Pull crypto fixes from Herbert Xu:
 "This fixes a functional bug in arm/chacha-neon as well as a potential
  buffer overflow in ecdh"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ecdh - avoid buffer overflow in ecdh_set_secret()
  crypto: arm/chacha-neon - add missing counter increment

The kernel test robot reported a -5.8% performance regression on the
"poll2" test of will-it-scale, and bisected it to commit d55564cf
("x86: Make __put_user() generate an out-of-line call").

I didn't expect an out-of-line __put_user() to matter, because no normal
core code should use that non-checking legacy version of user access any
more.  But I had overlooked the very odd poll() usage, which does a
__put_user() to update the 'revents' values of the poll array.

Now, Al Viro correctly points out that instead of updating just the
'revents' field, it would be much simpler to just copy the _whole_
pollfd entry, and then we could just use "copy_to_user()" on the whole
array of entries, the same way we use "copy_from_user()" a few lines
earlier to get the original values.

But that is not what we've traditionally done, and I worry that threaded
applications might be concurrently modifying the other fields of the
pollfd array.  So while Al's suggestion is simpler - and perhaps worth
trying in the future - this instead keeps the "just update revents"
model.

To fix the performance regression, use the modern "unsafe_put_user()"
instead of __put_user(), with the proper "user_write_access_begin()"
guarding in place. This improves code generation enormously.

Link: https://lore.kernel.org/lkml/20210107134723.GA28532@xsang-OptiPlex-9020/Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Laight <David.Laight@aculab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 757055ae.

The commit caused that ttynull was used as the default console
on several systems[1][2][3]. As a result, the console was
blank even when a better alternative existed.

It happened when there was no console configured
on the command line and ttynull_init() was the first initcall
calling register_console().

Or it happened when /dev/ did not exist when console_on_rootfs()
was called. It was not able to open /dev/console even though
a console driver was registered. It tried to add ttynull console
but it obviously did not help. But ttynull became the preferred
console and was used by /dev/console when it was available later.

The commit tried to fix a historical problem that have been there
for ages. The primary motivation was the commit 3cffa06a
("printk/console: Allow to disable console output by using console=""
 or console=null"). It provided a clean solution for a workaround
 that was widely used and worked only by chance.

This revert causes that the console="" or console=null command line
options will again work only by chance. These options will cause that
a particular console will be preferred and the default (tty) ones
will not get enabled. There will be no console registered at
all. As a result there won't be stdin, stdout, and stderr for
the init process. But it worked exactly this way even before.

The proper solution has to fulfill many conditions:

  + Register ttynull only when explicitly required or as
    the ultimate fallback.

  + ttynull should get associated with /dev/console but it must
    not become preferred console when used as a fallback.
    Especially, it must still be possible to replace it
    by a better console later.

Such a change requires clean up of the register_console() code.
Otherwise, it would be even harder to follow. Especially, the use
of has_preferred_console and CON_CONSDEV flag is tricky. The clean
up is risky. The ordering of consoles is not well defined. And
any changes tend to break existing user settings.

Do the revert at the least risky solution for now.

[1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/
[2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/
[3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Vineet Gupta <vgupta@synopsys.com>
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull gcc-plugins fix from Kees Cook:
 "Bump c++ standard version for latest GCC versions (Valdis Kletnieks)"

* tag 'gcc-plugins-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: fix gcc 11 indigestion with plugins...

Pull spi fixes from Mark Brown:
 "A couple of core fixes here, both to do with handling of drivers which
  don't report their maximum speed since we factored some of the
  handling for transfer speeds out into the core in the previous
  release.

  There's also some driver specific fixes, including a relatively large
  set for some races around timeouts in spi-geni-qcom"

* tag 'spi-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fix the divide by 0 error when calculating xfer waiting time
  spi: Fix the clamping of spi->max_speed_hz
  spi: altera: fix return value for altera_spi_txrx()
  spi: stm32: FIFO threshold level - fix align packet size
  spi: spi-geni-qcom: Print an error when we timeout setting the CS
  spi: spi-geni-qcom: Don't try to set CS if an xfer is pending
  spi: spi-geni-qcom: Fail new xfers if xfer/cancel/abort pending
  spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in timeout case

Merge tag 'regulator-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A few minor driver specific fixes, mostly DT bindings document bits,
  plus a new device ID"

* tag 'regulator-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom-rpmh: add QCOM_COMMAND_DB dependency
  regulator: qcom-rpmh-regulator: correct hfsmps515 definition
  dt-bindings: regulator: qcom,rpmh-regulator: add pm8009 revision
  regulator: bd718x7: Add enable times
  regulator: pf8x00: Use specific compatible strings for devices

Pull regmap fixes from Mark Brown:
 "A couple of small fixes for leaks when attaching a device to a
  preexisting regmap"

* tag 'regmap-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init()
  regmap: debugfs: Fix a memory leak when calling regmap_attach_dev

Fedora Rawhide has started including gcc 11,and the g++ compiler
throws a wobbly when it hits scripts/gcc-plugins:

  HOSTCXX scripts/gcc-plugins/latent_entropy_plugin.so
In file included from /usr/include/c++/11/type_traits:35,
                 from /usr/lib/gcc/x86_64-redhat-linux/11/plugin/include/system.h:244,
                 from /usr/lib/gcc/x86_64-redhat-linux/11/plugin/include/gcc-plugin.h:28,
                 from scripts/gcc-plugins/gcc-common.h:7,
                 from scripts/gcc-plugins/latent_entropy_plugin.c:78:
/usr/include/c++/11/bits/c++0x_warning.h:32:2: error: #error This file requires compiler and library support for the ISO
 C++ 2011 standard. This support must be enabled with the -std=c++11 or -std=gnu++11 compiler options.
   32 | #error This file requires compiler and library support \

In fact, it works just fine with c++11, which has been in gcc since 4.8,
and we now require 4.9 as a minimum.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/82487.1609006918@turing-police

Pull btrfs fixes from David Sterba:
 "A few more fixes that arrived before the end of the year:

   - a bunch of fixes related to transaction handle lifetime wrt various
     operations (umount, remount, qgroup scan, orphan cleanup)

   - async discard scheduling fixes

   - fix item size calculation when item keys collide for extend refs
     (hardlinks)

   - fix qgroup flushing from running transaction

   - fix send, wrong file path when there is an inode with a pending
     rmdir

   - fix deadlock when cloning inline extent and low on free metadata
     space"

* tag 'for-5.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: run delayed iputs when remounting RO to avoid leaking them
  btrfs: add assertion for empty list of transactions at late stage of umount
  btrfs: fix race between RO remount and the cleaner task
  btrfs: fix transaction leak and crash after cleaning up orphans on RO mount
  btrfs: fix transaction leak and crash after RO remount caused by qgroup rescan
  btrfs: merge critical sections of discard lock in workfn
  btrfs: fix racy access to discard_ctl data
  btrfs: fix async discard stall
  btrfs: tests: initialize test inodes location
  btrfs: send: fix wrong file path when there is an inode with a pending rmdir
  btrfs: qgroup: don't try to wait flushing if we're already holding a transaction
  btrfs: correctly calculate item size used when item key collision happens
  btrfs: fix deadlock when cloning inline extent and low on free metadata space

Pull vhost bugfix from Michael Tsirkin:
 "This fixes configs with vhost vsock behind a viommu"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost/vsock: add IOTLB API support

Pull sound fixes from Takashi Iwai:
 "Here is a collection of USB- and HD-audio fixes.

  Most of them are device-specific quirks while one fix is for a
  regression due to an incorrect mutex unlock introduced in this merge
  window"

* tag 'sound-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/via: Fix runtime PM for Clevo W35xSS
  ALSA: usb-audio: Add quirk for RC-505
  ALSA: hda/hdmi: Fix incorrect mutex unlock in silent_stream_disable()
  ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7
  ALSA: hda/realtek: Add two "Intel Reference board" SSID in the ALC256.
  ALSA: hda/realtek: Add mute LED quirk for more HP laptops
  ALSA: hda/conexant: add a new hda codec CX11970
  ALSA: usb-audio: Add quirk for BOSS AD-10
  ALSA: usb-audio: Fix UBSAN warnings for MIDI jacks
  ALSA: hda/realtek - Modify Dell platform name
  ALSA: hda/realtek - Fix speaker volume control on Lenovo C940

Pull ARC updates from Vineet Gupta:
 "Things are quieter on upstreaming front as we are mostly focusing on
  ARCv3/ARC64 port.

  This contains just build system updates from Masahiro Yamada"

* tag 'arc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: build: use $(READELF) instead of hard-coded readelf
  ARC: build: remove unneeded extra-y
  ARC: build: move symlink creation to arch/arc/Makefile to avoid race
  ARC: build: add boot_targets to PHONY
  ARC: build: add uImage.lzma to the top-level target
  ARC: build: remove non-existing bootpImage from KBUILD_IMAGE

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from netfilter, wireless and bpf
  trees.

  Current release - regressions:

   - mt76: fix NULL pointer dereference in mt76u_status_worker and
     mt76s_process_tx_queue

   - net: ipa: fix interconnect enable bug

  Current release - always broken:

   - netfilter: fixes possible oops in mtype_resize in ipset

   - ath11k: fix number of coding issues found by static analysis tools
     and spurious error messages

  Previous releases - regressions:

   - e1000e: re-enable s0ix power saving flows for systems with the
     Intel i219-LM Ethernet controllers to fix power use regression

   - virtio_net: fix recursive call to cpus_read_lock() to avoid a
     deadlock

   - ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()

   - sysfs: take the rtnl lock around XPS configuration

   - xsk: fix memory leak for failed bind and rollback reservation at
     NETDEV_TX_BUSY

   - r8169: work around power-saving bug on some chip versions

  Previous releases - always broken:

   - dcb: validate netlink message in DCB handler

   - tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
     to prevent unnecessary retries

   - vhost_net: fix ubuf refcount when sendmsg fails

   - bpf: save correct stopping point in file seq iteration

   - ncsi: use real net-device for response handler

   - neighbor: fix div by zero caused by a data race (TOCTOU)

   - bareudp: fix use of incorrect min_headroom size and a false
     positive lockdep splat from the TX lock

   - mvpp2:
      - clear force link UP during port init procedure in case
        bootloader had set it
      - add TCAM entry to drop flow control pause frames
      - fix PPPoE with ipv6 packet parsing
      - fix GoP Networking Complex Control config of port 3
      - fix pkt coalescing IRQ-threshold configuration

   - xsk: fix race in SKB mode transmit with shared cq

   - ionic: account for vlan tag len in rx buffer len

   - stmmac: ignore the second clock input, current clock framework does
     not handle exclusive clock use well, other drivers may reconfigure
     the second clock

  Misc:

   - ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
     existing scheme"

* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
  net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
  net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
  net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
  r8169: work around power-saving bug on some chip versions
  net: usb: qmi_wwan: add Quectel EM160R-GL
  selftests: mlxsw: Set headroom size of correct port
  net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
  ibmvnic: fix: NULL pointer dereference.
  docs: networking: packet_mmap: fix old config reference
  docs: networking: packet_mmap: fix formatting for C macros
  vhost_net: fix ubuf refcount incorrectly when sendmsg fails
  bareudp: Fix use of incorrect min_headroom size
  bareudp: set NETIF_F_LLTX flag
  net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
  atlantic: remove architecture depends
  erspan: fix version 1 check in gre_parse_header()
  net: hns: fix return value check in __lb_other_process()
  net: sched: prevent invalid Scell_log shift count
  net: neighbor: fix a crash caused by mod zero
  ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
  ...

Pull AFS fixes from David Howells:
 "Two fixes.

  The first is the fix for the strnlen() array limit check and the
  second fixes the calculation of the number of dirent records used to
  represent any particular filename length"

* tag 'afs-fixes-04012021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix directory entry size calculation
  afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y

Ever since commit 2a9127fc ("mm: rewrite wait_on_page_bit_common()
logic") we've had some very occasional reports of BUG_ON(PageWriteback)
in write_cache_pages(), which we thought we already fixed in commit
073861ed ("mm: fix VM_BUG_ON(PageTail) and BUG_ON(PageWriteback)").

But syzbot just reported another one, even with that commit in place.

And it turns out that there's a simpler way to trigger the BUG_ON() than
the one Hugh found with page re-use.  It all boils down to the fact that
the page writeback is ostensibly serialized by the page lock, but that
isn't actually really true.

Yes, the people _setting_ writeback all do so under the page lock, but
the actual clearing of the bit - and waking up any waiters - happens
without any page lock.

This gives us this fairly simple race condition:

  CPU1 = end previous writeback
  CPU2 = start new writeback under page lock
  CPU3 = write_cache_pages()

  CPU1          CPU2            CPU3
  ----          ----            ----

  end_page_writeback()
    test_clear_page_writeback(page)
    ... delayed...

                lock_page();
                set_page_writeback()
                unlock_page()

                                lock_page()
                                wait_on_page_writeback();

    wake_up_page(page, PG_writeback);
    .. wakes up CPU3 ..

                                BUG_ON(PageWriteback(page));

where the BUG_ON() happens because we woke up the PG_writeback bit
becasue of the _previous_ writeback, but a new one had already been
started because the clearing of the bit wasn't actually atomic wrt the
actual wakeup or serialized by the page lock.

The reason this didn't use to happen was that the old logic in waiting
on a page bit would just loop if it ever saw the bit set again.

The nice proper fix would probably be to get rid of the whole "wait for
writeback to clear, and then set it" logic in the writeback path, and
replace it with an atomic "wait-to-set" (ie the same as we have for page
locking: we set the page lock bit with a single "lock_page()", not with
"wait for lock bit to clear and then set it").

However, out current model for writeback is that the waiting for the
writeback bit is done by the generic VFS code (ie write_cache_pages()),
but the actual setting of the writeback bit is done much later by the
filesystem ".writepages()" function.

IOW, to make the writeback bit have that same kind of "wait-to-set"
behavior as we have for page locking, we'd have to change our roughly
~50 different writeback functions.  Painful.

Instead, just make "wait_on_page_writeback()" loop on the very unlikely
situation that the PG_writeback bit is still set, basically re-instating
the old behavior.  This is very non-optimal in case of contention, but
since we only ever set the bit under the page lock, that situation is
controlled.

Reported-by: syzbot+2fc0712f8f8b8b8fa0ef@syzkaller.appspotmail.com
Fixes: 2a9127fc ("mm: rewrite wait_on_page_bit_common() logic")
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This code will leak "map->debugfs_name" because the if statement is
reversed so it only frees NULL pointers instead of non-NULL.  In
fact the if statement is not required and should just be removed
because kfree() accepts NULL pointers.

Fixes: cffa4b21 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X/RQpfAwRdLg0GqQ@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Missing sanitization of rateest userspace string, bug has been
   triggered by syzbot, patch from Florian Westphal.

2) Report EOPNOTSUPP on missing set features in nft_dynset, otherwise
   error reporting to userspace via EINVAL is misleading since this is
   reserved for malformed netlink requests.

3) New binaries with old kernels might silently accept several set
   element expressions. New binaries set on the NFT_SET_EXPR and
   NFT_DYNSET_F_EXPR flags to request for several expressions per
   element, hence old kernels which do not support for this bail out
   with EOPNOTSUPP.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: nftables: add set expression flags
  netfilter: nft_dynset: report EOPNOTSUPP on missing set feature
  netfilter: xt_RATEEST: reject non-null terminated string from userspace
====================

Link: https://lore.kernel.org/r/20210103192920.18639-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Martin Blumenstingl says:

====================
net: dsa: lantiq_gswip: two fixes for -net/-stable

While testing the lantiq_gswip driver in OpenWrt at least one board had
a non-working Ethernet port connected to an internal 100Mbit/s PHY22F
GPHY. The problem which could be observed:
- the PHY would detect the link just fine
- ethtool stats would see the TX counter rise
- the RX counter in ethtool was stuck at zero

It turns out that two independent patches are needed to fix this:
- first we need to enable the MII data lines also for internal PHYs
- second we need to program the GSWIP_MII_CFG registers for all ports
  except the CPU port

These two patches have also been tested by back-porting them on top of
Linux 5.4.86 in OpenWrt.

Special thanks to Hauke for debugging and brainstorming this on IRC
with me!
====================

Link: https://lore.kernel.org/r/20210103012544.3259029-1-martin.blumenstingl@googlemail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is one GSWIP_MII_CFG register for each switch-port except the CPU
port. The register offset for the first port is 0x0, 0x02 for the
second, 0x04 for the third and so on.

Update the driver to not only restrict the GSWIP_MII_CFG registers to
ports 0, 1 and 5. Handle ports 0..5 instead but skip the CPU port. This
means we are not overwriting the configuration for the third port (port
two since we start counting from zero) with the settings for the sixth
port (with number five) anymore.

The GSWIP_MII_PCDU(p) registers are not updated because there's really
only three (one for each of the following ports: 0, 1, 5).

Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Enable GSWIP_MII_CFG_EN also for internal PHYs to make traffic flow.
Without this the PHY link is detected properly and ethtool statistics
for TX are increasing but there's no RX traffic coming in.

Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Suggested-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In lapb_device_event, lapb_devtostruct is called to get a reference to
an object of "struct lapb_cb". lapb_devtostruct increases the refcount
of the object and returns a pointer to it. However, we didn't decrease
the refcount after we finished using the pointer. This patch fixes this
problem.

Fixes: a4989fa9 ("net/lapb: support netdev events")
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201231174331.64539-1-xie.he.0141@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A user reported failing network with RTL8168dp (a quite rare chip
version). Realtek confirmed that few chip versions suffer from a PLL
power-down hw bug.

Fixes: 07df5bd8 ("r8169: power down chip in probe")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/a1c39460-d533-7f9e-fa9d-2b8990b02426@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

New modem using ff/ff/30 for QCDM, ff/00/00 for  AT and NMEA,
and ff/ff/ff for RMNET/QMI.

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=2c7c ProdID=0620 Rev= 4.09
S: Manufacturer=Quectel
S: Product=EM160R-GL
S: SerialNumber=e31cedc1
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20201230152451.245271-1-bjorn@mork.noSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The test was setting the headroom size of the wrong port. This was not
visible because of a firmware bug that canceled this bug.

Set the headroom size of the correct port, so that the test will pass
with both old and new firmware versions.

Fixes: bfa80478 ("selftests: mlxsw: Add a PFC test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20201230114251.394009-1-idosch@idosch.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of
macb_set_tx_clk were gated on the presence of this flag.

-   if (!clk)
+ if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))

However the flag was not added to anything other than the new
sama7g5_gem, turning that function call into a no op for all other
systems. This breaks the networking on Zynq.

The commit message adding this states: a new capability so that
macb_set_tx_clock() to not be called for IPs having this
capability

This strongly implies that present of the flag was intended to skip
the function not absence of the flag. Update the if statement to
this effect, which repairs the existing users.

Fixes: daafa1d3 ("net: macb: add capability to not set the clock rate")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210104103802.13091-1-ckeepax@opensource.cirrus.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The error is due to dereference a null pointer in function
reset_one_sub_crq_queue():

if (!scrq) {
    netdev_dbg(adapter->netdev,
               "Invalid scrq reset. irq (%d) or msgs(%p).\n",
		scrq->irq, scrq->msgs);
		return -EINVAL;
}

If the expression is true, scrq must be a null pointer and cannot
dereference.

Fixes: 9281cf2d ("ibmvnic: avoid memset null scrq msgs")
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Reported-by: Abaci <abaci@linux.alibaba.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/1609312994-121032-1-git-send-email-abaci-bugfix@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Before commit 889b8f96 ("packet: Kill CONFIG_PACKET_MMAP.") there
used to be a CONFIG_PACKET_MMAP config symbol that depended on
CONFIG_PACKET. The text still implies that PACKET_MMAP can be disabled.
Remove that from the text, as well as reference to old kernel versions.

Also, drop reference to broken link to information for pre 2.6.5
kernels.

Make a slight working improvement (s/In/On/) while at it.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/80089f3783372c8fd7833f28ce774a171b2ef252.1609232919.git.baruch@tkos.co.ilSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The citation of macro definitions should appear in a code block.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/5cb47005e7a59b64299e038827e295822193384c.1609232919.git.baruch@tkos.co.ilSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the vhost_zerocopy_callback() maybe be called to decrease
the refcount when sendmsg fails in tun. The error handling in vhost
handle_tx_zerocopy() will try to decrease the same refcount again.
This is wrong. To fix this issue, we only call vhost_net_ubuf_put()
when vq->heads[nvq->desc].len == VHOST_DMA_IN_PROGRESS.

Fixes: bab632d6 ("vhost: vhost TX zero-copy support")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/1609207308-20544-1-git-send-email-wangyunjian@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the bareudp6_xmit_skb(), it calculates min_headroom.
At that point, it uses struct iphdr, but it's not correct.
So panic could occur.
The struct ipv6hdr should be used.

Test commands:
    ip netns add A
    ip netns add B
    ip link add veth0 netns A type veth peer name veth1 netns B
    ip netns exec A ip link set veth0 up
    ip netns exec A ip a a 2001:db8:0::1/64 dev veth0
    ip netns exec B ip link set veth1 up
    ip netns exec B ip a a 2001:db8:0::2/64 dev veth1

    for i in {10..1}
    do
            let A=$i-1
            ip netns exec A ip link add bareudp$i type bareudp dstport $i \
		    ethertype 0x86dd
            ip netns exec A ip link set bareudp$i up
            ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev bareudp$i
            ip netns exec A ip -6 r a 2001:db8:$i::2 encap ip6 src \
		    2001:db8:$A::1 dst 2001:db8:$A::2 via 2001:db8:$i::2 \
		    dev bareudp$i

            ip netns exec B ip link add bareudp$i type bareudp dstport $i \
		    ethertype 0x86dd
            ip netns exec B ip link set bareudp$i up
            ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev bareudp$i
            ip netns exec B ip -6 r a 2001:db8:$i::1 encap ip6 src \
		    2001:db8:$A::2 dst 2001:db8:$A::1 via 2001:db8:$i::1 \
		    dev bareudp$i
    done
    ip netns exec A ping 2001:db8:7::2

Splat looks like:
[   66.436679][    C2] skbuff: skb_under_panic: text:ffffffff928614c8 len:454 put:14 head:ffff88810abb4000 data:ffff88810abb3ffa tail:0x1c0 end:0x3ec0 dev:veth0
[   66.441626][    C2] ------------[ cut here ]------------
[   66.443458][    C2] kernel BUG at net/core/skbuff.c:109!
[   66.445313][    C2] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   66.447606][    C2] CPU: 2 PID: 913 Comm: ping Not tainted 5.10.0+ #819
[   66.450251][    C2] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[   66.453713][    C2] RIP: 0010:skb_panic+0x15d/0x15f
[   66.455345][    C2] Code: 98 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 60 8b 78 93 41 57 41 56 41 55 48 8b 54 24 20 48 8b 74 24 28 e8 b5 40 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 08 c9 98 fe 8b 34 24 48 c7 c1 80
[   66.462314][    C2] RSP: 0018:ffff888119209648 EFLAGS: 00010286
[   66.464281][    C2] RAX: 0000000000000089 RBX: ffff888003159000 RCX: 0000000000000000
[   66.467216][    C2] RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed10232412c0
[   66.469768][    C2] RBP: ffff88810a53d440 R08: ffffed102328018d R09: ffffed102328018d
[   66.472297][    C2] R10: ffff888119400c67 R11: ffffed102328018c R12: 000000000000000e
[   66.474833][    C2] R13: ffff88810abb3ffa R14: 00000000000001c0 R15: 0000000000003ec0
[   66.477361][    C2] FS:  00007f37c0c72f00(0000) GS:ffff888119200000(0000) knlGS:0000000000000000
[   66.480214][    C2] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   66.482296][    C2] CR2: 000055a058808570 CR3: 000000011039e002 CR4: 00000000003706e0
[   66.484811][    C2] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   66.487793][    C2] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   66.490424][    C2] Call Trace:
[   66.491469][    C2]  <IRQ>
[   66.492374][    C2]  ? eth_header+0x28/0x190
[   66.494054][    C2]  ? eth_header+0x28/0x190
[   66.495401][    C2]  skb_push.cold.99+0x22/0x22
[   66.496700][    C2]  eth_header+0x28/0x190
[   66.497867][    C2]  neigh_resolve_output+0x3de/0x720
[   66.499615][    C2]  ? __neigh_update+0x7e8/0x20a0
[   66.501176][    C2]  __neigh_update+0x8bd/0x20a0
[   66.502749][    C2]  ndisc_update+0x34/0xc0
[   66.504010][    C2]  ndisc_recv_na+0x8da/0xb80
[   66.505041][    C2]  ? pndisc_redo+0x20/0x20
[   66.505888][    C2]  ? rcu_read_lock_sched_held+0xc0/0xc0
[   66.506965][    C2]  ndisc_rcv+0x3a0/0x470
[   66.507797][    C2]  icmpv6_rcv+0xad9/0x1b00
[   66.508645][    C2]  ip6_protocol_deliver_rcu+0xcd6/0x1560
[   66.509719][    C2]  ip6_input_finish+0x5b/0xf0
[   66.510615][    C2]  ip6_input+0xcd/0x2d0
[   66.511406][    C2]  ? ip6_input_finish+0xf0/0xf0
[   66.512327][    C2]  ? rcu_read_lock_held+0x91/0xa0
[   66.513279][    C2]  ? ip6_protocol_deliver_rcu+0x1560/0x1560
[   66.514414][    C2]  ipv6_rcv+0xe8/0x300
[ ... ]
Acked-by: Guillaume Nault <gnault@redhat.com>
Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20201228152146.24270-1-ap420073@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Like other tunneling interfaces, the bareudp doesn't need TXLOCK.
So, It is good to set the NETIF_F_LLTX flag to improve performance and
to avoid lockdep's false-positive warning.

Test commands:
    ip netns add A
    ip netns add B
    ip link add veth0 netns A type veth peer name veth1 netns B
    ip netns exec A ip link set veth0 up
    ip netns exec A ip a a 10.0.0.1/24 dev veth0
    ip netns exec B ip link set veth1 up
    ip netns exec B ip a a 10.0.0.2/24 dev veth1

    for i in {2..1}
    do
            let A=$i-1
            ip netns exec A ip link add bareudp$i type bareudp \
		    dstport $i ethertype ip
            ip netns exec A ip link set bareudp$i up
            ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i
            ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \
		    dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i

            ip netns exec B ip link add bareudp$i type bareudp \
		    dstport $i ethertype ip
            ip netns exec B ip link set bareudp$i up
            ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i
            ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \
		    dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i
    done
    ip netns exec A ping 10.0.2.2

Splat looks like:
[   96.992803][  T822] ============================================
[   96.993954][  T822] WARNING: possible recursive locking detected
[   96.995102][  T822] 5.10.0+ #819 Not tainted
[   96.995927][  T822] --------------------------------------------
[   96.997091][  T822] ping/822 is trying to acquire lock:
[   96.998083][  T822] ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960
[   96.999813][  T822]
[   96.999813][  T822] but task is already holding lock:
[   97.001192][  T822] ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960
[   97.002908][  T822]
[   97.002908][  T822] other info that might help us debug this:
[   97.004401][  T822]  Possible unsafe locking scenario:
[   97.004401][  T822]
[   97.005784][  T822]        CPU0
[   97.006407][  T822]        ----
[   97.007010][  T822]   lock(_xmit_NONE#2);
[   97.007779][  T822]   lock(_xmit_NONE#2);
[   97.008550][  T822]
[   97.008550][  T822]  *** DEADLOCK ***
[   97.008550][  T822]
[   97.010057][  T822]  May be due to missing lock nesting notation
[   97.010057][  T822]
[   97.011594][  T822] 7 locks held by ping/822:
[   97.012426][  T822]  #0: ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00
[   97.014191][  T822]  #1: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020
[   97.016045][  T822]  #2: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960
[   97.017897][  T822]  #3: ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960
[   97.019684][  T822]  #4: ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp]
[   97.021573][  T822]  #5: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020
[   97.023424][  T822]  #6: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960
[   97.025259][  T822]
[   97.025259][  T822] stack backtrace:
[   97.026349][  T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ #819
[   97.027609][  T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[   97.029407][  T822] Call Trace:
[   97.030015][  T822]  dump_stack+0x99/0xcb
[   97.030783][  T822]  __lock_acquire.cold.77+0x149/0x3a9
[   97.031773][  T822]  ? stack_trace_save+0x81/0xa0
[   97.032661][  T822]  ? register_lock_class+0x1910/0x1910
[   97.033673][  T822]  ? register_lock_class+0x1910/0x1910
[   97.034679][  T822]  ? rcu_read_lock_sched_held+0x91/0xc0
[   97.035697][  T822]  ? rcu_read_lock_bh_held+0xa0/0xa0
[   97.036690][  T822]  lock_acquire+0x1b2/0x730
[   97.037515][  T822]  ? __dev_queue_xmit+0x1f52/0x2960
[   97.038466][  T822]  ? check_flags+0x50/0x50
[   97.039277][  T822]  ? netif_skb_features+0x296/0x9c0
[   97.040226][  T822]  ? validate_xmit_skb+0x29/0xb10
[   97.041151][  T822]  _raw_spin_lock+0x30/0x70
[   97.041977][  T822]  ? __dev_queue_xmit+0x1f52/0x2960
[   97.042927][  T822]  __dev_queue_xmit+0x1f52/0x2960
[   97.043852][  T822]  ? netdev_core_pick_tx+0x290/0x290
[   97.044824][  T822]  ? mark_held_locks+0xb7/0x120
[   97.045712][  T822]  ? lockdep_hardirqs_on_prepare+0x12c/0x3e0
[   97.046824][  T822]  ? __local_bh_enable_ip+0xa5/0xf0
[   97.047771][  T822]  ? ___neigh_create+0x12a8/0x1eb0
[   97.048710][  T822]  ? trace_hardirqs_on+0x41/0x120
[   97.049626][  T822]  ? ___neigh_create+0x12a8/0x1eb0
[   97.050556][  T822]  ? __local_bh_enable_ip+0xa5/0xf0
[   97.051509][  T822]  ? ___neigh_create+0x12a8/0x1eb0
[   97.052443][  T822]  ? check_chain_key+0x244/0x5f0
[   97.053352][  T822]  ? rcu_read_lock_bh_held+0x56/0xa0
[   97.054317][  T822]  ? ip_finish_output2+0x6ea/0x2020
[   97.055263][  T822]  ? pneigh_lookup+0x410/0x410
[   97.056135][  T822]  ip_finish_output2+0x6ea/0x2020
[ ... ]
Acked-by: Guillaume Nault <gnault@redhat.com>
Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20201228152136.24215-1-ap420073@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull RCU fix from Paul McKenney:
 "This is a fix for a regression in the v5.10 merge window, but it was
  reported quite late in the v5.10 process, plus generating and testing
  the fix took some time.

  The regression is due to commit 36dadef2 ("kprobes: Init kprobes
  in early_initcall") which on powerpc can use RCU Tasks before
  initialization, resulting in boot failures.

  The fix is straightforward, simply moving initialization of RCU Tasks
  before the early_initcall()s. The fix has been exposed to -next and
  kbuild test robot testing, and has been tested by the PowerPC guys"

* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu-tasks: Move RCU-tasks initialization to before early_initcall()

Pull ENABLE_MUST_CHECK removal from Miguel Ojeda:
 "Remove CONFIG_ENABLE_MUST_CHECK (Masahiro Yamada)"

Note that this removes the config option by making the must-check
unconditional, not by removing must check itself.

* tag 'compiler-attributes-for-linus-v5.11' of git://github.com/ojeda/linux:
  Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK

Clevo W35xSS_370SS with VIA codec has had the runtime PM problem that
looses the power state of some nodes after the runtime resume.  This
was worked around by disabling the default runtime PM via a denylist
entry.  Since 5.10.x made the runtime PM applied (casually) even
though it's disabled in the denylist, this problem was revisited.  The
result was that disabling power_save_node feature suffices for the
runtime PM problem.

This patch implements the disablement of power_save_node feature in
VIA codec for the device.  It also drops the former denylist entry,
too, as the runtime PM should work in the codec side properly now.

Fixes: b529ef24 ("ALSA: hda: Add Clevo W35xSS_370SS to the power_save blacklist")
Reported-by: Christian Labisch <clnetbox@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210104153046.19993-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

A built-in regulator driver cannot link against a modular cmd_db driver:

qcom-rpmh-regulator.c:(.text+0x174): undefined reference to `cmd_db_read_addr'

There is already a dependency for RPMh, so add another one of this
type for cmd_db.

Fixes: 34c5aa26 ("regulator: Kconfig: Fix REGULATOR_QCOM_RPMH dependencies to avoid build error")
Fixes: 46fc033e ("regulator: add QCOM RPMh regulator driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201230145712.3133110-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

According to the datasheet pm8009's HFS515 regulators have 16mV
resolution rather than declared 1.6 mV. Correct the resolution.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 06369bcc ("regulator: qcom-rpmh: Add support for SM8150")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

PMIC pm8009 has special revision (P=1) made for sm8250 platform. The
major difference is the S2 regulator which supplies 0.95 V instead of
2.848V. Add special compatibility string for this chip revision.
The datasheet calls the chip just pm8009-1, so use the same name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-2-dmitry.baryshkov@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The xfer waiting time is the result of xfer->len / xfer->speed_hz. This
patch makes the assumption of 100khz xfer speed if the xfer->speed_hz is
not assigned and stays 0. This avoids the divide by 0 issue and ensures
a reasonable tolerant waiting time.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/1609723749-3557-1-git-send-email-yilun.xu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The number of dirent records used by an AFS directory entry should be
calculated using the assumption that there is a 16-byte name field in the
first block, rather than a 20-byte name field (which is actually the case).
This miscalculation is historic and effectively standard, so we have to use
it.

The calculation we need to use is:

	1 + (((strlen(name) + 1) + 15) >> 5)

where we are adding one to the strlen() result to account for the NUL
termination.

Fix this by the following means:

 (1) Create an inline function to do the calculation for a given name
     length.

 (2) Use the function to calculate the number of records used for a dirent
     in afs_dir_iterate_block().

     Use this to move the over-end check out of the loop since it only
     needs to be done once.

     Further use this to only go through the loop for the 2nd+ records
     composing an entry.  The only test there now is for if the record is
     allocated - and we already checked the first block at the top of the
     outer loop.

 (3) Add a max name length check in afs_dir_iterate_block().

 (4) Make afs_edit_dir_add() and afs_edit_dir_remove() use the function
     from (1) to calculate the number of blocks rather than doing it
     incorrectly themselves.

Fixes: 63a4681f ("afs: Locally edit directory data for mkdir/create/unlink/...")
Fixes: ^1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>