- 09 Jun, 2014 1 commit
-
-
Nicolin Chen authored
We should not copy the return value into this val since it's supposed to get the value of the register not the success result of regmap_read(). Thus fix it. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
- 03 Jun, 2014 15 commits
-
-
Stephen Warren authored
This is the same change as commit fb6b8e71 "ASoC: tegra: free jack GPIOs before the sound card is freed", but applied to all other ASoC machine drivers where code inspection indicates the same problem exists. That commit's description is: ========== snd_soc_jack_add_gpios() schedules a work queue item to poll the GPIO to generate an initial jack status report. If sound card initialization fails, that work item needs to be cancelled, so it doesn't run after the card has been freed. Specifically, freeing the card calls snd_jack_dev_free() which calls snd_jack_dev_disconnect() which sets jack->input_dev = NULL, and input_dev is used by snd_jack_report(), which is called from the work queue item. snd_soc_jack_free_gpios() cancels the work item. The Tegra ASoC machine drivers do call this function in the platform driver remove() callback. However, this happens after the sound card is freed, at least when the card is freed due to errors late during snd_soc_instantiate_card(). This leaves a window where the work item can execute after the card is freed. In next-20140522, sound card initialization does fail for unrelated reasons, and hits the problem described above. To solve this, fix the Tegra ASoC machine drivers to clean up the Jack GPIOs during the snd_soc_card's .remove() callback, which is executed before the overall card object is freed. also, guard the cleanup call based on whether we actually setup up the GPIOs in the first place. Ideally, we'd do the cleanup in a struct snd_soc_dai_link .fini/remove function to match where the GPIOs get set up. However, there is no such callback. ========== Note that I have not even compile-tested this in most cases, since most of the drivers rely on specific mach-* support I don't have enabled, and don't support COMPILE_TEST. Testing by the relevant board maintainers would be useful. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/simple' and 'asoc/topic/sirf' into asoc-next
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
- 02 Jun, 2014 1 commit
-
-
Mark Brown authored
It is not an error to have no cache so we shouldn't return an error code and cause our callers to fail, just silently do nothing instead. Thanks to Jarkko for identify the problematic commit. Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reported-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
- 01 Jun, 2014 23 commits
-
-
Oder Chiou authored
This patch adds the Realtek ALC5677 codec driver. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@linaro.org>
-
Oder Chiou authored
The patch adds the function "get_clk_info" to RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Oder Chiou authored
The patch adds the function of the PLL clock calculation to RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Oder Chiou authored
The patch adds the RL6231 class device shared support for RT5640, RT5645 and RT5651. The function of the DMIC clock calculation can be shared by RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Mark Brown authored
Merge branches 'topic/rt5640', 'topic/rt5645' and 'topic/rt5651' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rl6231
-
Xiubo Li authored
Since we cannot make sure the 'reg_size' will always be none zero here, and then if 'reg_size' equals to zero, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the 'reg_size' zero check before calling kzalloc(). Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Lars-Peter Clausen authored
This is useful if we have a pointer to a DAPM context and know that it is a CODEC or platform DAPM context and want to get a pointer to the CODEC or platform. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Mark Brown authored
Merge branch 'topic/fsl' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-fsl-ssi Conflicts: sound/soc/fsl/Kconfig
-
Matt Reimer authored
The mono output PGA input only has four possible sources, so omit the rest. Signed-off-by: Matt Reimer <mreimer@sdgsystems.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Alexander Shiyan authored
Eukrea-i.MX51 board was converted to use DT, ie we no longer have a MACH_EUKREA_MBIMXSD51_BASEBOARD symbol. Transformation of other boards planned for the near future, so this patch removes all these dependencies and restricts build of this driver to ARCH_MXC. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Markus Pargmann authored
This patch replaces the ssi specific functions write_ssi, read_ssi and write_ssi_mask by standard regmap function calls. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Markus Pargmann authored
Reorder all variables in struct fsl_ssi_private to have groups that make sense together. The patch also updates the struct documentation. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Markus Pargmann authored
The baudclock may be used and set by different streams. Allow only the first stream to set the bitclock rate. Other streams have to try to get to the correct rate without modifying the bitclock rate using the SSI internal clock modifiers. The variable baudclk_streams is introduced to keep track of the active streams that are using the baudclock. This way we know if the baudclock may be set and whether we may enable/disable the clock. baudclock enable/disable is moved to hw_params()/hw_free(). This way we can keep track of the baudclock in those two functions and avoid a running clock while it is not used. As hw_params()/hw_free() may be called multiple times for the same stream, we have to use baudclk_streams variable to know whether we may enable/disable the clock. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Sascha Hauer authored
In i2s master mode the fsl_ssi driver depends on someone calling .set_tdm_slot correctly. In this mode though only a DC value of 2 is allowed, so set it in this case and no longer depend on .set_tdm_slot. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Sascha Hauer authored
The baudclock_locked variable is only used in functions which are serialized anyway from the core. No need to have a lock around the variable, so remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Sascha Hauer authored
The fsl_ssi driver uses the .set_sysclk callback to configure the bitclock for master mode. This is unnecessary since the bitclock is known in hw_params. This patch configures the bitclock from .hw_params. .set_dai_sysclk now sets a bitclock frequency which is preferred over the default calculated bitclock frequency. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Markus Pargmann authored
The simple soundcard binding has its own way for specifying the dai format. To be able to use this binding we have to make the fsl,mode property optional. As the property is used in existing devicetrees keep the option around for compatibility reasons. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Sascha Hauer authored
Introduce a SoC data struct which contains the differences between the different SoCs this driver supports. This makes it easy to support more differences without having to introduce a new switch/case each time. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Jarkko Nikula authored
Use card PM ops from ASoC core instead of defining custom PM ops here since we are calling anyway common suspend/resume callbacks. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Jarkko Nikula authored
Simplify byt-rt5640.c and haswell.c machine drivers by using devm_snd_soc_register_card(). Remove also needless dev_set_drvdata() from byt_rt5640_probe() since snd_soc_register_card() does it too. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Andy Shevchenko authored
A few files contain duplicate headers. This patch removes the second entry of duplicate in each file under question. There is no functional changes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Jarkko Nikula authored
Stored DSP DMA pointer must be cleared before starting the stream since PCM pointer callback sst_byt_pcm_pointer() can be called before pointer is updated. In that case last position of previous stream was wronly returned. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-