proc_create_net() and remove_proc_entry() already contain the case
whether to define CONFIG_PROC_FS, so remove #ifdef CONFIG_PROC_FS.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>

'send_section_map' is a bitmap. So use 'bitmap_zalloc()' to simplify code,
improve the semantic and avoid some open-coded arithmetic in allocator
arguments.

Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.

While at it, change an '== NULL' test into a '!'.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

'cid_map' is a bitmap. So use 'bitmap_zalloc()' to simplify code,
improve the semantic and avoid some open-coded arithmetic in allocator
arguments.

Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.

Also change some 'memset()' into 'bitmap_zero()' to keep consistency. This
is also much less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'mask' bitmap is local to this function. So the non-atomic
'__set_bit()' can be used to save a few cycles.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/cold/could/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-By: Devesh Sharma <devesh.s.sharma@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are three boolean variable which were not initialized and later
being used in the code.
Signed-off-by: Yacov Simhony <ysimhony@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pcmcia_get_mac_from_cis is only called from networking and
recent changes made it call dev_addr_mod() which is itself
only defined if NET.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: adeef3e3 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Due to const dev_addr changes.
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch brings in support for device trace collection.
It implements relayfs interface for pushing device trace
from kernel space to user space.

Driver gets the debugfs base directory associated to WWAN
Device and creates trace_control and trace debugfs for
device tracing. Both trace_control & trace debugfs are
created under /sys/kernel/debug/wwan/wwan0/.

In order to collect device trace on trace0 interface, user
need to write 1 to trace_ctl interface.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch set brings in a common debugfs base directory
i.e. /sys/kernel/debugfs/wwan/ in WWAN Subsystem for a
WWAN device instance. So that it avoids driver polluting
debugfs root with unrelated directories & possible name
collusion.

Having a common debugfs base directory for WWAN drivers
eases user to match control devices with debugfs entries.

WWAN Subsystem creates dentry (/sys/kernel/debugfs/wwan)
on module load & removes dentry on module unload.

When driver registers a new wwan device, dentry (wwanX)
is created for WWAN device instance & on driver unregister
dentry is removed.

New API is introduced to return the wwan device instance
dentry so that driver can create debugfs entries under it.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Argument of a helper is missing a const.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: adeef3e3 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support of XDP for the MANA driver.

Supported XDP actions:
	XDP_PASS, XDP_TX, XDP_DROP, XDP_ABORTED

XDP actions not yet supported:
	XDP_REDIRECT
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Gerhard Engleder says:

====================
TSN endpoint Ethernet MAC driver

This series adds a driver for my FPGA based TSN endpoint Ethernet MAC.
It also includes the device tree binding.

The device is designed as Ethernet MAC for TSN networks. It will be used
in PLCs with real-time requirements up to isochronous communication with
protocols like OPC UA Pub/Sub.

v3:
 - set MAC mode based on PHY information (Andrew Lunn)
 - remove/postpone loopback mode interface (Andrew Lunn)
 - add suppress_preamble node support (Andrew Lunn)
 - add mdio timeout (Andrew Lunn)
 - no need to call phy_start_aneg (Andrew Lunn)
 - remove unreachable code (Andrew Lunn)
 - move 'struct napi_struct' closer to queues (Vinicius Costa Gomes)
 - remove unused variable (kernel test robot)
 - switch from mdio interrupt to polling
 - mdio register without PHY address flag
 - thread safe interrupt enable register
 - add PTP_1588_CLOCK_OPTIONAL dependency to Kconfig
 - introduce dmadev for DMA allocation
 - mdiobus for platforms without device tree
 - prepare MAC address support for platforms without device tree
 - add missing interrupt disable to probe error path

v2:
 - add C45 check (Andrew Lunn)
 - forward phy_connect_direct() return value (Andrew Lunn)
 - use phy_remove_link_mode() (Andrew Lunn)
 - do not touch PHY directly, use PHY subsystem (Andrew Lunn)
 - remove management data lock (Andrew Lunn)
 - use phy_loopback (Andrew Lunn)
 - remove GMII2RGMII handling, use xgmiitorgmii (Andrew Lunn)
 - remove char device for direct TX/RX queue access (Andrew Lunn)
 - mdio node for mdiobus (Rob Herring)
 - simplify compatible node (Rob Herring)
 - limit number of items of reg and interrupts nodes (Rob Herring)
 - restrict phy-connection-type node (Rob Herring)
 - reference to mdio.yaml under mdio node (Rob Herring)
 - remove device tree (Michal Simek)
 - fix %llx warning (kernel test robot)
 - fix unused tmp variable warning (kernel test robot)
 - add missing of_node_put() for of_parse_phandle()
 - use devm_mdiobus_alloc()
 - simplify mdiobus read/write
 - reduce required nodes
 - ethtool priv flags interface for loopback
 - add missing static for some functions
 - remove obsolete hardware defines
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The TSN endpoint Ethernet MAC is a FPGA based network device for
real-time communication.

It is integrated as Ethernet controller with ethtool and PTP support.
For real-time communcation TC_SETUP_QDISC_TAPRIO is supported.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TSN endpoint Ethernet MAC is a FPGA based network device for
real-time communication.

It is integrated as normal Ethernet controller with
ethernet-controller.yaml and mdio.yaml.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Engleder develops FPGA based controllers for real-time communication.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 4904b6ea ("net: phy: phylink: Use PHY device interface if
N/A") introduced handling for the phy interface mode where this is not
known at phylink creation time. This was never added to the OF/fwnode
paths, but is necessary when the phy is present in DT, but the phy-mode
is not specified.

Add this handling.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some devices expose memory-mapped c22-compliant PHYs. Because these
devices do not have an MDIO bus, we cannot use the existing helpers.
Refactor the existing helpers to allow supplying the values for c22
registers directly, instead of using MDIO to access them. Only get_state
and set_advertisement are converted, since they contain the most complex
logic. Because set_advertisement is never actually used outside
phylink_mii_c22_pcs_config, move the MDIO-writing part into that
function. Because some modes do not need the advertisement register set
at all, we use -EINVAL for this purpose.

Additionally, a new function phylink_pcs_enable_an is provided to
determine whether to enable autonegotiation.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev->gso_max_segs is written under RTNL protection, or when the device is
not yet visible, but is read locklessly.

Add netif_set_gso_max_segs() helper.

Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_segs()
where we can to better document what is going on.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev->gso_max_size is written under RTNL protection, or when the device is
not yet visible, but is read locklessly.

Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_size()
where we can to better document what is going on.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
ethtool: add support to set/get tx copybreak buf size and rx buf len

This series add support to set/get tx copybreak buf size and rx buf len via
ethtool and hns3 driver implements them.

Tx copybreak buf size is used for tx copybreak feature which for small size
packet or frag. Use ethtool --get-tunable command to get it, and ethtool
--set-tunable command to set it, examples are as follow:

1. set tx spare buf size to 102400:
$ ethtool --set-tunable eth1 tx-buf-size 102400

2. get tx spare buf size:
$ ethtool --get-tunable eth1 tx-buf-size
tx-buf-size: 102400

Rx buf len is buffer length of each rx BD. Use ethtool -g command to get
it, and ethtool -G command to set it, examples are as follow:

1. set rx buf len to 4096
$ ethtool -G eth1 rx-buf-len 4096

2. get rx buf len
$ ethtool -g eth1
...
RX Buf Len:     4096

Change log:
V5 -> V6
1.Fix compile error for divers/s390.

V4 -> V5
1.Change struct ethtool_ringparam_ext to kernel_ethtool_ringparam.
2.change "__u32 rx_buf_len" to "u32 rx_buf_len".

V3 -> V4
1.Fix a few allmodconfig compile warning.
2.Add more '=' synbol to ethtool-netlink.rst to refine format.
3.Move definement of struct ethtool_ringparam_ext to include/linux/ethtool.h.
4.Move related modify of rings_fill_reply() from patch 4/6 to patch 3/6.

V2 -> V3
1.Remove documentation for tx copybreak buf size, there is description for
it in userspace ethtool.
2.Move extending parameters for get/set_ringparam function from patch3/6
to patch 4/6.

V1 -> V2
1.Add documentation for rx buf len and tx copybreak buf size.
2.Extend structure ringparam_ext for extenal ring params.
3.Change type of ETHTOOL_A_RINGS_RX_BUF_LEN from NLA_U32 to
  NLA_POLICY_MIN(NLA_U32, 1).
4.Add supported_ring_params in ethtool_ops to indicate if support external
  params.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The way to set tx spare buf via module parameter is not such
convenient as the way to set it via ethtool.

So,remove the way to set tx spare buf via module parameter.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rx buf len is for rx BD buffer size, support setting it via ethtool -G
parameter and getting it via ethtool -g parameter.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add two new parameters kernel_ringparam and extack for
.get_ringparam and .set_ringparam to extend more ring params
through netlink.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to set rx buf len via ethtool -G parameter and get
rx buf len via ethtool -g parameter.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tx copybreak buf size is used for tx copybreak feature, the feature is
used for small size packet or frag. It adds a queue based tx shared
bounce buffer to memcpy the small packet when the len of xmitted skb is
below tx_copybreak(value to distinguish small size and normal size),
and reduce the overhead of dma map and unmap when IOMMU is on.

Support setting it via ethtool --set-tunable parameter and getting
it via ethtool --get-tunable parameter.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for ethtool to set/get tx copybreak buf size.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: More socket option support

These patches add MPTCP socket support for a few additional socket
options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT, IPV6_FREEBIND, and
IPV6_TRANSPARENT.

Patch 1 exposes __ip_sock_set_tos() for use in patch 2.

Patch 2 adds IP_TOS support.

Patches 3 and 4 add the freebind and transparent support, with a
selftest for the latter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

No hard dependencies here, just skip if test environ lacks
nft binary or the needed kernel config options.

The test case spawns listener in ns2 but ns1 will connect
to the ip address of ns4.

policy routing + tproxy rule will redirect packets to ns2 instead
of forward.

v3: - update mptcp/config (Mat Martineau)
    - more verbose SKIP messages in mptcp_connect.sh
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These options also need to be set before bind, so do the sync of msk to
new ssk socket a bit earlier.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SOL_IP provides a way to configure network layer attributes in a
socket. This patch adds support for IP_TOS for setsockopt(.. ,SOL_IP, ..)

Support for SOL_IP is added in mptcp_setsockopt() and IP_TOS is handled in
a private function. The idea here is to take in the value passed for IP_TOS
and set it to the current subflow, open subflows as well new subflows that
might be created after the initial call to setsockopt(). This sync is done
using sync_socket_options(.., ssk) and setting the value of tos using
__ip_sock_set_tos(ssk,..).

The patch has been tested using the packetdrill script here -
https://github.com/multipath-tcp/mptcp_net-next/issues/220#issuecomment-947863717

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/220Signed-off-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Making the static function __ip_sock_set_tos() from net/ipv4/ip_sockglue.c
accessible by declaring it in include/net/ip.h
The reason for doing this is to use this function to set IP_TOS value in
mptcp_setsockopt() without the lock.
Signed-off-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net: constify netdev->dev_addr

Take care of a few stragglers and make netdev->dev_addr const.

netdev->dev_addr can be held on the address tree like any other
address now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a KUnit test for the dev_addr API.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since all netdev->dev_addr modifications go via dev_addr_mod()
we can put it on the list. When address is change remove it
and add it back.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev->dev_addr should only be modified via helpers,
but someone may be casting off the const. Add a runtime
check to catch abuses.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are no module callers in-tree and it's hard to justify
why anyone would init or flush addresses of a netdev (note
the flush is more of a destructor, it frees netdev->dev_addr).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. We converted all users to make modifications via appropriate
helpers, make netdev->dev_addr const.

The update helpers need to upcast from the buffer to
struct netdev_hw_addr.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x_vfpf_config_mac() was constified by not its stub.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Byte by byte assignments.

Fixes build on m68k.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>