- 04 Mar, 2022 1 commit
-
-
Rob Herring authored
While the DT Spec says 'cpu-release-addr' is always 64-bit, some 32-bit Arm DTs used a 32-bit value. We're now stuck with those cases, so add uint32 as a valid type. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220303165710.1859862-1-robh@kernel.org
-
- 03 Mar, 2022 1 commit
-
-
Rob Herring authored
DT_SCHEMA_FILES is currently restricted to a list of exact files with the full source tree path (i.e. Documentation/devicetree/bindings/...). Loosen this requirement and let DT_SCHEMA_FILES be a partial match. With this, checking all schema files in a directory is possible: $ make DT_SCHEMA_FILES=/gpio/ dt_binding_check Or all schema files with 'qcom' in the path or filename: $ make DT_SCHEMA_FILES=qcom dt_binding_check Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
- 02 Mar, 2022 1 commit
-
-
Rob Herring authored
Another pass at removing unnecessary use of 'allOf' with a '$ref'. json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Guenter Roeck <groeck@chromium.org> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-By:
Vinod Koul <vkoul@kernel.org> Acked-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
Marek Behún <kabel@kernel.org> Acked-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Jakub Kicinski <kuba@kernel.org> Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220228213802.1639658-1-robh@kernel.org
-
- 01 Mar, 2022 5 commits
-
-
Lad Prabhakar authored
Document RZ/V2L (R9A07G054) SoC bindings. USBHS block is identical to one found on RZ/A2 SoC. No driver changes are required as generic compatible string "renesas,rza2-usbhs" will be used as a fallback. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Lad Prabhakar authored
Add device tree binding document for RZ/V2L USBPHY Control Device. RZ/V2L USBPHY Control Device is identical to one found on the RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,rzg2l-usbphy-ctrl" will be used as a fallback. Signed-off-by:
-
Lad Prabhakar authored
Document the General Timer Module(a.k.a OSTM) found on the RZ/V2L SoC. OSTM module is identical to one found RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,ostm" will be used as a fallback. Signed-off-by:
-
Lad Prabhakar authored
Document RZ/V2L I2C bindings. RZ/V2L I2C is identical to one found on the RZ/G2L SoC. No driver changes are required as RZ/G2L compatible string "renesas,riic-rz" will be used as a fallback. Signed-off-by:
-
Lad Prabhakar authored
Document RZ/V2L CANFD bindings. RZ/V2L CANFD is identical to one found on the RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,rzg2l-canfd" will be used as a fallback. Signed-off-by:
-
- 28 Feb, 2022 3 commits
-
-
Frank Rowand authored
If unittest detects a problem it will print a warning or error message to the console. Unittest also triggers warning and error messages from other kernel code as a result of intentionally bad unittest data. This has led to confusion as to whether the triggered messages are an expected result of a test or whether there is a real problem that is independent of unittest. EXPECT messages were added to unittest to report each triggered message that is expected, resulting in verbose console output. scripts/dtc/of_unittest is a new program that processes the EXPECT messages to determine whether the triggered messages occurred and also removes the excess verbosity of the EXPECT messages. More information is available from 'scripts/dtc/of_unittest_expect --help'. Signed-off-by:
Frank Rowand <frank.rowand@sony.com> Signed-off-by:
-
Geert Uytterhoeven authored
To improve human readability and enable automatic validation, the tuples in "interrupts-extended" properties should be grouped using angle brackets. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Anup Patel <anup@brainfault.org> Signed-off-by:
-
Geert Uytterhoeven authored
The number of interrupts lacks an upper bound, thus assuming one, causing properly grouped "interrupts-extended" properties to be flagged as an error by "make dtbs_check". Fix this by adding the missing "maxItems", using the architectural maximum of 4095 interrupts. Signed-off-by:
-
- 24 Feb, 2022 3 commits
-
-
Robin Murphy authored
The "restricted-dma-pool" definition prohibits combination with either of the "no-map" and "reusable" properties, but this is only stated in the description text. Add those constraints to the schema so we can properly validate them. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Extend the example with: - an array where each element has constraints (min/max value), - property not allowed in case of different compatible. Signed-off-by:
-
Krzysztof Kozlowski authored
Installing dtschema from github.com/devicetree-org is not needed anymore because dtschema is now part of regular PyPI repository. In certain cases it might cause some troubles as it brings latest master version, not the stable release: $ pip3 show dtschema Version: 2020.8.2.dev4+g341f3e3 $ make dt_binding_check dtschema minimum version is v2020.8.1 Reported-by:Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
- 22 Feb, 2022 3 commits
-
-
Krzysztof Kozlowski authored
The "synopsys" prefix and "synopsys,dwc3" compatible are deprecated. Signed-off-by:
-
Krzysztof Kozlowski authored
There are few bindings with compatibles starting with a "synopsys" prefix. Document it as deprecated, to be sure no new usages will appear. Signed-off-by:
-
Krzysztof Kozlowski authored
There are few boards DTS using "hisi,rst-syscon" property - undocumented "hisi" prefix. The property will not be changed in DTS to non-deprecated one, because of compatibility reasons. Add deprecated "hisi" prefix to silence DT schema warnings. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: David Heidelberg <david@ixit.cz> Signed-off-by:
David Heidelberg <david@ixit.cz> Reviewed-by:
Wei Xu <xuwei5@hisilicon.com> Signed-off-by:
-
- 17 Feb, 2022 5 commits
-
-
Corentin Labbe authored
This patch converts ata/cortina,gemini-sata-bridge binding to yaml Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Tudor Ambarus authored
Convert Atmel SHA documentation to yaml format. With the conversion the clock and clock-names properties are made mandatory. The driver returns -EINVAL if "sha_clk" is not found, reflect that in the bindings and make the clock and clock-names properties mandatory. Update the example to better describe how one should define the dt node. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by:
-
Tudor Ambarus authored
Convert Atmel TDES documentation to yaml format. With the conversion the clock and clock-names properties are made mandatory. The driver returns -EINVAL if "tdes_clk" is not found, reflect that in the bindings and make the clock and clock-names properties mandatory. Update the example to better describe how one should define the dt node. Signed-off-by:
-
Tudor Ambarus authored
Convert Atmel AES documentation to yaml format. With the conversion the clock and clock-names properties are made mandatory. The driver returns -EINVAL if "aes_clk" is not found, reflect that in the bindings and make the clock and clock-names properties mandatory. Update the example to better describe how one should define the dt node. Signed-off-by:
-
Nick Hawkins authored
Description: This patch adds the Hewlett Packard Enterprise prefix that will be used for upcoming support in the HPE BMC GXP. Signed-off-by:
Nick Hawkins <nick.hawkins@hpe.com> Reviewed-by:
-
- 15 Feb, 2022 1 commit
-
-
Frank Rowand authored
Printing the devicetree unittest pass message for each passed test creates much console verbosity. The existing pass messages are printed at loglevel KERN_DEBUG so they will not print by default. Change default to print the pass messages at loglevel PR_INFO so they will print with the default console loglevel. The test community expects either a pass or a fail message for each test in a test suite. The messages are typically post-processed to report pass/fail results. Signed-off-by:
Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by:
-
- 11 Feb, 2022 4 commits
-
-
Fabrice Gasnier authored
Convert the ARMv7-M system timer bindings to DT schema format. Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@foss.st.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by:
-
Oleksij Rempel authored
"label" provides human readable name used on a box, board or schematic to identify Ethernet port. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Zenghui Yu authored
Correct the spelling of 'cluster1@max-freq' and fix the wrong capacity-dmips-mhz value 576 (which should be 578 instead). Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
David Heidelberg authored
Inherit valid properties from the dsi-controller. Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
- 10 Feb, 2022 3 commits
-
-
Quentin Schulz authored
Heiko does not work at Theobroma Systems anymore and the boards using those panels are downstream, maintained internally by the company, so let's relieve Heiko of maintainership duties. Cc: Heiko Stuebner <heiko@sntech.de> Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by:
Quentin Schulz <quentin.schulz@theobroma-systems.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Nicolas Ferre authored
Update according to new MAINTAINERS entry. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
-
Dinh Nguyen authored
Mute the warning from "make dtbs_check": Documentation/devicetree/bindings/net/can/bosch,m_can.example.dt.yaml: can@20e8000: bosch,mram-cfg: [[0, 0, 0, 32, 0, 0, 0, 1]] is too short Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
- 09 Feb, 2022 10 commits
-
-
Krzysztof Kozlowski authored
Convert the S3C/S5P/Exynos FIMD bindings to DT schema format. The conversion includes also updates to the bindings, matching the current DTS and Linux driver: adding optional iommus and power-domains. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Exynos5433 MIC bindings to DT schema format. The conversion includes also updates to the bindings, matching the current DTS and Linux driver: adding optional power-domains. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Exynos HDMI bindings to DT schema format. The conversion includes also updates to the bindings, matching the current DTS and Linux driver: 1. Add required properties: VDD supplies, power-domains. 2. Add optional properties: HDMI-EN supply, ports. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Exynos Mixer bindings to DT schema format. The conversion includes also updates to the bindings, matching the current DTS and Linux driver: 1. Add clocks required on Exynos4210 and Exynos4212 types of Mixer. 2. Add second memory range on Exynos4210 and Exynos4212. 3. Add interconnects, iommus and power-domains. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Exynos HDMI DDC bindings to DT schema format. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Exynos7 DECON display controller bindings to DT schema format. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Exynos5433 DECON display controller bindings to DT schema format. The conversion includes also updates to the bindings, matching the current DTS and Linux driver: 1. Require "fifo" interrupt. 2. Add "dsd" as a last clock. 3. Document "power-domains" and "iommus" properties. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Exynos HDMI PHY bindings to DT schema format and put them next to other PHYs. Signed-off-by:
-
Tony Lindgren authored
In order to prepare for fixing lots of devicetree unique_unit_address warnings for the TI clock nodes, let's add a binding for the TI clksel clocks. This allows us to move the overlapping reg properties for the component clocks to be children of the related clksel nodes. And with that we need the reg property only for the parent clksel node making the reg property unique like it should be. We want to set #clock-cells = <2> in case we ever start parsing ranges of clkcsel instances directly using a clksel driver rather than using the existing component clock drivers and child nodes. And before the devicetree files can be updated, we need to update the TI clock drivers to get the IO address from the parent clksel node. Cc: Tero Kristo <kristo@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Corentin Labbe authored
Converts net/cortina,gemini-ethernet.txt to yaml This permits to detect some missing properties like interrupts Signed-off-by:
-
