- 30 Oct, 2008 27 commits
-
-
Christoph Hellwig authored
xfs_bmbt_newroot is a mostly generic implementation of moving from an inode root to a real block based root. So move it to xfs_btree.c where it can use all the nice infrastructure there and make it pointer size agnostic The new name for it is xfs_btree_new_iroot, following the old naming but making it clear we're dealing with the root in inode case here, and to avoid confusion with xfs_btree_new_root which is used for the not inode rooted case. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32201a Signed-off-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Lachlan McIlroy <lachlan@sgi.com> Signed-off-by:
Bill O'Donnell <billodo@sgi.com> Signed-off-by:
David Chinner <david@fromorbit.com>
-
Christoph Hellwig authored
From: Dave Chinner <dgc@sgi.com> Add a xfs_btree_new_root helper for the alloc and ialloc btrees. The bmap btree needs it's own version and is not converted. [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32200a Signed-off-by:
-
Christoph Hellwig authored
Make the btree split code generic. Based on a patch from David Chinner with lots of changes to follow the original btree implementations more closely. While this loses some of the generic helper routines for inserting/moving/removing records it also solves some of the one off bugs in the original code and makes it easier to verify. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32198a Signed-off-by:
-
Christoph Hellwig authored
Make the btree left shift code generic. Based on a patch from David Chinner with lots of changes to follow the original btree implementations more closely. While this loses some of the generic helper routines for inserting/moving/removing records it also solves some of the one off bugs in the original code and makes it easier to verify. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32197a Signed-off-by:
-
Christoph Hellwig authored
Make the btree right shift code generic. Based on a patch from David Chinner with lots of changes to follow the original btree implementations more closely. While this loses some of the generic helper routines for inserting/moving/removing records it also solves some of the one off bugs in the original code and makes it easier to verify. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32196a Signed-off-by:
-
Christoph Hellwig authored
From: Dave Chinner <dgc@sgi.com> The most complicated part here is the lastrec tracking for the alloc btree. Most logic is in the update_lastrec method which has to do some hopefully good enough dirty magic to maintain it. [hch: split out from bigger patch and a rework of the lastrec logic] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32194a Signed-off-by:
-
Christoph Hellwig authored
From: Dave Chinner <dgc@sgi.com> Note that there are many > 80 char lines introduced due to the xfs_btree_key casts. But the places where this happens is throw-away code once the whole btree code gets merged into a common implementation. The same is true for the temporary xfs_alloc_log_keys define to the new name. All old users will be gone after a few patches. [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32193a Signed-off-by:
-
Christoph Hellwig authored
From: Dave Chinner <dgc@sgi.com> [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32192a Signed-off-by:
-
Christoph Hellwig authored
From: Dave Chinner <dgc@sgi.com> [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32191a Signed-off-by:
-
Christoph Hellwig authored
From: Dave Chinner <dgc@sgi.com> Because this is the first major generic btree routine this patch includes some infrastrucure, first a few routines to deal with a btree block that can be either in short or long form, second xfs_btree_read_buf_block, which is the new central routine to read a btree block given a cursor, and third the new xfs_btree_ptr_addr routine to calculate the address for a given btree pointer record. [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32190a Signed-off-by:
-
Christoph Hellwig authored
Add new helpers in xfs_btree.c to find the record, key and block pointer entries inside a btree block. To implement this genericly the ->get_maxrecs methods and two new xfs_btree_ops entries for the key and record sizes are used. Also add a big comment describing how the addressing inside a btree block works. Note that these helpers are unused until users are introduced in the next patches and this patch will thus cause some harmless compiler warnings. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32189a Signed-off-by:
-
Christoph Hellwig authored
Factor xfs_btree_maxrecs into a per-btree operation. The get_maxrecs method is based on a patch from Dave Chinner. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32188a Signed-off-by:
-
Christoph Hellwig authored
Make the existing bmap btree tracing generic so that it applies to all btree types. Some fragments lifted from a patch by Dave Chinner. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32187a Signed-off-by:
-
David Chinner authored
From: Dave Chinner <dgc@sgi.com> Introduce statistics coverage of all the btrees and cover all the btree operations, not just some. Invaluable for determining test code coverage of all the btree operations.... SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32184a Signed-off-by:
-
Christoph Hellwig authored
Move the various btree validation helpers around in xfs_btree.c so that they are close to each other and in common #ifdef DEBUG sections. Also add a new xfs_btree_check_ptr helper to check a btree ptr that can be either long or short form. Split out from a bigger patch from Dave Chinner with various small changes applied by me. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32183a Signed-off-by:
-
Christoph Hellwig authored
From: Dave Chinner <dgc@sgi.com> Refactor xfs_btree_readahead to make it more readable: (a) remove the inline xfs_btree_readahead wrapper and move all checks out of line into the main routine. (b) factor out helpers for short/long form btrees (c) move check for root in inodes from the callers into xfs_btree_readahead [hch: split out from a big patch and minor cleanups] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32182a Signed-off-by:
-
Christoph Hellwig authored
Add a flag to the xfs btree cursor when using long (64bit) block pointers instead of checking btnum == XFS_BTNUM_BMAP. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32181a Signed-off-by:
-
Christoph Hellwig authored
The bmap btree is rooted in the inode and not in a disk block. Make the support for this feature more generic by adding a btree flag to for this feature instead of relying on the XFS_BTNUM_BMAP btnum check. Also clean up xfs_btree_get_block where this new flag is used. Based upon a patch from Dave Chinner. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32180a Signed-off-by:
-
Christoph Hellwig authored
Add generic union types for btree pointers, keys and records. The generic btree pointer contains either a 32 and 64bit big endian scalar for short and long form btrees, and the key and record contain the relevant type for each possible btree. Split out from a bigger patch from Dave Chinner and simplified a little further. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32178a Signed-off-by:
-
Christoph Hellwig authored
xfs_btree_init_cursor contains close to little shared code for the different btrees and will get even more non-common code in the future. Split it up into one routine per btree type. Because xfs_btree_dup_cursor needs to call the init routine for a generic btree cursor add a new btree operation vector that contains a dup_cursor method that initializes a new cursor based on an existing one. The btree operations vector is based on an idea and code from Dave Chinner and will grow more entries later during this series. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32176a Signed-off-by:
-
Christoph Hellwig authored
This type is only embedded in struct xfs_btree_block and never used directly. By moving the fields directly into struct xfs_btree_block a lot of the macros for struct xfs_btree_sblock and struct xfs_btree_lblock can be used for struct xfs_btree_block too now which helps greatly with some of the migrations during implementing the generic btree code. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32174a Signed-off-by:
-
Lachlan McIlroy authored
Lock debugging reported the ilock was being destroyed without being unlocked. We don't need to lock the inode until we are going to insert it into the radix tree. SGI-PV: 987246 SGI-Modid: xfs-linux-melb:xfs-kern:32159a Signed-off-by:
-
Lachlan McIlroy authored
Destroying the quota stuff on unmount can access the log - ie XFS_QM_DONE() ends up in xfs_dqunlock() which calls xfs_trans_unlocked_item() and then xfs_log_move_tail(). By this time the log has already been destroyed. Just move the cleanup of the quota code earlier in xfs_unmountfs() before the call to xfs_log_unmount(). Moving XFS_QM_DONE() up near XFS_QM_DQPURGEALL() seems like a good spot. SGI-PV: 987086 SGI-Modid: xfs-linux-melb:xfs-kern:32148a Signed-off-by:
Peter Leckie <pleckie@sgi.com>
-
Barry Naujok authored
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:32002a Signed-off-by:
Barry Naujok <bnaujok@sgi.com> Signed-off-by:
-
Lachlan McIlroy authored
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31927a Signed-off-by:
-
Lachlan McIlroy authored
kmem cache constructor no longer takes a kmem_zone_t argument. SGI-PV: 957103 SGI-Modid: xfs-linux-melb:xfs-kern:32254a Signed-off-by: -
David Chinner authored
To avoid having to initialise some fields of the XFS inode on every allocation, we can use the slab init-once feature to initialise them. All we have to guarantee is that when we free the inode, all it's entries are in the initial state. Add asserts where possible to ensure debug kernels check this initial state before freeing and after allocation. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31925a Signed-off-by:
-
- 28 Oct, 2008 13 commits
-
-
Linus Torvalds authored
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits) ftrace: fix current_tracer error return tracing: fix a build error on alpha ftrace: use a real variable for ftrace_nop in x86 tracing/ftrace: make boot tracer select the sched_switch tracer tracepoint: check if the probe has been registered asm-generic: define DIE_OOPS in asm-generic trace: fix printk warning for u64 ftrace: warning in kernel/trace/ftrace.c ftrace: fix build failure ftrace, powerpc, sparc64, x86: remove notrace from arch ftrace file ftrace: remove ftrace hash ftrace: remove mcount set ftrace: remove daemon ftrace: disable dynamic ftrace for all archs that use daemon ftrace: add ftrace warn on to disable ftrace ftrace: only have ftrace_kill atomic ftrace: use probe_kernel ftrace: comment arch ftrace code ftrace: return error on failed modified text. ftrace: dynamic ftrace process only text section ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvmLinus Torvalds authored
* 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: ia64: Makefile fix for forcing to re-generate asm-offsets.h KVM: Future-proof device assignment ABI KVM: ia64: Fix halt emulation logic KVM: Fix guest shared interrupt with in-kernel irqchip KVM: MMU: sync root on paravirt TLB flush
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: fix irqs on/off ip tracing lockdep: minor fix for debug_show_all_locks() x86: restore the old swiotlb alloc_coherent behavior x86: use GFP_DMA for 24bit coherent_dma_mask swiotlb: remove panic for alloc_coherent failure xen: compilation fix of drivers/xen/events.c on IA64 xen: portability clean up and some minor clean up for xencomm.c xen: don't reload cr3 on suspend kernel/resource: fix reserve_region_with_split() section mismatch printk: remove unused code from kernel/printk.c
-
Linus Torvalds authored
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: make variable static
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: fix documentation reference for sched_min_granularity_ns sched: virtual time buddy preemption sched: re-instate vruntime based wakeup preemption sched: weaken sync hint sched: more accurate min_vruntime accounting sched: fix a find_busiest_group buglet sched: add CONFIG_SMP consistency
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, memory hotplug: remove wrong -1 in calling init_memory_mapping() x86: keep the /proc/meminfo page count correct x86/uv: memory allocation at initialization xen: fix Xen domU boot with batched mprotect
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] s390: Fix build for !CONFIG_S390_GUEST + CONFIG_VIRTIO_CONSOLE [S390] No more 4kb stacks. [S390] Change default IPL method to IPL_VM. [S390] tape: disable interrupts in tape_open and tape_release [S390] appldata: unsigned ops->size cannot be negative [S390] tape block: complete request with correct locking [S390] Fix sysdev class file creation. [S390] pgtables: Fix race in enable_sie vs. page table ops [S390] qdio: remove incorrect memset [S390] qdio: prevent double qdio shutdown in case of I/O errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: ahci enclosure management bit mask libata: ahci enclosure management led sync pata_ninja32: suspend/resume support libata: Fix LBA48 on pata_it821x RAID volumes. libata: clear saved xfer_mode and ncq_enabled on device detach sata_sil24: configure max read request size to 4k libata: add missing kernel-doc libata: fix device iteration bugs ahci: Add support for Promise PDC42819 ata: Switch all my stuff to a common address
-
Steven Rostedt authored
The commit (in linux-tip) c2931e05 ( ftrace: return an error when setting a nonexistent tracer ) added useful code that would error when a bad tracer was written into the current_tracer file. But this had a bug if the amount written was more than the amount read by that code. The first iteration would set the tracer correctly, but since it did not consume the rest of what was written (usually whitespace), the userspace utility would continue to write what was not consumed. This second iteration would fail to find a tracer and return -EINVAL. Funny thing is that the tracer would have already been set. This patch just consumes all the data that is written to the file. Signed-off-by:
Steven Rostedt <srostedt@redhat.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Xiantao Zhang authored
To avoid using stale asm-offsets.h. Signed-off-by:
Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Reserve some space so we can add more data. Signed-off-by:Avi Kivity <avi@qumranet.com>
-
Xiantao Zhang authored
Common halt logic was changed by x86 and did not update ia64. This patch updates halt for ia64. Fixes a regression causing guests to hang with more than 2 vcpus. Signed-off-by:
-
Sheng Yang authored
Every call of kvm_set_irq() should offer an irq_source_id, which is allocated by kvm_request_irq_source_id(). Based on irq_source_id, we identify the irq source and implement logical OR for shared level interrupts. The allocated irq_source_id can be freed by kvm_free_irq_source_id(). Currently, we support at most sizeof(unsigned long) different irq sources. [Amit: - rebase to kvm.git HEAD - move definition of KVM_USERSPACE_IRQ_SOURCE_ID to common file - move kvm_request_irq_source_id to the update_irq ioctl] [Xiantao: - Add kvm/ia64 stuff and make it work for kvm/ia64 guests] Signed-off-by:Sheng Yang <sheng@linux.intel.com> Signed-off-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
-
