Friedrich authored
Cleanup: remove two prototypes. Signed-off-by:
Jochen Friedrich <jochen@scram.de> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Jochen Friedrich authored
Now that all tms380 devices have a valid struct device with dma_mask, remove dmalimit from tmsdev_init(). Kconfig: depend tms380tr and madgemc on MCA. abyss.c, proteon.c, skisa.c, tmspci.c, tms380tr.h: remove dmalimit parameter from tmsdev_init(). tms380tr.c: use device->dma_mask instead of dmalimit. madgemc.c: move to new MCA API using struct device. Signed-off-by:
Jochen Friedrich <jochen@scram.de> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
- 19 Aug, 2005 7 commits
-
-
Jeff Garzik authored
-
Andrew Morton authored
drivers/net/e1000/e1000_main.c: In function `e1000_clean_tx_irq': drivers/net/e1000/e1000_main.c:2774: warning: size_t format, dma_addr_t arg (arg 8) Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Komuro authored
The multicast code of the fmvj18x_cs driver is broken. I fixed it to work properly. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Francois Romieu authored
The Linksys EG1032 uses Realtek's 8169 chipset. Credit goes to Bob Wilson <bwilson4web@hotmail.com> for the report. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Nishanth Aravamudan authored
Use msleep_interruptible() instead of delay_cycx() to guarantee the task delays as expected. Remove the prototype and definition of delay_cycx(). Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Manfred Spraul authored
Rüdiger found a bug in nv_open that explains some of the reports with duplex mismatches: nv_open calls nv_update_link_speed for initializing the hardware link speed registers. If current link setting matches the values in np->linkspeed and np->duplex, then the function does nothing. Usually, doing nothing is the right thing, but not in nv_open: During nv_open, the registers must be initialized because the nic was reset. The attached patch fixes that by setting np->linkspeed to an invalid value before calling nv_update_link_speed from nv_open. Signed-Off-By:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Jeff Garzik authored
-
- 18 Aug, 2005 30 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Herbert Xu authored
This patch fixes a false-positive from debug_smp_processor_id(). The processor ID is only used to look up crypto_tfm objects. Any processor ID is acceptable here as long as it is one that is iterated on by for_each_cpu(). Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
1) cpufreq wants frequenceis in KHZ not MHZ 2) provide ->get() method so curfreq node is created Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Based upon a bug report and initial patch by Ollie Wild. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ralf Baechle authored
Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jay Vosburgh authored
Change operations on rif_lock from spin_{un}lock_bh to spin_{un}lock_irq{save,restore} equivalents. Some of the rif_lock critical sections are called from interrupt context via tr_type_trans->tr_add_rif_info. The TR NIC drivers call tr_type_trans from their packet receive handlers. Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ben Dooks authored
The DM9000 driver is responding to ioctl() calls it should not be. This can cause problems with the wireless tools incorrectly indentifying the device as wireless capable, and crashing under certain operations. This patch also moves the version printk() to the init call, so that you only get it once for multiple devices, and to show it is loaded if there are no defined dm9000s Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Ben Dooks authored
Fix DM9000 driver usage of spinlocks, which mainly came to light when running a kernel with spinlock debugging. These come down to: 1) Un-initialised spin lock 2) Several cases of using spin_xxx(lock) and not spin_xxx(&lock) 3) move the locking around the phy reg for read/write to only keep the lock when actually reading or writing to the phy. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Pierre Ossman authored
After suspend the driver needs to retest link status in case the cable has been inserted or removed during the suspend. Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Ralf Baechle authored
- Using the right register clearly improves chances of getting the MII code and thus the driver working at all. - On startup check the media type before setting up duplex or we might spend the first 1.2s with a wrong duplex setting. - Get rid of whitespace lines. Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Narendra Sankar authored
BCM5785 (HT1000) is a Opteron Southbridge from Serverworks/Broadcom that incorporates a single channel ATA100 IDE controller that is functionally identical to the Serverworks CSB6 IDE controller. This patch adds support for the new PCI device ID and also the support for this controller. Signed-off-by:
Narendra Sankar <nsankar@broadcom.com> Acked-by:
Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
Matt Gillette authored
Adds support for Netcell Revolution to pci-ide generic driver by including it in the list of devices matched. Includes the Revolution in the list of simplex devices forced into DMA mode. Signed-off-by:
Matt Gillette <matt.gillette@netcell.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
Grant Coady authored
Signed-off-by:
Grant Coady <gcoady@gmail.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
Juha-Matti Tapio authored
drivers/ide/ppc/pmac.c uses symbols ide_build_sglist, __ide_dma_off_quietly, __ide_dma_on and __ide_dma_timeout when CONFIG_BLK_DEV_IDEDMA_PMAC is defined. The declarations for these symbols (in ide.h) depend on CONFIG_BLK_DEV_IDEDMA_PCI. There is a missing dependency for this in drivers/ide/Kconfig which causes drivers/ide/ppc/pmac.c to fail to build if CONFIG_BLK_DEV_IDEDMA_PMAC is selected but CONFIG_BLK_DEV_IDEDMA_PCI is not. Signed-off-by:
Juha-Matti Tapio <jmtapio@verkkotelakka.net> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
Bartlomiej Zolnierkiewicz authored
* IDEFLOPPY_TICKS_DELAY assumed HZ == 100, fix it * increase the delay to 50ms (to match comment in the code) Thanks to Manfred Scherer <manfred.scherer.mhm@t-online.de> for reporting the problem and testing the patch. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
Andi Kleen authored
Since early CPU identify is in this information is already available Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Matt Porter authored
Fixes the incorrect DCR base value for the 440SP SRAM controller. Signed-off-by:
Matt Porter <mporter@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Matt Porter authored
Fixes build on 4xx stb03xxx when general purpose dma engine support is enabled. Signed-off-by:
Matt Porter <mporter@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
Running UML inside a detached screen delivers SIGWINCH when UML is not expecting it. This patch ignores them. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
asm/elf.h breaks the x86_64 build. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Matt Mackall authored
As suggested by Michael Kerrisk <mtk-manpages@gmx.net>, make RLIMIT_NICE consistent with getpriority before it becomes available in released glibc. Signed-off-by:
Matt Mackall <mpm@selenic.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Chris Wright <chrisw@osdl.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Michael Iatrou authored
This driver spams the user. Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jan Kara authored
When i_acl_default is set to some error we do not hold the lock (hence we are not allowed to drop it and reacquire later). Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Cc: <reiserfs-dev@namesys.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
... otherwise we might try to load a bitmap from an array which hasn't one. The bug is that if you create an array with an internal bitmap, shut it down, and then create an array with the same md device, the md drive will assume it should have a bitmap too. As the array can be created with a different md device, it is mostly an inconvenience. I'm pretty sure there is no risk of data corruption. Signed-off-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Robert Love authored
Add inotify and ioprio syscall stubs to SH64. Signed-off-by:
Robert Love <rml@novell.com> Acked-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Robert Love authored
Add inotify and ioprio syscall stubs to SH. Signed-off-by:
Robert Love <rml@novell.com> Acked-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Chuck Lever authored
Down the road we want to eliminate the use of the global kernel lock entirely from the NFS client. To do this, we need to protect the fields in the nfs_inode structure adequately. Start by serializing updates to the "cache_validity" field. Note this change addresses an SMP hang found by njw@osdl.org, where processes deadlock because nfs_end_data_update and nfs_revalidate_mapping update the "cache_validity" field without proper serialization. Test plan: Millions of fsx ops on SMP clients. Run Nick Wilson's breaknfs program on large SMP clients. Signed-off-by:
Chuck Lever <cel@netapp.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Chuck Lever authored
Introduce atomic bitops to manipulate the bits in the nfs_inode structure's "flags" field. Using bitops means we can use a generic wait_on_bit call instead of an ad hoc locking scheme in fs/nfs/inode.c, so we can remove the "nfs_i_wait" field from nfs_inode at the same time. The other new flags field will continue to use bitmask and logic AND and OR. This permits several flags to be set at the same time efficiently. The following patch adds a spin lock to protect these flags, and this spin lock will later cover other fields in the nfs_inode structure, amortizing the cost of using this type of serialization. Test plan: Millions of fsx ops on SMP clients. Signed-off-by:
Chuck Lever <cel@netapp.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-