- 06 Jan, 2015 12 commits
-
-
Daniel Borkmann authored
This patch adds the minimum necessary for the RTAX_CC_ALGO congestion control metric to be set up and dumped back to user space. While the internal representation of RTAX_CC_ALGO is handled as a u32 key, we avoided to expose this implementation detail to user space, thus instead, we chose the netlink attribute that is being exchanged between user space to be the actual congestion control algorithm name, similarly as in the setsockopt(2) API in order to allow for maximum flexibility, even for 3rd party modules. It is a bit unfortunate that RTAX_QUICKACK used up a whole RTAX slot as it should have been stored in RTAX_FEATURES instead, we first thought about reusing it for the congestion control key, but it brings more complications and/or confusion than worth it. Joint work with Florian Westphal. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
This patch adds necessary infrastructure to the congestion control framework for later per route congestion control support. For a per route congestion control possibility, our aim is to store a unique u32 key identifier into dst metrics, which can then be mapped into a tcp_congestion_ops struct. We argue that having a RTAX key entry is the most simple, generic and easy way to manage, and also keeps the memory footprint of dst entries lower on 64 bit than with storing a pointer directly, for example. Having a unique key id also allows for decoupling actual TCP congestion control module management from the FIB layer, i.e. we don't have to care about expensive module refcounting inside the FIB at this point. We first thought of using an IDR store for the realization, which takes over dynamic assignment of unused key space and also performs the key to pointer mapping in RCU. While doing so, we stumbled upon the issue that due to the nature of dynamic key distribution, it just so happens, arguably in very rare occasions, that excessive module loads and unloads can lead to a possible reuse of previously used key space. Thus, previously stale keys in the dst metric are now being reassigned to a different congestion control algorithm, which might lead to unexpected behaviour. One way to resolve this would have been to walk FIBs on the actually rare occasion of a module unload and reset the metric keys for each FIB in each netns, but that's just very costly. Therefore, we argue a better solution is to reuse the unique congestion control algorithm name member and map that into u32 key space through jhash. For that, we split the flags attribute (as it currently uses 2 bits only anyway) into two u32 attributes, flags and key, so that we can keep the cacheline boundary of 2 cachelines on x86_64 and cache the precalculated key at registration time for the fast path. On average we might expect 2 - 4 modules being loaded worst case perhaps 15, so a key collision possibility is extremely low, and guaranteed collision-free on LE/BE for all in-tree modules. Overall this results in much simpler code, and all without the overhead of an IDR. Due to the deterministic nature, modules can now be unloaded, the congestion control algorithm for a specific but unloaded key will fall back to the default one, and on module reload time it will switch back to the expected algorithm transparently. Joint work with Florian Westphal. Signed-off-by:
-
Daniel Borkmann authored
We can just move this to an extra function and make the code a bit more readable, no functional change. Joint work with Florian Westphal. Signed-off-by:
-
Florian Westphal authored
Do the nla validation earlier, outside the write lock. This is needed by followup patch which needs to be able to call request_module (which can sleep) if needed. Joint work with Daniel Borkmann. Signed-off-by:
-
Daniel Borkmann authored
When IPv6 host routes with metrics attached are being added, we fetch the metrics store from the dst via COW through dst_metrics_write_ptr(), added through commit e5fd387a. One remaining problem here is that we actually call into inet_getpeer() and may end up allocating/creating a new peer from the kmemcache, which may fail. Example trace from perf probe (inet_getpeer:41) where create is 1: ip 6877 [002] 4221.391591: probe:inet_getpeer: (ffffffff8165e293) 85e294 inet_getpeer.part.7 (<- kmem_cache_alloc()) 85e578 inet_getpeer 8eb333 ipv6_cow_metrics 8f10ff fib6_commit_metrics Therefore, a check for NULL on the return of dst_metrics_write_ptr() is necessary here. Joint work with Florian Westphal. Fixes: e5fd387a ("ipv6: do not overwrite inetpeer metrics prematurely") Cc: Michal Kubeček <mkubecek@suse.cz> Signed-off-by:
-
Hubert Sokolowski authored
Add checking whether the call to ndo_dflt_fdb_dump is needed. It is not expected to call ndo_dflt_fdb_dump unconditionally by some drivers (i.e. qlcnic or macvlan) that defines own ndo_fdb_dump. Other drivers define own ndo_fdb_dump and don't want ndo_dflt_fdb_dump to be called at all. At the same time it is desirable to call the default dump function on a bridge device. Fix attributes that are passed to dev->netdev_ops->ndo_fdb_dump. Add extra checking in br_fdb_dump to avoid duplicate entries as now filter_dev can be NULL. Following tests for filtering have been performed before the change and after the patch was applied to make sure they are the same and it doesn't break the filtering algorithm. [root@localhost ~]# cd /root/iproute2-3.18.0/bridge [root@localhost bridge]# modprobe dummy [root@localhost bridge]# ./bridge fdb add f1:f2:f3:f4:f5:f6 dev dummy0 [root@localhost bridge]# brctl addbr br0 [root@localhost bridge]# brctl addif br0 dummy0 [root@localhost bridge]# ip link set dev br0 address 02:00:00:12:01:04 [root@localhost bridge]# # show all [root@localhost bridge]# ./bridge fdb show 33:33:00:00:00:01 dev p2p1 self permanent 01:00:5e:00:00:01 dev p2p1 self permanent 33:33:ff:ac:ce:32 dev p2p1 self permanent 33:33:00:00:02:02 dev p2p1 self permanent 01:00:5e:00:00:fb dev p2p1 self permanent 33:33:00:00:00:01 dev p7p1 self permanent 01:00:5e:00:00:01 dev p7p1 self permanent 33:33:ff:79:50:53 dev p7p1 self permanent 33:33:00:00:02:02 dev p7p1 self permanent 01:00:5e:00:00:fb dev p7p1 self permanent f2:46:50:85:6d:d9 dev dummy0 master br0 permanent f2:46:50:85:6d:d9 dev dummy0 vlan 1 master br0 permanent 33:33:00:00:00:01 dev dummy0 self permanent f1:f2:f3:f4:f5:f6 dev dummy0 self permanent 33:33:00:00:00:01 dev br0 self permanent 02:00:00:12:01:04 dev br0 vlan 1 master br0 permanent 02:00:00:12:01:04 dev br0 master br0 permanent [root@localhost bridge]# # filter by bridge [root@localhost bridge]# ./bridge fdb show br br0 f2:46:50:85:6d:d9 dev dummy0 master br0 permanent f2:46:50:85:6d:d9 dev dummy0 vlan 1 master br0 permanent 33:33:00:00:00:01 dev dummy0 self permanent f1:f2:f3:f4:f5:f6 dev dummy0 self permanent 33:33:00:00:00:01 dev br0 self permanent 02:00:00:12:01:04 dev br0 vlan 1 master br0 permanent 02:00:00:12:01:04 dev br0 master br0 permanent [root@localhost bridge]# # filter by port [root@localhost bridge]# ./bridge fdb show brport dummy0 f2:46:50:85:6d:d9 master br0 permanent f2:46:50:85:6d:d9 vlan 1 master br0 permanent 33:33:00:00:00:01 self permanent f1:f2:f3:f4:f5:f6 self permanent [root@localhost bridge]# # filter by port + bridge [root@localhost bridge]# ./bridge fdb show br br0 brport dummy0 f2:46:50:85:6d:d9 master br0 permanent f2:46:50:85:6d:d9 vlan 1 master br0 permanent 33:33:00:00:00:01 self permanent f1:f2:f3:f4:f5:f6 self permanent [root@localhost bridge]# Signed-off-by:
Hubert Sokolowski <hubert.sokolowski@intel.com> Signed-off-by:
-
David S. Miller authored
Tom Herbert says: ==================== ip: Support checksum returned in csmg This patch set allows the packet checksum for a datagram socket to be returned in csum data in recvmsg. This allows userspace to implement its own checksum over the data, for instance if an IP tunnel was be implemented in user space, the inner checksum could be validated. Changes in this patch set: - Move checksum conversion to inet_sock from udp_sock. This generalizes checksum conversion for use with other protocols. - Move IP cmsg constants to a header file and make processing of the flags more efficient in ip_cmsg_recv - Return checksum value in cmsg. This is specifically the unfolded 32 bit checksum of the full packet starting from the first byte returned in recvmsg Tested: Wrote a little server to get checksums in cmsg for UDP and verfied correct checksum is returned. ==================== Signed-off-by: -
Tom Herbert authored
Add ip_cmsg_recv_offset function which takes an offset argument that indicates the starting offset in skb where data is being received from. This will be useful in the case of UDP and provided checksum to user space. ip_cmsg_recv is an inline call to ip_cmsg_recv_offset with offset of zero. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Tom Herbert authored
Add ip_cmsg_recv_offset function which takes an offset argument that indicates the starting offset in skb where data is being received from. This will be useful in the case of UDP and provided checksum to user space. ip_cmsg_recv is an inline call to ip_cmsg_recv_offset with offset of zero. Signed-off-by:
-
Tom Herbert authored
Move the IP_CMSG_* constants from ip_sockglue.c to inet_sock.h so that they can be referenced in other source files. Restructure ip_cmsg_recv to not go through flags using shift, check for flags by 'and'. This eliminates both the shift and a conditional per flag check. Signed-off-by:
-
Tom Herbert authored
Move convert_csum from udp_sock to inet_sock. This allows the possibility that we can use convert checksum for different types of sockets and also allows convert checksum to be enabled from inet layer (what we'll want to do when enabling IP_CHECKSUM cmsg). Signed-off-by:
-
Thomas Graf authored
Calling nla_nest_cancel() in a different order as the nesting was built up can lead to negative offsets being calculated which results in skb_trim() being called with an underflowed unsigned int. Warn if mark < skb->data as it's definitely a bug. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
- 05 Jan, 2015 17 commits
-
-
David S. Miller authored
Hariprasad Shenai says: ==================== RDMA/cxgb4/cxgb4vf/csiostor: Cleanup register defines This series continues to cleanup all the macros/register defines related to SGE, PCIE, MC, MA, TCAM, MAC, etc that are defined in t4_regs.h and the affected files. Will post another 1 or 2 series so that we can cover all the macros so that they all follow the same style to be consistent. The patches series is created against 'net-next' tree. And includes patches on cxgb4, cxgb4vf, iw_cxgb4 and csiostor driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
This patch cleanups all PL, XGMAC and SF related macros/register defines that are defined in t4_regs.h and the affected files Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
This patch cleanups all TP, MPS and TCAM related macros/register defines that are defined in t4_regs.h and the affected files Signed-off-by:
-
Hariprasad Shenai authored
This patch cleanups all MC, MA and CIM related macros/register defines that are defined in t4_regs.h and the affected files. Signed-off-by:
-
Hariprasad Shenai authored
This patch cleansup remaining SGE related macros/register defines and all PCI related ones that are defined in t4_regs.h and the affected files. Signed-off-by:
-
Hariprasad Shenai authored
This patch cleanups all SGE related macros/register defines that are defined in t4_regs.h and the affected files. Signed-off-by:
-
Sathya Perla authored
This patch uses skb->xmit_more flag to batch TX requests. TX is flushed either when xmit_more is false or there is no more space in the TXQ. Skyhawk-R and BEx chips require an even number of wrbs to be posted. So, when a batch of TX requests is accumulated, the last header wrb may need to be fixed with an extra dummy wrb. This patch refactors be_xmit() routine as a sequence of be_xmit_enqueue() and be_xmit_flush() calls. The Tx completion code is also updated to be able to unmap/free a batch of skbs rather than a single skb. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Ying Xue authored
Fixup below build error: include/linux/list_nulls.h: In function ‘hlist_nulls_del’: include/linux/list_nulls.h:84:13: error: ‘LIST_POISON2’ undeclared (first use in this function) Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Ying Xue authored
Fixup below build error: include/linux/rhashtable.h: At top level: include/linux/rhashtable.h:118:34: error: field ‘mutex’ has incomplete type Signed-off-by:
-
Joe Perches authored
Use normal facilities to avoid printing each byte on a separate line. Now emits at KERN_DEBUG instead of KERN_INFO. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
When running in kdump kernel, reduce number of resources used by the driver. This will enable NIC to operate in low memory kdump kernel environment. Also change the driver version to .83 Signed-off-by:
Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by:
-
David S. Miller authored
Jesse Gross says: ==================== Geneve Cleanups Much of the basis for the Geneve code comes from VXLAN. However, Geneve is quite a bit simpler than VXLAN and so this cleans up a lot of the infrastruction - particularly around locking - where the extra complexity is not necessary. ==================== Signed-off-by: -
Jesse Gross authored
When searching for an existing socket to reuse, the address family is not taken into account - only port number. This means that an IPv4 socket could be used for IPv6 traffic and vice versa, which is sure to cause problems when passing packets. It is not possible to trigger this problem currently because the only user of Geneve creates just IPv4 sockets. However, that is likely to change in the near future. Signed-off-by:
Jesse Gross <jesse@nicira.com> Signed-off-by:
-
Jesse Gross authored
The hash table for open Geneve ports is used only on creation and deletion time. It is not performance critical and is not likely to grow to a large number of items. Therefore, this can be changed to use a simple linked list. Signed-off-by:
-
Jesse Gross authored
The existing Geneve locking scheme was pulled over directly from VXLAN. However, VXLAN has a number of built in mechanisms which make the locking more complex and are unlikely to be necessary with Geneve. This simplifies the locking to use a basic scheme of a mutex when doing updates plus RCU on receive. In addition to making the code easier to read, this also avoids the possibility of a race when creating or destroying sockets since UDP sockets and the list of Geneve sockets are protected by different locks. After this change, the entire operation is atomic. Signed-off-by:
-
Jesse Gross authored
The work queue is used only to free the UDP socket upon destruction. This is not necessary with Geneve and generally makes the code more difficult to reason about. It also introduces nondeterministic behavior such as when a socket is rapidly deleted and recreated, which could fail as the the deletion happens asynchronously. Signed-off-by:
-
- 03 Jan, 2015 10 commits
-
-
David S. Miller authored
Thomas Graf says: ==================== rhashtable: Per bucket locks & deferred table resizing Prepares for and introduces per bucket spinlocks and deferred table resizing. This allows for parallel table mutations in different hash buckets from atomic context. The resizing occurs in the background in a separate worker thread while lookups, inserts, and removals can continue. Also modified the chain linked list to be terminated with a special nulls marker to allow entries to move between multiple lists. Last but not least, reintroduces lockless netlink_lookup() with deferred Netlink socket destruction to avoid the side effect of increased netlink_release() runtime. ==================== Signed-off-by: -
Thomas Graf authored
Defers the release of the socket reference using call_rcu() to allow using an RCU read-side protected call to rhashtable_lookup() This restores behaviour and performance gains as previously introduced by e341694e ("netlink: Convert netlink_lookup() to use RCU protected hash table") without the side effect of severely delayed socket destruction. Signed-off-by:
-
Thomas Graf authored
In order to allow for wider usage of rhashtable, use a special nulls marker to terminate each chain. The reason for not using the existing nulls_list is that the prev pointer usage would not be valid as entries can be linked in two different buckets at the same time. The 4 nulls base bits can be set through the rhashtable_params structure like this: struct rhashtable_params params = { [...] .nulls_base = (1U << RHT_BASE_SHIFT), }; This reduces the hash length from 32 bits to 27 bits. Signed-off-by: -
Thomas Graf authored
Introduces an array of spinlocks to protect bucket mutations. The number of spinlocks per CPU is configurable and selected based on the hash of the bucket. This allows for parallel insertions and removals of entries which do not share a lock. The patch also defers expansion and shrinking to a worker queue which allows insertion and removal from atomic context. Insertions and deletions may occur in parallel to it and are only held up briefly while the particular bucket is linked or unzipped. Mutations of the bucket table pointer is protected by a new mutex, read access is RCU protected. In the event of an expansion or shrinking, the new bucket table allocated is exposed as a so called future table as soon as the resize process starts. Lookups, deletions, and insertions will briefly use both tables. The future table becomes the main table after an RCU grace period and initial linking of the old to the new table was performed. Optimization of the chains to make use of the new number of buckets follows only the new table is in use. The side effect of this is that during that RCU grace period, a bucket traversal using any rht_for_each() variant on the main table will not see any insertions performed during the RCU grace period which would at that point land in the future table. The lookup will see them as it searches both tables if needed. Having multiple insertions and removals occur in parallel requires nelems to become an atomic counter. Signed-off-by:
-
Thomas Graf authored
Signed-off-by:
-
Thomas Graf authored
The removal function of nft_hash currently stores a reference to the previous element during lookup which is used to optimize removal later on. This was possible because a lock is held throughout calling rhashtable_lookup() and rhashtable_remove(). With the introdution of deferred table resizing in parallel to lookups and insertions, the nftables lock will no longer synchronize all table mutations and the stored pprev may become invalid. Removing this optimization makes removal slightly more expensive on average but allows taking the resize cost out of the insert and remove path. Signed-off-by:
-
Thomas Graf authored
Subsequent patches will require access to the bucket tail. Access to the tail is relatively cheap as the automatic resizing of the table should keep the number of entries per bucket to no more than 0.75 on average. Signed-off-by:
-
Thomas Graf authored
This patch is in preparation to introduce per bucket spinlocks. It extends all iterator macros to take the bucket table and bucket index. It also introduces a new rht_dereference_bucket() to handle protected accesses to buckets. It introduces a barrier() to the RCU iterators to the prevent the compiler from caching the first element. The lockdep verifier is introduced as stub which always succeeds and properly implement in the next patch when the locks are introduced. Signed-off-by:
-
Thomas Graf authored
Signed-off-by:
-
Thomas Graf authored
Hash the key inside of rhashtable_lookup_compare() like rhashtable_lookup() does. This allows to simplify the hashing functions and keep them private. Signed-off-by:
-
- 02 Jan, 2015 1 commit
-
-
David S. Miller authored
Richard Cochran says: ==================== Fixing the "Time Counter fixes and improvements" For this series I had only tested the build with ARCH=x86 and arm, but others like sparc64, microblaze, powerpc, and s390 will fail because they somehow don't indirectly include clocksource.h for the drivers in question. This series fixes the build issues reported by: kbuild test robot <fengguang.wu@intel.com> ==================== Signed-off-by:
-
