- 23 Mar, 2015 11 commits
-
-
Nicolas Ferre authored
The color arrangement for SAMA5D4 in RGB 666 takes the most significant bits of each color line groups. Signed-off-by:Nicolas Ferre <nicolas.ferre@atmel.com>
-
Boris Brezillon authored
Add HLCDC node. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Boris Brezillon authored
Add LCDC pin definitions. Signed-off-by:
-
Nicolas Ferre authored
Signed-off-by: -
Nicolas Ferre authored
Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com>
-
Boris Brezillon authored
Define the HLCDC (HLCD Controller) IP available on some sama5d3 SoCs (i.e. sama5d31, sama5d33, sama5d34 and sama5d36) in sama5d3 dtsi file. Signed-off-by:
Anthony Harivel <anthony.harivel@emtrion.de> Signed-off-by:
-
Boris Brezillon authored
Define alternative pin muxing for the LCDC pins. Signed-off-by:
-
Boris Brezillon authored
The HLCDC (HLCD Controller) IP supports 4 different output mode (RGB444, RGB565, RGB666 and RGB888) and the pin muxing will depend on the chosen RGB mode. Split pin definitions to be able to set pin config according to the selected mode. Signed-off-by:
-
Nicolas Ferre authored
Signed-off-by: -
Nicolas Ferre authored
Enable RTC for all the at91sam9x5 CPU Modules: this will enable it for all the EK boards. Signed-off-by: -
Alexander Stein authored
This drivers allows a fixed framebuffer memory to be set by an additional IORESOURCE_MEM resource. Thus add an example to the DT documentation. Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by:
-
- 04 Mar, 2015 26 commits
-
-
Josh Wu authored
Add ISI dt node and pinctrl settings in sama5d4.dtsi. Signed-off-by:
Josh Wu <josh.wu@atmel.com> [nicolas.ferre@atmel.com: sort nodes in order. remove useless comments] Signed-off-by:
-
Bo Shen authored
Signed-off-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
-
Leilei Zhao authored
Signed-off-by:
Leilei Zhao <leilei.zhao@atmel.com> Signed-off-by:
-
Bo Shen authored
Enable audio support for sama5d4ek board. Signed-off-by:
-
Bo Shen authored
Add wm8904 codec node and enable it. Signed-off-by:
-
Bo Shen authored
Enable SSC0 node, which will be used for audio. Signed-off-by:
-
Bo Shen authored
Add SSC 0 and 1 nodes. Signed-off-by:
-
Nicolas Ferre authored
Add i2c0 aka twi0 on sama5d4 xplained board. Signed-off-by: -
Josh Wu authored
Add at91 sama5d4 xplained board support. Signed-off-by:
-
Josh Wu authored
macb0 DT node can have phy child nodes, so add the #{address, size}_cells for macb0 node. Signed-off-by: -
Josh Wu authored
Add the leds DT node in the dts file. In the leds, d10 is set as heartbeat led. Signed-off-by:
-
Philip Attfield authored
Add alias, node declaration and pinctrl for i2c1 (aka: twi1). Signed-off-by:
Philip Attfield <phil.attfield@seqlabs.com> Signed-off-by:
-
Nicolas Ferre authored
Gpio-keys nodes are not using the "reg" property in their sub nodes. So, there is no need to define #address-cells and #size-cells properties in gpio-keys nodes: we remove them in these new boards. Signed-off-by: -
Wenyou Yang authored
Signed-off-by:
Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by:
-
Nicolas Ferre authored
File name had at91 prefix, which is not the case anymore for SAMA5D3. AT91SAM9x5 was mentioned instead of SAMA5D3 SoC. Signed-off-by: -
Bo Shen authored
Enable usb device port on at91sam9n12ek board. Signed-off-by:
-
Bo Shen authored
Add usb device node for at91sam9n12. Signed-off-by:
-
Josh Wu authored
Enable ISI and ov2640 for at91sam9g25ek board. Meantime, we need to disable the mmc1 and spi0 as they have pin conflict with ISI. Signed-off-by:
-
Josh Wu authored
Add the camera sensor ov2640 dt support. And connect sensor to isi node as well. Signed-off-by:
-
Josh Wu authored
Add a new file: at91sam9x5_isi.dtsi, which includes ISI node and pinctrls. Signed-off-by:
-
Nicolas Ferre authored
First fixes batch for AT91 on 4.0: - PM slowclock fixes for DDR and timeouts - fix some DT entries - little defconfig updates - the removal of a harmful watchdog option + its detailed documentation
-
Michel Marti authored
Since turning on idle-halt in commit fe46aa67 (ARM: at91/dt: add sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt no longer reboot if the watchdog times out while the CPU is in idle state. Removing the 'idle-halt' flag that was set by default fixes this. Signed-off-by:
Michel Marti <mma@objectxp.com> Acked-by:
Sylvain Rochet <sylvain.rochet@finsecur.com> [nicolas.ferre@atmel.com: rework the commit message] Signed-off-by:
-
Sylvain Rochet authored
atmel,idle-halt property should be used with care, it actually makes the watchdog not counting when the CPU is in idle state, therefore the watchdog reset time depends on mean CPU usage and will not reset at all of the CPU stop working while it is in idle state, which is probably not what you want. Signed-off-by:
-
Alexandre Belloni authored
There is now only one defconfig for the at91rm9200 and at91sam9. Add ethernet support for the at91rm9200. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Anthony Harivel authored
Recent distributions and userspace tools after 2009/2010 depend on the existence of /sys/class/block/, and will not work with this option enabled. Signed-off-by:
-
Jonas Andersson authored
Corrected pins used by usart3. Signed-off-by:
Jonas Andersson <jonas@microbit.se> Acked-by:
-
- 03 Mar, 2015 3 commits
-
-
Nicolas Ferre authored
Signed-off-by: -
Alexander Stein authored
Commit ff04660e48b20 ("ARM: at91/dt: add SRAM nodes") used the same base address for sram0 and sram1 leading to the following warning: WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x50/0x70() sysfs: cannot create duplicate filename '/devices/platform/300000.sram' Fix the base address for sram1. Signed-off-by:Alexander Stein <alexanders83@web.de> Acked-by:
-
Alexandre Belloni authored
On some platforms, there are multiple SRAM nodes defined in the device tree but some of them are disabled, leading to allocation failure. Try to find the first enabled SRAM node and allocate from it. Signed-off-by:
-
