Pull tracing fixes from Steven Rostedt:
 "Three tracing fixes:

   - Use "nosteal" for ring buffer splice pages

   - Memory leak fix in error path of trace_pid_write()

   - Fix preempt_enable_no_resched() (use preempt_enable()) in ring
     buffer code"

* tag 'trace-v5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  trace: Fix preempt_enable_no_resched() abuse
  tracing: Fix a memory leak by early error exit in trace_pid_write()
  tracing: Fix buffer_ref pipe ops

Pull GPIO fixes from Linus Walleij:
 "Not much to say about them, regular fixes:

   - Fix a bug on the errorpath of gpiochip_add_data_with_key()

   - IRQ type setting on the spreadtrum GPIO driver"

* tag 'gpio-v5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: Fix gpiochip_add_data_with_key() error path
  gpio: eic: sprd: Fix incorrect irq type setting for the sync EIC

Pull drm fixes from Dave Airlie:
 "Regular drm fixes, nothing too outstanding, I'm guessing Easter was
  slowing people down.

  i915:
   - FEC enable fix
   - BXT display lanes fix

  ttm:
   - fix reinit for reloading drivers regression

  imx:
   - DP CSC fix

  sun4i:
   - module unload/load fix

  vc4:
   - memory leak fix
   - compile fix

  dw-hdmi:
   - rockchip scdc overflow fix

  sched:
   - docs fix

  vmwgfx:
   - dma api layering fix"

* tag 'drm-fixes-2019-04-26' of git://anongit.freedesktop.org/drm/drm:
  drm/bridge: dw-hdmi: fix SCDC configuration for ddc-i2c-bus
  drm/vmwgfx: Fix dma API layer violation
  drm/vc4: Fix compilation error reported by kbuild test bot
  drm/sun4i: Unbind components before releasing DRM and memory
  drm/vc4: Fix memory leak during gpu reset.
  drm/sched: Fix description of drm_sched_stop
  drm/imx: don't skip DP channel disable for background plane
  gpu: ipu-v3: dp: fix CSC handling
  drm/ttm: fix re-init of global structures
  drm/sun4i: Fix component unbinding and component master deletion
  drm/sun4i: Set device driver data at bind time for use in unbind
  drm/sun4i: Add missing drm_atomic_helper_shutdown at driver unbind
  drm/i915: Restore correct bxt_ddi_phy_calc_lane_lat_optim_mask() calculation
  drm/i915: Do not enable FEC without DSC
  drm: bridge: dw-hdmi: Fix overflow workaround for Rockchip SoCs

Pull btrfs fix from David Sterba:
 "One patch to fix a crash in io submission path, due to memory
  allocation errors.

  In short, the multipage bio work that landed in 5.1 caused larger bios
  that in turn require larger temporary memory for checksums. The patch
  is a workaround, we're going to rework the allocation so it does not
  require the vmalloc fallback.

  It took a while to identify that it's caused by patches in 5.1 and not
  a patchset that did some changes in error handling in the code. I've
  tested it on various memory/cpu combinations, it could hit OOM but
  does not crash.

  The timestamp of the patch is less than a day due to updates in the
  changelog, tests were running meanwhile"

* tag 'for-5.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Switch memory allocations in async csum calculation path to kvmalloc

Pull cifs fixes from Steve French:
 "Three small SMB3 fixes (all for stable as well): two leaks and a
  rename bug"

* tag '5.1-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix page reference leak with readv/writev
  cifs: do not attempt cifs operation on smb2+ rename error
  cifs: fix memory leak in SMB2_read

Unless the very next line is schedule(), or implies it, one must not use
preempt_enable_no_resched(). It can cause a preemption to go missing and
thereby cause arbitrary delays, breaking the PREEMPT=y invariant.

Link: http://lkml.kernel.org/r/20190423200318.GY14281@hirez.programming.kicks-ass.net

Cc: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: stable@vger.kernel.org
Fixes: 2c2d7329 ("tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

In trace_pid_write(), the buffer for trace parser is allocated through
kmalloc() in trace_parser_get_init(). Later on, after the buffer is used,
it is then freed through kfree() in trace_parser_put(). However, it is
possible that trace_pid_write() is terminated due to unexpected errors,
e.g., ENOMEM. In that case, the allocated buffer will not be freed, which
is a memory leak bug.

To fix this issue, free the allocated buffer when an error is encountered.

Link: http://lkml.kernel.org/r/1555726979-15633-1-git-send-email-wang6495@umn.edu

Fixes: f4d34a87 ("tracing: Use pid bitmap instead of a pid array for set_event_pid")
Cc: stable@vger.kernel.org
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

This fixes multiple issues in buffer_pipe_buf_ops:

 - The ->steal() handler must not return zero unless the pipe buffer has
   the only reference to the page. But generic_pipe_buf_steal() assumes
   that every reference to the pipe is tracked by the page's refcount,
   which isn't true for these buffers - buffer_pipe_buf_get(), which
   duplicates a buffer, doesn't touch the page's refcount.
   Fix it by using generic_pipe_buf_nosteal(), which refuses every
   attempted theft. It should be easy to actually support ->steal, but the
   only current users of pipe_buf_steal() are the virtio console and FUSE,
   and they also only use it as an optimization. So it's probably not worth
   the effort.
 - The ->get() and ->release() handlers can be invoked concurrently on pipe
   buffers backed by the same struct buffer_ref. Make them safe against
   concurrency by using refcount_t.
 - The pointers stored in ->private were only zeroed out when the last
   reference to the buffer_ref was dropped. As far as I know, this
   shouldn't be necessary anyway, but if we do it, let's always do it.

Link: http://lkml.kernel.org/r/20190404215925.253531-1-jannh@google.com

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Fixes: 73a757e6 ("ring-buffer: Return reader page back into existing ring buffer")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

drm/imx: fix DP CSC handling

- Fix the DP color space conversion matrix setup to avoid bugs where
  disabling the overlay plane while both primary and overlay plane are
  routed via the CSC unit would not reconfigure the CSC routing
  properly, leaving the display in a nonworking state, or the CSC
  setting from a previously set mode would be left behind, causing
  wrong colors when reenabling the display in certain configurations.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1556183136.2271.3.camel@pengutronix.de

A single fix for a layer violation requested by Cristoph.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425204100.3982-1-thellstrom@vmware.com

- sun4i: Fix module loading / unloading
- vc4: Fix a compilation error and memory leak
- dw-hdmi: Fix an overflow on Rockchip and SCDC configuration
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425132739.pngmfiqucqmulxkz@flea

- ttm regression fix
- sched documentation fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424230120.3423-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

A fix for display lanes calculation for BXT and a protection
to avoid enabling FEC without DSC.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424215359.GA26100@intel.com

Pull ceph fixes from Ilya Dryomov:
 "dentry name handling fixes from Jeff and a memory leak fix from Zheng.

  Both are old issues, marked for stable"

* tag 'ceph-for-5.1-rc7' of git://github.com/ceph/ceph-client:
  ceph: fix ci->i_head_snapc leak
  ceph: handle the case where a dentry has been renamed on outstanding req
  ceph: ensure d_name stability in ceph_dentry_hash()
  ceph: only use d_name directly when parent is locked

Pull crypto fixes from Herbert Xu:
 "This fixes a bug in xts and lrw where they may sleep in an atomic
  context"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: lrw - Fix atomic sleep when walking skcipher
  crypto: xts - Fix atomic sleep when walking skcipher

Recent multi-page biovec rework allowed creation of bios that can span
large regions - up to 128 megabytes in the case of btrfs. OTOH btrfs'
submission path currently allocates a contiguous array to store the
checksums for every bio submitted. This means we can request up to
(128mb / BTRFS_SECTOR_SIZE) * 4 bytes + 32bytes of memory from kmalloc.
On busy systems with possibly fragmented memory said kmalloc can fail
which will trigger BUG_ON due to improper error handling IO submission
context in btrfs.

Until error handling is improved or bios in btrfs limited to a more
manageable size (e.g. 1m) let's use kvmalloc to fallback to vmalloc for
such large allocations. There is no hard requirement that the memory
allocated for checksums during IO submission has to be contiguous, but
this is a simple fix that does not require several non-contiguous
allocations.

For small writes this is unlikely to have any visible effect since
kmalloc will still satisfy allocation requests as usual. For larger
requests the code will just fallback to vmalloc.

We've performed evaluation on several workload types and there was no
significant difference kmalloc vs kvmalloc.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When ddc-i2c-bus property is used, a NULL pointer dereference is reported:

[   31.041669] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[   31.041671] pgd = 4d3c16f6
[   31.041673] [00000008] *pgd=00000000
[   31.041678] Internal error: Oops: 5 [#1] SMP ARM

[   31.041711] Hardware name: Rockchip (Device Tree)
[   31.041718] PC is at i2c_transfer+0x8/0xe4
[   31.041721] LR is at drm_scdc_read+0x54/0x84
[   31.041723] pc : [<c073273c>]    lr : [<c05926c4>]    psr: 280f0013
[   31.041725] sp : edffdad0  ip : 5ccb5511  fp : 00000058
[   31.041727] r10: 00000780  r9 : edf91608  r8 : c11b0f48
[   31.041728] r7 : 00000438  r6 : 00000000  r5 : 00000000  r4 : 00000000
[   31.041730] r3 : edffdae7  r2 : 00000002  r1 : edffdaec  r0 : 00000000

[   31.041908] [<c073273c>] (i2c_transfer) from [<c05926c4>] (drm_scdc_read+0x54/0x84)
[   31.041913] [<c05926c4>] (drm_scdc_read) from [<c0592858>] (drm_scdc_set_scrambling+0x30/0xbc)
[   31.041919] [<c0592858>] (drm_scdc_set_scrambling) from [<c05cc0f4>] (dw_hdmi_update_power+0x1440/0x1610)
[   31.041926] [<c05cc0f4>] (dw_hdmi_update_power) from [<c05cc574>] (dw_hdmi_bridge_enable+0x2c/0x70)
[   31.041932] [<c05cc574>] (dw_hdmi_bridge_enable) from [<c05aed48>] (drm_bridge_enable+0x24/0x34)
[   31.041938] [<c05aed48>] (drm_bridge_enable) from [<c0591060>] (drm_atomic_helper_commit_modeset_enables+0x114/0x220)
[   31.041943] [<c0591060>] (drm_atomic_helper_commit_modeset_enables) from [<c05c3fe0>] (rockchip_atomic_helper_commit_tail_rpm+0x28/0x64)

hdmi->i2c may not be set when ddc-i2c-bus property is used in device tree.
Fix this by using hdmi->ddc as the i2c adapter when calling drm_scdc_*().
Also report that SCDC is not supported when there is no DDC bus.

Fixes: 264fce6c ("drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/VE1PR03MB59031814B5BCAB2152923BDAAC210@VE1PR03MB5903.eurprd03.prod.outlook.com

The err_remove_chip block is too coarse, and may perform cleanup that
must not be done.  E.g. if of_gpiochip_add() fails, of_gpiochip_remove()
is still called, causing:

    OF: ERROR: Bad of_node_put() on /soc/gpio@e6050000
    CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted 5.1.0-rc2-koelsch+ #407
    Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
    Workqueue: events deferred_probe_work_func
    [<c020ec74>] (unwind_backtrace) from [<c020ae58>] (show_stack+0x10/0x14)
    [<c020ae58>] (show_stack) from [<c07c1224>] (dump_stack+0x7c/0x9c)
    [<c07c1224>] (dump_stack) from [<c07c5a80>] (kobject_put+0x94/0xbc)
    [<c07c5a80>] (kobject_put) from [<c0470420>] (gpiochip_add_data_with_key+0x8d8/0xa3c)
    [<c0470420>] (gpiochip_add_data_with_key) from [<c0473738>] (gpio_rcar_probe+0x1d4/0x314)
    [<c0473738>] (gpio_rcar_probe) from [<c052fca8>] (platform_drv_probe+0x48/0x94)

and later, if a GPIO consumer tries to use a GPIO from a failed
controller:

    WARNING: CPU: 0 PID: 1 at lib/refcount.c:156 kobject_get+0x38/0x4c
    refcount_t: increment on 0; use-after-free.
    Modules linked in:
    CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.1.0-rc2-koelsch+ #407
    Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
    [<c020ec74>] (unwind_backtrace) from [<c020ae58>] (show_stack+0x10/0x14)
    [<c020ae58>] (show_stack) from [<c07c1224>] (dump_stack+0x7c/0x9c)
    [<c07c1224>] (dump_stack) from [<c0221580>] (__warn+0xd0/0xec)
    [<c0221580>] (__warn) from [<c02215e0>] (warn_slowpath_fmt+0x44/0x6c)
    [<c02215e0>] (warn_slowpath_fmt) from [<c07c58fc>] (kobject_get+0x38/0x4c)
    [<c07c58fc>] (kobject_get) from [<c068b3ec>] (of_node_get+0x14/0x1c)
    [<c068b3ec>] (of_node_get) from [<c0686f24>] (of_find_node_by_phandle+0xc0/0xf0)
    [<c0686f24>] (of_find_node_by_phandle) from [<c0686fbc>] (of_phandle_iterator_next+0x68/0x154)
    [<c0686fbc>] (of_phandle_iterator_next) from [<c0687fe4>] (__of_parse_phandle_with_args+0x40/0xd0)
    [<c0687fe4>] (__of_parse_phandle_with_args) from [<c0688204>] (of_parse_phandle_with_args_map+0x100/0x3ac)
    [<c0688204>] (of_parse_phandle_with_args_map) from [<c0471240>] (of_get_named_gpiod_flags+0x38/0x380)
    [<c0471240>] (of_get_named_gpiod_flags) from [<c046f864>] (gpiod_get_from_of_node+0x24/0xd8)
    [<c046f864>] (gpiod_get_from_of_node) from [<c0470aa4>] (devm_fwnode_get_index_gpiod_from_child+0xa0/0x144)
    [<c0470aa4>] (devm_fwnode_get_index_gpiod_from_child) from [<c05f425c>] (gpio_keys_probe+0x418/0x7bc)
    [<c05f425c>] (gpio_keys_probe) from [<c052fca8>] (platform_drv_probe+0x48/0x94)

Fix this by splitting the cleanup block, and adding a missing call to
gpiochip_irqchip_remove().

Fixes: 28355f81 ("gpio: defer probe if pinctrl cannot be found")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Remove the check for IOMMU presence since it was considered a
layer violation.
This means we have no reliable way to destinguish between coherent
hardware IOMMU DMA address translations and incoherent SWIOTLB DMA
address translations, which we can't handle. So always presume the
former. This means that if anybody forces SWIOTLB without also setting
the vmw_force_coherent=1 vmwgfx option, driver operation will fail,
like it will on most other graphics drivers.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Pull networking fixes from David Miller:
 "Just the usual assortment of small'ish fixes:

   1) Conntrack timeout is sometimes not initialized properly, from
      Alexander Potapenko.

   2) Add a reasonable range limit to tcp_min_rtt_wlen to avoid
      undefined behavior. From ZhangXiaoxu.

   3) des1 field of descriptor in stmmac driver is initialized with the
      wrong variable. From Yue Haibing.

   4) Increase mlxsw pci sw reset timeout a little bit more, from Ido
      Schimmel.

   5) Match IOT2000 stmmac devices more accurately, from Su Bao Cheng.

   6) Fallback refcount fix in TLS code, from Jakub Kicinski.

   7) Fix max MTU check when using XDP in mlx5, from Maxim Mikityanskiy.

   8) Fix recursive locking in team driver, from Hangbin Liu.

   9) Fix tls_set_device_offload_Rx() deadlock, from Jakub Kicinski.

  10) Don't use napi_alloc_frag() outside of softiq context of socionext
      driver, from Ilias Apalodimas.

  11) MAC address increment overflow in ncsi, from Tao Ren.

  12) Fix a regression in 8K/1M pool switching of RDS, from Zhu Yanjun.

  13) ipv4_link_failure has to validate the headers that are actually
      there because RAW sockets can pass in arbitrary garbage, from Eric
      Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  ipv4: add sanity checks in ipv4_link_failure()
  net/rose: fix unbound loop in rose_loopback_timer()
  rxrpc: fix race condition in rxrpc_input_packet()
  net: rds: exchange of 8K and 1M pool
  net: vrf: Fix operation not supported when set vrf mac
  net/ncsi: handle overflow when incrementing mac address
  net: socionext: replace napi_alloc_frag with the netdev variant on init
  net: atheros: fix spelling mistake "underun" -> "underrun"
  spi: ST ST95HF NFC: declare missing of table
  spi: Micrel eth switch: declare missing of table
  net: stmmac: move stmmac_check_ether_addr() to driver probe
  netfilter: fix nf_l4proto_log_invalid to log invalid packets
  netfilter: never get/set skb->tstamp
  netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON
  Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK
  dt-bindings: add an explanation for internal phy-mode
  net/tls: don't leak IV and record seq when offload fails
  net/tls: avoid potential deadlock in tls_set_device_offload_rx()
  selftests/net: correct the return value for run_afpackettests
  team: fix possible recursive locking when add slaves
  ...

Merge tag 'leds-for-5.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED update from Jacek Anaszewski:
 "A single change to MAINTAINERS:

  We announce a new LED reviewer - Dan Murphy"

* tag 'leds-for-5.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  MAINTAINERS: LEDs: Add designated reviewer for LED subsystem

Before calling __ip_options_compile(), we need to ensure the network
header is a an IPv4 one, and that it is already pulled in skb->head.

RAW sockets going through a tunnel can end up calling ipv4_link_failure()
with total garbage in the skb, or arbitrary lengthes.

syzbot report :

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline]
BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204

CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x38/0x50 mm/kasan/common.c:133
 memcpy include/linux/string.h:355 [inline]
 __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695
 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204
 dst_link_failure include/net/dst.h:427 [inline]
 vti6_xmit net/ipv6/ip6_vti.c:514 [inline]
 vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553
 __netdev_start_xmit include/linux/netdevice.h:4414 [inline]
 netdev_start_xmit include/linux/netdevice.h:4423 [inline]
 xmit_one net/core/dev.c:3292 [inline]
 dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308
 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878
 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911
 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527
 neigh_output include/net/neighbour.h:508 [inline]
 ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229
 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317
 NF_HOOK_COND include/linux/netfilter.h:278 [inline]
 ip_output+0x21f/0x670 net/ipv4/ip_output.c:405
 dst_output include/net/dst.h:444 [inline]
 NF_HOOK include/linux/netfilter.h:289 [inline]
 raw_send_hdrinc net/ipv4/raw.c:432 [inline]
 raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663
 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg+0xdd/0x130 net/socket.c:661
 sock_write_iter+0x27c/0x3e0 net/socket.c:988
 call_write_iter include/linux/fs.h:1866 [inline]
 new_sync_write+0x4c7/0x760 fs/read_write.c:474
 __vfs_write+0xe4/0x110 fs/read_write.c:487
 vfs_write+0x20c/0x580 fs/read_write.c:549
 ksys_write+0x14f/0x2d0 fs/read_write.c:599
 __do_sys_write fs/read_write.c:611 [inline]
 __se_sys_write fs/read_write.c:608 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:608
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458c29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29
RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4
R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff

The buggy address belongs to the page:
page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x1fffc0000000000()
raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2
 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00
                         ^
 ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00
 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fixes: ed0de45a ("ipv4: recompile ip options in ipv4_link_failure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a limit on the number of skbs that fuzzers can queue
into loopback_queue. 1000 packets for rose loopback seems more than enough.

Then, since we now have multiple cpus in most linux hosts,
we also need to limit the number of skbs rose_loopback_timer()
can dequeue at each round.

rose_loopback_queue() can be drop-monitor friendly, calling
consume_skb() or kfree_skb() appropriately.

Finally, use mod_timer() instead of del_timer() + add_timer()

syzbot report was :

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu:    0-...!: (10499 ticks this GP) idle=536/1/0x4000000000000002 softirq=103291/103291 fqs=34
rcu:     (t=10500 jiffies g=140321 q=323)
rcu: rcu_preempt kthread starved for 10426 jiffies! g140321 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=1
rcu: RCU grace-period kthread stack dump:
rcu_preempt     I29168    10      2 0x80000000
Call Trace:
 context_switch kernel/sched/core.c:2877 [inline]
 __schedule+0x813/0x1cc0 kernel/sched/core.c:3518
 schedule+0x92/0x180 kernel/sched/core.c:3562
 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803
 rcu_gp_fqs_loop kernel/rcu/tree.c:1971 [inline]
 rcu_gp_kthread+0x962/0x17b0 kernel/rcu/tree.c:2128
 kthread+0x357/0x430 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
NMI backtrace for cpu 0
CPU: 0 PID: 7632 Comm: kworker/0:4 Not tainted 5.1.0-rc5+ #172
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events iterate_cleanup_work
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101
 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62
 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
 rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1223
 print_cpu_stall kernel/rcu/tree.c:1360 [inline]
 check_cpu_stall kernel/rcu/tree.c:1434 [inline]
 rcu_pending kernel/rcu/tree.c:3103 [inline]
 rcu_sched_clock_irq.cold+0x500/0xa4a kernel/rcu/tree.c:2544
 update_process_times+0x32/0x80 kernel/time/timer.c:1635
 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161
 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271
 __run_hrtimer kernel/time/hrtimer.c:1389 [inline]
 __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451
 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509
 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline]
 smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x50 kernel/kcov.c:95
Code: 89 25 b4 6e ec 08 41 bc f4 ff ff ff e8 cd 5d ea ff 48 c7 05 9e 6e ec 08 00 00 00 00 e9 a4 e9 ff ff 90 90 90 90 90 90 90 90 90 <55> 48 89 e5 48 8b 75 08 65 48 8b 04 25 00 ee 01 00 65 8b 15 c8 60
RSP: 0018:ffff8880ae807ce0 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13
RAX: ffff88806fd40640 RBX: dffffc0000000000 RCX: ffffffff863fbc56
RDX: 0000000000000100 RSI: ffffffff863fbc1d RDI: ffff88808cf94228
RBP: ffff8880ae807d10 R08: ffff88806fd40640 R09: ffffed1015d00f8b
R10: ffffed1015d00f8a R11: 0000000000000003 R12: ffff88808cf941c0
R13: 00000000fffff034 R14: ffff8882166cd840 R15: 0000000000000000
 rose_loopback_timer+0x30d/0x3f0 net/rose/rose_loopback.c:91
 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers kernel/time/timer.c:1681 [inline]
 __run_timers kernel/time/timer.c:1649 [inline]
 run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
 __do_softirq+0x266/0x95a kernel/softirq.c:293
 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 5271953c ("rxrpc: Use the UDP encap_rcv hook"),
rxrpc_input_packet() is directly called from lockless UDP receive
path, under rcu_read_lock() protection.

It must therefore use RCU rules :

- udp_sk->sk_user_data can be cleared at any point in this function.
  rcu_dereference_sk_user_data() is what we need here.

- Also, since sk_user_data might have been set in rxrpc_open_socket()
  we must observe a proper RCU grace period before kfree(local) in
  rxrpc_lookup_local()

v4: @local can be NULL in xrpc_lookup_local() as reported by kbuild test robot <lkp@intel.com>
        and Julia Lawall <julia.lawall@lip6.fr>, thanks !

v3,v2 : addressed David Howells feedback, thanks !

syzbot reported :

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 19236 Comm: syz-executor703 Not tainted 5.1.0-rc6 #79
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__lock_acquire+0xbef/0x3fb0 kernel/locking/lockdep.c:3573
Code: 00 0f 85 a5 1f 00 00 48 81 c4 10 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 21 00 00 49 81 7d 00 20 54 9c 89 0f 84 cf f4
RSP: 0018:ffff88809d7aef58 EFLAGS: 00010002
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000026 RSI: 0000000000000000 RDI: 0000000000000001
RBP: ffff88809d7af090 R08: 0000000000000001 R09: 0000000000000001
R10: ffffed1015d05bc7 R11: ffff888089428600 R12: 0000000000000000
R13: 0000000000000130 R14: 0000000000000001 R15: 0000000000000001
FS:  00007f059044d700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b6040 CR3: 00000000955ca000 CR4: 00000000001406f0
Call Trace:
 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4211
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152
 skb_queue_tail+0x26/0x150 net/core/skbuff.c:2972
 rxrpc_reject_packet net/rxrpc/input.c:1126 [inline]
 rxrpc_input_packet+0x4a0/0x5536 net/rxrpc/input.c:1414
 udp_queue_rcv_one_skb+0xaf2/0x1780 net/ipv4/udp.c:2011
 udp_queue_rcv_skb+0x128/0x730 net/ipv4/udp.c:2085
 udp_unicast_rcv_skb.isra.0+0xb9/0x360 net/ipv4/udp.c:2245
 __udp4_lib_rcv+0x701/0x2ca0 net/ipv4/udp.c:2301
 udp_rcv+0x22/0x30 net/ipv4/udp.c:2482
 ip_protocol_deliver_rcu+0x60/0x8f0 net/ipv4/ip_input.c:208
 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234
 NF_HOOK include/linux/netfilter.h:289 [inline]
 NF_HOOK include/linux/netfilter.h:283 [inline]
 ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:255
 dst_input include/net/dst.h:450 [inline]
 ip_rcv_finish+0x1e1/0x300 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:289 [inline]
 NF_HOOK include/linux/netfilter.h:283 [inline]
 ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0x115/0x1a0 net/core/dev.c:4987
 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5099
 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5202
 napi_frags_finish net/core/dev.c:5769 [inline]
 napi_gro_frags+0xade/0xd10 net/core/dev.c:5843
 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981
 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027
 call_write_iter include/linux/fs.h:1866 [inline]
 do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681
 do_iter_write fs/read_write.c:957 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:938
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002
 do_writev+0x15e/0x370 fs/read_write.c:1037
 __do_sys_writev fs/read_write.c:1110 [inline]
 __se_sys_writev fs/read_write.c:1107 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 5271953c ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a designated reviewer for the LED subsystem as there
are already two maintainers assigned.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

Before the commit 490ea596 ("RDS: IB: move FMR code to its own file"),
when the dirty_count is greater than 9/10 of max_items of 8K pool,
1M pool is used, Vice versa. After the commit 490ea596 ("RDS: IB: move
FMR code to its own file"), the above is removed. When we make the
following tests.

Server:
  rds-stress -r 1.1.1.16 -D 1M

Client:
  rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M

The following will appear.
"
connecting to 1.1.1.16:4000
negotiated options, tasks will start in 2 seconds
Starting up..header from 1.1.1.166:4001 to id 4001 bogus
..
tsks  tx/s  rx/s tx+rx K/s  mbi K/s  mbo K/s tx us/c  rtt us
cpu %
   1    0    0     0.00     0.00     0.00    0.00 0.00 -1.00
   1    0    0     0.00     0.00     0.00    0.00 0.00 -1.00
   1    0    0     0.00     0.00     0.00    0.00 0.00 -1.00
   1    0    0     0.00     0.00     0.00    0.00 0.00 -1.00
   1    0    0     0.00     0.00     0.00    0.00 0.00 -1.00
...
"
So this exchange between 8K and 1M pool is added back.

Fixes: commit 490ea596 ("RDS: IB: move FMR code to its own file")
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vrf device is not able to change mac address now because lack of
ndo_set_mac_address. Complete this in case some apps need to do
this.
Reported-by: Hui Wang <wanghui104@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CIFS can leak pages reference gotten through GUP (get_user_pages*()
through iov_iter_get_pages()). This happen if cifs_send_async_read()
or cifs_write_from_iter() calls fail from within __cifs_readv() and
__cifs_writev() respectively. This patch move page unreference to
cifs_aio_ctx_release() which will happens on all code paths this is
all simpler to follow for correctness.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

A path-based rename returning EBUSY will incorrectly try opening
the file with a cifs (NT Create AndX) operation on an smb2+ mount,
which causes the server to force a session close.

If the mount is smb2+, skip the fallback.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

Commit 088aaf17 introduced a leak where
if SMB2_read() returned an error we would return without freeing the
request buffer.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

A pointer to crtc was missing, resulting in the following build error:
drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: sparse: incorrect type in argument 1 (different base types)
drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse:    expected struct drm_crtc *crtc
drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse:    got struct drm_crtc_state *state
drivers/gpu/drm/vc4/vc4_crtc.c:1045:39: sparse: sparse: not enough arguments for function vc4_crtc_destroy_state
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/2b6ed5e6-81b0-4276-8860-870b54ca3262@linux.intel.com
Fixes: d0810679 ("drm/vc4: Fix memory leak during gpu reset.")
Cc: <stable@vger.kernel.org> # v4.6+
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Our components may still be using the DRM device driver (if only to
access our driver's private data), so make sure to unbind them before
the final drm_dev_put.

Also release our reserved memory after component unbind instead of
before to match reverse creation order.

Fixes: f5a9ed86 ("drm/sun4i: Fix component unbinding and component master deletion")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424090413.6918-1-paul.kocialkowski@bootlin.com

__drm_atomic_helper_crtc_destroy_state does not free memory, it only
cleans it up. Fix this by calling the functions own destroy function.

Fixes: 6d6e5003 ("drm/vc4: Allocate the right amount of space for boot-time CRTC state.")
Cc: Eric Anholt <eric@anholt.net>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-2-maarten.lankhorst@linux.intel.com

Previously BMC's MAC address is calculated by simply adding 1 to the
last byte of network controller's MAC address, and it produces incorrect
result when network controller's MAC address ends with 0xFF.

The problem can be fixed by calling eth_addr_inc() function to increment
MAC address; besides, the MAC address is also validated before assigning
to BMC.

Fixes: cb10c7c0 ("net/ncsi: Add NCSI Broadcom OEM command")
Signed-off-by: Tao Ren <taoren@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm regression fixes from Dave Airlie:
 "We interrupt your regularly scheduled drm fixes for a regression
  special.

  The first is for a fix in i915 that had unexpected side effects
  fallout in the userspace X.org modesetting driver where X would no
  longer start. I got tired of the nitpicking and issued a large hammer
  on it. The X.org driver is buggy, but blackscreen regressions are
  worse.

  The second was an oversight that myself and Gerd should have noticed
  better, Gerd is trying to fix this properly, but the regression is too
  large to leave, even if the original behaviour is bad in some cases,
  it's clearly bad to break a bunch of working use cases.

  I'll likely have a regular fixes pull later, but I really wanted to
  highlight these"

* tag 'drm-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/virtio: drop prime import/export callbacks"
  Revert "drm/i915/fbdev: Actually configure untiled displays"

The netdev variant is usable on any context since it disables interrupts.
The napi variant of the call should only be used within softirq context.
Replace napi_alloc_frag on driver init with the correct netdev_alloc_frag
call

Changes since v1:
- Adjusted commit message
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Fixes: 4acb20b4 ("net: socionext: different approach on DMA")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are spelling mistakes in structure elements, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch does more harm than good, as it breaks both Xwayland and
gnome-shell with X11.

Xwayland requires DRI3 & DRI3 requires PRIME.

X11 crash for obscure double-free reason which are hard to debug
(starting X11 by hand doesn't trigger the crash).

I don't see an apparent problem implementing those stub prime
functions, they may return an error at run-time, and it seems to be
handled fine by GNOME at least.

This reverts commit b318e3ff.
[airlied:
This broke userspace for virtio-gpus, and regressed things from DRI3 to DRI2.

This brings back the original problem, but it's better than regressions.]

Fixes: b318e3ff ("drm/virtio: drop prime import/export callbacks")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This reverts commit d179b88d.

This commit is documented to break userspace X.org modesetting driver in certain configurations.

The X.org modesetting userspace driver is broken. No fixes are available yet. In order for this patch to be applied it either needs a config option or a workaround developed.

This has been reported a few times, saying it's a userspace problem is clearly against the regression rules.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109806Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: <stable@vger.kernel.org> # v3.19+

Pull nfsd bugfixes from Bruce Fields:
 "Fix miscellaneous nfsd bugs, in NFSv4.1 callbacks, NFSv4.1
  lock-notification callbacks, NFSv3 readdir encoding, and the
  cache/upcall code"

* tag 'nfsd-5.1-1' of git://linux-nfs.org/~bfields/linux:
  nfsd: wake blocked file lock waiters before sending callback
  nfsd: wake waiters blocked on file_lock before deleting it
  nfsd: Don't release the callback slot unless it was actually held
  nfsd/nfsd3_proc_readdir: fix buffer count and page pointers
  sunrpc: don't mark uninitialised items as VALID.