sparse spots

drivers/gpu/drm/i915/gvt/opregion.c:234 alloc_and_init_virt_opregion() error: memcpy() 'header->signature' too small (16 vs 17)

as gvt is indeed trying to memcpy a string longer than the signature[].

Fixes: b2d6ef70 ("drm/i915/gvt: Let each vgpu has separate opregion memory")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Xiong Zhang <xiong.y.zhang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drivers/gpu/drm/i915/gvt/execlist.c:531:6: warning: symbol 'clean_execlist' was not declared. Should it be static?
drivers/gpu/drm/i915/gvt/execlist.c:545:6: warning: symbol 'reset_execlist' was not declared. Should it be static?
drivers/gpu/drm/i915/gvt/execlist.c:556:5: warning: symbol 'init_execlist' was not declared. Should it be static?
drivers/gpu/drm/i915/gvt/scheduler.c:248:6: warning: symbol 'release_shadow_wa_ctx' was not declared. Should it be static?

References: 06bb372f ("drm/i915/gvt: Introduce intel_vgpu_reset_submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Previously the performance is improved through the workload auditing
and shadowing ahead of vGPU scheduling, however, there is the case that
more requests are allocated in submit_context before the previous request
is added, the timeline will hold its seqno which is later.

This patch is to move the request alloc to dispatch_workload function,
where is the same place as request is added.

It will fix the issue of kernel BUG for (timeline->seqno != request->fence.seqno)
check when add_request.

Fixes: 89ea20b9 ("drm/i915/gvt: Factor out scan and shadow from workload dispatch")
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Currently every vgpu share a common gvt opregion memory, but
it is freed at vgpu destroy, then the later vgpu doesn't have
opregion memory once the first vgpu is destroyed. This cause
guest function failure like reboot, second or later boot.

This patch allocate and init virt opregion memory for each
vgpu, so this memory could be freed at vgpu destroy.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

mmio_read_from_hw() let vgpu could read hw reg, if vgpu's workload
is running on hw, things is good. Otherwise vgpu will get other
vgpu's reg val, it is unsafe.

This patch limit such hw access to active vgpu. If vgpu isn't
running on hw, the reg read of this vgpu will get the last active
val which saved at schedule_out.

v2: ring timestamp is walking continuously even if the ring is idle.
    so read hw directly. (Zhenyu)
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

This reverts commit b20d09886fd1b74cd2255d846029a049e524db14.

This caused windows driver boot errors for invalid page address.
Revert for now.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Our vGPU doesn't have a device ROM, we need follow the PCI spec to
report this info to drivers. Otherwise, we would see below errors.

Inspecting possible rom at 0xfe049000 (vd=8086:1912 bdf=00:10.0)
qemu-system-x86_64: vfio-pci: Cannot read device rom at 00000000-0000-0000-0000-000000000001
Device option ROM contents are probably invalid (check dmesg).
Skip option ROM probe with rombar=0, or load from file with romfile=No option rom signature (got 4860)

I will also send a improvement patch to PCI subsystem related to PCI ROM.
But no idea to omit below error, since no pattern to detect vbios shadow
without touch its content.
0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

gvt_vgpu_err means something goes wrong. We need the error propagates to
kernel message by default.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

I have seen the cmd parser dump partial odd info. Stop that and only dump
the full verbose info when debug enabled.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Use I915_WRITE_FW instead of I915_WRITE to reduce overhead.
The overall mmio switch latency lowers from ~600us to ~180us.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

gvt-linux.git repo is moved for its new place under
https://github.com/intel/gvt-linux.git

Old https://github.com/01org/gvt-linux.git is set
only for redirect now.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

This new debugfs entry is used to figure out which registers of vGPU
is different to host. It is a useful tool for new platform enabling
and debugging. When read this entry, all the diff mmio are recognized
and sorted by mmio offset. Besides, the bit positions of different
value are listed in 'Diff' column. Here is a show:

$ sudo cat ./mmio_diff
Offset   HW       vGPU     Diff
00002030 000025f8 00000000 3-8,10,13
00002034 012025f8 00000000 3-8,10,13,21,24
00002038 027fb000 00000000 12-13,15-22,25
0000203c 00003000 00000000 12-13
00002054 0000000a 00000040 1,3,6
00002074 012025f8 00000000 3-8,10,13,21,24
00002080 fffe6000 00000000 13-14,17-31
000020a8 fffffeff ffffffff 8
000020d4 00000004 00000000 2
....
00145974 eb42718c 010c11b0 2-5,13-14,17-19,22,25,27,29-31
00145978 0000002f 0000002a 0,2
0014597c 0000002f 0000002a 0,2
00145980 0000002b 00000028 0-1
00145984 a5a87c9e b27d20c0 1-4,6,10-12,14,16,18,20,22-26,28
001459c0 88390000 883c0000 16,18
00146200 88350000 883a0000 16-19
Total: 72432, Diff: 901

v3: fix a typo.
v2: add mmio_hw_access_pre/post().
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

This patch add a function intel_gvt_for_each_tracked_mmio() to
iterate each tracked mmio. The caller don't be aware of how the
tracked mmios are presented internally.

v2: remove snapshot_hw_mmio_registers().
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

this is an enhanced opregion emulation for win guest support
by initializing more data members including opregion header
size, version and child device propertity for display port.
for simplicity, redefined child_device_config structure.
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

The engine provides a mirror of the CSB and CSB write pointer in the HWSP.
Read these status from virtual HWSP in VM can reduce CPU utilization while
applications have much more short GPU workloads. Here we update the
corresponding data in virtual HWSP as it in virtual MMIO.

Before read these status from HWSP in GVT-g VM, please ensure the host
support it by checking the BIT(3) of caps in PVINFO.

Virtual HWSP only support GEN8+ platform, since the HWSP MMIO may change
follow the platform update, please add the corresponding MMIO emulation
when enable new platforms in GVT-g.

v3 : Add address audit in HWSP address update.

v4 :
     Separate this patch with enalbe virtual HWSP in VM.
     Use intel_gvt_render_mmio_to_ring_id() to determine ring_id by offset.

v5 : Remove unnessary check about Gen8, GVT-g only support Gen8+.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Refine previously broken PPGTT scratch. Scratch PTE was no correctly
handled and also the handling of scratch entries in page table walk was
not well organized, which brings gaps of introducing lazy shadow.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

We need ops->set_present() during generating a new scratch page table
entry.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Need to figure out page table type of current level by GTT entry type
during getting a scratch page table entry.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

During a vGPU reset, the scratch page table shouldn't be cleared, what
needs to be cleared should be the scratch page.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

As we want to re-use intel_vgpu_shadow_page in buidling scrach page table
and we don't want to put scrach page table page into hash table, a new
param is introduced to give the caller a choice to decide if a shadow page
should be put into hash table.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

As there is already an I915_GTT_PAGE_SIZE marco in i915, let GVT-g use it
as well. Also this patch re-names some GTT marcos with additional prefix.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Since many emulation logic needs to convert the offset of ring registers
into ring id, we export it for other caller which might need it.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

As the data structure of "intel_vgpu_guest_page" will become much heavier
in future, it's better to factor out the guest memory page track mechnisim
as early as possible.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

1) Use standard i915 GEM object sequence to access the shadow batch buffer.
2) Manage i915 vma life cycle to solve one FIXME.

v2:
- Refine code structure.
- Refine the usage of GEM APIs.
- Add the missing lock/unlock in release_shadow_batch_buffer.

Test on my SKL NuC.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Returns the error code if something is wrong and the size of batch buffer
is passed through the pointer.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Replace the plain bit usage with BIT() to make klockwork happy.

Cc: Deng Hongyi <hongyi.deng@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

We need debugfs entry to expose some debug information of gvt and vGPUs.
The first tool will be added is mmio-diff, which help to find the
difference values of host and vGPU mmio. It's useful for platform
enabling.

This patch just add a basic debugfs infrastructure, each vGPU has its own
sub-folder. Two simple attributes are created as a template.
.
├── num_tracked_mmio
├── vgpu1
|   └── active
└── vgpu2
    └── active
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

all the vGPU type related code in kvmgt will be moved into
gvt.c/gvt.h files while the common vGPU type related interfaces
will be called.

v2:
- intel_gvt_{init,cleanup}_vgpu_type_groups are initialized in
  gvt part. (Wang, Zhi)
Signed-off-by: fred gao <fred.gao@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

In this patch, all the vGPU type related code will be merged into
same gvt file and the common interface will be exposed to both
XenGT and KvmGT.

v2:
- remove the useless mdev_* gvt_ops.
  add get_gvt_attr ops for MPT module.
  intel_gvt_{init,cleanup}_vgpu_type_groups are initialized in
  gvt part. (Wang, Zhi)
- set gvt_vgpu_type_groups[i] to NULL. (Zhang,Xiong)
Signed-off-by: fred gao <fred.gao@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Move clean_workloads() into scheduler.c since it's not specific to
execlist.

v2:

- Remove clean_workloads in intel_vgpu_select_submission_ops. (Zhenyu)
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Introduce an generic API to reset vGPU virtual submission interface.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Introduce vGPU submission ops to support easy switching submission mode
of one vGPU between different OSes.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Now the function has been moved into scheduler.c. The extra declaration
is not necessary.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Move common vGPU workload creation functions into scheduler.c since
they are not specific to execlist emulation.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Move common workload preparation into prepare_workload() in scheduler.c,
as they are not specific to execlist emulation.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Factor out prepare_workload() for the following re-factor.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Factor out vGPU workload creation/destroy functions since they are not
specific to execlist emulation.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

It's better enable/disable and classify gvt debug info dynamically.
This patch change it to dyndbg so can be dynamically enable/disable
each item. All gvt log can be enabled by,
 $ echo 'file *gvt* +p' > /sys/kernel/debug/dynamic_debug/control
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

An earlier fix changed the return type from find_bb_size however the
integer return is being assigned to a unsigned int so the -ve error
check will never be detected. Make bb_size an int to fix this.

Detected by CoverityScan CID#1456886 ("Unsigned compared against 0")

Fixes: 1e3197d6 ("drm/i915/gvt: Refine error handling for perform_bb_shadow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

When a scan error occurs in submit_context, this patch is to
decrease the mm ref count and free the workload struct before
the workload is abandoned.

v2:
- submit_context related code should be combined together. (Zhenyu)

v3:
- free all the unsubmitted workloads. (Zhenyu)

v4:
- refine the clean path. (Zhenyu)

v5:
- polish the title. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>