- 14 Aug, 2024 5 commits
-
-
Donald Hunter authored
Fix missing initialisation of extack in flow offload. Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support") Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Donald Hunter authored
Add missing extack initialisation when ACKing BATCH_BEGIN and BATCH_END. Fixes: bf2ac490 ("netfilter: nfnetlink: Handle ACK flags for batch messages") Signed-off-by:
-
Tom Hughes authored
Commit 264640fc ("ipv6: distinguish frag queues by device for multicast and link-local packets") modified the ipv6 fragment reassembly logic to distinguish frag queues by device for multicast and link-local packets but in fact only the main reassembly code limits the use of the device to those address types and the netfilter reassembly code uses the device for all packets. This means that if fragments of a packet arrive on different interfaces then netfilter will fail to reassemble them and the fragments will be expired without going any further through the filters. Fixes: 648700f7 ("inet: frags: use rhashtables for reassembly units") Signed-off-by:
Tom Hughes <tom@compton.nu> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
This patch is based on the discussions between Neal Cardwell and Eric Dumazet in the link https://lore.kernel.org/netdev/20240726204105.1466841-1-quic_subashab@quicinc.com/ It was correctly pointed out that tp->window_clamp would not be updated in cases where net.ipv4.tcp_moderate_rcvbuf=0 or if (copied <= tp->rcvq_space.space). While it is expected for most setups to leave the sysctl enabled, the latter condition may not end up hitting depending on the TCP receive queue size and the pattern of arriving data. The updated check should be hit only on initial MSS update from TCP_MIN_MSS to measured MSS value and subsequently if there was an update to a larger value. Fixes: 05f76b2d ("tcp: Adjust clamping window for applications specifying SO_RCVBUF") Signed-off-by:
Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by:
Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eugene Syromiatnikov authored
ssn_offset field is u32 and is placed into the netlink response with nla_put_u32(), but only 2 bytes are reserved for the attribute payload in subflow_get_info_size() (even though it makes no difference in the end, as it is aligned up to 4 bytes). Supply the correct argument to the relevant nla_total_size() call to make it less confusing. Fixes: 5147dfb5 ("mptcp: allow dumping subflow context to userspace") Signed-off-by:
Eugene Syromiatnikov <esyr@redhat.com> Reviewed-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240812065024.GA19719@asgard.redhat.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 13 Aug, 2024 3 commits
-
-
David Thompson authored
A recent change to the driver exposed a bug where the MAC RX filters (unicast MAC, broadcast MAC, and multicast MAC) are configured and enabled before the RX path is fully initialized. The result of this bug is that after the PHY is started packets that match these MAC RX filters start to flow into the RX FIFO. And then, after rx_init() is completed, these packets will go into the driver RX ring as well. If enough packets are received to fill the RX ring (default size is 128 packets) before the call to request_irq() completes, the driver RX function becomes stuck. This bug is intermittent but is most likely to be seen where the oob_net0 interface is connected to a busy network with lots of broadcast and multicast traffic. All the MAC RX filters must be disabled until the RX path is ready, i.e. all initialization is done and all the IRQs are installed. Fixes: f7442a63 ("mlxbf_gige: call request_irq() after NAPI initialized") Reviewed-by:
Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by:
David Thompson <davthompson@nvidia.com> Reviewed-by:
Paolo Abeni <pabeni@redhat.com>
-
Long Li authored
After napi_complete_done() is called when NAPI is polling in the current process context, another NAPI may be scheduled and start running in softirq on another CPU and may ring the doorbell before the current CPU does. When combined with unnecessary rings when there is no need to arm the CQ, it triggers error paths in the hardware. This patch fixes this by calling napi_complete_done() after doorbell rings. It limits the number of unnecessary rings when there is no need to arm. MANA hardware specifies that there must be one doorbell ring every 8 CQ wraparounds. This driver guarantees one doorbell ring as soon as the number of consumed CQEs exceeds 4 CQ wraparounds. In practical workloads, the 4 CQ wraparounds proves to be big enough that it rarely exceeds this limit before all the napi weight is consumed. To implement this, add a per-CQ counter cq->work_done_since_doorbell, and make sure the CQ is armed as soon as passing 4 wraparounds of the CQ. Cc: stable@vger.kernel.org Fixes: e1b5683f ("net: mana: Move NAPI from EQ to CQ") Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1723219138-29887-1-git-send-email-longli@linuxonhyperv.comSigned-off-by:
-
Kuniyuki Iwashima authored
In macb_suspend(), idev->ifa_list is fetched with rcu_access_pointer() and later the pointer is dereferenced as ifa->ifa_local. So, idev->ifa_list must be fetched with rcu_dereference(). Fixes: 0cb8de39 ("net: macb: Add ARP support to WOL") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20240808040021.6971-1-kuniyu@amazon.comSigned-off-by:
-
- 12 Aug, 2024 11 commits
-
-
Zheng Zhang authored
When there are multiple ap interfaces on one band and with WED on, turning the interface down will cause a kernel panic on MT798X. Previously, cb_priv was freed in mtk_wed_setup_tc_block() without marking NULL,and mtk_wed_setup_tc_block_cb() didn't check the value, too. Assign NULL after free cb_priv in mtk_wed_setup_tc_block() and check NULL in mtk_wed_setup_tc_block_cb(). ---------- Unable to handle kernel paging request at virtual address 0072460bca32b4f5 Call trace: mtk_wed_setup_tc_block_cb+0x4/0x38 0xffffffc0794084bc tcf_block_playback_offloads+0x70/0x1e8 tcf_block_unbind+0x6c/0xc8 ... --------- Fixes: 79968444 ("net: ethernet: mtk_wed: introduce wed wo support") Signed-off-by:
Zheng Zhang <everything411@qq.com> Signed-off-by:
-
Haiyang Zhang authored
The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment is affected by the alloc_size passed into napi_build_skb(). The size needs to be aligned properly for better performance and atomic operations. Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic operations may panic on the skb_shinfo(skb)->dataref due to alignment fault. To fix this bug, add proper alignment to the alloc_size calculation. Sample panic info: [ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce [ 253.300900] Mem abort info: [ 253.301760] ESR = 0x0000000096000021 [ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits [ 253.304268] SET = 0, FnV = 0 [ 253.305172] EA = 0, S1PTW = 0 [ 253.306103] FSC = 0x21: alignment fault Call trace: __skb_clone+0xfc/0x198 skb_clone+0x78/0xe0 raw6_local_deliver+0xfc/0x228 ip6_protocol_deliver_rcu+0x80/0x500 ip6_input_finish+0x48/0x80 ip6_input+0x48/0xc0 ip6_sublist_rcv_finish+0x50/0x78 ip6_sublist_rcv+0x1cc/0x2b8 ipv6_list_rcv+0x100/0x150 __netif_receive_skb_list_core+0x180/0x220 netif_receive_skb_list_internal+0x198/0x2a8 __napi_poll+0x138/0x250 net_rx_action+0x148/0x330 handle_softirqs+0x12c/0x3a0 Cc: stable@vger.kernel.org Fixes: 80f6215b ("net: mana: Add support for jumbo frame") Signed-off-by:
-
Frank Li authored
Add missed property phys, which indicate how connect to serdes phy. Fix below warning: arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected) Signed-off-by:Frank Li <Frank.Li@nxp.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
David S. Miller authored
Pawel Dembicki says: ==================== net: dsa: vsc73xx: fix MDIO bus access and PHY opera This series are extracted patches from net-next series [0]. The VSC73xx driver has issues with PHY configuration. This patch series fixes most of them. The first patch synchronizes the register configuration routine with the datasheet recommendations. Patches 2-3 restore proper communication on the MDIO bus. Currently, the write value isn't sent to the MDIO register, and without a busy check, communication with the PHY can be interrupted. This causes the PHY to receive improper configuration and autonegotiation could fail. The fourth patch removes the PHY reset blockade, as it is no longer required. After fixing the MDIO operations, autonegotiation became possible. The last patch removes the blockade, which became unnecessary after the MDIO operations fix. [0] https://patchwork.kernel.org/project/netdevbpf/list/?series=874739&state=%2A&archive=both ==================== Signed-off-by:
-
Pawel Dembicki authored
When the vsc73xx mdio bus work properly, the generic autonegotiation configuration works well. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by:
-
Pawel Dembicki authored
Resetting the VSC73xx PHY was problematic because the MDIO bus, without a busy check, read and wrote incorrect register values. My investigation indicates that resetting the PHY only triggers changes in configuration. However, improper register values written earlier were only exposed after a soft reset. The reset itself wasn't the issue; rather, the problem stemmed from incorrect read and write operations. A 'soft_reset' can now proceed normally. There are no reasons to keep the VSC73xx from being reset. This commit removes the reset blockade in the 'vsc73xx_phy_write' function. Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
Pawel Dembicki authored
The VSC73xx has a busy flag used during MDIO operations. It is raised when MDIO read/write operations are in progress. Without it, PHYs are misconfigured and bus operations do not work as expected. Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver") Reviewed-by:
-
Pawel Dembicki authored
In the 'vsc73xx_phy_write' function, the register value is missing, and the phy write operation always sends zeros. This commit passes the value variable into the proper register. Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver") Reviewed-by:
-
Pawel Dembicki authored
According to the datasheet description ("Port Mode Procedure" in 5.6.2), the VSC73XX_MAC_CFG_WEXC_DIS bit is configured only for half duplex mode. The WEXC_DIS bit is responsible for MAC behavior after an excessive collision. Let's set it as described in the datasheet. Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver") Reviewed-by: -
Radhey Shyam Pandey authored
In axiethernet header fix register defines comment description to be inline with IP documentation. It updates MAC configuration register, MDIO configuration register and frame filter control description. Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Dan Carpenter authored
We can't dereference "skb" after calling vcc->push() because the skb is released. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
-
- 11 Aug, 2024 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-qDavid S. Miller authored
ueue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-08-07 (igc) This series contains updates to igc driver only. Faizal adjusts the size of the MAC internal buffer on i226 devices to resolve an errata for leaking packet transmits. He also corrects a condition in which qbv_config_change_errors are incorrectly counted. Lastly, he adjusts the conditions for resetting the adapter when changing TSN Tx mode and corrects the conditions in which gtxoffset register is set. ==================== Signed-off-by: -
Moon Yeounsu authored
`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)` Therefore, we should use a well-defined function not a bit shift to find the header length. It also compresses two lines to a single line. Signed-off-by:
Moon Yeounsu <yyyynoom@gmail.com> Reviewed-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 10 Aug, 2024 11 commits
-
-
Jakub Kicinski authored
Tariq Toukan says: ==================== mlx5 misc fixes 2024-08-08 This patchset provides misc bug fixes from the team to the mlx5 core and Eth drivers. ==================== Link: https://patch.msgid.link/20240808144107.2095424-1-tariqt@nvidia.comSigned-off-by:
-
Gal Pressman authored
The queue stats API queries the queues according to the real_num_[tr]x_queues, in case the device is down and channels were not yet created, don't try to query their statistics. To trigger the panic, run this command before the interface is brought up: ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml --dump qstats-get --json '{"ifindex": 4}' BUG: kernel NULL pointer dereference, address: 0000000000000c00 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 977 Comm: python3 Not tainted 6.10.0+ #40 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_get_queue_stats_rx+0x3c/0xb0 [mlx5_core] Code: fc 55 48 63 ee 53 48 89 d3 e8 40 3d 70 e1 85 c0 74 58 4c 89 ef e8 d4 07 04 00 84 c0 75 41 49 8b 84 24 f8 39 00 00 48 8b 04 e8 <48> 8b 90 00 0c 00 00 48 03 90 40 0a 00 00 48 89 53 08 48 8b 90 08 RSP: 0018:ffff888116be37d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888116be3868 RCX: 0000000000000004 RDX: ffff88810ada4000 RSI: 0000000000000000 RDI: ffff888109df09c0 RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000004 R10: ffff88813461901c R11: ffffffffffffffff R12: ffff888109df0000 R13: ffff888109df09c0 R14: ffff888116be38d0 R15: 0000000000000000 FS: 00007f4375d5c740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000c00 CR3: 0000000106ada006 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x14e/0x3d0 ? exc_page_fault+0x73/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5e_get_queue_stats_rx+0x3c/0xb0 [mlx5_core] netdev_nl_stats_by_netdev+0x2a6/0x4c0 ? __rmqueue_pcplist+0x351/0x6f0 netdev_nl_qstats_get_dumpit+0xc4/0x1b0 genl_dumpit+0x2d/0x80 netlink_dump+0x199/0x410 __netlink_dump_start+0x1aa/0x2c0 genl_family_rcv_msg_dumpit+0x94/0xf0 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 genl_rcv_msg+0x116/0x2b0 ? __pfx_netdev_nl_qstats_get_dumpit+0x10/0x10 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x21a/0x340 netlink_sendmsg+0x1f4/0x440 __sys_sendto+0x1b6/0x1c0 ? do_sock_setsockopt+0xc3/0x180 ? __sys_setsockopt+0x60/0xb0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f43757132b0 Code: c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 1d 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 68 c3 0f 1f 80 00 00 00 00 41 54 48 83 ec 20 RSP: 002b:00007ffd258da048 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffd258da0f8 RCX: 00007f43757132b0 RDX: 000000000000001c RSI: 00007f437464b850 RDI: 0000000000000003 RBP: 00007f4375085de0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f43751a6147 </TASK> Modules linked in: netconsole xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core zram zsmalloc mlx5_core fuse [last unloaded: netconsole] CR2: 0000000000000c00 ---[ end trace 0000000000000000 ]--- RIP: 0010:mlx5e_get_queue_stats_rx+0x3c/0xb0 [mlx5_core] Code: fc 55 48 63 ee 53 48 89 d3 e8 40 3d 70 e1 85 c0 74 58 4c 89 ef e8 d4 07 04 00 84 c0 75 41 49 8b 84 24 f8 39 00 00 48 8b 04 e8 <48> 8b 90 00 0c 00 00 48 03 90 40 0a 00 00 48 89 53 08 48 8b 90 08 RSP: 0018:ffff888116be37d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888116be3868 RCX: 0000000000000004 RDX: ffff88810ada4000 RSI: 0000000000000000 RDI: ffff888109df09c0 RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000004 R10: ffff88813461901c R11: ffffffffffffffff R12: ffff888109df0000 R13: ffff888109df09c0 R14: ffff888116be38d0 R15: 0000000000000000 FS: 00007f4375d5c740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000c00 CR3: 0000000106ada006 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 7b66ae53 ("net/mlx5e: Add per queue netdev-genl stats") Signed-off-by:Gal Pressman <gal@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240808144107.2095424-6-tariqt@nvidia.comSigned-off-by:
-
Cosmin Ratiu authored
Previously, an ethtool rx flow with no attrs would not be added to the NIC as it has no rules to configure the hw with, but it would be reported as successful to the caller (return code 0). This is confusing for the user as ethtool then reports "Added rule $num", but no rule was actually added. This change corrects that by instead reporting these wrong rules as -EINVAL. Fixes: b29c61da ("net/mlx5e: Ethtool steering flow validation refactoring") Signed-off-by:
Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by:
Saeed Mahameed <saeedm@nvidia.com> Reviewed-by:
Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by:
-
Dragos Tatulea authored
mlx5e_safe_reopen_channels() requires the state lock taken. The referenced changed in the Fixes tag removed the lock to fix another issue. This patch adds it back but at a later point (when calling mlx5e_safe_reopen_channels()) to avoid the deadlock referenced in the Fixes tag. Fixes: eab0da38 ("net/mlx5e: Fix possible deadlock on mlx5e_tx_timeout_work") Signed-off-by:
Breno Leitao <leitao@debian.org> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Dragos Tatulea authored
During latency tests (netperf TCP_RR) a 30% degradation of HW GRO vs SW GRO was observed. This is due to SHAMPO triggering timeout filler CQEs instead of delivering the CQE for the packet. Having a short timeout for SHAMPO doesn't bring any benefits as it is the driver that does the merging, not the hardware. On the contrary, it can have a negative impact: additional filler CQEs are generated due to the timeout. As there is no way to disable this timeout, this change sets it to the maximum value. Instead of using the packet_merge.timeout parameter which is also used for LRO, set the value directly when filling in the rest of the SHAMPO parameters in mlx5e_build_rq_param(). Fixes: 99be5617 ("net/mlx5e: SHAMPO, Re-enable HW-GRO") Signed-off-by:
-
Tariq Toukan authored
Unconditionally calling the MPIR query on BF separate mode yields the FW syndrome below [1]. Do not call it unless admin clearly specified the SD group, i.e. expressing the intention of using the multi-PF netdev feature. This fix covers cases not covered in commit fca3b479 ("net/mlx5: Do not query MPIR on embedded CPU function"). [1] mlx5_cmd_out_err:808:(pid 8267): ACCESS_REG(0x805) op_mod(0x1) failed, status bad system state(0x4), syndrome (0x685f19), err(-5) Fixes: 678eb448 ("net/mlx5: SD, Implement basic query and instantiation") Signed-off-by:
-
Jakub Kicinski authored
Jakub Sitnicki says: ==================== Don't take HW USO path when packets can't be checksummed by device This series addresses a recent regression report from syzbot [1]. After enabling UDP_SEGMENT for egress devices which don't support checksum offload [2], we need to tighten down the checks which let packets take the HW USO path. The fix consists of two parts: 1. don't let devices offer USO without checksum offload, and 2. force software USO fallback in presence of IPv6 extension headers. [1] https://lore.kernel.org/all/000000000000e1609a061d5330ce@google.com/ [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10154dbded6d6a2fecaebdfda206609de0f121a9 v3: https://lore.kernel.org/r/20240807-udp-gso-egress-from-tunnel-v3-0-8828d93c5b45@cloudflare.com v2: https://lore.kernel.org/r/20240801-udp-gso-egress-from-tunnel-v2-0-9a2af2f15d8d@cloudflare.com v1: https://lore.kernel.org/r/20240725-udp-gso-egress-from-tunnel-v1-0-5e5530ead524@cloudflare.com ==================== Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-0-f5c5b4149ab9@cloudflare.comSigned-off-by:
-
Jakub Sitnicki authored
After enabling UDP GSO for devices not offering checksum offload, we have hit a regression where a bad offload warning can be triggered when sending a datagram with IPv6 extension headers. Extend the UDP GSO IPv6 tests to cover this scenario. Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-3-f5c5b4149ab9@cloudflare.comSigned-off-by:
-
Jakub Sitnicki authored
In commit 10154dbd ("udp: Allow GSO transmit from devices with no checksum offload") we have intentionally allowed UDP GSO packets marked CHECKSUM_NONE to pass to the GSO stack, so that they can be segmented and checksummed by a software fallback when the egress device lacks these features. What was not taken into consideration is that a CHECKSUM_NONE skb can be handed over to the GSO stack also when the egress device advertises the tx-udp-segmentation / NETIF_F_GSO_UDP_L4 feature. This will happen when there are IPv6 extension headers present, which we check for in __ip6_append_data(). Syzbot has discovered this scenario, producing a warning as below: ip6tnl0: caps=(0x00000006401d7869, 0x00000006401d7869) WARNING: CPU: 0 PID: 5112 at net/core/dev.c:3293 skb_warn_bad_offload+0x166/0x1a0 net/core/dev.c:3291 Modules linked in: CPU: 0 PID: 5112 Comm: syz-executor391 Not tainted 6.10.0-rc7-syzkaller-01603-g80ab5445 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 RIP: 0010:skb_warn_bad_offload+0x166/0x1a0 net/core/dev.c:3291 [...] Call Trace: <TASK> __skb_gso_segment+0x3be/0x4c0 net/core/gso.c:127 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x585/0x1120 net/core/dev.c:3661 __dev_queue_xmit+0x17a4/0x3e90 net/core/dev.c:4415 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0xffa/0x1680 net/ipv6/ip6_output.c:137 ip6_finish_output+0x41e/0x810 net/ipv6/ip6_output.c:222 ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1958 udp_v6_send_skb+0xbf5/0x1870 net/ipv6/udp.c:1292 udpv6_sendmsg+0x23b3/0x3270 net/ipv6/udp.c:1588 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xef/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2585 ___sys_sendmsg net/socket.c:2639 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2725 __do_sys_sendmmsg net/socket.c:2754 [inline] __se_sys_sendmmsg net/socket.c:2751 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2751 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] </TASK> We are hitting the bad offload warning because when an egress device is capable of handling segmentation offload requested by skb_shinfo(skb)->gso_type, the chain of gso_segment callbacks won't produce any segment skbs and return NULL. See the skb_gso_ok() branch in {__udp,tcp,sctp}_gso_segment helpers. To fix it, force a fallback to software USO when processing a packet with IPv6 extension headers, since we don't know if these can checksummed by all devices which offer USO. Fixes: 10154dbd ("udp: Allow GSO transmit from devices with no checksum offload") Reported-by: syzbot+e15b7e15b8a751a91d9a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000e1609a061d5330ce@google.com/Reviewed-by:
-
Jakub Sitnicki authored
UDP segmentation offload inherently depends on checksum offload. It should not be possible to disable checksum offload while leaving USO enabled. Enforce this dependency in code. There is a single tx-udp-segmentation feature flag to indicate support for both IPv4/6, hence the devices wishing to support USO must offer checksum offload for both IP versions. Fixes: 10154dbd ("udp: Allow GSO transmit from devices with no checksum offload") Suggested-by:
Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by:
-
Eric Dumazet authored
syzbot/KMSAN reported use of uninit-value in get_dev_xmit() [1] We must make sure the IPv4 or Ipv6 header is pulled in skb->head before accessing fields in them. Use pskb_inet_may_pull() to fix this issue. [1] BUG: KMSAN: uninit-value in ipv6_pdp_find drivers/net/gtp.c:220 [inline] BUG: KMSAN: uninit-value in gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] BUG: KMSAN: uninit-value in gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 ipv6_pdp_find drivers/net/gtp.c:220 [inline] gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 __netdev_start_xmit include/linux/netdevice.h:4913 [inline] netdev_start_xmit include/linux/netdevice.h:4922 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x358c/0x5610 net/core/dev.c:4423 dev_queue_xmit include/linux/netdevice.h:3105 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3145 [inline] packet_sendmsg+0x90e3/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3994 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4080 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674 alloc_skb include/linux/skbuff.h:1320 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6526 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2815 packet_alloc_skb net/packet/af_packet.c:2994 [inline] packet_snd net/packet/af_packet.c:3088 [inline] packet_sendmsg+0x749c/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 7115 Comm: syz.1.515 Not tainted 6.11.0-rc1-syzkaller-00043-g94ede2a3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 Fixes: 999cb275 ("gtp: add IPv6 support") Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Harald Welte <laforge@gnumonks.org> Reviewed-by:
-
- 09 Aug, 2024 5 commits
-
-
Foster Snowhill authored
Apart from the standard "configurations", "interfaces" and "alternate interface settings" in USB, iOS devices also have a notion of "modes". In different modes, the device exposes a different set of available configurations. Depending on the iOS version, and depending on the current mode, the length and contents of the carrier state control message differs: * 1 byte (seen on iOS 4.2.1, 8.4): * 03: carrier off (mode 0) * 04: carrier on (mode 0) * 3 bytes (seen on iOS 10.3.4, 15.7.6): * 03 03 03: carrier off (mode 0) * 04 04 03: carrier on (mode 0) * 4 bytes (seen on iOS 16.5, 17.6): * 03 03 03 00: carrier off (mode 0) * 04 03 03 00: carrier off (mode 1) * 06 03 03 00: carrier off (mode 4) * 04 04 03 04: carrier on (mode 0 and 1) * 06 04 03 04: carrier on (mode 4) Before this change, the driver always used the first byte of the response to determine carrier state. From this larger sample, the first byte seems to indicate the number of available USB configurations in the current mode (with the exception of the default mode 0), and in some cases (namely mode 1 and 4) does not correlate with the carrier state. Previous logic erroneously counted `04 03 03 00` as "carrier on" and `06 04 03 04` as "carrier off" on iOS versions that support mode 1 and mode 4 respectively. Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for the ipheth driver. Check the second byte of the control message where possible, and fall back to checking the first byte on older iOS versions. Signed-off-by:Foster Snowhill <forst@pen.gy> Tested-by:
Georgi Valkov <gvalkov@gmail.com> Signed-off-by:
-
Foster Snowhill authored
RX callbacks can fail for multiple reasons: * Payload too short * Payload formatted incorrecly (e.g. bad NCM framing) * Lack of memory None of these should cause the driver to seize up. Make such failures non-critical and continue processing further incoming URBs. Signed-off-by:
-
Foster Snowhill authored
On iPhone 15 Pro Max one can observe periodic URBs with no payload on the "bulk in" (RX) endpoint. These don't seem to do anything meaningful. Reproduced on iOS 17.5.1 and 17.6. This behaviour isn't observed on iPhone 11 on the same iOS version. The nature of these zero-length URBs is so far unknown. Drop RX URBs with no payload. Signed-off-by:
-
Foster Snowhill authored
Rx URB length was already checked in ipheth_rcvbulk_callback_legacy() and ipheth_rcvbulk_callback_ncm(), depending on the current mode. The check in ipheth_rcvbulk_callback() was thus mostly a duplicate. The only place in ipheth_rcvbulk_callback() where we care about the URB length is for the initial control frame. These frames are always 4 bytes long. This has been checked as far back as iOS 4.2.1 on iPhone 3G. Remove the extraneous URB length check. For control frames, check for the specific 4-byte length instead. Signed-off-by:
-
Oliver Neukum authored
ipheth_sndbulk_callback() can submit carrier_work as a part of its error handling. That means that the driver must make sure that the work is cancelled after it has made sure that no more URB can terminate with an error condition. Hence the order of actions in ipheth_close() needs to be inverted. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
- 08 Aug, 2024 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth. Current release - regressions: - eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on older chips Current release - new code bugs: - ethtool: fix off-by-one error / kdoc contradicting the code for max RSS context IDs - Bluetooth: hci_qca: - QCA6390: fix support on non-DT platforms - QCA6390: don't call pwrseq_power_off() twice - fix a NULL-pointer derefence at shutdown - eth: ice: fix incorrect assigns of FEC counters Previous releases - regressions: - mptcp: fix handling endpoints with both 'signal' and 'subflow' flags set - virtio-net: fix changing ring count when vq IRQ coalescing not supported - eth: gve: fix use of netif_carrier_ok() during reconfig / reset Previous releases - always broken: - eth: idpf: fix bugs in queue re-allocation on reconfig / reset - ethtool: fix context creation with no parameters Misc: - linkwatch: use system_unbound_wq to ease RTNL contention" * tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits) net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897. ethtool: Fix context creation with no parameters net: ethtool: fix off-by-one error in max RSS context IDs net: pse-pd: tps23881: include missing bitfield.h header net: fec: Stop PPS on driver remove net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities l2tp: fix lockdep splat net: stmmac: dwmac4: fix PCS duplex mode decode idpf: fix UAFs when destroying the queues idpf: fix memleak in vport interrupt configuration idpf: fix memory leaks and crashes while performing a soft reset bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() net/smc: add the max value of fallback reason count Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor Bluetooth: l2cap: always unlock channel in l2cap_conless_channel() Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390 ice: Fix incorrect assigns of FEC counts ... -
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Have reading of event format files test if the metadata still exists. When a event is freed, a flag (EVENT_FILE_FL_FREED) in the metadata is set to state that it is to prevent any new references to it from happening while waiting for existing references to close. When the last reference closes, the metadata is freed. But the "format" was missing a check to this flag (along with some other files) that allowed new references to happen, and a use-after-free bug to occur. - Have the trace event meta data use the refcount infrastructure instead of relying on its own atomic counters. - Have tracefs inodes use alloc_inode_sb() for allocation instead of using kmem_cache_alloc() directly. - Have eventfs_create_dir() return an ERR_PTR instead of NULL as the callers expect a real object or an ERR_PTR. - Have release_ei() use call_srcu() and not call_rcu() as all the protection is on SRCU and not RCU. - Fix ftrace_graph_ret_addr() to use the task passed in and not current. - Fix overflow bug in get_free_elt() where the counter can overflow the integer and cause an infinite loop. - Remove unused function ring_buffer_nr_pages() - Have tracefs freeing use the inode RCU infrastructure instead of creating its own. When the kernel had randomize structure fields enabled, the rcu field of the tracefs_inode was overlapping the rcu field of the inode structure, and corrupting it. Instead, use the destroy_inode() callback to do the initial cleanup of the code, and then have free_inode() free it. * tag 'trace-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracefs: Use generic inode RCU for synchronizing freeing ring-buffer: Remove unused function ring_buffer_nr_pages() tracing: Fix overflow in get_free_elt() function_graph: Fix the ret_stack used by ftrace_graph_ret_addr() eventfs: Use SRCU for freeing eventfs_inodes eventfs: Don't return NULL in eventfs_create_dir() tracefs: Fix inode allocation tracing: Use refcount for trace_event_file reference counter tracing: Have format file honor EVENT_FILE_FL_FREED
-
git://evilpiepirate.org/bcachefsLinus Torvalds authored
Pull bcachefs fixes from Kent Overstreet: "Assorted little stuff: - lockdep fixup for lockdep_set_notrack_class() - we can now remove a device when using erasure coding without deadlocking, though we still hit other issues - the 'allocator stuck' timeout is now configurable, and messages are ratelimited. The default timeout has been increased from 10 seconds to 30" * tag 'bcachefs-2024-08-08' of git://evilpiepirate.org/bcachefs: bcachefs: Use bch2_wait_on_allocator() in btree node alloc path bcachefs: Make allocator stuck timeout configurable, ratelimit messages bcachefs: Add missing path_traverse() to btree_iter_next_node() bcachefs: ec should not allocate from ro devs bcachefs: Improved allocator debugging for ec bcachefs: Add missing bch2_trans_begin() call bcachefs: Add a comment for bucket helper types bcachefs: Don't rely on implicit unsigned -> signed integer conversion lockdep: Fix lockdep_set_notrack_class() for CONFIG_LOCK_STAT bcachefs: Fix double free of ca->buckets_nouse
-
