An error occurred fetching the project authors.
- 15 Jul, 2012 1 commit
-
-
Steven King authored
If we're not connecting external GPIO extenders via i2c or spi or whatever, we probably don't need GPIOLIB. If we provide an alternate implementation of the GPIOLIB functions to use when only on-chip GPIO is needed, we can change ARCH_REQUIRE_GPIOLIB to ARCH_WANTS_OPTIONAL_GPIOLIB so that GPIOLIB becomes optional. The downside is that in the GPIOLIB=n case, we lose all error checking done by gpiolib, ie multiply allocating the gpio, free'ing gpio etc., so that the only checking that can be done is if we reference a gpio on an external part. Targets that need the extra error checking can still select GPIOLIB=y. For the case where GPIOLIB=y, we can simplify the table of gpio chips to use a single chip, eliminating the tables of chips in the 5xxx.c files. The original motivation for the definition of multiple chips was to match the way many of the Coldfire variants defined their gpio as a spare array in memory. However, all this really gains us is some error checking when we request a gpio, gpiolib can check that it doesn't fall in one of the holes. If thats important, I think we can still come up with a better way of accomplishing that. Also in this patch is some general cleanup and reorganizing of the gpio header files (I'm sure I must have had a reason why I sometimes used a prefix of mcf_gpio and other times mcfgpio but for the life of me I can't think of it now). Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
- 20 May, 2012 2 commits
-
-
Greg Ungerer authored
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
-
- 08 May, 2012 1 commit
-
-
Steven King authored
Enable Coldfire QSPI support when SPI_COLDFIRE_QSPI is built as a module. This version of the patch combines changes to the config files and device.c and uses IF_ENABLED (thanks to Sam Ravnborg for the suggestion). Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
- 05 Mar, 2012 2 commits
-
-
Greg Ungerer authored
Most of the more modern ColdFire cores use the same code to reset the CPU (but it is different to most of the earlier cores). Currently that is duplicated in each of the sub-arch files. Pull out this common code and out a single copy of it with the other common reset code. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
If we make all MCF_RCR (CPU reset register) addressing consistent across all ColdFire CPU family members that use it then we will be able to remove the duplicated copies of the code that use it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
- 04 Mar, 2012 8 commits
-
-
Greg Ungerer authored
We can move the QSPI init call to the more general config_BSP() code on the 523x platorm setup code. Then we can remove the initcall code all together. We can also remove the un-needed include of mcfuart.h while we are cleaning up here too. Also I noticed that we are not calling the fec_init() code here, and we should be doing that. Put that back in too. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The ColdFire QSPI is common to quite a few ColdFire CPUs. No need to duplicate its platform setup code for every CPU family member that has it. Merge all the setup code into a single shared file. This also results in few platforms no longer needing any local platform setup code. In those cases remove the empty devices array and initcall code as well. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and code and use a single setup for all. So modify the ColdFire 523x QSPI addressing so that: . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used . move chip select definitions (CS) to appropriate header Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The ColdFire FEC is common to quite a few ColdFire CPUs. No need to duplicate its platform setup code for every CPU family member that has it. Merge all the setup code into a single shared file. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
If we make all FEC (ethernet) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all. So modify the ColdFire 523x FEC addressing so that: . FECs are numbered from 0 up . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The ColdFire UART is common to all ColdFire CPU's. No need to duplicate its platform setup code for every CPU family member. Merge all the setup code into a single shared file. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
If we make all UART addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all. So modify the ColdFire 523x UART addressing so that: . UARTs are numbered from 0 up . use a common name for IRQs used Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
With a few small changes we can make the m68knommu timer init code the same as the m68k code. By using the mach_sched_init function pointer and reworking the current timer initializers to keep track of the common m68k timer_interrupt() handler we end up with almost identical code for m68knommu. This will allow us to more easily merge the mmu and non-mmu m68k time.c in future patches. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
- 31 Mar, 2011 1 commit
-
-
Lucas De Marchi authored
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 25 Mar, 2011 1 commit
-
-
Greg Ungerer authored
There is a lot of common code that could be shared between the m68k and m68knommu arch branches. It makes sense to merge the two branches into a single directory structure so that we can more easily share that common code. This is a brute force merge, based on a script from Stephen King <sfking@fdwdc.com>, which was originally written by Arnd Bergmann <arnd@arndb.de>. > The script was inspired by the script Sam Ravnborg used to merge the > includes from m68knommu. For those files common to both arches but > differing in content, the m68k version of the file is renamed to > <file>_mm.<ext> and the m68knommu version of the file is moved into the > corresponding m68k directory and renamed <file>_no.<ext> and a small > wrapper file <file>.<ext> is used to select between the two version. Files > that are common to both but don't differ are removed from the m68knommu > tree and files and directories that are unique to the m68knommu tree are > moved to the m68k tree. Finally, the arch/m68knommu tree is removed. > > To select between the the versions of the files, the wrapper uses > > #ifdef CONFIG_MMU > #include <file>_mm.<ext> > #else > #include <file>_no.<ext> > #endif On top of this file merge I have done a simplistic merge of m68k and m68knommu Kconfig, which primarily attempts to keep existing options and menus in place. Other than a handful of options being moved it produces identical .config outputs on m68k and m68knommu targets I tested it on. With this in place there is now quite a bit of scope for merge cleanups in future patches. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
- 15 Mar, 2011 1 commit
-
-
Greg Ungerer authored
The ColdFire 523x family of CPUs does not have an MBAR register, so don't define its peripheral addresses relative to one. Its internal peripherals are relative to the IPSBAR register, so make sure to use that. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
- 17 May, 2010 1 commit
-
-
Steven King authored
Since Grant has added the coldfire-qspi driver to next-spi, here is the platform support for the parts that have qspi hardware. This sets up gpio to do the spi chip select using the default chip select pins; it should be trivial for boards that require different or additional spi chip selects to use other gpios as needed. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
- 15 Sep, 2009 2 commits
-
-
Greg Ungerer authored
The ethernet pins on the 532x ColdFire CPU family are multi-function pins. We need to enable them as ethernet pins when using the FEC ethernet driver. Bug report, and older patch, from timothee@manaud.net. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
With the common intc-2 interrupt controller code in place the ColdFire 523x family startup code can be greatly simplified. Remove all the interrupt masking code, and the per-device interrupt config here. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
- 11 Jun, 2009 1 commit
-
-
Greg Ungerer authored
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
- 27 Feb, 2009 1 commit
-
-
Greg Ungerer authored
m68knommu: add FEC platform support to ColdFire CPU's setup code Move the per-CPU FEC driver setup code into the actual platform setup code for each ColdFire CPU varient. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Feb, 2008 1 commit
-
-
Greg Ungerer authored
Switch to platform style configuration for 523x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 23 Oct, 2007 1 commit
-
-
Greg Ungerer authored
Reduce the function pointer mess of the m68knommu timer code by calling directly to the local hardware's timer setup, and expose the local common timer interrupt handler to the lower level hardware timer. Ultimately this will save definitions of all these functions across all the platform code to setup the function pointers (which for any given m68knommu CPU family member can be only one set of hardware timer functions). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 26 Jul, 2007 1 commit
-
-
Greg Ungerer authored
The switch to using the generic irq framework removed the coldfire_trap_init() code, so remove all references to it. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 25 Jul, 2007 1 commit
-
-
Greg Ungerer authored
Currently most of the m68knommu cpu/board setup files are handling the setup of fixed boot parameters (via CONFIG_BOOTPARAM) themselves. Move all this into the common setup code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 09 Feb, 2007 1 commit
-
-
Greg Ungerer authored
Use irq_handler_t for passing clock handler routine around. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 30 Jun, 2006 1 commit
-
-
Jörn Engel authored
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
-
- 02 Sep, 2005 1 commit
-
-
Greg Ungerer authored
Low level initialization code for the 523x ColdFire processor family. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 16 Apr, 2005 1 commit
-
-
Linus Torvalds authored
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-