In the fast commit, it adds REQ_FUA and REQ_PREFLUSH on each fast
commit block when barrier is enabled.  However, in recovery phase,
ext4 compares CRC value in the tail.  So it is sufficient to add
REQ_FUA and REQ_PREFLUSH on the block that has tail.
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210106013242epcms2p5b6b4ed8ca86f29456fdf56aa580e74b4@epcms2p5Signed-off-by: Theodore Ts'o <tytso@mit.edu>

We got a "deleted inode referenced" warning cross our fsstress test. The
bug can be reproduced easily with following steps:

  cd /dev/shm
  mkdir test/
  fallocate -l 128M img
  mkfs.ext4 -b 1024 img
  mount img test/
  dd if=/dev/zero of=test/foo bs=1M count=128
  mkdir test/dir/ && cd test/dir/
  for ((i=0;i<1000;i++)); do touch file$i; done # consume all block
  cd ~ && renameat2(AT_FDCWD, /dev/shm/test/dir/file1, AT_FDCWD,
    /dev/shm/test/dir/dst_file, RENAME_WHITEOUT) # ext4_add_entry in
    ext4_rename will return ENOSPC!!
  cd /dev/shm/ && umount test/ && mount img test/ && ls -li test/dir/file1
  We will get the output:
  "ls: cannot access 'test/dir/file1': Structure needs cleaning"
  and the dmesg show:
  "EXT4-fs error (device loop0): ext4_lookup:1626: inode #2049: comm ls:
  deleted inode referenced: 139"

ext4_rename will create a special inode for whiteout and use this 'ino'
to replace the source file's dir entry 'ino'. Once error happens
latter(the error above was the ENOSPC return from ext4_add_entry in
ext4_rename since all space has been consumed), the cleanup do drop the
nlink for whiteout, but forget to restore 'ino' with source file. This
will trigger the bug describle as above.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Fixes: cd808dec ("ext4: support RENAME_WHITEOUT")
Link: https://lore.kernel.org/r/20210105062857.3566-1-yangerkun@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

After full/fast commit, entries in staging queue are promoted to main
queue. In ext4_fs_cleanup function, it splice to staging queue to
staging queue.

Fixes: aa75f4d3 ("ext4: main fast-commit commit path")
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201230094851epcms2p6eeead8cc984379b37b2efd21af90fd1a@epcms2p6Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

1: ext4_iget/ext4_find_extent never returns NULL, use IS_ERR
instead of IS_ERR_OR_NULL to fix this.

2: ext4_fc_replay_inode should set the inode to NULL when IS_ERR.
and go to call iput properly.

Fixes: 8016e29f ("ext4: fast commit recovery path")
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201230033827.3996064-1-yili@winhong.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

When the first file is opened, ext4 samples the mountpoint of the
filesystem in 64 bytes of the super block.  It does so using
strlcpy(), this means that the remaining bytes in the super block
string buffer are untouched.  If the mount point before had a longer
path than the current one, it can be reconstructed.

Consider the case where the fs was mounted to "/media/johnjdeveloper"
and later to "/".  The super block buffer then contains
"/\x00edia/johnjdeveloper".

This case was seen in the wild and caused confusion how the name
of a developer ands up on the super block of a filesystem used
in production...

Fix this by using strncpy() instead of strlcpy().  The superblock
field is defined to be a fixed-size char array, and it is already
marked using __nonstring in fs/ext4/ext4.h.  The consumer of the field
in e2fsprogs already assumes that in the case of a 64+ byte mount
path, that s_last_mounted will not be NUL terminated.

Link: https://lore.kernel.org/r/X9ujIOJG/HqMr88R@mit.eduReported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

The wrapper is now useless since it does what
ext4_handle_dirty_metadata() does. Just remove it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-9-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

When setting password salt in the superblock, we forget to recompute the
superblock checksum so it will not match until the next superblock
modification which recomputes the checksum. Fix it.

CC: Michael Halcrow <mhalcrow@google.com>
Reported-by: Andreas Dilger <adilger@dilger.ca>
Fixes: 9bd8212f ("ext4 crypto: add encryption policy and password salt support")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-8-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

No behavioral change.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-6-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

If journalling is still working at the moment we get to writing error
information to the superblock we cannot write directly to the superblock
as such write could race with journalled update of the superblock and
cause journal checksum failures, writing inconsistent information to the
journal or other problems. We cannot journal the superblock directly
from the error handling functions as we are running in uncertain context
and could deadlock so just punt journalled superblock update to a
workqueue.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-5-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Protect all superblock modifications (including checksum computation)
with a superblock buffer lock. That way we are sure computed checksum
matches current superblock contents (a mismatch could cause checksum
failures in nojournal mode or if an unjournalled superblock update races
with a journalled one). Also we avoid modifying superblock contents
while it is being written out (which can cause DIF/DIX failures if we
are running in nojournal mode).
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-4-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Everybody passes 1 as sync argument of ext4_commit_super(). Just drop
it.
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-3-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

save_error_info() is always called together with ext4_handle_error().
Combine them into a single call and move unconditional bits out of
save_error_info() into ext4_handle_error().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-2-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

ext4_bio_write_page does not need wbc parameter, since its parameter
io contains the io_wbc field. The io::io_wbc is initialized by
ext4_io_submit_init which is called in ext4_writepages and
ext4_writepage functions prior to ext4_bio_write_page.
Therefor, when ext4_bio_write_page is called, wbc info
has already been included in io parameter.
Signed-off-by: Lei Chen <lennychen@tencent.com>
Link: https://lore.kernel.org/r/1607669664-25656-1-git-send-email-lennychen@tencent.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Commit cfd73237 ("ext4: add prefetching for block allocation
bitmaps") introduced block bitmap prefetch, and expects to read block
bitmaps of flex_bg through an IO.  However, it seems to ignore the
value range of s_log_groups_per_flex.  In the scenario where the value
of s_log_groups_per_flex is greater than 27, s_mb_prefetch or
s_mb_prefetch_limit will overflow, cause a divide zero exception.

In addition, the logic of calculating nr is also flawed, because the
size of flexbg is fixed during a single mount, but s_mb_prefetch can
be modified, which causes nr to fail to meet the value condition of
[1, flexbg_size].

To solve this problem, we need to set the upper limit of
s_mb_prefetch.  Since we expect to load block bitmaps of a flex_bg
through an IO, we can consider determining a reasonable upper limit
among the IO limit parameters.  After consideration, we chose
BLK_MAX_SEGMENT_SIZE.  This is a good choice to solve divide zero
problem and avoiding performance degradation.

[ Some minor code simplifications to make the changes easy to follow -- TYT ]
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Samuel Liao <samuelliao@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1607051143-24508-1-git-send-email-brookxu@tencent.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

When filesystem inconsistency is detected with group locked, we
currently try to modify superblock to store error there without
blocking. However this can cause superblock checksum failures (or
DIF/DIX failure) when the superblock is just being written out.

Make error handling code just store error information in ext4_sb_info
structure and copy it to on-disk superblock only in ext4_commit_super().
In case of error happening with group locked, we just postpone the
superblock flushing to a workqueue.

[ Added fixup so that s_first_error_* does not get updated after
  the file system is remounted.
  Also added fix for syzbot failure.  - Ted ]
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201127113405.26867-8-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Hillf Danton <hdanton@sina.com>
Reported-by: syzbot+9043030c040ce1849a60@syzkaller.appspotmail.com

We convert errno's to ext4 on-disk format error codes in
save_error_info(). Add a function and a bit of macro magic to make this
simpler.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127113405.26867-7-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Just move error info related functions in super.c close to
ext4_handle_error(). We'll want to combine save_error_info() with
ext4_handle_error() and this makes change more obvious and saves a
forward declaration as well. No functional change.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127113405.26867-6-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

The only difference between __ext4_abort() and __ext4_error() is that
the former one ignores errors=continue mount option. Unify the code to
reduce duplication.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127113405.26867-5-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

We use __ext4_error() when ext4_protect_reserved_inode() finds
filesystem corruption. However EXT4_ERROR_INODE_ERR() is perfectly
capable of reporting all the needed information. So just use that.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127113405.26867-4-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Superblock is written out either through ext4_commit_super() or through
ext4_handle_dirty_super(). In both cases we recompute the checksum so it
is not necessary to recompute it after updating superblock free inodes &
blocks counters.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127113405.26867-3-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

ext4_handle_error() with errors=continue mount option can accidentally
remount the filesystem read-only when the system is rebooting. Fix that.

Fixes: 1dc1097f ("ext4: avoid panic during forced reboot")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20201127113405.26867-2-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Xattr code using inodes with large xattr data can end up dropping last
inode reference (and thus deleting the inode) from places like
ext4_xattr_set_entry(). That function is called with transaction started
and so ext4_evict_inode() can deadlock against fs freezing like:

CPU1					CPU2

removexattr()				freeze_super()
  vfs_removexattr()
    ext4_xattr_set()
      handle = ext4_journal_start()
      ...
      ext4_xattr_set_entry()
        iput(old_ea_inode)
          ext4_evict_inode(old_ea_inode)
					  sb->s_writers.frozen = SB_FREEZE_FS;
					  sb_wait_write(sb, SB_FREEZE_FS);
					  ext4_freeze()
					    jbd2_journal_lock_updates()
					      -> blocks waiting for all
					         handles to stop
            sb_start_intwrite()
	      -> blocks as sb is already in SB_FREEZE_FS state

Generally it is advisable to delete inodes from a separate transaction
as it can consume quite some credits however in this case it would be
quite clumsy and furthermore the credits for inode deletion are quite
limited and already accounted for. So just tweak ext4_evict_inode() to
avoid freeze protection if we have transaction already started and thus
it is not really needed anyway.

Cc: stable@vger.kernel.org
Fixes: dec214d0 ("ext4: xattr inode deduplication")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127110649.24730-1-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Add a helper to read number of fast commit blocks from jbd2 superblock
and also rename the JBD2_MIN_FC_BLKS to
JBD2_DEFAULT_FAST_COMMIT_BLOCKS since this constant is just the
default number of fast commit blocks to use in case number of fast
commit blocks isn't set in jbd2 superblock.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201120202232.2240293-2-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

This patch makes fast_commit.h byte by byte identical with
e2fsprogs/fast_commit.h. This will help us ensure that there are no
on-disk format inconsistencies between e2fsck and kernel ext4.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201120202232.2240293-1-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/03497331f088a938d7a728e7a689bd7953139429.1605896059.git.gustavoars@kernel.orgSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Fast commit on-disk format is designed such that the replay of these
tags can be idempotent. This patch adds documentation in the code in
form of comments and in form kernel docs that describes these
characteristics. This patch also adds a TODO item needed to ensure
kernel fast commit replay idempotence.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201119232822.1860882-1-harshadshirwadkar@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

There are no callers of the EXT4_CURRENT_REV macro, so remove it.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1605164202-31120-1-git-send-email-kaixuxia@tencent.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

The ext4_find_extent() function never returns NULL, it returns error
pointers.

Fixes: 44059e503b03 ("ext4: fast commit recovery path")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201023112232.GB282278@mwandaSigned-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

Check for valid block size directly by validating s_log_block_size; we
were doing this in two places.  First, by calculating blocksize via
BLOCK_SIZE << s_log_block_size, and then checking that the blocksize
was valid.  And then secondly, by checking s_log_block_size directly.

The first check is not reliable, and can trigger an UBSAN warning if
s_log_block_size on a maliciously corrupted superblock is greater than
22.  This is harmless, since the second test will correctly reject the
maliciously fuzzed file system, but to make syzbot shut up, and
because the two checks are duplicative in any case, delete the
blocksize check, and move the s_log_block_size earlier in
ext4_fill_super().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: syzbot+345b75652b1d24227443@syzkaller.appspotmail.com

When freeing metadata, we will create an ext4_free_data and
insert it into the pending free list.  After the current
transaction is committed, the object will be freed.

ext4_mb_free_metadata() will check whether the area to be freed
overlaps with the pending free list. If true, return directly. At this
time, ext4_free_data is leaked.  Fortunately, the probability of this
problem is small, since it only occurs if the file system is corrupted
such that a block is claimed by more one inode and those inodes are
deleted within a single jbd2 transaction.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/1604764698-4269-8-git-send-email-brookxu@tencent.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-7-git-send-email-brookxu@tencent.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Since ext4_data_block_valid() has been renamed to ext4_inode_block_valid(),
the related comments need to be updated.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-5-git-send-email-brookxu@tencent.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

The code of mb_find_order_for_block is a bit obscure, but we can
simplify it with mb_find_buddy(), make the code more concise.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-3-git-send-email-brookxu@tencent.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

After this patch (163a203d), if an abnormal bitmap is detected, we
will mark the group as corrupt, and we will not use this group in
the future. Therefore, it should be meaningless to regenerate the
buddy bitmap of this group, It might be better to delete it.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-2-git-send-email-brookxu@tencent.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

There are currently multiple forms of assertion, such as J_ASSERT().
J_ASEERT() is provided for the jbd module, which is a public module.
Maybe we should use custom ASSERT() like other file systems, such as
xfs, which would be better.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-1-git-send-email-brookxu@tencent.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Right now, it is hard to understand which quota journalling type is enabled:
you need to be quite familiar with kernel code and trace it or really
understand what different combinations of fs flags/mount options lead to.

This patch adds printing of current quota jounalling mode on each
mount/remount, thus making it easier to check it at a glance/in autotests.
The semantics is similar to ext4 data journalling modes:

* journalled - quota configured, journalling will be enabled
* writeback  - quota configured, journalling won't be enabled
* none       - quota isn't configured
* disabled   - kernel compiled without CONFIG_QUOTA feature
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1603336860-16153-2-git-send-email-dotdot@yandex-team.ruSigned-off-by: Roman Anufriev <dotdot@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Right now, there are several places, where we check whether fs is
capable of enabling quota or if quota is journalled with quite long
and non-self-descriptive condition statements.

This patch wraps these statements into helpers for better readability
and easier usage.

Link: https://lore.kernel.org/r/1603336860-16153-1-git-send-email-dotdot@yandex-team.ruReviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Roman Anufriev <dotdot@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Variable ex is assigned a variable that is not being read, the assignment
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201021132326.148052-1-colin.king@canonical.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

bv_page can't be NULL in a valid bio_vec, so we can remove the NULL check,
as we did in other places when calling bio_for_each_segment_all() to go
through all bio_vec of a bio.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Link: https://lore.kernel.org/r/20201020082201.34257-1-tian.xianting@h3c.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

The out_fail branch path don't release the bh and the second bh is
valid only in the for statement, so we don't need to set them to NULL.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/1603194069-17557-1-git-send-email-kaixuxia@tencent.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>