- 30 Jun, 2004 36 commits
-
-
Pantelis Antoniou authored
-
Dale Farnsworth authored
Hi, Patch 2 of 2 to enable the smc91x driver to be used by the IBM Redwood5 and Redwood6 boards. Enable smc91x driver to support IBM Redwood5 and Redwood6 boards Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
-
Dale Farnsworth authored
Hi, Patch 1 of 2 to enable the smc91x driver to be used by the IBM Redwood5 and Redwood6 boards. Move drivers/net/arm/smc91x.[ch] to drivers/net Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
-
Russell King authored
This is a rather old patch which re-orders the teardown of PCMCIA network devices. Current device drivers remove the IO mappings, interrupts, and free any PCMCIA windows before they unregister themselves from the network layer. This patch ensures that we first unregister from the network layer before performing any teardown of resources or windows. Note: the only card which has been tested in this patch is pcnet_cs.
-
Stephen Hemminger authored
Several network drivers have checks that they are only built with -O. This breaks checking with sparse and other tools, and seems like a holdover from when drivers were built out of tree and the kernel build system was less stable. This patch gets rid of these. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
-
Stephen Hemminger authored
Several drivers use '#if DEBUG' which is a warning under the sparse checker. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
-
Stephen Hemminger authored
Add __user annotation to the device specific ioctl.
-
Stephen Hemminger authored
This started out from sparse warnings about calling with fddi_broadcast that is declared const. This fixes that and gets rid of some of the namespace pollution of this driver by moving the predicate function is_individual, is_broadcast, ... as inline's in the one file that uses them. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
-
Andrew Morton authored
From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br> drivers/net/ne2.c does not compile without CONFIG_MCA_LEGACY set. As CONFIG_MCA_LEGACY depends on CONFIG_MCA, we can use only CONFIG_MCA_LEGACY, insteed of "MCA && MCA_LEGACY". Signed-off-by: Luiz Capitulino <lcapitulino@prefeitura.sp.gov.br> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Andrew Morton authored
From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br> drivers/net/at1700.c does not compile without CONFIG_MCA_LEGACY set. As CONFIG_MCA_LEGACY depends on CONFIG_MCA, we can use only CONFIG_MCA_LEGACY, insteed of "MCA && MCA_LEGACY". Signed-off-by: Luiz Capitulino <lcapitulino@prefeitura.sp.gov.br> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Don Fry authored
Change the pcnet32 driver to use module_param and module_param_array.
-
Don Fry authored
The pcnet32 driver was not correctly enabling MII autonegotiation after booting when ppc firmware forced the speed/duplex mode of the chip. After several conversations with AMD this patch corrects the problem. I have tested this on hardware I have available (ia32 and ppc64) but I would like wider audience testing of this patch. Signed-off-by: Don Fry <brazilnut@us.ibm.com>
-
Don Fry authored
This patch adds a module parameter to select HomePNA mode of operation for the 79C978 version of the pcnet32. Tested ia32 and ppc64. signed-off-by: Patrick Simmons <psimmons@flash.net> signed-off-by: Don Fry <brazilnut@us.ibm.com>
-
Don Fry authored
A recent change I made broke pcnet32 in a way that allowed real hardware to work, but broke VMWare. This patch acknowledges all interrupts early in the pcnet32_interrupt while loop. Without this patch on real hardware the first transmit operation would clear the 'init' interrupt, but in VMWare it would rain interrupts. Keith Moore did more testing for me on VMWare and I did a better job testing on hardware. Petr Vandrovec correctly pointed out the source of the problem on lkml. This patch is not needed for 2.4.27-rc1 unless my patch labeled "pcnet32: recover after rx hang" is applied (which it has not). signed-off-by: Don Fry <brazilnut@us.ibm.com>
-
Margit Schubert-While authored
2004-06-28 Margit Schubert-While <margitsw@t-online.de> * Use set_pci_mwi()
-
Margit Schubert-While authored
2004-06-28 Margit Schubert-While <margitsw@t-online.de> * Don't poke around in the timeout registers
-
Margit Schubert-While authored
2004-06-28 Margit Schubert-While <margitsw@t-online.de> * Clean up the device table
-
Margit Schubert-While authored
2004-06-28 Margit Schubert-While <margitsw@t-online.de> * Fix a thinko by me
-
Margit Schubert-While authored
2004-06-28 Margit Schubert-While <margitsw@t-online.de> * Missing error check after dev_alloc_skb
-
Margit Schubert-While authored
2004-06-28 Margit Schubert-While <margitsw@t-online.de> * Clean up function definitions (missing static, extraneous inline)
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Nicolas Pitre authored
Patch from Nicolas Pitre Missing prototype.
-
Nicolas Pitre authored
Patch from Nicolas Pitre ... and a comment fix in bonus
-
Tony Lindgren authored
Patch from Tony Lindgren Removes some dead code as noted by Russell King.
-
bk://linux-dj.bkbits.net/agpgartLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Dave Jones authored
Signed-off-by: Kris Kersey <augustus@linuxhardware.org> Signed-off-by: Dave Jones <davej@redhat.com>
-
Mika Kukkonen authored
-
Mika Kukkonen authored
-
Mika Kukkonen authored
-
Mika Kukkonen authored
-
Mika Kukkonen authored
-
Mika Kukkonen authored
-
Mika Kukkonen authored
-
Mika Kukkonen authored
-
Mika Kukkonen authored
-
Dave Jones authored
Signed-off-by: Dave Jones <davej@redhat.com>
-
- 29 Jun, 2004 4 commits
-
-
bk://cifs.bkbits.net/linux-2.5cifsLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Linus Torvalds authored
Use NULL, not 0, where appropriate.
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Russell King authored
- Remove 'arc' machine name from Makefile - clk_set_rate() should return non-zero atm. - proc-sa1100.S doesn't need asm/ptrace.h - update mach-types - kill line of spaces in clock.h
-