- 18 Jun, 2019 40 commits
-
-
Tomas Henzl authored
Checkpatch emits a warning when using symbolic permissions. Use octal permissions instead. No functional change. Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Tomas Henzl authored
Support is easier with all driver parameters visible in sysfs. Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warnings: drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_fw_crash_buffer_show: drivers/scsi/megaraid/megaraid_sas_base.c:3138:16: warning: variable buff_addr set but not used [-Wunused-but-set-variable] drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_get_pd_list: drivers/scsi/megaraid/megaraid_sas_base.c:4426:13: warning: variable ci_h set but not used [-Wunused-but-set-variable] 'buff_addr' is never used since inroduction in commit fc62b3fc ("megaraid_sas : Firmware crash dump feature support") 'ci_h' is not used since commit 9b3d028f ("scsi: megaraid_sas: Pre-allocate frequently used DMA buffers") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_create_frame_pool: drivers/scsi/megaraid/megaraid_sas_base.c:4124:6: warning: variable sge_sz set but not used [-Wunused-but-set-variable] It's not used any more since commit 200aed58 ("megaraid_sas: endianness related bug fixes and code optimization") Signed-off-by:
-
Nathan Chancellor authored
When building powerpc pseries_defconfig or powernv_defconfig: drivers/scsi/lpfc/lpfc_nvmet.c:224:1: error: unused function 'lpfc_nvmet_get_ctx_for_xri' [-Werror,-Wunused-function] drivers/scsi/lpfc/lpfc_nvmet.c:246:1: error: unused function 'lpfc_nvmet_get_ctx_for_oxid' [-Werror,-Wunused-function] These functions are only compiled when CONFIG_NVME_TARGET_FC is enabled. Use that same condition so there is no more warning. While the fixes commit did not introduce these functions, it caused these warnings. Fixes: 4064b27417a7 ("scsi: lpfc: Make some symbols static") Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Acked-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Jack Wang authored
Lindar's email addess is bouncing for some time, just remove it. ProfitBricks was rebranded to 1 & 1 Cloud IONOS, so update my email address too. Signed-off-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Nathan Chancellor authored
clang warns: drivers/scsi/ibmvscsi/ibmvscsi.c:2126:7: warning: variable 'rc' is used uninitialized whenever switch case is taken [-Wsometimes-uninitialized] case IBMVSCSI_HOST_ACTION_NONE: ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/ibmvscsi/ibmvscsi.c:2151:6: note: uninitialized use occurs here if (rc) { ^~ Initialize rc in the IBMVSCSI_HOST_ACTION_UNBLOCK case statement then shuffle IBMVSCSI_HOST_ACTION_NONE down to the default case statement and make it return early so that rc is never used uninitialized in this function. Fixes: 035a3c4046b5 ("scsi: ibmvscsi: redo driver work thread to use enum action states") Link: https://github.com/ClangBuiltLinux/linux/issues/502Suggested-by:Michael Ellerman <mpe@ellerman.id.au> Suggested-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
YueHaibing authored
Fix sparse warnings: drivers/scsi/lpfc/lpfc_sli.c:115:1: warning: symbol 'lpfc_sli4_pcimem_bcopy' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_sli.c:7854:1: warning: symbol 'lpfc_sli4_process_missed_mbox_completions' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:223:27: warning: symbol 'lpfc_nvmet_get_ctx_for_xri' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:245:27: warning: symbol 'lpfc_nvmet_get_ctx_for_oxid' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_init.c:75:10: warning: symbol 'lpfc_present_cpu' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warnings: drivers/scsi/lpfc/lpfc_init.c: In function lpfc_setup_cq_lookup: drivers/scsi/lpfc/lpfc_init.c:9359:30: warning: variable qp set but not used [-Wunused-but-set-variable] It's not used since commit e70596a60f88 ("scsi: lpfc: Fix poor use of hardware queues if fewer irq vectors") Signed-off-by: -
Enzo Matsumiya authored
Remove double assignment in qla2x00_update_fcport(). Signed-off-by:
Enzo Matsumiya <ematsumiya@suse.de> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Xiang Chen authored
For v3 hw, stash is enabled to promote performance, but it does little to improve performance according to current tests. What's more, it causes exceptions for some situations, so disable it. Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Luo Jiaxing authored
Several error codes will be generated between PHY down to up. This issue was introduced by HW design. The designers came to the conclusion that we should ignore these errors. Signed-off-by:
Jiaxing Luo <luojiaxing@huawei.com> Signed-off-by:
-
Xiang Chen authored
It reports a error as follows from some tools at two places in our code: runtime error: left shift of 4 by 29 places cannot be represented in type 'int' So change the type of the two numbers to unsigned to avoid the error. Signed-off-by:
-
John Garry authored
Macro HISI_SAS_SGE_PAGE_CNT is defined to SG_CHUNK_SIZE, which is 128. This means that sizeof(struct hisi_sas_slot_buf_table) is 4192. This is just over a 4K, which can mean inefficient DMA memory usage (for no PI). Reduce the size of HISI_SAS_SGE_PAGE_CNT to 124 to fit in a 4K page. With this change, we experience no performance hit. Cc: dann frazier <dann.frazier@canonical.com> Signed-off-by:
-
Xiaofei Tan authored
The argument of dev_err() called by multi_bit_ecc_error_process_v3_hw() is not right. We pass two arguments, but there is only one printk format specifier in the string. Also move the print format string to dev_err(). Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
-
Xiang Chen authored
When removing the driver or when probe fails, we need to delete the PHY timers. Signed-off-by:
-
Bharath Vedartham authored
Replace kmalloc + memcpy with kmemdup. This was reported by coccinelle. Signed-off-by:
Bharath Vedartham <linux.bhar@gmail.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warnings: drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_suspend: drivers/scsi/megaraid/megaraid_sas_base.c:7269:20: warning: variable host set but not used [-Wunused-but-set-variable] drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_aen_polling: drivers/scsi/megaraid/megaraid_sas_base.c:8397:15: warning: variable wait_time set but not used [-Wunused-but-set-variable] 'host' never used since introduction in commit 31ea7088 ("[SCSI] megaraid_sas: add hibernation support") 'wait_time' never used since commit 11c71cb4 ("megaraid_sas: Do not allow PCI access during OCR") Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_transition_to_ready: drivers/scsi/megaraid/megaraid_sas_base.c:3900:6: warning: variable cur_state set but not used [-Wunused-but-set-variable] Never used since commit 7218df69 ("[SCSI] megaraid_sas: use the firmware boot timeout when waiting for commands") Signed-off-by:
-
Gen Zhang authored
In _ctl_ioctl_main(), 'ioctl_header' is fetched the first time from userspace. 'ioctl_header.ioc_number' is then checked. The legal result is saved to 'ioc'. Then, in condition MPT3COMMAND, the whole struct is fetched again from the userspace. Then _ctl_do_mpt_command() is called, 'ioc' and 'karg' as inputs. However, a malicious user can change the 'ioc_number' between the two fetches, which will cause a potential security issues. Moreover, a malicious user can provide a valid 'ioc_number' to pass the check in first fetch, and then modify it in the second fetch. To fix this, we need to recheck the 'ioc_number' in the second fetch. Signed-off-by:
Gen Zhang <blackgod016574@gmail.com> Acked-by:
Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
Stanley Chu authored
Currently auto-hibernate is activated if host supports auto-hibern8 capability. However error-handling is not implemented, which makes the feature somewhat risky. If either "Hibernate Enter" or "Hibernate Exit" fail during auto-hibernate flow, the corresponding interrupt "UIC_HIBERNATE_ENTER" or "UIC_HIBERNATE_EXIT" shall be raised according to UFS specification. This patch adds auto-hibernate error-handling: - Monitor "Hibernate Enter" and "Hibernate Exit" interrupts after auto-hibernate feature is activated. - If a failure happens, trigger error-handling just like "manual-hibernate" failure and apply the same recovery flow: schedule UFS error handler in ufshcd_check_errors(), and then do host reset and restore in UFS error handler. Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Avri Altman <Avri.Altman@wdc.com> Signed-off-by:
-
Stanley Chu authored
Some vendor-specific initialization flow may set its own auto-hibernate timer. In this case, do not overwrite timer value as "default value" in ufshcd_init(). Signed-off-by:
-
Stanley Chu authored
The checking of Auto-Hibernation support is used in many places in the driver, thus re-factor it as ufshcd_is_auto_hibern8_supported() to make code more clean. Signed-off-by:
-
Jason Yan authored
Since we are processing events synchronously now, the second call of sas_ex_join_wide_port() in sas_ex_discover_dev() is not needed. There will be no races with other works in disco workqueue. So remove the second sas_ex_join_wide_port(). I did not change the return value of 'res' to error when discover failed because we need to continue to discover other phys if one phy discover failed. So let's keep that logic as before and just add a debug log to detect the failure. And directly return if second fanout expander attatched to the parent expander because it has nothing to do after the phy is disabled. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
-
Thomas Meyer authored
Use *_pool_zalloc rather than *_pool_alloc followed by memset with 0. Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Acked-by:
-
Colin Ian King authored
Currently the check for a lockup_detected failure exits via the label return_reset_status that reads and dereferences an uninitialized pointer dev. Fix this by ensuring dev is inintialized to null. Addresses-Coverity: ("Uninitialized pointer read") Fixes: 14991a5bade5 ("scsi: hpsa: correct device resets") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Don Brace <don.brace@microsemi.com> Reviewed-by:
-
Hariprasad Kelam authored
Fix the following warning reported by coccicheck: drivers/target/iscsi/iscsi_target_nego.c:175:6-8: WARNING: possible condition with no effect (if == else) Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Reviewed-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
-
Weitao Hou authored
Fix abord to abort. Signed-off-by:
Weitao Hou <houweitaoo@gmail.com> Acked-by:
-
Ondrej Zary authored
Add PCMCIA card support to Future Domain SCSI driver. Tested with IBM SCSI PCMCIA Adapter 40G1890. Signed-off-by:
Ondrej Zary <linux@zary.sk> Signed-off-by:
-
Ondrej Zary authored
Add register bit definitions from documentation to header file and use them instead of magic constants. No changes to generated binary. Signed-off-by:
-
Tyrel Datwyler authored
After a successful SRP login response we call scsi_unblock_requests() to kick any pending IOs. The callback to process this SRP response happens in a tasklet and therefore is in softirq context. The result of such is that when blk-mq is enabled, it is no longer safe to call scsi_unblock_requests() from this context. The result of duing so triggers the following WARN_ON splat in dmesg after a host reset or CRQ reenablement. WARNING: CPU: 0 PID: 0 at block/blk-mq.c:1375 __blk_mq_run_hw_queue+0x120/0x180 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.0.0-rc8 #4 NIP [c0000000009771e0] __blk_mq_run_hw_queue+0x120/0x180 LR [c000000000977484] __blk_mq_delay_run_hw_queue+0x244/0x250 Call Trace: __blk_mq_delay_run_hw_queue+0x244/0x250 blk_mq_run_hw_queue+0x8c/0x1c0 blk_mq_run_hw_queues+0x60/0x90 scsi_run_queue+0x1e4/0x3b0 scsi_run_host_queues+0x48/0x80 login_rsp+0xb0/0x100 ibmvscsi_handle_crq+0x30c/0x3e0 ibmvscsi_task+0x54/0xe0 tasklet_action_common.isra.3+0xc4/0x1a0 __do_softirq+0x174/0x3f4 irq_exit+0xf0/0x120 __do_irq+0xb0/0x210 call_do_irq+0x14/0x24 do_IRQ+0x9c/0x130 hardware_interrupt_common+0x14c/0x150 This patch fixes the issue by introducing a new host action for unblocking the scsi requests in our seperate work thread. Signed-off-by:
-
Tyrel Datwyler authored
The current implemenation relies on two flags in the driver's private host structure to signal the need for a host reset or to reenable the CRQ after a LPAR migration. This patch does away with those flags and introduces a single action flag and defined enums for the supported kthread work actions. Lastly, the if/else logic is replaced with a switch statement. Signed-off-by:
-
Tyrel Datwyler authored
Wire up the host_reset function in our driver_template to allow a user requested adpater reset via the host_reset sysfs attribute. Example: echo "adapter" > /sys/class/scsi_host/host0/host_reset Signed-off-by:
-
James Smart authored
Update lpfc version to 12.2.0.3 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Kernel warnings may be seen with preempt debugging enabled. Replace smp_processor_id calls with raw_smp_processor_id or cpu information stored in hdwq structures. Signed-off-by:
-
James Smart authored
Crashes in scsi_queue_rq or in dma_unmap_direct_sg during BFS when lpfc has lpfc_enable_bg=1. lpfc is setting DIX and prot sg after scsi_add_host_with_dma() has been called. The scsi_host_set_prot() and scsi_host_set_guard() routines need to be called before scsi_add_host_with_dma(). Revise the calling sequence to set the protection/guard data before calling scsi_add_host_with_dma(). Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
James Smart authored
FDMI protocol support registration was not accurately showing nvme support. The fcponly-path clears the parameter object. Move the code out of the fcponly code path. Fix the FDMI registration data to properly check for nvme support. Commonize the manner in which the fdmi routines set protocol support. Signed-off-by:
-
James Smart authored
Issuing a LUN reset was resulting in a command failure which then escalated to a host reset. The FCP-4 spec allows fcp_rsp_len field to specify the number of valid bytes of FCP_RSP_INFO, and the value could be 4 or 8. The driver is allowing only a value of 8, thus it failed the command. Revise the driver to allow 4 or 8. Signed-off-by:
-
James Smart authored
While fixing the resources per socket, realized the driver was not using hardware queues (up to 1 per cpu) if there were fewer interrupt vectors. The driver was only using the hardware queue assigned to the cpu with the vector. Rework the affinity map check to use the additional hardware queue elements that had been allocated. If the cpu count exceeds the hardware queue count - share, but choose what is shared with by: hyperthread peer, core peer, socket peer, or finally similar cpu in a different socket. Signed-off-by:
-
James Smart authored
The driver was coded expecting enough hardware queues and interrupt vectors such that at least there was one per socket. In the case where there were fewer than sockets, cpus were left unassigned thus null pointers. Rework the affinity mappings. Map settings for the cpu's that are in the irq cpu mask. For each cpu not in the mask, map to another cpu that does have a mask. Choice of the "other" cpu will attempt to map to the same cpu but differing hyperthread, or cpu within in same core, or cpu within same socket, or finally cpu in the base socket. Signed-off-by:
-
